]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - arch/powerpc/include/asm/u-boot.h
Add GPL-2.0+ SPDX-License-Identifier to source files
[karo-tx-uboot.git] / arch / powerpc / include / asm / u-boot.h
1 /*
2  * (C) Copyright 2000 - 2002
3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  ********************************************************************
7  * NOTE: This header file defines an interface to U-Boot. Including
8  * this (unmodified) header file in another file is considered normal
9  * use of U-Boot, and does *not* fall under the heading of "derived
10  * work".
11  ********************************************************************
12  */
13
14 #ifndef __U_BOOT_H__
15 #define __U_BOOT_H__
16
17 /*
18  * Board information passed to Linux kernel from U-Boot
19  *
20  * include/asm-ppc/u-boot.h
21  */
22
23 #ifdef CONFIG_SYS_GENERIC_BOARD
24 /* Use the generic board which requires a unified bd_info */
25 #include <asm-generic/u-boot.h>
26 #else
27
28 #ifndef __ASSEMBLY__
29
30 typedef struct bd_info {
31         unsigned long   bi_memstart;    /* start of DRAM memory */
32         phys_size_t     bi_memsize;     /* size  of DRAM memory in bytes */
33         unsigned long   bi_flashstart;  /* start of FLASH memory */
34         unsigned long   bi_flashsize;   /* size  of FLASH memory */
35         unsigned long   bi_flashoffset; /* reserved area for startup monitor */
36         unsigned long   bi_sramstart;   /* start of SRAM memory */
37         unsigned long   bi_sramsize;    /* size  of SRAM memory */
38 #if defined(CONFIG_5xx) || defined(CONFIG_8xx) || defined(CONFIG_8260) \
39         || defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
40         unsigned long   bi_immr_base;   /* base of IMMR register */
41 #endif
42 #if defined(CONFIG_MPC5xxx)
43         unsigned long   bi_mbar_base;   /* base of internal registers */
44 #endif
45 #if defined(CONFIG_MPC83xx)
46         unsigned long   bi_immrbar;
47 #endif
48         unsigned long   bi_bootflags;   /* boot / reboot flag (Unused) */
49         unsigned long   bi_ip_addr;     /* IP Address */
50         unsigned char   bi_enetaddr[6]; /* OLD: see README.enetaddr */
51         unsigned short  bi_ethspeed;    /* Ethernet speed in Mbps */
52         unsigned long   bi_intfreq;     /* Internal Freq, in MHz */
53         unsigned long   bi_busfreq;     /* Bus Freq, in MHz */
54 #if defined(CONFIG_CPM2)
55         unsigned long   bi_cpmfreq;     /* CPM_CLK Freq, in MHz */
56         unsigned long   bi_brgfreq;     /* BRG_CLK Freq, in MHz */
57         unsigned long   bi_sccfreq;     /* SCC_CLK Freq, in MHz */
58         unsigned long   bi_vco;         /* VCO Out from PLL, in MHz */
59 #endif
60 #if defined(CONFIG_MPC512X)
61         unsigned long   bi_ipsfreq;     /* IPS Bus Freq, in MHz */
62 #endif /* CONFIG_MPC512X */
63 #if defined(CONFIG_MPC5xxx)
64         unsigned long   bi_ipbfreq;     /* IPB Bus Freq, in MHz */
65         unsigned long   bi_pcifreq;     /* PCI Bus Freq, in MHz */
66 #endif
67         unsigned int    bi_baudrate;    /* Console Baudrate */
68 #if defined(CONFIG_405)   || \
69     defined(CONFIG_405GP) || \
70     defined(CONFIG_405CR) || \
71     defined(CONFIG_405EP) || \
72     defined(CONFIG_405EZ) || \
73     defined(CONFIG_405EX) || \
74     defined(CONFIG_440)
75         unsigned char   bi_s_version[4];        /* Version of this structure */
76         unsigned char   bi_r_version[32];       /* Version of the ROM (AMCC) */
77         unsigned int    bi_procfreq;    /* CPU (Internal) Freq, in Hz */
78         unsigned int    bi_plb_busfreq; /* PLB Bus speed, in Hz */
79         unsigned int    bi_pci_busfreq; /* PCI Bus speed, in Hz */
80         unsigned char   bi_pci_enetaddr[6];     /* PCI Ethernet MAC address */
81 #endif
82 #if defined(CONFIG_HYMOD)
83         hymod_conf_t    bi_hymod_conf;  /* hymod configuration information */
84 #endif
85
86 #ifdef CONFIG_HAS_ETH1
87         unsigned char   bi_enet1addr[6];        /* OLD: see README.enetaddr */
88 #endif
89 #ifdef CONFIG_HAS_ETH2
90         unsigned char   bi_enet2addr[6];        /* OLD: see README.enetaddr */
91 #endif
92 #ifdef CONFIG_HAS_ETH3
93         unsigned char   bi_enet3addr[6];        /* OLD: see README.enetaddr */
94 #endif
95 #ifdef CONFIG_HAS_ETH4
96         unsigned char   bi_enet4addr[6];        /* OLD: see README.enetaddr */
97 #endif
98 #ifdef CONFIG_HAS_ETH5
99         unsigned char   bi_enet5addr[6];        /* OLD: see README.enetaddr */
100 #endif
101
102 #if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \
103     defined(CONFIG_405EZ) || defined(CONFIG_440GX) || \
104     defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
105     defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
106     defined(CONFIG_460EX) || defined(CONFIG_460GT)
107         unsigned int    bi_opbfreq;             /* OPB clock in Hz */
108         int             bi_iic_fast[2];         /* Use fast i2c mode */
109 #endif
110 #if defined(CONFIG_NX823)
111         unsigned char   bi_sernum[8];
112 #endif
113 #if defined(CONFIG_4xx)
114 #if defined(CONFIG_440GX) || \
115     defined(CONFIG_460EX) || defined(CONFIG_460GT)
116         int             bi_phynum[4];           /* Determines phy mapping */
117         int             bi_phymode[4];          /* Determines phy mode */
118 #elif defined(CONFIG_405EP) || defined(CONFIG_405EX) || defined(CONFIG_440)
119         int             bi_phynum[2];           /* Determines phy mapping */
120         int             bi_phymode[2];          /* Determines phy mode */
121 #else
122         int             bi_phynum[1];           /* Determines phy mapping */
123         int             bi_phymode[1];          /* Determines phy mode */
124 #endif
125 #endif /* defined(CONFIG_4xx) */
126 } bd_t;
127
128 #endif /* __ASSEMBLY__ */
129
130 #endif /* !CONFIG_SYS_GENERIC_BOARD */
131
132 /* For image.h:image_check_target_arch() */
133 #define IH_ARCH_DEFAULT IH_ARCH_PPC
134
135 #endif  /* __U_BOOT_H__ */