]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - board/amcc/yucca/flash.c
Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx
[karo-tx-uboot.git] / board / amcc / yucca / flash.c
1 /*
2  * (C) Copyright 2006
3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4  *
5  * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
6  * Add support for Am29F016D and dynamic switch setting.
7  *
8  * See file CREDITS for list of people who contributed to this
9  * project.
10  *
11  * This program is free software; you can redistribute it and/or
12  * modify it under the terms of the GNU General Public License as
13  * published by the Free Software Foundation; either version 2 of
14  * the License, or (at your option) any later version.
15  *
16  * This program is distributed in the hope that it will be useful,
17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
19  * GNU General Public License for more details.
20  *
21  * You should have received a copy of the GNU General Public License
22  * along with this program; if not, write to the Free Software
23  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
24  * MA 02111-1307 USA
25  */
26
27 /*
28  * Modified 4/5/2001
29  * Wait for completion of each sector erase command issued
30  * 4/5/2001
31  * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
32  */
33
34 #include <common.h>
35 #include <asm/ppc4xx.h>
36 #include <asm/processor.h>
37 #include <asm/ppc440.h>
38 #include "yucca.h"
39
40 #ifdef DEBUG
41 #define DEBUGF(x...) printf(x)
42 #else
43 #define DEBUGF(x...)
44 #endif                          /* DEBUG */
45
46 flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];    /* info for FLASH chips */
47
48 /*
49  * Mark big flash bank (16 bit instead of 8 bit access) in address with bit 0
50  */
51 static unsigned long flash_addr_table[][CONFIG_SYS_MAX_FLASH_BANKS] = {
52         {0xfff00000, 0xfff80000, 0xe7c00001}, /* 0:boot from small flash */
53         {0x00000000, 0x00000000, 0x00000000}, /* 1:boot from pci 66      */
54         {0x00000000, 0x00000000, 0x00000000}, /* 2:boot from nand flash  */
55         {0xe7F00000, 0xe7F80000, 0xFFC00001}, /* 3:boot from big flash 33*/
56         {0xe7F00000, 0xe7F80000, 0xFFC00001}, /* 4:boot from big flash 66*/
57         {0x00000000, 0x00000000, 0x00000000}, /* 5:boot from             */
58         {0x00000000, 0x00000000, 0x00000000}, /* 6:boot from pci 66      */
59         {0x00000000, 0x00000000, 0x00000000}, /* 7:boot from             */
60         {0xfff00000, 0xfff80000, 0xe7c00001}, /* 8:boot from small flash */
61 };
62
63 /*
64  * include common flash code (for amcc boards)
65  */
66 /*-----------------------------------------------------------------------
67  * Functions
68  */
69 static int write_word(flash_info_t * info, ulong dest, ulong data);
70 #ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
71 static int write_word_1(flash_info_t * info, ulong dest, ulong data);
72 static int write_word_2(flash_info_t * info, ulong dest, ulong data);
73 static int flash_erase_1(flash_info_t * info, int s_first, int s_last);
74 static int flash_erase_2(flash_info_t * info, int s_first, int s_last);
75 static ulong flash_get_size_1(vu_long * addr, flash_info_t * info);
76 static ulong flash_get_size_2(vu_long * addr, flash_info_t * info);
77 #endif
78
79 void flash_print_info(flash_info_t * info)
80 {
81         int i;
82         int k;
83         int size;
84         int erased;
85         volatile unsigned long *flash;
86
87         if (info->flash_id == FLASH_UNKNOWN) {
88                 printf("missing or unknown FLASH type\n");
89                 return;
90         }
91
92         switch (info->flash_id & FLASH_VENDMASK) {
93                 case FLASH_MAN_AMD:
94                         printf("AMD ");
95                         break;
96                 case FLASH_MAN_STM:
97                         printf("STM ");
98                         break;
99                 case FLASH_MAN_FUJ:
100                         printf("FUJITSU ");
101                         break;
102                 case FLASH_MAN_SST:
103                         printf("SST ");
104                         break;
105                 case FLASH_MAN_MX:
106                         printf("MIXC ");
107                         break;
108                 default:
109                         printf("Unknown Vendor ");
110                         break;
111         }
112
113         switch (info->flash_id & FLASH_TYPEMASK) {
114                 case FLASH_AM040:
115                         printf("AM29F040 (512 Kbit, uniform sector size)\n");
116                         break;
117                 case FLASH_AM400B:
118                         printf("AM29LV400B (4 Mbit, bottom boot sect)\n");
119                         break;
120                 case FLASH_AM400T:
121                         printf("AM29LV400T (4 Mbit, top boot sector)\n");
122                         break;
123                 case FLASH_AM800B:
124                         printf("AM29LV800B (8 Mbit, bottom boot sect)\n");
125                         break;
126                 case FLASH_AM800T:
127                         printf("AM29LV800T (8 Mbit, top boot sector)\n");
128                         break;
129                 case FLASH_AMD016:
130                         printf("AM29F016D (16 Mbit, uniform sector size)\n");
131                         break;
132                 case FLASH_AM160B:
133                         printf("AM29LV160B (16 Mbit, bottom boot sect)\n");
134                         break;
135                 case FLASH_AM160T:
136                         printf("AM29LV160T (16 Mbit, top boot sector)\n");
137                         break;
138                 case FLASH_AM320B:
139                         printf("AM29LV320B (32 Mbit, bottom boot sect)\n");
140                         break;
141                 case FLASH_AM320T:
142                         printf("AM29LV320T (32 Mbit, top boot sector)\n");
143                         break;
144                 case FLASH_AM033C:
145                         printf("AM29LV033C (32 Mbit, top boot sector)\n");
146                         break;
147                 case FLASH_SST800A:
148                         printf("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
149                         break;
150                 case FLASH_SST160A:
151                         printf("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
152                         break;
153                 case FLASH_STMW320DT:
154                         printf ("M29W320DT (32 M, top sector)\n");
155                         break;
156                 case FLASH_MXLV320T:
157                         printf ("MXLV320T (32 Mbit, top sector)\n");
158                         break;
159                 default:
160                         printf("Unknown Chip Type\n");
161                         break;
162         }
163
164         printf("  Size: %ld KB in %d Sectors\n",
165                         info->size >> 10, info->sector_count);
166
167         printf("  Sector Start Addresses:");
168         for (i = 0; i < info->sector_count; ++i) {
169                 /*
170                  * Check if whole sector is erased
171                  */
172                 if (i != (info->sector_count - 1))
173                         size = info->start[i + 1] - info->start[i];
174                 else
175                         size = info->start[0] + info->size - info->start[i];
176                 erased = 1;
177                 flash = (volatile unsigned long *)info->start[i];
178                 size = size >> 2;       /* divide by 4 for longword access */
179                 for (k = 0; k < size; k++) {
180                         if (*flash++ != 0xffffffff) {
181                                 erased = 0;
182                                 break;
183                         }
184                 }
185
186                 if ((i % 5) == 0)
187                         printf("\n   ");
188                 printf(" %08lX%s%s",
189                                 info->start[i],
190                                 erased ? " E" : "  ",
191                                 info->protect[i] ? "RO " : "   ");
192         }
193         printf("\n");
194         return;
195 }
196
197
198 /*
199  * The following code cannot be run from FLASH!
200  */
201 #ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
202 static ulong flash_get_size(vu_long * addr, flash_info_t * info)
203 {
204         /* bit 0 used for big flash marking */
205         if ((ulong)addr & 0x1)
206                 return flash_get_size_2((vu_long *)((ulong)addr & 0xfffffffe), info);
207         else
208                 return flash_get_size_1(addr, info);
209 }
210
211 static ulong flash_get_size_1(vu_long * addr, flash_info_t * info)
212 #else
213 static ulong flash_get_size(vu_long * addr, flash_info_t * info)
214 #endif
215 {
216         short i;
217         CONFIG_SYS_FLASH_WORD_SIZE value;
218         ulong base = (ulong) addr;
219         volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) addr;
220
221         DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
222
223         /* Write auto select command: read Manufacturer ID */
224         addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
225         addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
226         addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00900090;
227         udelay(1000);
228
229         value = addr2[0];
230         DEBUGF("FLASH MANUFACT: %x\n", value);
231
232         switch (value) {
233                 case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_MANUFACT:
234                         info->flash_id = FLASH_MAN_AMD;
235                         break;
236                 case (CONFIG_SYS_FLASH_WORD_SIZE) FUJ_MANUFACT:
237                         info->flash_id = FLASH_MAN_FUJ;
238                         break;
239                 case (CONFIG_SYS_FLASH_WORD_SIZE) SST_MANUFACT:
240                         info->flash_id = FLASH_MAN_SST;
241                         break;
242                 case (CONFIG_SYS_FLASH_WORD_SIZE) STM_MANUFACT:
243                         info->flash_id = FLASH_MAN_STM;
244                         break;
245                 default:
246                         info->flash_id = FLASH_UNKNOWN;
247                         info->sector_count = 0;
248                         info->size = 0;
249                         return (0);     /* no or unknown flash  */
250         }
251
252         value = addr2[1];       /* device ID            */
253         DEBUGF("\nFLASH DEVICEID: %x\n", value);
254
255         switch (value) {
256                 case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV040B:
257                         info->flash_id += FLASH_AM040;
258                         info->sector_count = 8;
259                         info->size = 0x0080000; /* => 512 ko */
260                         break;
261
262                 case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_F040B:
263                         info->flash_id += FLASH_AM040;
264                         info->sector_count = 8;
265                         info->size = 0x0080000; /* => 512 ko */
266                         break;
267
268                 case (CONFIG_SYS_FLASH_WORD_SIZE) STM_ID_M29W040B:
269                         info->flash_id += FLASH_AM040;
270                         info->sector_count = 8;
271                         info->size = 0x0080000; /* => 512 ko */
272                         break;
273
274                 case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_F016D:
275                         info->flash_id += FLASH_AMD016;
276                         info->sector_count = 32;
277                         info->size = 0x00200000;
278                         break;          /* => 2 MB              */
279
280                 case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV033C:
281                         info->flash_id += FLASH_AMDLV033C;
282                         info->sector_count = 64;
283                         info->size = 0x00400000;
284                         break;          /* => 4 MB              */
285
286                 case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV400T:
287                         info->flash_id += FLASH_AM400T;
288                         info->sector_count = 11;
289                         info->size = 0x00080000;
290                         break;          /* => 0.5 MB            */
291
292                 case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV400B:
293                         info->flash_id += FLASH_AM400B;
294                         info->sector_count = 11;
295                         info->size = 0x00080000;
296                         break;          /* => 0.5 MB            */
297
298                 case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV800T:
299                         info->flash_id += FLASH_AM800T;
300                         info->sector_count = 19;
301                         info->size = 0x00100000;
302                         break;          /* => 1 MB              */
303
304                 case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV800B:
305                         info->flash_id += FLASH_AM800B;
306                         info->sector_count = 19;
307                         info->size = 0x00100000;
308                         break;          /* => 1 MB              */
309
310                 case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV160T:
311                         info->flash_id += FLASH_AM160T;
312                         info->sector_count = 35;
313                         info->size = 0x00200000;
314                         break;          /* => 2 MB              */
315
316                 case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV160B:
317                         info->flash_id += FLASH_AM160B;
318                         info->sector_count = 35;
319                         info->size = 0x00200000;
320                         break;          /* => 2 MB              */
321
322                 default:
323                         info->flash_id = FLASH_UNKNOWN;
324                         return (0);     /* => no or unknown flash */
325         }
326
327         /* set up sector start address table */
328         if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
329                         ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) ||
330                         ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMD016)) {
331                 for (i = 0; i < info->sector_count; i++)
332                         info->start[i] = base + (i * 0x00010000);
333         } else {
334                 if (info->flash_id & FLASH_BTYPE) {
335                         /* set sector offsets for bottom boot block type        */
336                         info->start[0] = base + 0x00000000;
337                         info->start[1] = base + 0x00004000;
338                         info->start[2] = base + 0x00006000;
339                         info->start[3] = base + 0x00008000;
340                         for (i = 4; i < info->sector_count; i++) {
341                                 info->start[i] =
342                                         base + (i * 0x00010000) - 0x00030000;
343                         }
344                 } else {
345                         /* set sector offsets for top boot block type           */
346                         i = info->sector_count - 1;
347                         info->start[i--] = base + info->size - 0x00004000;
348                         info->start[i--] = base + info->size - 0x00006000;
349                         info->start[i--] = base + info->size - 0x00008000;
350                         for (; i >= 0; i--) {
351                                 info->start[i] = base + i * 0x00010000;
352                         }
353                 }
354         }
355
356         /* check for protected sectors */
357         for (i = 0; i < info->sector_count; i++) {
358                 /* read sector protection at sector address, (A7 .. A0) = 0x02 */
359                 /* D0 = 1 if protected */
360                 addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]);
361
362                 /* For AMD29033C flash we need to resend the command of *
363                  * reading flash protection for upper 8 Mb of flash     */
364                 if (i == 32) {
365                         addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA;
366                         addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555;
367                         addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x90909090;
368                 }
369
370                 if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
371                         info->protect[i] = 0;
372                 else
373                         info->protect[i] = addr2[2] & 1;
374         }
375
376         /* issue bank reset to return to read mode */
377         addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0;
378
379         return (info->size);
380 }
381
382 static int wait_for_DQ7_1(flash_info_t * info, int sect)
383 {
384         ulong start, now, last;
385         volatile CONFIG_SYS_FLASH_WORD_SIZE *addr =
386                 (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
387
388         start = get_timer(0);
389         last = start;
390         while ((addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
391                         (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) {
392                 if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
393                         printf("Timeout\n");
394                         return -1;
395                 }
396                 /* show that we're waiting */
397                 if ((now - last) > 1000) {      /* every second */
398                         putc('.');
399                         last = now;
400                 }
401         }
402         return 0;
403 }
404
405 #ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
406 int flash_erase(flash_info_t * info, int s_first, int s_last)
407 {
408         if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
409                         ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ||
410                         ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) ||
411                         ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T)) {
412                 return flash_erase_2(info, s_first, s_last);
413         } else {
414                 return flash_erase_1(info, s_first, s_last);
415         }
416 }
417
418 static int flash_erase_1(flash_info_t * info, int s_first, int s_last)
419 #else
420 int flash_erase(flash_info_t * info, int s_first, int s_last)
421 #endif
422 {
423         volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
424         volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
425         int flag, prot, sect;
426         int i;
427
428         if ((s_first < 0) || (s_first > s_last)) {
429                 if (info->flash_id == FLASH_UNKNOWN)
430                         printf("- missing\n");
431                 else
432                         printf("- no sectors to erase\n");
433                 return 1;
434         }
435
436         if (info->flash_id == FLASH_UNKNOWN) {
437                 printf("Can't erase unknown flash type - aborted\n");
438                 return 1;
439         }
440
441         prot = 0;
442         for (sect = s_first; sect <= s_last; ++sect) {
443                 if (info->protect[sect])
444                         prot++;
445         }
446
447         if (prot)
448                 printf("- Warning: %d protected sectors will not be erased!", prot);
449
450         printf("\n");
451
452         /* Disable interrupts which might cause a timeout here */
453         flag = disable_interrupts();
454
455         /* Start erase on unprotected sectors */
456         for (sect = s_first; sect <= s_last; sect++) {
457                 if (info->protect[sect] == 0) { /* not protected */
458                         addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
459
460                         if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
461                                 addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
462                                 addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
463                                 addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080;
464                                 addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
465                                 addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
466                                 addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00500050;     /* block erase */
467                                 for (i = 0; i < 50; i++)
468                                         udelay(1000);   /* wait 1 ms */
469                         } else {
470                                 addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
471                                 addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
472                                 addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080;
473                                 addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
474                                 addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
475                                 addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00300030;     /* sector erase */
476                         }
477                         /*
478                          * Wait for each sector to complete, it's more
479                          * reliable.  According to AMD Spec, you must
480                          * issue all erase commands within a specified
481                          * timeout.  This has been seen to fail, especially
482                          * if printf()s are included (for debug)!!
483                          */
484                         wait_for_DQ7_1(info, sect);
485                 }
486         }
487
488         /* re-enable interrupts if necessary */
489         if (flag)
490                 enable_interrupts();
491
492         /* wait at least 80us - let's wait 1 ms */
493         udelay(1000);
494
495         /* reset to read mode */
496         addr = (CONFIG_SYS_FLASH_WORD_SIZE *) info->start[0];
497         addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0;      /* reset bank */
498
499         printf(" done\n");
500         return 0;
501 }
502
503 /*-----------------------------------------------------------------------
504  * Copy memory to flash, returns:
505  * 0 - OK
506  * 1 - write timeout
507  * 2 - Flash not erased
508  */
509 int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
510 {
511         ulong cp, wp, data;
512         int i, l, rc;
513
514         wp = (addr & ~3);       /* get lower word aligned address */
515
516         /*
517          * handle unaligned start bytes
518          */
519         if ((l = addr - wp) != 0) {
520                 data = 0;
521                 for (i = 0, cp = wp; i < l; ++i, ++cp)
522                         data = (data << 8) | (*(uchar *) cp);
523
524                 for (; i < 4 && cnt > 0; ++i) {
525                         data = (data << 8) | *src++;
526                         --cnt;
527                         ++cp;
528                 }
529
530                 for (; cnt == 0 && i < 4; ++i, ++cp)
531                         data = (data << 8) | (*(uchar *) cp);
532
533                 if ((rc = write_word(info, wp, data)) != 0)
534                         return (rc);
535
536                 wp += 4;
537         }
538
539         /*
540          * handle word aligned part
541          */
542         while (cnt >= 4) {
543                 data = 0;
544                 for (i = 0; i < 4; ++i)
545                         data = (data << 8) | *src++;
546
547                 if ((rc = write_word(info, wp, data)) != 0)
548                         return (rc);
549
550                 wp += 4;
551                 cnt -= 4;
552         }
553
554         if (cnt == 0)
555                 return (0);
556
557         /*
558          * handle unaligned tail bytes
559          */
560         data = 0;
561         for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
562                 data = (data << 8) | *src++;
563                 --cnt;
564         }
565         for (; i < 4; ++i, ++cp)
566                 data = (data << 8) | (*(uchar *) cp);
567
568         return (write_word(info, wp, data));
569 }
570
571 /*-----------------------------------------------------------------------
572  * Copy memory to flash, returns:
573  * 0 - OK
574  * 1 - write timeout
575  * 2 - Flash not erased
576  */
577 #ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
578 static int write_word(flash_info_t * info, ulong dest, ulong data)
579 {
580         if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
581                         ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ||
582                         ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) ||
583                         ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T)) {
584                 return write_word_2(info, dest, data);
585         } else {
586                 return write_word_1(info, dest, data);
587         }
588 }
589
590 static int write_word_1(flash_info_t * info, ulong dest, ulong data)
591 #else
592 static int write_word(flash_info_t * info, ulong dest, ulong data)
593 #endif
594 {
595         volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
596         volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *) dest;
597         volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = (CONFIG_SYS_FLASH_WORD_SIZE *) & data;
598         ulong start;
599         int i, flag;
600
601         /* Check if Flash is (sufficiently) erased */
602         if ((*((vu_long *)dest) & data) != data)
603                 return (2);
604
605         for (i = 0; i < 4 / sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++) {
606                 /* Disable interrupts which might cause a timeout here */
607                 flag = disable_interrupts();
608
609                 addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
610                 addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
611                 addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00A000A0;
612
613                 dest2[i] = data2[i];
614
615                 /* re-enable interrupts if necessary */
616                 if (flag)
617                         enable_interrupts();
618
619                 /* data polling for D7 */
620                 start = get_timer(0);
621                 while ((dest2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
622                                 (data2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080)) {
623
624                         if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT)
625                                 return (1);
626                 }
627         }
628
629         return (0);
630 }
631
632 #ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
633
634 #undef  CONFIG_SYS_FLASH_WORD_SIZE
635 #define CONFIG_SYS_FLASH_WORD_SIZE unsigned short
636
637 /*
638  * The following code cannot be run from FLASH!
639  */
640 static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
641 {
642         short i;
643         int n;
644         CONFIG_SYS_FLASH_WORD_SIZE value;
645         ulong base = (ulong) addr;
646         volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) addr;
647
648         DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
649
650         /* issue bank reset to return to read mode */
651         addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0;
652         /* Write auto select command: read Manufacturer ID */
653         addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
654         addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
655         addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00900090;
656         udelay(1000);
657
658         value = addr2[0];
659         DEBUGF("FLASH MANUFACT: %x\n", value);
660
661         switch (value) {
662                 case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_MANUFACT:
663                         info->flash_id = FLASH_MAN_AMD;
664                         break;
665                 case (CONFIG_SYS_FLASH_WORD_SIZE) FUJ_MANUFACT:
666                         info->flash_id = FLASH_MAN_FUJ;
667                         break;
668                 case (CONFIG_SYS_FLASH_WORD_SIZE) SST_MANUFACT:
669                         info->flash_id = FLASH_MAN_SST;
670                         break;
671                 case (CONFIG_SYS_FLASH_WORD_SIZE) STM_MANUFACT:
672                         info->flash_id = FLASH_MAN_STM;
673                         break;
674                 case (CONFIG_SYS_FLASH_WORD_SIZE) MX_MANUFACT:
675                         info->flash_id = FLASH_MAN_MX;
676                         break;
677                 default:
678                         info->flash_id = FLASH_UNKNOWN;
679                         info->sector_count = 0;
680                         info->size = 0;
681                         return (0);     /* no or unknown flash  */
682         }
683
684         value = addr2[1];       /* device ID            */
685         DEBUGF("\nFLASH DEVICEID: %x\n", value);
686
687         switch (value) {
688                 case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV320T:
689                         info->flash_id += FLASH_AM320T;
690                         info->sector_count = 71;
691                         info->size = 0x00400000;
692                         break;  /* => 4 MB      */
693                 case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV320B:
694                         info->flash_id += FLASH_AM320B;
695                         info->sector_count = 71;
696                         info->size = 0x00400000;
697                         break;  /* => 4 MB      */
698                 case (CONFIG_SYS_FLASH_WORD_SIZE)STM_ID_29W320DT:
699                         info->flash_id += FLASH_STMW320DT;
700                         info->sector_count = 67;
701                         info->size = 0x00400000;
702                         break;  /* => 4 MB      */
703                 case (CONFIG_SYS_FLASH_WORD_SIZE)MX_ID_LV320T:
704                         info->flash_id += FLASH_MXLV320T;
705                         info->sector_count = 71;
706                         info->size = 0x00400000;
707                         break;  /* => 4 MB      */
708                 default:
709                         info->flash_id = FLASH_UNKNOWN;
710                         return (0);     /* => no or unknown flash */
711         }
712
713         /* set up sector start address table */
714         if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
715                         ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) ||
716                         ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMD016)) {
717                 for (i = 0; i < info->sector_count; i++)
718                         info->start[i] = base + (i * 0x00010000);
719         } else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) {
720                 /* set sector offsets for top boot block type           */
721                 base += info->size;
722                 i = info->sector_count;
723                 /*  1 x 16k boot sector */
724                 base -= 16 << 10;
725                 --i;
726                 info->start[i] = base;
727                 /*  2 x 8k  boot sectors */
728                 for (n = 0; n < 2; ++n) {
729                         base -= 8 << 10;
730                         --i;
731                         info->start[i] = base;
732                 }
733                 /*  1 x 32k boot sector */
734                 base -= 32 << 10;
735                 --i;
736                 info->start[i] = base;
737
738                 while (i > 0) {                 /* 64k regular sectors  */
739                         base -= 64 << 10;
740                         --i;
741                         info->start[i] = base;
742                 }
743         } else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T) {
744                 i = info->sector_count - 1;
745                 info->start[i--] = base + info->size - 0x00002000;
746                 info->start[i--] = base + info->size - 0x00004000;
747                 info->start[i--] = base + info->size - 0x00006000;
748                 info->start[i--] = base + info->size - 0x00008000;
749                 info->start[i--] = base + info->size - 0x0000a000;
750                 info->start[i--] = base + info->size - 0x0000c000;
751                 info->start[i--] = base + info->size - 0x0000e000;
752                 info->start[i--] = base + info->size - 0x00010000;
753
754                 for (; i >= 0; i--)
755                         info->start[i] = base + i * 0x00010000;
756         } else {
757                 if (info->flash_id & FLASH_BTYPE) {
758                         /* set sector offsets for bottom boot block type        */
759                         info->start[0] = base + 0x00000000;
760                         info->start[1] = base + 0x00004000;
761                         info->start[2] = base + 0x00006000;
762                         info->start[3] = base + 0x00008000;
763
764                         for (i = 4; i < info->sector_count; i++)
765                                 info->start[i] = base + (i * 0x00010000) - 0x00030000;
766                 } else {
767                         /* set sector offsets for top boot block type           */
768                         i = info->sector_count - 1;
769                         info->start[i--] = base + info->size - 0x00004000;
770                         info->start[i--] = base + info->size - 0x00006000;
771                         info->start[i--] = base + info->size - 0x00008000;
772
773                         for (; i >= 0; i--)
774                                 info->start[i] = base + i * 0x00010000;
775                 }
776         }
777
778         /* check for protected sectors */
779         for (i = 0; i < info->sector_count; i++) {
780                 /* read sector protection at sector address, (A7 .. A0) = 0x02 */
781                 /* D0 = 1 if protected */
782                 addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]);
783
784                 /* For AMD29033C flash we need to resend the command of *
785                  * reading flash protection for upper 8 Mb of flash     */
786                 if (i == 32) {
787                         addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA;
788                         addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555;
789                         addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x90909090;
790                 }
791
792                 if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
793                         info->protect[i] = 0;
794                 else
795                         info->protect[i] = addr2[2] & 1;
796         }
797
798         /* issue bank reset to return to read mode */
799         addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0;
800
801         return (info->size);
802 }
803
804 static int wait_for_DQ7_2(flash_info_t * info, int sect)
805 {
806         ulong start, now, last;
807         volatile CONFIG_SYS_FLASH_WORD_SIZE *addr =
808                 (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
809
810         start = get_timer(0);
811         last = start;
812         while ((addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
813                         (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) {
814                 if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
815                         printf("Timeout\n");
816                         return -1;
817                 }
818                 /* show that we're waiting */
819                 if ((now - last) > 1000) {      /* every second */
820                         putc('.');
821                         last = now;
822                 }
823         }
824         return 0;
825 }
826
827 static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
828 {
829         volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
830         volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
831         int flag, prot, sect;
832         int i;
833
834         if ((s_first < 0) || (s_first > s_last)) {
835                 if (info->flash_id == FLASH_UNKNOWN)
836                         printf("- missing\n");
837                 else
838                         printf("- no sectors to erase\n");
839                 return 1;
840         }
841
842         if (info->flash_id == FLASH_UNKNOWN) {
843                 printf("Can't erase unknown flash type - aborted\n");
844                 return 1;
845         }
846
847         prot = 0;
848         for (sect = s_first; sect <= s_last; ++sect) {
849                 if (info->protect[sect])
850                         prot++;
851         }
852
853         if (prot)
854                 printf("- Warning: %d protected sectors will not be erased!",   prot);
855
856         printf("\n");
857
858         /* Disable interrupts which might cause a timeout here */
859         flag = disable_interrupts();
860
861         /* Start erase on unprotected sectors */
862         for (sect = s_first; sect <= s_last; sect++) {
863                 if (info->protect[sect] == 0) { /* not protected */
864                         addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
865
866                         if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
867                                 addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
868                                 addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
869                                 addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080;
870                                 addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
871                                 addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
872                                 addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00500050;     /* block erase */
873                                 for (i = 0; i < 50; i++)
874                                         udelay(1000);   /* wait 1 ms */
875                         } else {
876                                 addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
877                                 addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
878                                 addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080;
879                                 addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
880                                 addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
881                                 addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00300030;     /* sector erase */
882                         }
883                         /*
884                          * Wait for each sector to complete, it's more
885                          * reliable.  According to AMD Spec, you must
886                          * issue all erase commands within a specified
887                          * timeout.  This has been seen to fail, especially
888                          * if printf()s are included (for debug)!!
889                          */
890                         wait_for_DQ7_2(info, sect);
891                 }
892         }
893
894         /* re-enable interrupts if necessary */
895         if (flag)
896                 enable_interrupts();
897
898         /* wait at least 80us - let's wait 1 ms */
899         udelay(1000);
900
901         /* reset to read mode */
902         addr = (CONFIG_SYS_FLASH_WORD_SIZE *) info->start[0];
903         addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0;      /* reset bank */
904
905         printf(" done\n");
906         return 0;
907 }
908
909 static int write_word_2(flash_info_t * info, ulong dest, ulong data)
910 {
911         ulong *data_ptr = &data;
912         volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[0]);
913         volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *)dest;
914         volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = (CONFIG_SYS_FLASH_WORD_SIZE *)data_ptr;
915         ulong start;
916         int i;
917
918         /* Check if Flash is (sufficiently) erased */
919         if ((*((vu_long *)dest) & data) != data)
920                 return (2);
921
922         for (i = 0; i < 4 / sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++) {
923                 int flag;
924
925                 /* Disable interrupts which might cause a timeout here */
926                 flag = disable_interrupts();
927
928                 addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
929                 addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
930                 addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00A000A0;
931
932                 dest2[i] = data2[i];
933
934                 /* re-enable interrupts if necessary */
935                 if (flag)
936                         enable_interrupts();
937
938                 /* data polling for D7 */
939                 start = get_timer(0);
940                 while ((dest2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
941                                 (data2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080)) {
942
943                         if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT)
944                                 return (1);
945                 }
946         }
947
948         return (0);
949 }
950 #endif /* CONFIG_SYS_FLASH_2ND_16BIT_DEV */
951
952 /*-----------------------------------------------------------------------
953  * Functions
954  */
955 static ulong flash_get_size(vu_long * addr, flash_info_t * info);
956 static int write_word(flash_info_t * info, ulong dest, ulong data);
957
958 /*-----------------------------------------------------------------------
959  */
960
961 unsigned long flash_init(void)
962 {
963         unsigned long total_b = 0;
964         unsigned long size_b[CONFIG_SYS_MAX_FLASH_BANKS];
965         unsigned short index = 0;
966         int i;
967         unsigned long val;
968         unsigned long ebc_boot_size;
969         unsigned long boot_selection;
970
971         mfsdr(sdr_pstrp0, val);
972         index = (val & SDR0_PSTRP0_BOOTSTRAP_MASK) >> 28;
973
974         if ((index == 0xc) || (index == 8)) {
975                 /*
976                  * Boot Settings in IIC EEprom address 0xA8 or 0xA0
977                  * Read Serial Device Strap Register1 in PPC440SPe
978                  */
979                 mfsdr(SDR0_SDSTP1, val);
980                 boot_selection  = val & SDR0_SDSTP1_BOOT_SEL_MASK;
981                 ebc_boot_size   = val & SDR0_SDSTP1_EBC_ROM_BS_MASK;
982
983                 switch(boot_selection) {
984                         case SDR0_SDSTP1_BOOT_SEL_EBC:
985                                 switch(ebc_boot_size) {
986                                         case SDR0_SDSTP1_EBC_ROM_BS_16BIT:
987                                                 index = 3;
988                                                 break;
989                                         case SDR0_SDSTP1_EBC_ROM_BS_8BIT:
990                                                 index = 0;
991                                                 break;
992                                 }
993                                 break;
994
995                         case SDR0_SDSTP1_BOOT_SEL_PCI:
996                                 index = 1;
997                                 break;
998
999                 }
1000         } /*else if (index == 0) {*/
1001 /*              if (in8(FPGA_SETTING_REG) & FPGA_SET_REG_OP_CODE_FLASH_ABOVE)*/
1002 /*                      index = 8;*/ /* sram below op code flash -> new index 8*/
1003 /*      }*/
1004
1005         DEBUGF("\n");
1006         DEBUGF("FLASH: Index: %d\n", index);
1007
1008         /* Init: no FLASHes known */
1009         for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
1010                 flash_info[i].flash_id = FLASH_UNKNOWN;
1011                 flash_info[i].sector_count = -1;
1012                 flash_info[i].size = 0;
1013
1014                 /* check whether the address is 0 */
1015                 if (flash_addr_table[index][i] == 0)
1016                         continue;
1017
1018                 /* call flash_get_size() to initialize sector address */
1019                 size_b[i] = flash_get_size((vu_long *) flash_addr_table[index][i],
1020                                 &flash_info[i]);
1021
1022                 flash_info[i].size = size_b[i];
1023
1024                 if (flash_info[i].flash_id == FLASH_UNKNOWN) {
1025                         printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
1026                                         i, size_b[i], size_b[i] << 20);
1027                         flash_info[i].sector_count = -1;
1028                         flash_info[i].size = 0;
1029                 }
1030
1031                 /* Monitor protection ON by default */
1032                 (void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE,
1033                                     CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
1034                                     &flash_info[i]);
1035 #if defined(CONFIG_ENV_IS_IN_FLASH)
1036                 (void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR,
1037                                     CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
1038                                     &flash_info[i]);
1039 #if defined(CONFIG_ENV_ADDR_REDUND)
1040                 (void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND,
1041                                     CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
1042                                     &flash_info[i]);
1043 #endif
1044 #endif
1045                 total_b += flash_info[i].size;
1046         }
1047
1048         return total_b;
1049 }