board/boundary/nitrogen6x/nitrogen6x.c

   1 /*
   2  * Copyright (C) 2010-2013 Freescale Semiconductor, Inc.
   3  * Copyright (C) 2013, Boundary Devices <info@boundarydevices.com>
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 #include <common.h>
  25 #include <asm/io.h>
  26 #include <asm/arch/clock.h>
  27 #include <asm/arch/imx-regs.h>
  28 #include <asm/arch/iomux.h>
  29 #include <asm/arch/sys_proto.h>
  30 #include <malloc.h>
  31 #include <asm/arch/mx6-pins.h>
  32 #include <asm/errno.h>
  33 #include <asm/gpio.h>
  34 #include <asm/imx-common/iomux-v3.h>
  35 #include <asm/imx-common/mxc_i2c.h>
  36 #include <asm/imx-common/boot_mode.h>
  37 #include <mmc.h>
  38 #include <fsl_esdhc.h>
  39 #include <micrel.h>
  40 #include <miiphy.h>
  41 #include <netdev.h>
  42 #include <linux/fb.h>
  43 #include <ipu_pixfmt.h>
  44 #include <asm/arch/crm_regs.h>
  45 #include <asm/arch/mxc_hdmi.h>
  46 #include <i2c.h>
  47
  48 DECLARE_GLOBAL_DATA_PTR;
  49
  50 #define UART_PAD_CTRL  (PAD_CTL_PUS_100K_UP |                   \
  51         PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm |                 \
  52         PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
  53
  54 #define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP |                    \
  55         PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm |                 \
  56         PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
  57
  58 #define ENET_PAD_CTRL  (PAD_CTL_PUS_100K_UP |                   \
  59         PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
  60
  61 #define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED |         \
  62         PAD_CTL_DSE_40ohm     | PAD_CTL_SRE_FAST)
  63
  64 #define BUTTON_PAD_CTRL (PAD_CTL_PUS_100K_UP |                  \
  65         PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
  66
  67 #define I2C_PAD_CTRL    (PAD_CTL_PUS_100K_UP |                  \
  68         PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS |   \
  69         PAD_CTL_ODE | PAD_CTL_SRE_FAST)
  70
  71 #define WEAK_PULLUP     (PAD_CTL_PUS_100K_UP |                  \
  72         PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS |   \
  73         PAD_CTL_SRE_SLOW)
  74
  75 #define WEAK_PULLDOWN   (PAD_CTL_PUS_100K_DOWN |                \
  76         PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm |                 \
  77         PAD_CTL_HYS | PAD_CTL_SRE_SLOW)
  78
  79 #define OUTPUT_40OHM (PAD_CTL_SPEED_MED|PAD_CTL_DSE_40ohm)
  80
  81 int dram_init(void)
  82 {
  83         gd->ram_size = ((ulong)CONFIG_DDR_MB * 1024 * 1024);
  84
  85         return 0;
  86 }
  87
  88 iomux_v3_cfg_t const uart1_pads[] = {
  89         MX6_PAD_SD3_DAT6__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
  90         MX6_PAD_SD3_DAT7__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
  91 };
  92
  93 iomux_v3_cfg_t const uart2_pads[] = {
  94         MX6_PAD_EIM_D26__UART2_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
  95         MX6_PAD_EIM_D27__UART2_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
  96 };
  97
  98 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
  99
 100 /* I2C1, SGTL5000 */
 101 struct i2c_pads_info i2c_pad_info0 = {
 102         .scl = {
 103                 .i2c_mode = MX6_PAD_EIM_D21__I2C1_SCL | PC,
 104                 .gpio_mode = MX6_PAD_EIM_D21__GPIO_3_21 | PC,
 105                 .gp = IMX_GPIO_NR(3, 21)
 106         },
 107         .sda = {
 108                 .i2c_mode = MX6_PAD_EIM_D28__I2C1_SDA | PC,
 109                 .gpio_mode = MX6_PAD_EIM_D28__GPIO_3_28 | PC,
 110                 .gp = IMX_GPIO_NR(3, 28)
 111         }
 112 };
 113
 114 /* I2C2 Camera, MIPI */
 115 struct i2c_pads_info i2c_pad_info1 = {
 116         .scl = {
 117                 .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | PC,
 118                 .gpio_mode = MX6_PAD_KEY_COL3__GPIO_4_12 | PC,
 119                 .gp = IMX_GPIO_NR(4, 12)
 120         },
 121         .sda = {
 122                 .i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | PC,
 123                 .gpio_mode = MX6_PAD_KEY_ROW3__GPIO_4_13 | PC,
 124                 .gp = IMX_GPIO_NR(4, 13)
 125         }
 126 };
 127
 128 /* I2C3, J15 - RGB connector */
 129 struct i2c_pads_info i2c_pad_info2 = {
 130         .scl = {
 131                 .i2c_mode = MX6_PAD_GPIO_5__I2C3_SCL | PC,
 132                 .gpio_mode = MX6_PAD_GPIO_5__GPIO_1_5 | PC,
 133                 .gp = IMX_GPIO_NR(1, 5)
 134         },
 135         .sda = {
 136                 .i2c_mode = MX6_PAD_GPIO_16__I2C3_SDA | PC,
 137                 .gpio_mode = MX6_PAD_GPIO_16__GPIO_7_11 | PC,
 138                 .gp = IMX_GPIO_NR(7, 11)
 139         }
 140 };
 141
 142 iomux_v3_cfg_t const usdhc3_pads[] = {
 143         MX6_PAD_SD3_CLK__USDHC3_CLK   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 144         MX6_PAD_SD3_CMD__USDHC3_CMD   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 145         MX6_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 146         MX6_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 147         MX6_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 148         MX6_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 149         MX6_PAD_SD3_DAT5__GPIO_7_0    | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
 150 };
 151
 152 iomux_v3_cfg_t const usdhc4_pads[] = {
 153         MX6_PAD_SD4_CLK__USDHC4_CLK   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 154         MX6_PAD_SD4_CMD__USDHC4_CMD   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 155         MX6_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 156         MX6_PAD_SD4_DAT1__USDHC4_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 157         MX6_PAD_SD4_DAT2__USDHC4_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 158         MX6_PAD_SD4_DAT3__USDHC4_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 159         MX6_PAD_NANDF_D6__GPIO_2_6    | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
 160 };
 161
 162 iomux_v3_cfg_t const enet_pads1[] = {
 163         MX6_PAD_ENET_MDIO__ENET_MDIO            | MUX_PAD_CTRL(ENET_PAD_CTRL),
 164         MX6_PAD_ENET_MDC__ENET_MDC              | MUX_PAD_CTRL(ENET_PAD_CTRL),
 165         MX6_PAD_RGMII_TXC__ENET_RGMII_TXC       | MUX_PAD_CTRL(ENET_PAD_CTRL),
 166         MX6_PAD_RGMII_TD0__ENET_RGMII_TD0       | MUX_PAD_CTRL(ENET_PAD_CTRL),
 167         MX6_PAD_RGMII_TD1__ENET_RGMII_TD1       | MUX_PAD_CTRL(ENET_PAD_CTRL),
 168         MX6_PAD_RGMII_TD2__ENET_RGMII_TD2       | MUX_PAD_CTRL(ENET_PAD_CTRL),
 169         MX6_PAD_RGMII_TD3__ENET_RGMII_TD3       | MUX_PAD_CTRL(ENET_PAD_CTRL),
 170         MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL      | MUX_PAD_CTRL(ENET_PAD_CTRL),
 171         MX6_PAD_ENET_REF_CLK__ENET_TX_CLK       | MUX_PAD_CTRL(ENET_PAD_CTRL),
 172         /* pin 35 - 1 (PHY_AD2) on reset */
 173         MX6_PAD_RGMII_RXC__GPIO_6_30            | MUX_PAD_CTRL(NO_PAD_CTRL),
 174         /* pin 32 - 1 - (MODE0) all */
 175         MX6_PAD_RGMII_RD0__GPIO_6_25            | MUX_PAD_CTRL(NO_PAD_CTRL),
 176         /* pin 31 - 1 - (MODE1) all */
 177         MX6_PAD_RGMII_RD1__GPIO_6_27            | MUX_PAD_CTRL(NO_PAD_CTRL),
 178         /* pin 28 - 1 - (MODE2) all */
 179         MX6_PAD_RGMII_RD2__GPIO_6_28            | MUX_PAD_CTRL(NO_PAD_CTRL),
 180         /* pin 27 - 1 - (MODE3) all */
 181         MX6_PAD_RGMII_RD3__GPIO_6_29            | MUX_PAD_CTRL(NO_PAD_CTRL),
 182         /* pin 33 - 1 - (CLK125_EN) 125Mhz clockout enabled */
 183         MX6_PAD_RGMII_RX_CTL__GPIO_6_24 | MUX_PAD_CTRL(NO_PAD_CTRL),
 184         /* pin 42 PHY nRST */
 185         MX6_PAD_EIM_D23__GPIO_3_23              | MUX_PAD_CTRL(NO_PAD_CTRL),
 186         MX6_PAD_ENET_RXD0__GPIO_1_27            | MUX_PAD_CTRL(NO_PAD_CTRL),
 187 };
 188
 189 iomux_v3_cfg_t const enet_pads2[] = {
 190         MX6_PAD_RGMII_RXC__ENET_RGMII_RXC       | MUX_PAD_CTRL(ENET_PAD_CTRL),
 191         MX6_PAD_RGMII_RD0__ENET_RGMII_RD0       | MUX_PAD_CTRL(ENET_PAD_CTRL),
 192         MX6_PAD_RGMII_RD1__ENET_RGMII_RD1       | MUX_PAD_CTRL(ENET_PAD_CTRL),
 193         MX6_PAD_RGMII_RD2__ENET_RGMII_RD2       | MUX_PAD_CTRL(ENET_PAD_CTRL),
 194         MX6_PAD_RGMII_RD3__ENET_RGMII_RD3       | MUX_PAD_CTRL(ENET_PAD_CTRL),
 195         MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL      | MUX_PAD_CTRL(ENET_PAD_CTRL),
 196 };
 197
 198 /* wl1271 pads on nitrogen6x */
 199 iomux_v3_cfg_t const wl12xx_pads[] = {
 200         (MX6_PAD_NANDF_CS1__GPIO_6_14 & ~MUX_PAD_CTRL_MASK)
 201                 | MUX_PAD_CTRL(WEAK_PULLDOWN),
 202         (MX6_PAD_NANDF_CS2__GPIO_6_15 & ~MUX_PAD_CTRL_MASK)
 203                 | MUX_PAD_CTRL(OUTPUT_40OHM),
 204         (MX6_PAD_NANDF_CS3__GPIO_6_16 & ~MUX_PAD_CTRL_MASK)
 205                 | MUX_PAD_CTRL(OUTPUT_40OHM),
 206 };
 207 #define WL12XX_WL_IRQ_GP        IMX_GPIO_NR(6, 14)
 208 #define WL12XX_WL_ENABLE_GP     IMX_GPIO_NR(6, 15)
 209 #define WL12XX_BT_ENABLE_GP     IMX_GPIO_NR(6, 16)
 210
 211 /* Button assignments for J14 */
 212 static iomux_v3_cfg_t const button_pads[] = {
 213         /* Menu */
 214         MX6_PAD_NANDF_D1__GPIO_2_1      | MUX_PAD_CTRL(BUTTON_PAD_CTRL),
 215         /* Back */
 216         MX6_PAD_NANDF_D2__GPIO_2_2      | MUX_PAD_CTRL(BUTTON_PAD_CTRL),
 217         /* Labelled Search (mapped to Power under Android) */
 218         MX6_PAD_NANDF_D3__GPIO_2_3      | MUX_PAD_CTRL(BUTTON_PAD_CTRL),
 219         /* Home */
 220         MX6_PAD_NANDF_D4__GPIO_2_4      | MUX_PAD_CTRL(BUTTON_PAD_CTRL),
 221         /* Volume Down */
 222         MX6_PAD_GPIO_19__GPIO_4_5       | MUX_PAD_CTRL(BUTTON_PAD_CTRL),
 223         /* Volume Up */
 224         MX6_PAD_GPIO_18__GPIO_7_13      | MUX_PAD_CTRL(BUTTON_PAD_CTRL),
 225 };
 226
 227 static void setup_iomux_enet(void)
 228 {
 229         gpio_direction_output(IMX_GPIO_NR(3, 23), 0); /* SABRE Lite PHY rst */
 230         gpio_direction_output(IMX_GPIO_NR(1, 27), 0); /* Nitrogen6X PHY rst */
 231         gpio_direction_output(IMX_GPIO_NR(6, 30), 1);
 232         gpio_direction_output(IMX_GPIO_NR(6, 25), 1);
 233         gpio_direction_output(IMX_GPIO_NR(6, 27), 1);
 234         gpio_direction_output(IMX_GPIO_NR(6, 28), 1);
 235         gpio_direction_output(IMX_GPIO_NR(6, 29), 1);
 236         imx_iomux_v3_setup_multiple_pads(enet_pads1, ARRAY_SIZE(enet_pads1));
 237         gpio_direction_output(IMX_GPIO_NR(6, 24), 1);
 238
 239         /* Need delay 10ms according to KSZ9021 spec */
 240         udelay(1000 * 10);
 241         gpio_set_value(IMX_GPIO_NR(3, 23), 1); /* SABRE Lite PHY reset */
 242         gpio_set_value(IMX_GPIO_NR(1, 27), 1); /* Nitrogen6X PHY reset */
 243
 244         imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2));
 245 }
 246
 247 iomux_v3_cfg_t const usb_pads[] = {
 248         MX6_PAD_GPIO_17__GPIO_7_12 | MUX_PAD_CTRL(NO_PAD_CTRL),
 249 };
 250
 251 static void setup_iomux_uart(void)
 252 {
 253         imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
 254         imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads));
 255 }
 256
 257 #ifdef CONFIG_USB_EHCI_MX6
 258 int board_ehci_hcd_init(int port)
 259 {
 260         imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads));
 261
 262         /* Reset USB hub */
 263         gpio_direction_output(IMX_GPIO_NR(7, 12), 0);
 264         mdelay(2);
 265         gpio_set_value(IMX_GPIO_NR(7, 12), 1);
 266
 267         return 0;
 268 }
 269 #endif
 270
 271 #ifdef CONFIG_FSL_ESDHC
 272 struct fsl_esdhc_cfg usdhc_cfg[2] = {
 273         {USDHC3_BASE_ADDR},
 274         {USDHC4_BASE_ADDR},
 275 };
 276
 277 int board_mmc_getcd(struct mmc *mmc)
 278 {
 279         struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
 280         int ret;
 281
 282         if (cfg->esdhc_base == USDHC3_BASE_ADDR) {
 283                 gpio_direction_input(IMX_GPIO_NR(7, 0));
 284                 ret = !gpio_get_value(IMX_GPIO_NR(7, 0));
 285         } else {
 286                 gpio_direction_input(IMX_GPIO_NR(2, 6));
 287                 ret = !gpio_get_value(IMX_GPIO_NR(2, 6));
 288         }
 289
 290         return ret;
 291 }
 292
 293 int board_mmc_init(bd_t *bis)
 294 {
 295         s32 status = 0;
 296         u32 index = 0;
 297
 298         usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
 299         usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
 300
 301         usdhc_cfg[0].max_bus_width = 4;
 302         usdhc_cfg[1].max_bus_width = 4;
 303
 304         for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) {
 305                 switch (index) {
 306                 case 0:
 307                         imx_iomux_v3_setup_multiple_pads(
 308                                 usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
 309                         break;
 310                 case 1:
 311                        imx_iomux_v3_setup_multiple_pads(
 312                                usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
 313                        break;
 314                 default:
 315                        printf("Warning: you configured more USDHC controllers"
 316                                "(%d) then supported by the board (%d)\n",
 317                                index + 1, CONFIG_SYS_FSL_USDHC_NUM);
 318                        return status;
 319                 }
 320
 321                 status |= fsl_esdhc_initialize(bis, &usdhc_cfg[index]);
 322         }
 323
 324         return status;
 325 }
 326 #endif
 327
 328 #ifdef CONFIG_MXC_SPI
 329 iomux_v3_cfg_t const ecspi1_pads[] = {
 330         /* SS1 */
 331         MX6_PAD_EIM_D19__GPIO_3_19   | MUX_PAD_CTRL(SPI_PAD_CTRL),
 332         MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
 333         MX6_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
 334         MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
 335 };
 336
 337 void setup_spi(void)
 338 {
 339         imx_iomux_v3_setup_multiple_pads(ecspi1_pads,
 340                                          ARRAY_SIZE(ecspi1_pads));
 341 }
 342 #endif
 343
 344 int board_phy_config(struct phy_device *phydev)
 345 {
 346         /* min rx data delay */
 347         ksz9021_phy_extended_write(phydev,
 348                         MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, 0x0);
 349         /* min tx data delay */
 350         ksz9021_phy_extended_write(phydev,
 351                         MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, 0x0);
 352         /* max rx/tx clock delay, min rx/tx control */
 353         ksz9021_phy_extended_write(phydev,
 354                         MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, 0xf0f0);
 355         if (phydev->drv->config)
 356                 phydev->drv->config(phydev);
 357
 358         return 0;
 359 }
 360
 361 int board_eth_init(bd_t *bis)
 362 {
 363         uint32_t base = IMX_FEC_BASE;
 364         struct mii_dev *bus = NULL;
 365         struct phy_device *phydev = NULL;
 366         int ret;
 367
 368         setup_iomux_enet();
 369
 370 #ifdef CONFIG_FEC_MXC
 371         bus = fec_get_miibus(base, -1);
 372         if (!bus)
 373                 return 0;
 374         /* scan phy 4,5,6,7 */
 375         phydev = phy_find_by_mask(bus, (0xf << 4), PHY_INTERFACE_MODE_RGMII);
 376         if (!phydev) {
 377                 free(bus);
 378                 return 0;
 379         }
 380         printf("using phy at %d\n", phydev->addr);
 381         ret  = fec_probe(bis, -1, base, bus, phydev);
 382         if (ret) {
 383                 printf("FEC MXC: %s:failed\n", __func__);
 384                 free(phydev);
 385                 free(bus);
 386         }
 387 #endif
 388         return 0;
 389 }
 390
 391 static void setup_buttons(void)
 392 {
 393         imx_iomux_v3_setup_multiple_pads(button_pads,
 394                                          ARRAY_SIZE(button_pads));
 395 }
 396
 397 #ifdef CONFIG_CMD_SATA
 398
 399 int setup_sata(void)
 400 {
 401         struct iomuxc_base_regs *const iomuxc_regs
 402                 = (struct iomuxc_base_regs *) IOMUXC_BASE_ADDR;
 403         int ret = enable_sata_clock();
 404         if (ret)
 405                 return ret;
 406
 407         clrsetbits_le32(&iomuxc_regs->gpr[13],
 408                         IOMUXC_GPR13_SATA_MASK,
 409                         IOMUXC_GPR13_SATA_PHY_8_RXEQ_3P0DB
 410                         |IOMUXC_GPR13_SATA_PHY_7_SATA2M
 411                         |IOMUXC_GPR13_SATA_SPEED_3G
 412                         |(3<<IOMUXC_GPR13_SATA_PHY_6_SHIFT)
 413                         |IOMUXC_GPR13_SATA_SATA_PHY_5_SS_DISABLED
 414                         |IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_9_16
 415                         |IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P00_DB
 416                         |IOMUXC_GPR13_SATA_PHY_2_TX_1P104V
 417                         |IOMUXC_GPR13_SATA_PHY_1_SLOW);
 418
 419         return 0;
 420 }
 421 #endif
 422
 423 #if defined(CONFIG_VIDEO_IPUV3)
 424
 425 static iomux_v3_cfg_t const backlight_pads[] = {
 426         /* Backlight on RGB connector: J15 */
 427         MX6_PAD_SD1_DAT3__GPIO_1_21 | MUX_PAD_CTRL(NO_PAD_CTRL),
 428 #define RGB_BACKLIGHT_GP IMX_GPIO_NR(1, 21)
 429
 430         /* Backlight on LVDS connector: J6 */
 431         MX6_PAD_SD1_CMD__GPIO_1_18 | MUX_PAD_CTRL(NO_PAD_CTRL),
 432 #define LVDS_BACKLIGHT_GP IMX_GPIO_NR(1, 18)
 433 };
 434
 435 static iomux_v3_cfg_t const rgb_pads[] = {
 436         MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK,
 437         MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15,
 438         MX6_PAD_DI0_PIN2__IPU1_DI0_PIN2,
 439         MX6_PAD_DI0_PIN3__IPU1_DI0_PIN3,
 440         MX6_PAD_DI0_PIN4__GPIO_4_20,
 441         MX6_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0,
 442         MX6_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1,
 443         MX6_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2,
 444         MX6_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3,
 445         MX6_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4,
 446         MX6_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5,
 447         MX6_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6,
 448         MX6_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7,
 449         MX6_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8,
 450         MX6_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9,
 451         MX6_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10,
 452         MX6_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11,
 453         MX6_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12,
 454         MX6_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13,
 455         MX6_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14,
 456         MX6_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15,
 457         MX6_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16,
 458         MX6_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17,
 459         MX6_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18,
 460         MX6_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19,
 461         MX6_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20,
 462         MX6_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21,
 463         MX6_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22,
 464         MX6_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23,
 465 };
 466
 467 struct display_info_t {
 468         int     bus;
 469         int     addr;
 470         int     pixfmt;
 471         int     (*detect)(struct display_info_t const *dev);
 472         void    (*enable)(struct display_info_t const *dev);
 473         struct  fb_videomode mode;
 474 };
 475
 476
 477 static int detect_hdmi(struct display_info_t const *dev)
 478 {
 479         struct hdmi_regs *hdmi  = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
 480         return readb(&hdmi->phy_stat0) & HDMI_PHY_HPD;
 481 }
 482
 483 static void enable_hdmi(struct display_info_t const *dev)
 484 {
 485         struct hdmi_regs *hdmi  = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
 486         u8 reg;
 487         printf("%s: setup HDMI monitor\n", __func__);
 488         reg = readb(&hdmi->phy_conf0);
 489         reg |= HDMI_PHY_CONF0_PDZ_MASK;
 490         writeb(reg, &hdmi->phy_conf0);
 491
 492         udelay(3000);
 493         reg |= HDMI_PHY_CONF0_ENTMDS_MASK;
 494         writeb(reg, &hdmi->phy_conf0);
 495         udelay(3000);
 496         reg |= HDMI_PHY_CONF0_GEN2_TXPWRON_MASK;
 497         writeb(reg, &hdmi->phy_conf0);
 498         writeb(HDMI_MC_PHYRSTZ_ASSERT, &hdmi->mc_phyrstz);
 499 }
 500
 501 static int detect_i2c(struct display_info_t const *dev)
 502 {
 503         return ((0 == i2c_set_bus_num(dev->bus))
 504                 &&
 505                 (0 == i2c_probe(dev->addr)));
 506 }
 507
 508 static void enable_lvds(struct display_info_t const *dev)
 509 {
 510         struct iomuxc *iomux = (struct iomuxc *)
 511                                 IOMUXC_BASE_ADDR;
 512         u32 reg = readl(&iomux->gpr[2]);
 513         reg |= IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT;
 514         writel(reg, &iomux->gpr[2]);
 515         gpio_direction_output(LVDS_BACKLIGHT_GP, 1);
 516 }
 517
 518 static void enable_rgb(struct display_info_t const *dev)
 519 {
 520         imx_iomux_v3_setup_multiple_pads(
 521                 rgb_pads,
 522                  ARRAY_SIZE(rgb_pads));
 523         gpio_direction_output(RGB_BACKLIGHT_GP, 1);
 524 }
 525
 526 static struct display_info_t const displays[] = {{
 527         .bus    = -1,
 528         .addr   = 0,
 529         .pixfmt = IPU_PIX_FMT_RGB24,
 530         .detect = detect_hdmi,
 531         .enable = enable_hdmi,
 532         .mode   = {
 533                 .name           = "HDMI",
 534                 .refresh        = 60,
 535                 .xres           = 1024,
 536                 .yres           = 768,
 537                 .pixclock       = 15385,
 538                 .left_margin    = 220,
 539                 .right_margin   = 40,
 540                 .upper_margin   = 21,
 541                 .lower_margin   = 7,
 542                 .hsync_len      = 60,
 543                 .vsync_len      = 10,
 544                 .sync           = FB_SYNC_EXT,
 545                 .vmode          = FB_VMODE_NONINTERLACED
 546 } }, {
 547         .bus    = 2,
 548         .addr   = 0x4,
 549         .pixfmt = IPU_PIX_FMT_LVDS666,
 550         .detect = detect_i2c,
 551         .enable = enable_lvds,
 552         .mode   = {
 553                 .name           = "Hannstar-XGA",
 554                 .refresh        = 60,
 555                 .xres           = 1024,
 556                 .yres           = 768,
 557                 .pixclock       = 15385,
 558                 .left_margin    = 220,
 559                 .right_margin   = 40,
 560                 .upper_margin   = 21,
 561                 .lower_margin   = 7,
 562                 .hsync_len      = 60,
 563                 .vsync_len      = 10,
 564                 .sync           = FB_SYNC_EXT,
 565                 .vmode          = FB_VMODE_NONINTERLACED
 566 } }, {
 567         .bus    = 2,
 568         .addr   = 0x38,
 569         .pixfmt = IPU_PIX_FMT_LVDS666,
 570         .detect = detect_i2c,
 571         .enable = enable_lvds,
 572         .mode   = {
 573                 .name           = "wsvga-lvds",
 574                 .refresh        = 60,
 575                 .xres           = 1024,
 576                 .yres           = 600,
 577                 .pixclock       = 15385,
 578                 .left_margin    = 220,
 579                 .right_margin   = 40,
 580                 .upper_margin   = 21,
 581                 .lower_margin   = 7,
 582                 .hsync_len      = 60,
 583                 .vsync_len      = 10,
 584                 .sync           = FB_SYNC_EXT,
 585                 .vmode          = FB_VMODE_NONINTERLACED
 586 } }, {
 587         .bus    = 2,
 588         .addr   = 0x48,
 589         .pixfmt = IPU_PIX_FMT_RGB666,
 590         .detect = detect_i2c,
 591         .enable = enable_rgb,
 592         .mode   = {
 593                 .name           = "wvga-rgb",
 594                 .refresh        = 57,
 595                 .xres           = 800,
 596                 .yres           = 480,
 597                 .pixclock       = 37037,
 598                 .left_margin    = 40,
 599                 .right_margin   = 60,
 600                 .upper_margin   = 10,
 601                 .lower_margin   = 10,
 602                 .hsync_len      = 20,
 603                 .vsync_len      = 10,
 604                 .sync           = 0,
 605                 .vmode          = FB_VMODE_NONINTERLACED
 606 } } };
 607
 608 int board_video_skip(void)
 609 {
 610         int i;
 611         int ret;
 612         char const *panel = getenv("panel");
 613         if (!panel) {
 614                 for (i = 0; i < ARRAY_SIZE(displays); i++) {
 615                         struct display_info_t const *dev = displays+i;
 616                         if (dev->detect(dev)) {
 617                                 panel = dev->mode.name;
 618                                 printf("auto-detected panel %s\n", panel);
 619                                 break;
 620                         }
 621                 }
 622                 if (!panel) {
 623                         panel = displays[0].mode.name;
 624                         printf("No panel detected: default to %s\n", panel);
 625                 }
 626         } else {
 627                 for (i = 0; i < ARRAY_SIZE(displays); i++) {
 628                         if (!strcmp(panel, displays[i].mode.name))
 629                                 break;
 630                 }
 631         }
 632         if (i < ARRAY_SIZE(displays)) {
 633                 ret = ipuv3_fb_init(&displays[i].mode, 0,
 634                                     displays[i].pixfmt);
 635                 if (!ret) {
 636                         displays[i].enable(displays+i);
 637                         printf("Display: %s (%ux%u)\n",
 638                                displays[i].mode.name,
 639                                displays[i].mode.xres,
 640                                displays[i].mode.yres);
 641                 } else
 642                         printf("LCD %s cannot be configured: %d\n",
 643                                displays[i].mode.name, ret);
 644         } else {
 645                 printf("unsupported panel %s\n", panel);
 646                 ret = -EINVAL;
 647         }
 648         return (0 != ret);
 649 }
 650
 651 static void setup_display(void)
 652 {
 653         struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
 654         struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
 655         struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
 656         struct hdmi_regs *hdmi  = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
 657
 658         int reg;
 659
 660         /* Turn on LDB0,IPU,IPU DI0 clocks */
 661         reg = __raw_readl(&mxc_ccm->CCGR3);
 662         reg |=   MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET
 663                 |MXC_CCM_CCGR3_LDB_DI0_MASK;
 664         writel(reg, &mxc_ccm->CCGR3);
 665
 666         /* Turn on HDMI PHY clock */
 667         reg = __raw_readl(&mxc_ccm->CCGR2);
 668         reg |=  MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_MASK
 669                |MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_MASK;
 670         writel(reg, &mxc_ccm->CCGR2);
 671
 672         /* clear HDMI PHY reset */
 673         writeb(HDMI_MC_PHYRSTZ_DEASSERT, &hdmi->mc_phyrstz);
 674
 675         /* set PFD1_FRAC to 0x13 == 455 MHz (480*18)/0x13 */
 676         writel(ANATOP_PFD_480_PFD1_FRAC_MASK, &anatop->pfd_480_clr);
 677         writel(0x13<<ANATOP_PFD_480_PFD1_FRAC_SHIFT, &anatop->pfd_480_set);
 678
 679         /* set LDB0, LDB1 clk select to 011/011 */
 680         reg = readl(&mxc_ccm->cs2cdr);
 681         reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK
 682                  |MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
 683         reg |= (3<<MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET)
 684               |(3<<MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
 685         writel(reg, &mxc_ccm->cs2cdr);
 686
 687         reg = readl(&mxc_ccm->cscmr2);
 688         reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV;
 689         writel(reg, &mxc_ccm->cscmr2);
 690
 691         reg = readl(&mxc_ccm->chsccdr);
 692         reg &= ~(MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_MASK
 693                 |MXC_CCM_CHSCCDR_IPU1_DI0_PODF_MASK
 694                 |MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK);
 695         reg |= (CHSCCDR_CLK_SEL_LDB_DI0
 696                 <<MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET)
 697               |(CHSCCDR_PODF_DIVIDE_BY_3
 698                 <<MXC_CCM_CHSCCDR_IPU1_DI0_PODF_OFFSET)
 699               |(CHSCCDR_IPU_PRE_CLK_540M_PFD
 700                 <<MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_OFFSET);
 701         writel(reg, &mxc_ccm->chsccdr);
 702
 703         reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES
 704              |IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH
 705              |IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW
 706              |IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG
 707              |IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT
 708              |IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG
 709              |IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT
 710              |IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED
 711              |IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0;
 712         writel(reg, &iomux->gpr[2]);
 713
 714         reg = readl(&iomux->gpr[3]);
 715         reg = (reg & ~IOMUXC_GPR3_LVDS0_MUX_CTL_MASK)
 716             | (IOMUXC_GPR3_MUX_SRC_IPU1_DI0
 717                <<IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
 718         writel(reg, &iomux->gpr[3]);
 719
 720         /* backlights off until needed */
 721         imx_iomux_v3_setup_multiple_pads(backlight_pads,
 722                                          ARRAY_SIZE(backlight_pads));
 723         gpio_direction_input(LVDS_BACKLIGHT_GP);
 724         gpio_direction_input(RGB_BACKLIGHT_GP);
 725 }
 726 #endif
 727
 728 int board_early_init_f(void)
 729 {
 730         setup_iomux_uart();
 731
 732         /* Disable wl1271 For Nitrogen6w */
 733         gpio_direction_input(WL12XX_WL_IRQ_GP);
 734         gpio_direction_output(WL12XX_WL_ENABLE_GP, 0);
 735         gpio_direction_output(WL12XX_BT_ENABLE_GP, 0);
 736
 737         imx_iomux_v3_setup_multiple_pads(wl12xx_pads, ARRAY_SIZE(wl12xx_pads));
 738         setup_buttons();
 739
 740 #if defined(CONFIG_VIDEO_IPUV3)
 741         setup_display();
 742 #endif
 743         return 0;
 744 }
 745
 746 /*
 747  * Do not overwrite the console
 748  * Use always serial for U-Boot console
 749  */
 750 int overwrite_console(void)
 751 {
 752         return 1;
 753 }
 754
 755 int board_init(void)
 756 {
 757         /* address of boot parameters */
 758         gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 759
 760 #ifdef CONFIG_MXC_SPI
 761         setup_spi();
 762 #endif
 763         setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0);
 764         setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
 765         setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
 766
 767 #ifdef CONFIG_CMD_SATA
 768         setup_sata();
 769 #endif
 770
 771         return 0;
 772 }
 773
 774 int checkboard(void)
 775 {
 776         if (gpio_get_value(WL12XX_WL_IRQ_GP))
 777                 puts("Board: Nitrogen6X\n");
 778         else
 779                 puts("Board: SABRE Lite\n");
 780
 781         return 0;
 782 }
 783
 784 struct button_key {
 785         char const      *name;
 786         unsigned        gpnum;
 787         char            ident;
 788 };
 789
 790 static struct button_key const buttons[] = {
 791         {"back",        IMX_GPIO_NR(2, 2),      'B'},
 792         {"home",        IMX_GPIO_NR(2, 4),      'H'},
 793         {"menu",        IMX_GPIO_NR(2, 1),      'M'},
 794         {"search",      IMX_GPIO_NR(2, 3),      'S'},
 795         {"volup",       IMX_GPIO_NR(7, 13),     'V'},
 796         {"voldown",     IMX_GPIO_NR(4, 5),      'v'},
 797 };
 798
 799 /*
 800  * generate a null-terminated string containing the buttons pressed
 801  * returns number of keys pressed
 802  */
 803 static int read_keys(char *buf)
 804 {
 805         int i, numpressed = 0;
 806         for (i = 0; i < ARRAY_SIZE(buttons); i++) {
 807                 if (!gpio_get_value(buttons[i].gpnum))
 808                         buf[numpressed++] = buttons[i].ident;
 809         }
 810         buf[numpressed] = '\0';
 811         return numpressed;
 812 }
 813
 814 static int do_kbd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 815 {
 816         char envvalue[ARRAY_SIZE(buttons)+1];
 817         int numpressed = read_keys(envvalue);
 818         setenv("keybd", envvalue);
 819         return numpressed == 0;
 820 }
 821
 822 U_BOOT_CMD(
 823         kbd, 1, 1, do_kbd,
 824         "Tests for keypresses, sets 'keybd' environment variable",
 825         "Returns 0 (true) to shell if key is pressed."
 826 );
 827
 828 #ifdef CONFIG_PREBOOT
 829 static char const kbd_magic_prefix[] = "key_magic";
 830 static char const kbd_command_prefix[] = "key_cmd";
 831
 832 static void preboot_keys(void)
 833 {
 834         int numpressed;
 835         char keypress[ARRAY_SIZE(buttons)+1];
 836         numpressed = read_keys(keypress);
 837         if (numpressed) {
 838                 char *kbd_magic_keys = getenv("magic_keys");
 839                 char *suffix;
 840                 /*
 841                  * loop over all magic keys
 842                  */
 843                 for (suffix = kbd_magic_keys; *suffix; ++suffix) {
 844                         char *keys;
 845                         char magic[sizeof(kbd_magic_prefix) + 1];
 846                         sprintf(magic, "%s%c", kbd_magic_prefix, *suffix);
 847                         keys = getenv(magic);
 848                         if (keys) {
 849                                 if (!strcmp(keys, keypress))
 850                                         break;
 851                         }
 852                 }
 853                 if (*suffix) {
 854                         char cmd_name[sizeof(kbd_command_prefix) + 1];
 855                         char *cmd;
 856                         sprintf(cmd_name, "%s%c", kbd_command_prefix, *suffix);
 857                         cmd = getenv(cmd_name);
 858                         if (cmd) {
 859                                 setenv("preboot", cmd);
 860                                 return;
 861                         }
 862                 }
 863         }
 864 }
 865 #endif
 866
 867 #ifdef CONFIG_CMD_BMODE
 868 static const struct boot_mode board_boot_modes[] = {
 869         /* 4 bit bus width */
 870         {"mmc0",        MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
 871         {"mmc1",        MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)},
 872         {NULL,          0},
 873 };
 874 #endif
 875
 876 int misc_init_r(void)
 877 {
 878 #ifdef CONFIG_PREBOOT
 879         preboot_keys();
 880 #endif
 881
 882 #ifdef CONFIG_CMD_BMODE
 883         add_board_boot_modes(board_boot_modes);
 884 #endif
 885         return 0;
 886 }