board/compulab/cm_t335/spl.c

   1 /*
   2  * SPL specific code for Compulab CM-T335 board
   3  *
   4  * Board functions for Compulab CM-T335 board
   5  *
   6  * Copyright (C) 2013, Compulab Ltd - http://compulab.co.il/
   7  *
   8  * Author: Ilya Ledvich <ilya@compulab.co.il>
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #include <common.h>
  14 #include <errno.h>
  15
  16 #include <asm/arch/ddr_defs.h>
  17 #include <asm/arch/clock.h>
  18 #include <asm/arch/clocks_am33xx.h>
  19 #include <asm/arch/sys_proto.h>
  20 #include <asm/arch/hardware_am33xx.h>
  21 #include <asm/sizes.h>
  22
  23 const struct ctrl_ioregs ioregs = {
  24         .cm0ioctl               = MT41J128MJT125_IOCTRL_VALUE,
  25         .cm1ioctl               = MT41J128MJT125_IOCTRL_VALUE,
  26         .cm2ioctl               = MT41J128MJT125_IOCTRL_VALUE,
  27         .dt0ioctl               = MT41J128MJT125_IOCTRL_VALUE,
  28         .dt1ioctl               = MT41J128MJT125_IOCTRL_VALUE,
  29 };
  30
  31 static const struct ddr_data ddr3_data = {
  32         .datardsratio0          = MT41J128MJT125_RD_DQS,
  33         .datawdsratio0          = MT41J128MJT125_WR_DQS,
  34         .datafwsratio0          = MT41J128MJT125_PHY_FIFO_WE,
  35         .datawrsratio0          = MT41J128MJT125_PHY_WR_DATA,
  36 };
  37
  38 static const struct cmd_control ddr3_cmd_ctrl_data = {
  39         .cmd0csratio            = MT41J128MJT125_RATIO,
  40         .cmd0iclkout            = MT41J128MJT125_INVERT_CLKOUT,
  41
  42         .cmd1csratio            = MT41J128MJT125_RATIO,
  43         .cmd1iclkout            = MT41J128MJT125_INVERT_CLKOUT,
  44
  45         .cmd2csratio            = MT41J128MJT125_RATIO,
  46         .cmd2iclkout            = MT41J128MJT125_INVERT_CLKOUT,
  47 };
  48
  49 static struct emif_regs ddr3_emif_reg_data = {
  50         .sdram_config           = MT41J128MJT125_EMIF_SDCFG,
  51         .ref_ctrl               = MT41J128MJT125_EMIF_SDREF,
  52         .sdram_tim1             = MT41J128MJT125_EMIF_TIM1,
  53         .sdram_tim2             = MT41J128MJT125_EMIF_TIM2,
  54         .sdram_tim3             = MT41J128MJT125_EMIF_TIM3,
  55         .zq_config              = MT41J128MJT125_ZQ_CFG,
  56         .emif_ddr_phy_ctlr_1    = MT41J128MJT125_EMIF_READ_LATENCY |
  57                                         PHY_EN_DYN_PWRDN,
  58 };
  59
  60 const struct dpll_params dpll_ddr = {
  61 /*       M           N            M2  M3  M4  M5  M6 */
  62         303, (V_OSCK/1000000) - 1, 1, -1, -1, -1, -1};
  63
  64 void am33xx_spl_board_init(void)
  65 {
  66         struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
  67
  68         /* Get the frequency */
  69         dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
  70
  71         /* Set CORE Frequencies to OPP100 */
  72         do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
  73
  74         /* Set MPU Frequency to what we detected now that voltages are set */
  75         do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100);
  76 }
  77
  78 const struct dpll_params *get_dpll_ddr_params(void)
  79 {
  80         return &dpll_ddr;
  81 }
  82
  83 static void probe_sdram_size(long size)
  84 {
  85         switch (size) {
  86         case SZ_512M:
  87                 ddr3_emif_reg_data.sdram_config = MT41J256MJT125_EMIF_SDCFG;
  88                 break;
  89         case SZ_256M:
  90                 ddr3_emif_reg_data.sdram_config = MT41J128MJT125_EMIF_SDCFG;
  91                 break;
  92         case SZ_128M:
  93                 ddr3_emif_reg_data.sdram_config = MT41J64MJT125_EMIF_SDCFG;
  94                 break;
  95         default:
  96                 puts("Failed configuring DRAM, resetting...\n\n");
  97                 reset_cpu(0);
  98         }
  99         debug("%s: setting DRAM size to %ldM\n", __func__, size >> 20);
 100         config_ddr(303, &ioregs, &ddr3_data,
 101                    &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
 102 }
 103
 104 void sdram_init(void)
 105 {
 106         long size = SZ_1G;
 107
 108         do {
 109                 size = size / 2;
 110                 probe_sdram_size(size);
 111         } while (get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, size) < size);
 112
 113         return;
 114 }