]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - board/davedenx/aria/aria.c
Merge branch 'master' of git://git.denx.de/u-boot-usb
[karo-tx-uboot.git] / board / davedenx / aria / aria.c
1 /*
2  * (C) Copyright 2009 Wolfgang Denk <wd@denx.de>
3  * (C) Copyright 2009 Dave Srl www.dave.eu
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 #include <common.h>
9 #include <asm/bitops.h>
10 #include <command.h>
11 #include <asm/io.h>
12 #include <asm/processor.h>
13 #include <asm/mpc512x.h>
14 #include <fdt_support.h>
15 #ifdef CONFIG_MISC_INIT_R
16 #include <i2c.h>
17 #endif
18
19 DECLARE_GLOBAL_DATA_PTR;
20
21 phys_size_t initdram (int board_type)
22 {
23         return fixed_sdram(NULL, NULL, 0);
24 }
25
26 int misc_init_r(void)
27 {
28         u32 tmp;
29
30         /* we use I2C-2 for on-board eeprom */
31         i2c_set_bus_num(2);
32
33         tmp = in_be32((u32*)CONFIG_SYS_ARIA_FPGA_BASE);
34         printf("FPGA:  %u-%u.%u.%u\n",
35                 (tmp & 0xFF000000) >> 24,
36                 (tmp & 0x00FF0000) >> 16,
37                 (tmp & 0x0000FF00) >>  8,
38                  tmp & 0x000000FF
39         );
40
41         return 0;
42 }
43
44 static  iopin_t ioregs_init[] = {
45         /*
46          * FEC
47          */
48
49         /* FEC on PSCx_x*/
50         {
51                 offsetof(struct ioctrl512x, io_control_psc0_0), 5, 0,
52                 IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
53                 IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
54         },
55         {
56                 offsetof(struct ioctrl512x, io_control_psc1_0), 10, 0,
57                 IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
58                 IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
59         },
60         {
61                 offsetof(struct ioctrl512x, io_control_spdif_txclk), 3, 0,
62                 IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
63                 IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
64         },
65
66         /*
67          * DIU
68          */
69         /* FUNC2=DIU CLK */
70         {
71                 offsetof(struct ioctrl512x, io_control_psc6_0), 1, 0,
72                 IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
73                 IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
74         },
75         /* FUNC2=DIU_HSYNC */
76         {
77                 offsetof(struct ioctrl512x, io_control_psc6_1), 1, 0,
78                 IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
79                 IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
80         },
81         /* FUNC2=DIUVSYNC Sets Next 26 to DIU Pads */
82         {
83                 offsetof(struct ioctrl512x, io_control_psc6_4), 26, 0,
84                 IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
85                 IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
86         },
87         /*
88          * On board SRAM
89          */
90         /* FUNC2=/LPC CS6 */
91         {
92                 offsetof(struct ioctrl512x, io_control_j1850_rx), 1, 0,
93                 IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
94                 IO_PIN_PUE(1) | IO_PIN_ST(1) | IO_PIN_DS(3)
95         },
96 };
97
98 int checkboard (void)
99 {
100         puts("Board: ARIA\n");
101
102         /* initialize function mux & slew rate IO inter alia on IO Pins  */
103
104         iopin_initialize(ioregs_init, ARRAY_SIZE(ioregs_init));
105
106         return 0;
107 }
108
109 #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
110 int ft_board_setup(void *blob, bd_t *bd)
111 {
112         ft_cpu_setup(blob, bd);
113
114         return 0;
115 }
116 #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */