]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - board/earthlcd/favr-32-ezkit/favr-32-ezkit.c
f9ac330c33edee7aa790893524f66d3dbd212133
[karo-tx-uboot.git] / board / earthlcd / favr-32-ezkit / favr-32-ezkit.c
1 /*
2  * Copyright (C) 2008 Atmel Corporation
3  *
4  * SPDX-License-Identifier:     GPL-2.0+
5  */
6 #include <common.h>
7 #include <netdev.h>
8
9 #include <asm/io.h>
10 #include <asm/sdram.h>
11 #include <asm/arch/clk.h>
12 #include <asm/arch/hmatrix.h>
13 #include <asm/arch/mmu.h>
14 #include <asm/arch/portmux.h>
15
16 DECLARE_GLOBAL_DATA_PTR;
17
18 struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = {
19         {
20                 .virt_pgno      = CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT,
21                 .nr_pages       = CONFIG_SYS_FLASH_SIZE >> MMU_PAGE_SHIFT,
22                 .phys           = (CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT)
23                                         | MMU_VMR_CACHE_NONE,
24         }, {
25                 .virt_pgno      = CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT,
26                 .nr_pages       = EBI_SDRAM_SIZE >> MMU_PAGE_SHIFT,
27                 .phys           = (CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT)
28                                         | MMU_VMR_CACHE_WRBACK,
29         },
30 };
31
32 static const struct sdram_config sdram_config = {
33         /* MT48LC4M32B2P-6 (16 MB) */
34         .data_bits      = SDRAM_DATA_32BIT,
35         .row_bits       = 12,
36         .col_bits       = 8,
37         .bank_bits      = 2,
38         .cas            = 3,
39         .twr            = 2,
40         .trc            = 7,
41         .trp            = 2,
42         .trcd           = 2,
43         .tras           = 5,
44         .txsr           = 5,
45         /* 15.6 us */
46         .refresh_period = (156 * (SDRAMC_BUS_HZ / 1000)) / 10000,
47 };
48
49 int board_early_init_f(void)
50 {
51         /* Enable SDRAM in the EBI mux */
52         hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
53
54         portmux_enable_ebi(32, 23, 0, PORTMUX_DRIVE_HIGH);
55
56         sdram_init(uncached(EBI_SDRAM_BASE), &sdram_config);
57
58         portmux_enable_usart3(PORTMUX_DRIVE_MIN);
59 #if defined(CONFIG_MACB)
60         portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH);
61 #endif
62 #if defined(CONFIG_MMC)
63         portmux_enable_mmci(0, PORTMUX_MMCI_4BIT, PORTMUX_DRIVE_LOW);
64 #endif
65
66         return 0;
67 }
68
69 int board_early_init_r(void)
70 {
71         gd->bd->bi_phy_id[0] = 0x01;
72         return 0;
73 }
74
75 #if defined(CONFIG_MACB) && defined(CONFIG_CMD_NET)
76 int board_eth_init(bd_t *bi)
77 {
78         return macb_eth_initialize(0, (void *)ATMEL_BASE_MACB0,
79                 bi->bi_phy_id[0]);
80 }
81 #endif