]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - board/esd/canbt/flash.c
zynq: Enable axi ethernet and emaclite driver initialization
[karo-tx-uboot.git] / board / esd / canbt / flash.c
1 /*
2  * (C) Copyright 2001
3  * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 #include <common.h>
9 #include <asm/ppc4xx.h>
10 #include <asm/processor.h>
11
12 /*
13  * include common flash code (for esd boards)
14  */
15 #include "../common/flash.c"
16
17 /*-----------------------------------------------------------------------
18  * Functions
19  */
20 static ulong flash_get_size (vu_long *addr, flash_info_t *info);
21 static void flash_get_offsets (ulong base, flash_info_t *info);
22
23 /*-----------------------------------------------------------------------
24  */
25
26 unsigned long flash_init (void)
27 {
28         unsigned long size_b0;
29         int i;
30         uint pbcr;
31         unsigned long base_b0;
32
33         /* Init: no FLASHes known */
34         for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
35                 flash_info[i].flash_id = FLASH_UNKNOWN;
36         }
37
38         /* Static FLASH Bank configuration here - FIXME XXX */
39
40         size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
41
42         if (flash_info[0].flash_id == FLASH_UNKNOWN) {
43                 printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
44                         size_b0, size_b0<<20);
45         }
46
47         /* Setup offsets */
48         flash_get_offsets (-size_b0, &flash_info[0]);
49
50         /* Re-do sizing to get full correct info */
51         mtdcr(EBC0_CFGADDR, PB0CR);
52         pbcr = mfdcr(EBC0_CFGDATA);
53         mtdcr(EBC0_CFGADDR, PB0CR);
54         base_b0 = -size_b0;
55         pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17);
56         mtdcr(EBC0_CFGDATA, pbcr);
57         /*          printf("PB1CR = %x\n", pbcr); */
58
59         /* Monitor protection ON by default */
60         (void)flash_protect(FLAG_PROTECT_SET,
61                             -monitor_flash_len,
62                             0xffffffff,
63                             &flash_info[0]);
64
65         flash_info[0].size = size_b0;
66
67         return (size_b0);
68 }