board/freescale/b4860qds/b4860qds.c

   1 /*
   2  * Copyright 2011-2012 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #include <common.h>
   8 #include <command.h>
   9 #include <i2c.h>
  10 #include <netdev.h>
  11 #include <linux/compiler.h>
  12 #include <asm/mmu.h>
  13 #include <asm/processor.h>
  14 #include <asm/cache.h>
  15 #include <asm/immap_85xx.h>
  16 #include <asm/fsl_law.h>
  17 #include <asm/fsl_serdes.h>
  18 #include <asm/fsl_portals.h>
  19 #include <asm/fsl_liodn.h>
  20 #include <fm_eth.h>
  21
  22 #include "../common/qixis.h"
  23 #include "../common/vsc3316_3308.h"
  24 #include "b4860qds.h"
  25 #include "b4860qds_qixis.h"
  26 #include "b4860qds_crossbar_con.h"
  27
  28 #define CLK_MUX_SEL_MASK        0x4
  29 #define ETH_PHY_CLK_OUT         0x4
  30
  31 DECLARE_GLOBAL_DATA_PTR;
  32
  33 int checkboard(void)
  34 {
  35         char buf[64];
  36         u8 sw;
  37         struct cpu_type *cpu = gd->arch.cpu;
  38         ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
  39         unsigned int i;
  40         static const char *const freq[] = {"100", "125", "156.25", "161.13",
  41                                                 "122.88", "122.88", "122.88"};
  42         int clock;
  43
  44         printf("Board: %sQDS, ", cpu->name);
  45         printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, ",
  46                 QIXIS_READ(id), QIXIS_READ(arch));
  47
  48         sw = QIXIS_READ(brdcfg[0]);
  49         sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
  50
  51         if (sw < 0x8)
  52                 printf("vBank: %d\n", sw);
  53         else if (sw >= 0x8 && sw <= 0xE)
  54                 puts("NAND\n");
  55         else
  56                 printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
  57
  58         printf("FPGA: v%d (%s), build %d",
  59                 (int)QIXIS_READ(scver), qixis_read_tag(buf),
  60                 (int)qixis_read_minor());
  61         /* the timestamp string contains "\n" at the end */
  62         printf(" on %s", qixis_read_time(buf));
  63
  64         /* Display the RCW, so that no one gets confused as to what RCW
  65          * we're actually using for this boot.
  66          */
  67         puts("Reset Configuration Word (RCW):");
  68         for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) {
  69                 u32 rcw = in_be32(&gur->rcwsr[i]);
  70
  71                 if ((i % 4) == 0)
  72                         printf("\n       %08x:", i * 4);
  73                 printf(" %08x", rcw);
  74         }
  75         puts("\n");
  76
  77         /*
  78          * Display the actual SERDES reference clocks as configured by the
  79          * dip switches on the board.  Note that the SWx registers could
  80          * technically be set to force the reference clocks to match the
  81          * values that the SERDES expects (or vice versa).  For now, however,
  82          * we just display both values and hope the user notices when they
  83          * don't match.
  84          */
  85         puts("SERDES Reference Clocks: ");
  86         sw = QIXIS_READ(brdcfg[2]);
  87         clock = (sw >> 5) & 7;
  88         printf("Bank1=%sMHz ", freq[clock]);
  89         sw = QIXIS_READ(brdcfg[4]);
  90         clock = (sw >> 6) & 3;
  91         printf("Bank2=%sMHz\n", freq[clock]);
  92
  93         return 0;
  94 }
  95
  96 int select_i2c_ch_pca(u8 ch)
  97 {
  98         int ret;
  99
 100         /* Selecting proper channel via PCA*/
 101         ret = i2c_write(I2C_MUX_PCA_ADDR, 0x0, 1, &ch, 1);
 102         if (ret) {
 103                 printf("PCA: failed to select proper channel.\n");
 104                 return ret;
 105         }
 106
 107         return 0;
 108 }
 109
 110 int configure_vsc3316_3308(void)
 111 {
 112         ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 113         unsigned int num_vsc16_con, num_vsc08_con;
 114         u32 serdes1_prtcl, serdes2_prtcl;
 115         int ret;
 116
 117         serdes1_prtcl = in_be32(&gur->rcwsr[4]) &
 118                         FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
 119         if (!serdes1_prtcl) {
 120                 printf("SERDES1 is not enabled\n");
 121                 return 0;
 122         }
 123         serdes1_prtcl >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
 124         debug("Using SERDES1 Protocol: 0x%x:\n", serdes1_prtcl);
 125
 126         serdes2_prtcl = in_be32(&gur->rcwsr[4]) &
 127                         FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
 128         if (!serdes2_prtcl) {
 129                 printf("SERDES2 is not enabled\n");
 130                 return 0;
 131         }
 132         serdes2_prtcl >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
 133         debug("Using SERDES2 Protocol: 0x%x:\n", serdes2_prtcl);
 134
 135         switch (serdes1_prtcl) {
 136         case 0x2a:
 137         case 0x2C:
 138         case 0x2D:
 139         case 0x2E:
 140                         /*
 141                          * Configuration:
 142                          * SERDES: 1
 143                          * Lanes: A,B: SGMII
 144                          * Lanes: C,D,E,F,G,H: CPRI
 145                          */
 146                 debug("Configuring crossbar to use onboard SGMII PHYs:"
 147                                 "srds_prctl:%x\n", serdes1_prtcl);
 148                 num_vsc16_con = NUM_CON_VSC3316;
 149                 /* Configure VSC3316 crossbar switch */
 150                 ret = select_i2c_ch_pca(I2C_CH_VSC3316);
 151                 if (!ret) {
 152                         ret = vsc3316_config(VSC3316_TX_ADDRESS,
 153                                         vsc16_tx_4sfp_sgmii_12_56,
 154                                         num_vsc16_con);
 155                         if (ret)
 156                                 return ret;
 157                         ret = vsc3316_config(VSC3316_RX_ADDRESS,
 158                                         vsc16_rx_4sfp_sgmii_12_56,
 159                                         num_vsc16_con);
 160                         if (ret)
 161                                 return ret;
 162                 } else {
 163                         return ret;
 164                 }
 165                 break;
 166
 167 #ifdef CONFIG_PPC_B4420
 168         case 0x18:
 169                         /*
 170                          * Configuration:
 171                          * SERDES: 1
 172                          * Lanes: A,B,C,D: SGMII
 173                          * Lanes: E,F,G,H: CPRI
 174                          */
 175                 debug("Configuring crossbar to use onboard SGMII PHYs:"
 176                                 "srds_prctl:%x\n", serdes1_prtcl);
 177                 num_vsc16_con = NUM_CON_VSC3316;
 178                 /* Configure VSC3316 crossbar switch */
 179                 ret = select_i2c_ch_pca(I2C_CH_VSC3316);
 180                 if (!ret) {
 181                         ret = vsc3316_config(VSC3316_TX_ADDRESS,
 182                                         vsc16_tx_sgmii_lane_cd, num_vsc16_con);
 183                         if (ret)
 184                                 return ret;
 185                         ret = vsc3316_config(VSC3316_RX_ADDRESS,
 186                                         vsc16_rx_sgmii_lane_cd, num_vsc16_con);
 187                         if (ret)
 188                                 return ret;
 189                 } else {
 190                         return ret;
 191                 }
 192                 break;
 193 #endif
 194
 195         case 0x3E:
 196         case 0x0D:
 197         case 0x0E:
 198         case 0x12:
 199                 num_vsc16_con = NUM_CON_VSC3316;
 200                 /* Configure VSC3316 crossbar switch */
 201                 ret = select_i2c_ch_pca(I2C_CH_VSC3316);
 202                 if (!ret) {
 203                         ret = vsc3316_config(VSC3316_TX_ADDRESS,
 204                                         vsc16_tx_sfp, num_vsc16_con);
 205                         if (ret)
 206                                 return ret;
 207                         ret = vsc3316_config(VSC3316_RX_ADDRESS,
 208                                         vsc16_rx_sfp, num_vsc16_con);
 209                         if (ret)
 210                                 return ret;
 211                 } else {
 212                         return ret;
 213                 }
 214                 break;
 215         default:
 216                 printf("WARNING:VSC crossbars programming not supported for:%x"
 217                                         " SerDes1 Protocol.\n", serdes1_prtcl);
 218                 return -1;
 219         }
 220
 221         switch (serdes2_prtcl) {
 222         case 0x9E:
 223         case 0x9A:
 224         case 0x98:
 225         case 0xb2:
 226         case 0x49:
 227         case 0x4E:
 228         case 0x8D:
 229         case 0x7A:
 230                 num_vsc08_con = NUM_CON_VSC3308;
 231                 /* Configure VSC3308 crossbar switch */
 232                 ret = select_i2c_ch_pca(I2C_CH_VSC3308);
 233                 if (!ret) {
 234                         ret = vsc3308_config(VSC3308_TX_ADDRESS,
 235                                         vsc08_tx_amc, num_vsc08_con);
 236                         if (ret)
 237                                 return ret;
 238                         ret = vsc3308_config(VSC3308_RX_ADDRESS,
 239                                         vsc08_rx_amc, num_vsc08_con);
 240                         if (ret)
 241                                 return ret;
 242                 } else {
 243                         return ret;
 244                 }
 245                 break;
 246         default:
 247                 printf("WARNING:VSC crossbars programming not supported for: %x"
 248                                         " SerDes2 Protocol.\n", serdes2_prtcl);
 249                 return -1;
 250         }
 251
 252         return 0;
 253 }
 254
 255 int board_early_init_r(void)
 256 {
 257         const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
 258         const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
 259
 260         /*
 261          * Remap Boot flash + PROMJET region to caching-inhibited
 262          * so that flash can be erased properly.
 263          */
 264
 265         /* Flush d-cache and invalidate i-cache of any FLASH data */
 266         flush_dcache();
 267         invalidate_icache();
 268
 269         /* invalidate existing TLB entry for flash + promjet */
 270         disable_tlb(flash_esel);
 271
 272         set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
 273                         MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 274                         0, flash_esel, BOOKE_PAGESZ_256M, 1);
 275
 276         set_liodns();
 277 #ifdef CONFIG_SYS_DPAA_QBMAN
 278         setup_portals();
 279 #endif
 280
 281         /* Configure VSC3316 and VSC3308 crossbar switches */
 282         if (configure_vsc3316_3308())
 283                 printf("VSC:failed to configure VSC3316/3308.\n");
 284         else
 285                 printf("VSC:VSC3316/3308 successfully configured.\n");
 286
 287         select_i2c_ch_pca(I2C_CH_DEFAULT);
 288
 289         return 0;
 290 }
 291
 292 unsigned long get_board_sys_clk(void)
 293 {
 294         u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
 295
 296         switch ((sysclk_conf & 0x0C) >> 2) {
 297         case QIXIS_CLK_100:
 298                 return 100000000;
 299         case QIXIS_CLK_125:
 300                 return 125000000;
 301         case QIXIS_CLK_133:
 302                 return 133333333;
 303         }
 304         return 66666666;
 305 }
 306
 307 unsigned long get_board_ddr_clk(void)
 308 {
 309         u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
 310
 311         switch (ddrclk_conf & 0x03) {
 312         case QIXIS_CLK_100:
 313                 return 100000000;
 314         case QIXIS_CLK_125:
 315                 return 125000000;
 316         case QIXIS_CLK_133:
 317                 return 133333333;
 318         }
 319         return 66666666;
 320 }
 321
 322 static int serdes_refclock(u8 sw, u8 sdclk)
 323 {
 324         unsigned int clock;
 325         int ret = -1;
 326         u8 brdcfg4;
 327
 328         if (sdclk == 1) {
 329                 brdcfg4 = QIXIS_READ(brdcfg[4]);
 330                 if ((brdcfg4 & CLK_MUX_SEL_MASK) == ETH_PHY_CLK_OUT)
 331                         return SRDS_PLLCR0_RFCK_SEL_125;
 332                 else
 333                         clock = (sw >> 5) & 7;
 334         } else
 335                 clock = (sw >> 6) & 3;
 336
 337         switch (clock) {
 338         case 0:
 339                 ret = SRDS_PLLCR0_RFCK_SEL_100;
 340                 break;
 341         case 1:
 342                 ret = SRDS_PLLCR0_RFCK_SEL_125;
 343                 break;
 344         case 2:
 345                 ret = SRDS_PLLCR0_RFCK_SEL_156_25;
 346                 break;
 347         case 3:
 348                 ret = SRDS_PLLCR0_RFCK_SEL_161_13;
 349                 break;
 350         case 4:
 351         case 5:
 352         case 6:
 353                 ret = SRDS_PLLCR0_RFCK_SEL_122_88;
 354                 break;
 355         default:
 356                 ret = -1;
 357                 break;
 358         }
 359
 360         return ret;
 361 }
 362
 363 static const char *serdes_clock_to_string(u32 clock)
 364 {
 365         switch (clock) {
 366         case SRDS_PLLCR0_RFCK_SEL_100:
 367                 return "100";
 368         case SRDS_PLLCR0_RFCK_SEL_125:
 369                 return "125";
 370         case SRDS_PLLCR0_RFCK_SEL_156_25:
 371                 return "156.25";
 372         case SRDS_PLLCR0_RFCK_SEL_161_13:
 373                 return "161.13";
 374         default:
 375                 return "122.88";
 376         }
 377 }
 378
 379 #define NUM_SRDS_BANKS  2
 380
 381 int misc_init_r(void)
 382 {
 383         u8 sw;
 384         serdes_corenet_t *srds_regs =
 385                 (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
 386         u32 actual[NUM_SRDS_BANKS];
 387         unsigned int i;
 388         int clock;
 389
 390         sw = QIXIS_READ(brdcfg[2]);
 391         clock = serdes_refclock(sw, 1);
 392         if (clock >= 0)
 393                 actual[0] = clock;
 394         else
 395                 printf("Warning: SDREFCLK1 switch setting is unsupported\n");
 396
 397         sw = QIXIS_READ(brdcfg[4]);
 398         clock = serdes_refclock(sw, 2);
 399         if (clock >= 0)
 400                 actual[1] = clock;
 401         else
 402                 printf("Warning: SDREFCLK2 switch setting unsupported\n");
 403
 404         for (i = 0; i < NUM_SRDS_BANKS; i++) {
 405                 u32 pllcr0 = srds_regs->bank[i].pllcr0;
 406                 u32 expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK;
 407                 if (expected != actual[i]) {
 408                         printf("Warning: SERDES bank %u expects reference clock"
 409                                " %sMHz, but actual is %sMHz\n", i + 1,
 410                                serdes_clock_to_string(expected),
 411                                serdes_clock_to_string(actual[i]));
 412                 }
 413         }
 414
 415         return 0;
 416 }
 417
 418 void ft_board_setup(void *blob, bd_t *bd)
 419 {
 420         phys_addr_t base;
 421         phys_size_t size;
 422
 423         ft_cpu_setup(blob, bd);
 424
 425         base = getenv_bootm_low();
 426         size = getenv_bootm_size();
 427
 428         fdt_fixup_memory(blob, (u64)base, (u64)size);
 429
 430 #ifdef CONFIG_PCI
 431         pci_of_setup(blob, bd);
 432 #endif
 433
 434         fdt_fixup_liodn(blob);
 435
 436 #ifdef CONFIG_HAS_FSL_DR_USB
 437         fdt_fixup_dr_usb(blob, bd);
 438 #endif
 439
 440 #ifdef CONFIG_SYS_DPAA_FMAN
 441         fdt_fixup_fman_ethernet(blob);
 442         fdt_fixup_board_enet(blob);
 443 #endif
 444 }
 445
 446 /*
 447  * Dump board switch settings.
 448  * The bits that cannot be read/sampled via some FPGA or some
 449  * registers, they will be displayed as
 450  * underscore in binary format. mask[] has those bits.
 451  * Some bits are calculated differently than the actual switches
 452  * if booting with overriding by FPGA.
 453  */
 454 void qixis_dump_switch(void)
 455 {
 456         int i;
 457         u8 sw[5];
 458
 459         /*
 460          * Any bit with 1 means that bit cannot be reverse engineered.
 461          * It will be displayed as _ in binary format.
 462          */
 463         static const u8 mask[] = {0x07, 0, 0, 0xff, 0};
 464         char buf[10];
 465         u8 brdcfg[16], dutcfg[16];
 466
 467         for (i = 0; i < 16; i++) {
 468                 brdcfg[i] = qixis_read(offsetof(struct qixis, brdcfg[0]) + i);
 469                 dutcfg[i] = qixis_read(offsetof(struct qixis, dutcfg[0]) + i);
 470         }
 471
 472         sw[0] = ((brdcfg[0] & 0x0f) << 4)       | \
 473                 (brdcfg[9] & 0x08);
 474         sw[1] = ((dutcfg[1] & 0x01) << 7)       | \
 475                 ((dutcfg[2] & 0x07) << 4)       | \
 476                 ((dutcfg[6] & 0x10) >> 1)       | \
 477                 ((dutcfg[6] & 0x80) >> 5)       | \
 478                 ((dutcfg[1] & 0x40) >> 5)       | \
 479                 (dutcfg[6] & 0x01);
 480         sw[2] = dutcfg[0];
 481         sw[3] = 0;
 482         sw[4] = ((brdcfg[1] & 0x30) << 2)       | \
 483                 ((brdcfg[1] & 0xc0) >> 2)       | \
 484                 (brdcfg[1] & 0x0f);
 485
 486         puts("DIP switch settings:\n");
 487         for (i = 0; i < 5; i++) {
 488                 printf("SW%d         = 0b%s (0x%02x)\n",
 489                         i + 1, byte_to_binary_mask(sw[i], mask[i], buf), sw[i]);
 490         }
 491 }