board/freescale/b4860qds/eth_b4860qds.c

   1 /*
   2  * Copyright 2012 Freescale Semiconductor, Inc.
   3  * Author: Sandeep Kumar Singh <sandeep@freescale.com>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 /* This file is based on board/freescale/corenet_ds/eth_superhydra.c */
   9
  10 /*
  11  * This file handles the board muxing between the Fman Ethernet MACs and
  12  * the RGMII/SGMII/XGMII PHYs on a Freescale B4860 "Centaur". The SGMII
  13  * PHYs are the two on-board 1Gb ports. There are no RGMII PHY on board.
  14  * The 10Gb XGMII PHY is provided via the XAUI riser card. There is only
  15  * one Fman device on B4860. The SERDES configuration is used to determine
  16  * where the SGMII and XAUI cards exist, and also which Fman MACs are routed
  17  * to which PHYs. So for a given Fman MAC, there is one and only PHY it
  18  * connects to. MACs cannot be routed to PHYs dynamically. This configuration
  19  * is done at boot time by reading SERDES protocol from RCW.
  20  */
  21
  22 #include <common.h>
  23 #include <netdev.h>
  24 #include <asm/fsl_serdes.h>
  25 #include <fm_eth.h>
  26 #include <fsl_mdio.h>
  27 #include <malloc.h>
  28 #include <fdt_support.h>
  29 #include <asm/fsl_dtsec.h>
  30
  31 #include "../common/ngpixis.h"
  32 #include "../common/fman.h"
  33 #include "../common/qixis.h"
  34 #include "b4860qds_qixis.h"
  35
  36 #define EMI_NONE       0xFFFFFFFF
  37
  38 #ifdef CONFIG_FMAN_ENET
  39
  40 /*
  41  * Mapping of all 16 SERDES lanes to board slots. A value n(>0) will mean that
  42  * lane at index is mapped to slot number n. A value of '0' will mean
  43  * that the mapping must be determined dynamically, or that the lane maps to
  44  * something other than a board slot
  45  */
  46 static u8 lane_to_slot[] = {
  47         0, 0, 0, 0,
  48         0, 0, 0, 0,
  49         1, 1, 1, 1,
  50         0, 0, 0, 0
  51 };
  52
  53 /*
  54  * This function initializes the lane_to_slot[] array. It reads RCW to check
  55  * if Serdes2{E,F,G,H} is configured as slot 2 or as SFP and initializes
  56  * lane_to_slot[] accordingly
  57  */
  58 static void initialize_lane_to_slot(void)
  59 {
  60         unsigned int  serdes2_prtcl;
  61         ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
  62         serdes2_prtcl = in_be32(&gur->rcwsr[4]) &
  63                 FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
  64         serdes2_prtcl >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
  65         debug("Initializing lane to slot: Serdes2 protocol: %x\n",
  66                         serdes2_prtcl);
  67
  68         switch (serdes2_prtcl) {
  69         case 0x17:
  70         case 0x18:
  71                 /*
  72                  * Configuration:
  73                  * SERDES: 2
  74                  * Lanes: A,B,C,D: SGMII
  75                  * Lanes: E,F: Aur
  76                  * Lanes: G,H: SRIO
  77                  */
  78         case 0x91:
  79                 /*
  80                  * Configuration:
  81                  * SERDES: 2
  82                  * Lanes: A,B: SGMII
  83                  * Lanes: C,D: SRIO2
  84                  * Lanes: E,F,G,H: XAUI2
  85                  */
  86         case 0x93:
  87                 /*
  88                  * Configuration:
  89                  * SERDES: 2
  90                  * Lanes: A,B,C,D: SGMII
  91                  * Lanes: E,F,G,H: XAUI2
  92                  */
  93         case 0x98:
  94                 /*
  95                  * Configuration:
  96                  * SERDES: 2
  97                  * Lanes: A,B,C,D: XAUI2
  98                  * Lanes: E,F,G,H: XAUI2
  99                  */
 100         case 0x9a:
 101                 /*
 102                  * Configuration:
 103                  * SERDES: 2
 104                  * Lanes: A,B: PCI
 105                  * Lanes: C,D: SGMII
 106                  * Lanes: E,F,G,H: XAUI2
 107                  */
 108         case 0x9e:
 109                 /*
 110                  * Configuration:
 111                  * SERDES: 2
 112                  * Lanes: A,B,C,D: PCI
 113                  * Lanes: E,F,G,H: XAUI2
 114                  */
 115         case 0xb1:
 116         case 0xb2:
 117         case 0x8c:
 118         case 0x8d:
 119                 /*
 120                  * Configuration:
 121                  * SERDES: 2
 122                  * Lanes: A,B,C,D: PCI
 123                  * Lanes: E,F: SGMII 3&4
 124                  * Lanes: G,H: XFI
 125                  */
 126         case 0xc2:
 127                 /*
 128                  * Configuration:
 129                  * SERDES: 2
 130                  * Lanes: A,B: SGMII
 131                  * Lanes: C,D: SRIO2
 132                  * Lanes: E,F,G,H: XAUI2
 133                  */
 134                 lane_to_slot[12] = 2;
 135                 lane_to_slot[13] = lane_to_slot[12];
 136                 lane_to_slot[14] = lane_to_slot[12];
 137                 lane_to_slot[15] = lane_to_slot[12];
 138                 break;
 139
 140         default:
 141                 printf("Fman: Unsupported SerDes2 Protocol 0x%02x\n",
 142                                 serdes2_prtcl);
 143                         break;
 144         }
 145         return;
 146 }
 147
 148 #endif /* #ifdef CONFIG_FMAN_ENET */
 149
 150 int board_eth_init(bd_t *bis)
 151 {
 152 #ifdef CONFIG_FMAN_ENET
 153         struct memac_mdio_info memac_mdio_info;
 154         struct memac_mdio_info tg_memac_mdio_info;
 155         unsigned int i;
 156         unsigned int  serdes1_prtcl, serdes2_prtcl;
 157         int qsgmii;
 158         struct mii_dev *bus;
 159         ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 160         serdes1_prtcl = in_be32(&gur->rcwsr[4]) &
 161                 FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
 162         if (!serdes1_prtcl) {
 163                 printf("SERDES1 is not enabled\n");
 164                 return 0;
 165         }
 166         serdes1_prtcl >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
 167         debug("Using SERDES1 Protocol: 0x%x:\n", serdes1_prtcl);
 168
 169         serdes2_prtcl = in_be32(&gur->rcwsr[4]) &
 170                 FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
 171         if (!serdes2_prtcl) {
 172                 printf("SERDES2 is not enabled\n");
 173                 return 0;
 174         }
 175         serdes2_prtcl >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
 176         debug("Using SERDES2 Protocol: 0x%x:\n", serdes2_prtcl);
 177
 178         printf("Initializing Fman\n");
 179
 180         initialize_lane_to_slot();
 181
 182         memac_mdio_info.regs =
 183                 (struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR;
 184         memac_mdio_info.name = DEFAULT_FM_MDIO_NAME;
 185
 186         /* Register the real 1G MDIO bus */
 187         fm_memac_mdio_init(bis, &memac_mdio_info);
 188
 189         tg_memac_mdio_info.regs =
 190                 (struct memac_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR;
 191         tg_memac_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME;
 192
 193         /* Register the real 10G MDIO bus */
 194         fm_memac_mdio_init(bis, &tg_memac_mdio_info);
 195
 196         /*
 197          * Program the two on board DTSEC PHY addresses assuming that they are
 198          * all SGMII. RGMII is not supported on this board. Setting SGMII 5 and
 199          * 6 to on board SGMII phys
 200          */
 201         fm_info_set_phy_address(FM1_DTSEC5, CONFIG_SYS_FM1_ONBOARD_PHY1_ADDR);
 202         fm_info_set_phy_address(FM1_DTSEC6, CONFIG_SYS_FM1_ONBOARD_PHY2_ADDR);
 203
 204         switch (serdes1_prtcl) {
 205         case 0x29:
 206         case 0x2a:
 207                 /* Serdes 1: A-B SGMII, Configuring DTSEC 5 and 6 */
 208                 debug("Set phy addresses for FM1_DTSEC5:%x, FM1_DTSEC6:%x\n",
 209                       CONFIG_SYS_FM1_ONBOARD_PHY1_ADDR,
 210                       CONFIG_SYS_FM1_ONBOARD_PHY2_ADDR);
 211                 fm_info_set_phy_address(FM1_DTSEC5,
 212                                 CONFIG_SYS_FM1_ONBOARD_PHY1_ADDR);
 213                 fm_info_set_phy_address(FM1_DTSEC6,
 214                                 CONFIG_SYS_FM1_ONBOARD_PHY2_ADDR);
 215                 break;
 216 #ifdef CONFIG_PPC_B4420
 217         case 0x17:
 218         case 0x18:
 219                 /* Serdes 1: A-D SGMII, Configuring on board dual SGMII Phy */
 220                 debug("Set phy addresses for FM1_DTSEC3:%x, FM1_DTSEC4:%x\n",
 221                       CONFIG_SYS_FM1_ONBOARD_PHY1_ADDR,
 222                       CONFIG_SYS_FM1_ONBOARD_PHY2_ADDR);
 223                 /* Fixing Serdes clock by programming FPGA register */
 224                 QIXIS_WRITE(brdcfg[4], QIXIS_SRDS1CLK_125);
 225                 fm_info_set_phy_address(FM1_DTSEC3,
 226                                 CONFIG_SYS_FM1_ONBOARD_PHY1_ADDR);
 227                 fm_info_set_phy_address(FM1_DTSEC4,
 228                                 CONFIG_SYS_FM1_ONBOARD_PHY2_ADDR);
 229                 break;
 230 #endif
 231         default:
 232                 printf("Fman:  Unsupported SerDes1 Protocol 0x%02x\n",
 233                                 serdes1_prtcl);
 234                 break;
 235         }
 236         switch (serdes2_prtcl) {
 237         case 0x17:
 238         case 0x18:
 239                 debug("Set phy address on SGMII Riser for FM1_DTSEC1:%x\n",
 240                       CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR);
 241                 fm_info_set_phy_address(FM1_DTSEC1,
 242                                 CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR);
 243                 fm_info_set_phy_address(FM1_DTSEC2,
 244                                 CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR);
 245                 fm_info_set_phy_address(FM1_DTSEC3,
 246                                 CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR);
 247                 fm_info_set_phy_address(FM1_DTSEC4,
 248                                 CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR);
 249                 break;
 250         case 0x48:
 251         case 0x49:
 252                 debug("Set phy address on SGMII Riser for FM1_DTSEC1:%x\n",
 253                       CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR);
 254                 fm_info_set_phy_address(FM1_DTSEC1,
 255                                 CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR);
 256                 fm_info_set_phy_address(FM1_DTSEC2,
 257                                 CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR);
 258                 fm_info_set_phy_address(FM1_DTSEC3,
 259                                 CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR);
 260                 break;
 261         case 0xb1:
 262         case 0xb2:
 263         case 0x8c:
 264         case 0x8d:
 265                 debug("Set phy addresses on SGMII Riser for FM1_DTSEC1:%x\n",
 266                       CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR);
 267                 fm_info_set_phy_address(FM1_DTSEC3,
 268                                 CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR);
 269                 fm_info_set_phy_address(FM1_DTSEC4,
 270                                 CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR);
 271                 /*
 272                  * XFI does not need a PHY to work, but to make U-boot
 273                  * happy, assign a fake PHY address for a XFI port.
 274                  */
 275                 fm_info_set_phy_address(FM1_10GEC1, 0);
 276                 fm_info_set_phy_address(FM1_10GEC2, 1);
 277                 break;
 278         case 0x98:
 279                 /* XAUI in Slot1 and Slot2 */
 280                 debug("Set phy address of AMC2PEX-2S for FM1_10GEC1:%x\n",
 281                       CONFIG_SYS_FM1_10GEC1_PHY_ADDR);
 282                 fm_info_set_phy_address(FM1_10GEC1,
 283                                         CONFIG_SYS_FM1_10GEC1_PHY_ADDR);
 284                 debug("Set phy address of AMC2PEX-2S for FM1_10GEC2:%x\n",
 285                       CONFIG_SYS_FM1_10GEC2_PHY_ADDR);
 286                 fm_info_set_phy_address(FM1_10GEC2,
 287                                         CONFIG_SYS_FM1_10GEC2_PHY_ADDR);
 288                 break;
 289         case 0x9E:
 290                 /* XAUI in Slot2 */
 291                 debug("Sett phy address of AMC2PEX-2S for FM1_10GEC2:%x\n",
 292                       CONFIG_SYS_FM1_10GEC2_PHY_ADDR);
 293                 fm_info_set_phy_address(FM1_10GEC2,
 294                                         CONFIG_SYS_FM1_10GEC2_PHY_ADDR);
 295                 break;
 296         default:
 297                 printf("Fman:  Unsupported SerDes2 Protocol 0x%02x\n",
 298                                 serdes2_prtcl);
 299                 break;
 300         }
 301
 302         /*set PHY address for QSGMII Riser Card on slot2*/
 303         bus = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME);
 304         qsgmii = is_qsgmii_riser_card(bus, PHY_BASE_ADDR, PORT_NUM, REGNUM);
 305
 306         if (qsgmii) {
 307                 switch (serdes2_prtcl) {
 308                 case 0xb2:
 309                 case 0x8d:
 310                         fm_info_set_phy_address(FM1_DTSEC3, PHY_BASE_ADDR);
 311                         fm_info_set_phy_address(FM1_DTSEC4, PHY_BASE_ADDR + 1);
 312                         break;
 313                 default:
 314                         break;
 315                 }
 316         }
 317
 318         for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
 319                 int idx = i - FM1_DTSEC1;
 320
 321                 switch (fm_info_get_enet_if(i)) {
 322                 case PHY_INTERFACE_MODE_SGMII:
 323                         fm_info_set_mdio(i,
 324                                 miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME));
 325                         break;
 326                 case PHY_INTERFACE_MODE_NONE:
 327                         fm_info_set_phy_address(i, 0);
 328                         break;
 329                 default:
 330                         printf("Fman1: DTSEC%u set to unknown interface %i\n",
 331                                         idx + 1, fm_info_get_enet_if(i));
 332                         fm_info_set_phy_address(i, 0);
 333                         break;
 334                 }
 335         }
 336
 337         for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) {
 338                 int idx = i - FM1_10GEC1;
 339
 340                 switch (fm_info_get_enet_if(i)) {
 341                 case PHY_INTERFACE_MODE_XGMII:
 342                         fm_info_set_mdio(i,
 343                                          miiphy_get_dev_by_name
 344                                          (DEFAULT_FM_TGEC_MDIO_NAME));
 345                         break;
 346                 case PHY_INTERFACE_MODE_NONE:
 347                         fm_info_set_phy_address(i, 0);
 348                         break;
 349                 default:
 350                         printf("Fman1: TGEC%u set to unknown interface %i\n",
 351                                idx + 1, fm_info_get_enet_if(i));
 352                         fm_info_set_phy_address(i, 0);
 353                         break;
 354                 }
 355         }
 356
 357         cpu_eth_init(bis);
 358 #endif
 359
 360         return pci_eth_init(bis);
 361 }
 362
 363 void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
 364                               enum fm_port port, int offset)
 365 {
 366         int phy;
 367         char alias[32];
 368         struct fixed_link f_link;
 369         ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 370         u32 prtcl2 = in_be32(&gur->rcwsr[4]) & FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
 371
 372         prtcl2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
 373
 374         if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII) {
 375                 phy = fm_info_get_phy_address(port);
 376
 377                 sprintf(alias, "phy_sgmii_%x", phy);
 378                 fdt_set_phy_handle(fdt, compat, addr, alias);
 379                 fdt_status_okay_by_alias(fdt, alias);
 380         } else if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_XGMII) {
 381                 /* check if it's XFI interface for 10g */
 382                 switch (prtcl2) {
 383                 case 0x80:
 384                 case 0x81:
 385                 case 0x82:
 386                 case 0x83:
 387                 case 0x84:
 388                 case 0x85:
 389                 case 0x86:
 390                 case 0x87:
 391                 case 0x88:
 392                 case 0x89:
 393                 case 0x8a:
 394                 case 0x8b:
 395                 case 0x8c:
 396                 case 0x8d:
 397                 case 0x8e:
 398                 case 0xb1:
 399                 case 0xb2:
 400                         f_link.phy_id = port;
 401                         f_link.duplex = 1;
 402                         f_link.link_speed = 10000;
 403                         f_link.pause = 0;
 404                         f_link.asym_pause = 0;
 405
 406                         fdt_delprop(fdt, offset, "phy-handle");
 407                         fdt_setprop(fdt, offset, "fixed-link", &f_link,
 408                                     sizeof(f_link));
 409                         break;
 410                 case 0x98: /* XAUI interface */
 411                         sprintf(alias, "phy_xaui_slot1");
 412                         fdt_status_okay_by_alias(fdt, alias);
 413
 414                         sprintf(alias, "phy_xaui_slot2");
 415                         fdt_status_okay_by_alias(fdt, alias);
 416                         break;
 417                 case 0x9e: /* XAUI interface */
 418                 case 0x9a:
 419                 case 0x93:
 420                 case 0x91:
 421                         sprintf(alias, "phy_xaui_slot1");
 422                         fdt_status_okay_by_alias(fdt, alias);
 423                         break;
 424                 case 0x97: /* XAUI interface */
 425                 case 0xc3:
 426                         sprintf(alias, "phy_xaui_slot2");
 427                         fdt_status_okay_by_alias(fdt, alias);
 428                         break;
 429                 default:
 430                         break;
 431                 }
 432         }
 433 }
 434
 435 /*
 436  * Set status to disabled for unused ethernet node
 437  */
 438 void fdt_fixup_board_enet(void *fdt)
 439 {
 440         int i;
 441         char alias[32];
 442
 443         for (i = FM1_DTSEC1; i <= FM1_10GEC2; i++) {
 444                 switch (fm_info_get_enet_if(i)) {
 445                 case PHY_INTERFACE_MODE_NONE:
 446                         sprintf(alias, "ethernet%u", i);
 447                         fdt_status_disabled_by_alias(fdt, alias);
 448                         break;
 449                 default:
 450                         break;
 451                 }
 452         }
 453 }