board/freescale/mpc8349itx/mpc8349itx.c

   1 /*
   2  * Copyright (C) Freescale Semiconductor, Inc. 2006.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #include <common.h>
   8 #include <ioports.h>
   9 #include <mpc83xx.h>
  10 #include <i2c.h>
  11 #include <miiphy.h>
  12 #include <vsc7385.h>
  13 #ifdef CONFIG_PCI
  14 #include <asm/mpc8349_pci.h>
  15 #include <pci.h>
  16 #endif
  17 #include <spd_sdram.h>
  18 #include <asm/mmu.h>
  19 #if defined(CONFIG_OF_LIBFDT)
  20 #include <libfdt.h>
  21 #endif
  22
  23 #ifndef CONFIG_SPD_EEPROM
  24 /*************************************************************************
  25  *  fixed sdram init -- doesn't use serial presence detect.
  26  ************************************************************************/
  27 int fixed_sdram(void)
  28 {
  29         volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
  30         /* The size of RAM, in bytes */
  31         u32 ddr_size = CONFIG_SYS_DDR_SIZE << 20;
  32         u32 ddr_size_log2 = __ilog2(ddr_size);
  33
  34         im->sysconf.ddrlaw[0].ar =
  35             LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
  36         im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
  37
  38 #if ((CONFIG_SYS_DDR_SDRAM_BASE & 0x00FFFFFF) != 0)
  39 #warning Chip select bounds is only configurable in 16MB increments
  40 #endif
  41         im->ddr.csbnds[0].csbnds =
  42                 ((CONFIG_SYS_DDR_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) |
  43                 (((CONFIG_SYS_DDR_SDRAM_BASE + ddr_size - 1) >>
  44                                 CSBNDS_EA_SHIFT) & CSBNDS_EA);
  45         im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
  46
  47         /* Only one CS for DDR */
  48         im->ddr.cs_config[1] = 0;
  49         im->ddr.cs_config[2] = 0;
  50         im->ddr.cs_config[3] = 0;
  51
  52         debug("cs0_bnds = 0x%08x\n", im->ddr.csbnds[0].csbnds);
  53         debug("cs0_config = 0x%08x\n", im->ddr.cs_config[0]);
  54
  55         debug("DDR:bar=0x%08x\n", im->sysconf.ddrlaw[0].bar);
  56         debug("DDR:ar=0x%08x\n", im->sysconf.ddrlaw[0].ar);
  57
  58         im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
  59         im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;/* Was "2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT" */
  60         im->ddr.sdram_cfg = SDRAM_CFG_SREN | SDRAM_CFG_SDRAM_TYPE_DDR1;
  61         im->ddr.sdram_mode =
  62             (0x0000 << SDRAM_MODE_ESD_SHIFT) | (0x0032 << SDRAM_MODE_SD_SHIFT);
  63         im->ddr.sdram_interval =
  64             (0x0410 << SDRAM_INTERVAL_REFINT_SHIFT) | (0x0100 <<
  65                                                        SDRAM_INTERVAL_BSTOPRE_SHIFT);
  66         im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL;
  67
  68         udelay(200);
  69
  70         im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
  71
  72         debug("DDR:timing_cfg_1=0x%08x\n", im->ddr.timing_cfg_1);
  73         debug("DDR:timing_cfg_2=0x%08x\n", im->ddr.timing_cfg_2);
  74         debug("DDR:sdram_mode=0x%08x\n", im->ddr.sdram_mode);
  75         debug("DDR:sdram_interval=0x%08x\n", im->ddr.sdram_interval);
  76         debug("DDR:sdram_cfg=0x%08x\n", im->ddr.sdram_cfg);
  77
  78         return CONFIG_SYS_DDR_SIZE;
  79 }
  80 #endif
  81
  82 #ifdef CONFIG_PCI
  83 /*
  84  * Initialize PCI Devices, report devices found
  85  */
  86 #ifndef CONFIG_PCI_PNP
  87 static struct pci_config_table pci_mpc83xxmitx_config_table[] = {
  88         {
  89          PCI_ANY_ID,
  90          PCI_ANY_ID,
  91          PCI_ANY_ID,
  92          PCI_ANY_ID,
  93          0x0f,
  94          PCI_ANY_ID,
  95          pci_cfgfunc_config_device,
  96          {
  97           PCI_ENET0_IOADDR,
  98           PCI_ENET0_MEMADDR,
  99           PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}
 100          },
 101         {}
 102 }
 103 #endif
 104
 105 volatile static struct pci_controller hose[] = {
 106         {
 107 #ifndef CONFIG_PCI_PNP
 108               config_table:pci_mpc83xxmitx_config_table,
 109 #endif
 110          },
 111         {
 112 #ifndef CONFIG_PCI_PNP
 113               config_table:pci_mpc83xxmitx_config_table,
 114 #endif
 115          }
 116 };
 117 #endif                          /* CONFIG_PCI */
 118
 119 phys_size_t initdram(int board_type)
 120 {
 121         volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 122         u32 msize = 0;
 123 #ifdef CONFIG_DDR_ECC
 124         volatile ddr83xx_t *ddr = &im->ddr;
 125 #endif
 126
 127         if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
 128                 return -1;
 129
 130         /* DDR SDRAM - Main SODIMM */
 131         im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
 132 #ifdef CONFIG_SPD_EEPROM
 133         msize = spd_sdram();
 134 #else
 135         msize = fixed_sdram();
 136 #endif
 137
 138 #ifdef CONFIG_DDR_ECC
 139         if (ddr->sdram_cfg & SDRAM_CFG_ECC_EN)
 140                 /* Unlike every other board, on the 83xx spd_sdram() returns
 141                    megabytes instead of just bytes.  That's why we need to
 142                    multiple by 1MB when calling ddr_enable_ecc(). */
 143                 ddr_enable_ecc(msize * 1048576);
 144 #endif
 145
 146         /* return total bus RAM size(bytes) */
 147         return msize * 1024 * 1024;
 148 }
 149
 150 int checkboard(void)
 151 {
 152 #ifdef CONFIG_MPC8349ITX
 153         puts("Board: Freescale MPC8349E-mITX\n");
 154 #else
 155         puts("Board: Freescale MPC8349E-mITX-GP\n");
 156 #endif
 157
 158         return 0;
 159 }
 160
 161 /*
 162  * Implement a work-around for a hardware problem with compact
 163  * flash.
 164  *
 165  * Program the UPM if compact flash is enabled.
 166  */
 167 int misc_init_f(void)
 168 {
 169 #ifdef CONFIG_VSC7385_ENET
 170         volatile u32 *vsc7385_cpuctrl;
 171
 172         /* 0x1c0c0 is the VSC7385 CPU Control (CPUCTRL) Register.  The power up
 173            default of VSC7385 L1_IRQ and L2_IRQ requests are active high.  That
 174            means it is 0 when the IRQ is not active.  This makes the wire-AND
 175            logic always assert IRQ7 to CPU even if there is no request from the
 176            switch.  Since the compact flash and the switch share the same IRQ,
 177            the Linux kernel will think that the compact flash is requesting irq
 178            and get stuck when it tries to clear the IRQ.  Thus we need to set
 179            the L2_IRQ0 and L2_IRQ1 to active low.
 180
 181            The following code sets the L1_IRQ and L2_IRQ polarity to active low.
 182            Without this code, compact flash will not work in Linux because
 183            unlike U-Boot, Linux uses the IRQ, so this code is necessary if we
 184            don't enable compact flash for U-Boot.
 185          */
 186
 187         vsc7385_cpuctrl = (volatile u32 *)(CONFIG_SYS_VSC7385_BASE + 0x1c0c0);
 188         *vsc7385_cpuctrl |= 0x0c;
 189 #endif
 190
 191 #ifdef CONFIG_COMPACT_FLASH
 192         /* UPM Table Configuration Code */
 193         static uint UPMATable[] = {
 194                 0xcffffc00, 0x0fffff00, 0x0fafff00, 0x0fafff00,
 195                 0x0faffd00, 0x0faffc04, 0x0ffffc00, 0x3ffffc01,
 196                 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
 197                 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
 198                 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfff7fc00,
 199                 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
 200                 0xcffffc00, 0x0fffff00, 0x0ff3ff00, 0x0ff3ff00,
 201                 0x0ff3fe00, 0x0ffffc00, 0x3ffffc05, 0xfffffc00,
 202                 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
 203                 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
 204                 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
 205                 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
 206                 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
 207                 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
 208                 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
 209                 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01
 210         };
 211         volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 212
 213         set_lbc_br(3, CONFIG_SYS_BR3_PRELIM);
 214         set_lbc_or(3, CONFIG_SYS_OR3_PRELIM);
 215
 216         /* Program the MAMR. RFEN=0, OP=00, UWPL=1, AM=000, DS=01, G0CL=000,
 217            GPL4=0, RLF=0001, WLF=0001, TLF=0001, MAD=000000
 218          */
 219         immap->im_lbc.mamr = 0x08404440;
 220
 221         upmconfig(0, UPMATable, sizeof(UPMATable) / sizeof(UPMATable[0]));
 222
 223         puts("UPMA:  Configured for compact flash\n");
 224 #endif
 225
 226         return 0;
 227 }
 228
 229 /*
 230  * Miscellaneous late-boot configurations
 231  *
 232  * Make sure the EEPROM has the HRCW correctly programmed.
 233  * Make sure the RTC is correctly programmed.
 234  *
 235  * The MPC8349E-mITX can be configured to load the HRCW from
 236  * EEPROM instead of flash.  This is controlled via jumpers
 237  * LGPL0, 1, and 3.  Normally, these jumpers are set to 000 (all
 238  * jumpered), but if they're set to 001 or 010, then the HRCW is
 239  * read from the "I2C EEPROM".
 240  *
 241  * This function makes sure that the I2C EEPROM is programmed
 242  * correctly.
 243  *
 244  * If a VSC7385 microcode image is present, then upload it.
 245  */
 246 int misc_init_r(void)
 247 {
 248         int rc = 0;
 249
 250 #if defined(CONFIG_SYS_I2C)
 251         unsigned int orig_bus = i2c_get_bus_num();
 252         u8 i2c_data;
 253
 254 #ifdef CONFIG_SYS_I2C_RTC_ADDR
 255         u8 ds1339_data[17];
 256 #endif
 257
 258 #ifdef CONFIG_SYS_I2C_EEPROM_ADDR
 259         static u8 eeprom_data[] =       /* HRCW data */
 260         {
 261                 0xAA, 0x55, 0xAA,       /* Preamble */
 262                 0x7C,                   /* ACS=0, BYTE_EN=1111, CONT=1 */
 263                 0x02, 0x40,             /* RCWL ADDR=0x0_0900 */
 264                 (CONFIG_SYS_HRCW_LOW >> 24) & 0xFF,
 265                 (CONFIG_SYS_HRCW_LOW >> 16) & 0xFF,
 266                 (CONFIG_SYS_HRCW_LOW >> 8) & 0xFF,
 267                 CONFIG_SYS_HRCW_LOW & 0xFF,
 268                 0x7C,                   /* ACS=0, BYTE_EN=1111, CONT=1 */
 269                 0x02, 0x41,             /* RCWH ADDR=0x0_0904 */
 270                 (CONFIG_SYS_HRCW_HIGH >> 24) & 0xFF,
 271                 (CONFIG_SYS_HRCW_HIGH >> 16) & 0xFF,
 272                 (CONFIG_SYS_HRCW_HIGH >> 8) & 0xFF,
 273                 CONFIG_SYS_HRCW_HIGH & 0xFF
 274         };
 275
 276         u8 data[sizeof(eeprom_data)];
 277 #endif
 278
 279         printf("Board revision: ");
 280         i2c_set_bus_num(1);
 281         if (i2c_read(CONFIG_SYS_I2C_8574A_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0)
 282                 printf("%u.%u (PCF8475A)\n", (i2c_data & 0x02) >> 1, i2c_data & 0x01);
 283         else if (i2c_read(CONFIG_SYS_I2C_8574_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0)
 284                 printf("%u.%u (PCF8475)\n",  (i2c_data & 0x02) >> 1, i2c_data & 0x01);
 285         else {
 286                 printf("Unknown\n");
 287                 rc = 1;
 288         }
 289
 290 #ifdef CONFIG_SYS_I2C_EEPROM_ADDR
 291         i2c_set_bus_num(0);
 292
 293         if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, data, sizeof(data)) == 0) {
 294                 if (memcmp(data, eeprom_data, sizeof(data)) != 0) {
 295                         if (i2c_write
 296                             (CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, eeprom_data,
 297                              sizeof(eeprom_data)) != 0) {
 298                                 puts("Failure writing the HRCW to EEPROM via I2C.\n");
 299                                 rc = 1;
 300                         }
 301                 }
 302         } else {
 303                 puts("Failure reading the HRCW from EEPROM via I2C.\n");
 304                 rc = 1;
 305         }
 306 #endif
 307
 308 #ifdef CONFIG_SYS_I2C_RTC_ADDR
 309         i2c_set_bus_num(1);
 310
 311         if (i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, ds1339_data, sizeof(ds1339_data))
 312             == 0) {
 313
 314                 /* Work-around for MPC8349E-mITX bug #13601.
 315                    If the RTC does not contain valid register values, the DS1339
 316                    Linux driver will not work.
 317                  */
 318
 319                 /* Make sure status register bits 6-2 are zero */
 320                 ds1339_data[0x0f] &= ~0x7c;
 321
 322                 /* Check for a valid day register value */
 323                 ds1339_data[0x03] &= ~0xf8;
 324                 if (ds1339_data[0x03] == 0) {
 325                         ds1339_data[0x03] = 1;
 326                 }
 327
 328                 /* Check for a valid date register value */
 329                 ds1339_data[0x04] &= ~0xc0;
 330                 if ((ds1339_data[0x04] == 0) ||
 331                     ((ds1339_data[0x04] & 0x0f) > 9) ||
 332                     (ds1339_data[0x04] >= 0x32)) {
 333                         ds1339_data[0x04] = 1;
 334                 }
 335
 336                 /* Check for a valid month register value */
 337                 ds1339_data[0x05] &= ~0x60;
 338
 339                 if ((ds1339_data[0x05] == 0) ||
 340                     ((ds1339_data[0x05] & 0x0f) > 9) ||
 341                     ((ds1339_data[0x05] >= 0x13)
 342                      && (ds1339_data[0x05] <= 0x19))) {
 343                         ds1339_data[0x05] = 1;
 344                 }
 345
 346                 /* Enable Oscillator and rate select */
 347                 ds1339_data[0x0e] = 0x1c;
 348
 349                 /* Work-around for MPC8349E-mITX bug #13330.
 350                    Ensure that the RTC control register contains the value 0x1c.
 351                    This affects SATA performance.
 352                  */
 353
 354                 if (i2c_write
 355                     (CONFIG_SYS_I2C_RTC_ADDR, 0, 1, ds1339_data,
 356                      sizeof(ds1339_data))) {
 357                         puts("Failure writing to the RTC via I2C.\n");
 358                         rc = 1;
 359                 }
 360         } else {
 361                 puts("Failure reading from the RTC via I2C.\n");
 362                 rc = 1;
 363         }
 364 #endif
 365
 366         i2c_set_bus_num(orig_bus);
 367 #endif
 368
 369 #ifdef CONFIG_VSC7385_IMAGE
 370         if (vsc7385_upload_firmware((void *) CONFIG_VSC7385_IMAGE,
 371                 CONFIG_VSC7385_IMAGE_SIZE)) {
 372                 puts("Failure uploading VSC7385 microcode.\n");
 373                 rc = 1;
 374         }
 375 #endif
 376
 377         return rc;
 378 }
 379
 380 #if defined(CONFIG_OF_BOARD_SETUP)
 381 void ft_board_setup(void *blob, bd_t *bd)
 382 {
 383         ft_cpu_setup(blob, bd);
 384 #ifdef CONFIG_PCI
 385         ft_pci_setup(blob, bd);
 386 #endif
 387 }
 388 #endif