]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - board/freescale/t208xrdb/cpld.h
Merge branch 'u-boot/master'
[karo-tx-uboot.git] / board / freescale / t208xrdb / cpld.h
1 /*
2  * Copyright 2014 Freescale Semiconductor
3  *
4  * SPDX-License-Identifier:     GPL-2.0+
5  */
6
7 /*
8  * CPLD register set of T2080RDB board-specific.
9  */
10 struct cpld_data {
11         u8 chip_id1;            /* 0x00 - Chip ID1 register */
12         u8 chip_id2;            /* 0x01 - Chip ID2 register */
13         u8 hw_ver;              /* 0x02 - Hardware Revision Register */
14         u8 sw_ver;              /* 0x03 - Software Revision register */
15         u8 res0[12];            /* 0x04 - 0x0F - not used */
16         u8 reset_ctl;           /* 0x10 - Reset control Register */
17         u8 flash_csr;           /* 0x11 - Flash control and status register */
18         u8 thermal_csr;         /* 0x12 - Thermal control and status register */
19         u8 led_csr;             /* 0x13 - LED control and status register */
20         u8 sfp_csr;             /* 0x14 - SFP+ control and status register */
21         u8 misc_csr;            /* 0x15 - Misc control and status register */
22         u8 boot_or;             /* 0x16 - Boot config override register */
23         u8 boot_cfg1;           /* 0x17 - Boot configuration register 1 */
24         u8 boot_cfg2;           /* 0x18 - Boot configuration register 2 */
25 } cpld_data_t;
26
27 u8 cpld_read(unsigned int reg);
28 void cpld_write(unsigned int reg, u8 value);
29
30 #define CPLD_READ(reg) cpld_read(offsetof(struct cpld_data, reg))
31 #define CPLD_WRITE(reg, value)  \
32         cpld_write(offsetof(struct cpld_data, reg), value)
33
34 /* CPLD on IFC */
35 #define CPLD_LBMAP_MASK         0x3F
36 #define CPLD_BANK_SEL_MASK      0x07
37 #define CPLD_BANK_OVERRIDE      0x40
38 #define CPLD_LBMAP_ALTBANK      0x44 /* BANK OR | BANK 4 */
39 #define CPLD_LBMAP_DFLTBANK     0x40 /* BANK OR | BANK 0 */
40 #define CPLD_LBMAP_RESET        0xFF
41 #define CPLD_LBMAP_SHIFT        0x03
42 #define CPLD_BOOT_SEL           0x80