]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - board/g2000/strataflash.c
Coding Style cleanup: remove trailing white space
[karo-tx-uboot.git] / board / g2000 / strataflash.c
1 /*
2  * (C) Copyright 2002
3  * Brad Kemp, Seranoa Networks, Brad.Kemp@seranoa.com
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 #include <common.h>
9 #include <asm/processor.h>
10
11 #undef  DEBUG_FLASH
12 /*
13  * This file implements a Common Flash Interface (CFI) driver for ppcboot.
14  * The width of the port and the width of the chips are determined at initialization.
15  * These widths are used to calculate the address for access CFI data structures.
16  * It has been tested on an Intel Strataflash implementation.
17  *
18  * References
19  * JEDEC Standard JESD68 - Common Flash Interface (CFI)
20  * JEDEC Standard JEP137-A Common Flash Interface (CFI) ID Codes
21  * Intel Application Note 646 Common Flash Interface (CFI) and Command Sets
22  * Intel 290667-008 3 Volt Intel StrataFlash Memory datasheet
23  *
24  * TODO
25  * Use Primary Extended Query table (PRI) and Alternate Algorithm Query Table (ALT) to determine if protection is available
26  * Add support for other command sets Use the PRI and ALT to determine command set
27  * Verify erase and program timeouts.
28  */
29
30 #define FLASH_CMD_CFI                   0x98
31 #define FLASH_CMD_READ_ID               0x90
32 #define FLASH_CMD_RESET                 0xff
33 #define FLASH_CMD_BLOCK_ERASE           0x20
34 #define FLASH_CMD_ERASE_CONFIRM         0xD0
35 #define FLASH_CMD_WRITE                 0x40
36 #define FLASH_CMD_PROTECT               0x60
37 #define FLASH_CMD_PROTECT_SET           0x01
38 #define FLASH_CMD_PROTECT_CLEAR         0xD0
39 #define FLASH_CMD_CLEAR_STATUS          0x50
40 #define FLASH_CMD_WRITE_TO_BUFFER       0xE8
41 #define FLASH_CMD_WRITE_BUFFER_CONFIRM  0xD0
42
43 #define FLASH_STATUS_DONE               0x80
44 #define FLASH_STATUS_ESS                0x40
45 #define FLASH_STATUS_ECLBS              0x20
46 #define FLASH_STATUS_PSLBS              0x10
47 #define FLASH_STATUS_VPENS              0x08
48 #define FLASH_STATUS_PSS                0x04
49 #define FLASH_STATUS_DPS                0x02
50 #define FLASH_STATUS_R                  0x01
51 #define FLASH_STATUS_PROTECT            0x01
52
53 #define FLASH_OFFSET_CFI                0x55
54 #define FLASH_OFFSET_CFI_RESP           0x10
55 #define FLASH_OFFSET_WTOUT              0x1F
56 #define FLASH_OFFSET_WBTOUT             0x20
57 #define FLASH_OFFSET_ETOUT              0x21
58 #define FLASH_OFFSET_CETOUT             0x22
59 #define FLASH_OFFSET_WMAX_TOUT          0x23
60 #define FLASH_OFFSET_WBMAX_TOUT         0x24
61 #define FLASH_OFFSET_EMAX_TOUT          0x25
62 #define FLASH_OFFSET_CEMAX_TOUT         0x26
63 #define FLASH_OFFSET_SIZE               0x27
64 #define FLASH_OFFSET_INTERFACE          0x28
65 #define FLASH_OFFSET_BUFFER_SIZE        0x2A
66 #define FLASH_OFFSET_NUM_ERASE_REGIONS  0x2C
67 #define FLASH_OFFSET_ERASE_REGIONS      0x2D
68 #define FLASH_OFFSET_PROTECT            0x02
69 #define FLASH_OFFSET_USER_PROTECTION    0x85
70 #define FLASH_OFFSET_INTEL_PROTECTION   0x81
71
72 #define FLASH_MAN_CFI                   0x01000000
73
74 typedef union {
75         unsigned char c;
76         unsigned short w;
77         unsigned long l;
78 } cfiword_t;
79
80 typedef union {
81         unsigned char * cp;
82         unsigned short *wp;
83         unsigned long *lp;
84 } cfiptr_t;
85
86 #define NUM_ERASE_REGIONS 4
87
88 flash_info_t    flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
89
90 /*-----------------------------------------------------------------------
91  * Functions
92  */
93
94 static void flash_add_byte(flash_info_t *info, cfiword_t * cword, uchar c);
95 static void flash_make_cmd(flash_info_t * info, uchar cmd, void * cmdbuf);
96 static void flash_write_cmd(flash_info_t * info, int sect, uchar offset, uchar cmd);
97 static int flash_isequal(flash_info_t * info, int sect, uchar offset, uchar cmd);
98 static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd);
99 static int flash_detect_cfi(flash_info_t * info);
100 static ulong flash_get_size (ulong base, int banknum);
101 static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword);
102 static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt);
103 #ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
104 static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len);
105 #endif
106 /*-----------------------------------------------------------------------
107  * create an address based on the offset and the port width
108  */
109 inline uchar * flash_make_addr(flash_info_t * info, int sect, int offset)
110 {
111         return ((uchar *)(info->start[sect] + (offset * info->portwidth)));
112 }
113 /*-----------------------------------------------------------------------
114  * read a character at a port width address
115  */
116 inline uchar flash_read_uchar(flash_info_t * info, uchar offset)
117 {
118         uchar *cp;
119         cp = flash_make_addr(info, 0, offset);
120         return (cp[info->portwidth - 1]);
121 }
122
123 /*-----------------------------------------------------------------------
124  * read a short word by swapping for ppc format.
125  */
126 ushort flash_read_ushort(flash_info_t * info, int sect,  uchar offset)
127 {
128     uchar * addr;
129
130     addr = flash_make_addr(info, sect, offset);
131     return ((addr[(2*info->portwidth) - 1] << 8) | addr[info->portwidth - 1]);
132
133 }
134
135 /*-----------------------------------------------------------------------
136  * read a long word by picking the least significant byte of each maiximum
137  * port size word. Swap for ppc format.
138  */
139 ulong flash_read_long(flash_info_t * info, int sect,  uchar offset)
140 {
141     uchar * addr;
142
143     addr = flash_make_addr(info, sect, offset);
144     return ( (addr[(2*info->portwidth) - 1] << 24 ) | (addr[(info->portwidth) -1] << 16) |
145             (addr[(4*info->portwidth) - 1] << 8) | addr[(3*info->portwidth) - 1]);
146
147 }
148
149 /*-----------------------------------------------------------------------
150  */
151 unsigned long flash_init (void)
152 {
153         unsigned long size;
154         int i;
155         unsigned long  address;
156
157
158         /* The flash is positioned back to back, with the demultiplexing of the chip
159          * based on the A24 address line.
160          *
161          */
162
163         address = CONFIG_SYS_FLASH_BASE;
164         size = 0;
165
166         /* Init: no FLASHes known */
167         for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
168                 flash_info[i].flash_id = FLASH_UNKNOWN;
169                 size += flash_info[i].size = flash_get_size(address, i);
170                 address += CONFIG_SYS_FLASH_INCREMENT;
171                 if (flash_info[0].flash_id == FLASH_UNKNOWN) {
172                         printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",i,
173                                 flash_info[0].size, flash_info[i].size<<20);
174                 }
175         }
176
177 #if 0 /* test-only */
178         /* Monitor protection ON by default */
179 #if (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE)
180         for(i=0; flash_info[0].start[i] < CONFIG_SYS_MONITOR_BASE+CONFIG_SYS_MONITOR_LEN-1; i++)
181                 (void)flash_real_protect(&flash_info[0], i, 1);
182 #endif
183 #else
184         /* monitor protection ON by default */
185         flash_protect (FLAG_PROTECT_SET,
186                        - CONFIG_SYS_MONITOR_LEN,
187                        - 1, &flash_info[1]);
188 #endif
189
190         return (size);
191 }
192
193 /*-----------------------------------------------------------------------
194  */
195 int flash_erase (flash_info_t *info, int s_first, int s_last)
196 {
197         int rcode = 0;
198         int prot;
199         int sect;
200
201         if( info->flash_id != FLASH_MAN_CFI) {
202                 printf ("Can't erase unknown flash type - aborted\n");
203                 return 1;
204         }
205         if ((s_first < 0) || (s_first > s_last)) {
206                 printf ("- no sectors to erase\n");
207                 return 1;
208         }
209
210         prot = 0;
211         for (sect=s_first; sect<=s_last; ++sect) {
212                 if (info->protect[sect]) {
213                         prot++;
214                 }
215         }
216         if (prot) {
217                 printf ("- Warning: %d protected sectors will not be erased!\n",
218                         prot);
219         } else {
220                 printf ("\n");
221         }
222
223
224         for (sect = s_first; sect<=s_last; sect++) {
225                 if (info->protect[sect] == 0) { /* not protected */
226                         flash_write_cmd(info, sect, 0, FLASH_CMD_CLEAR_STATUS);
227                         flash_write_cmd(info, sect, 0, FLASH_CMD_BLOCK_ERASE);
228                         flash_write_cmd(info, sect, 0, FLASH_CMD_ERASE_CONFIRM);
229
230                         if(flash_full_status_check(info, sect, info->erase_blk_tout, "erase")) {
231                                 rcode = 1;
232                         } else
233                                 printf(".");
234                 }
235         }
236         printf (" done\n");
237         return rcode;
238 }
239
240 /*-----------------------------------------------------------------------
241  */
242 void flash_print_info  (flash_info_t *info)
243 {
244         int i;
245
246         if (info->flash_id != FLASH_MAN_CFI) {
247                 printf ("missing or unknown FLASH type\n");
248                 return;
249         }
250
251         printf("CFI conformant FLASH (%d x %d)",
252                (info->portwidth  << 3 ), (info->chipwidth  << 3 ));
253         printf ("  Size: %ld MB in %d Sectors\n",
254                 info->size >> 20, info->sector_count);
255         printf(" Erase timeout %ld ms, write timeout %ld ms, buffer write timeout %ld ms, buffer size %d\n",
256                info->erase_blk_tout, info->write_tout, info->buffer_write_tout, info->buffer_size);
257
258         printf ("  Sector Start Addresses:");
259         for (i=0; i<info->sector_count; ++i) {
260 #ifdef CONFIG_SYS_FLASH_EMPTY_INFO
261                 int k;
262                 int size;
263                 int erased;
264                 volatile unsigned long *flash;
265
266                 /*
267                  * Check if whole sector is erased
268                  */
269                 if (i != (info->sector_count-1))
270                   size = info->start[i+1] - info->start[i];
271                 else
272                   size = info->start[0] + info->size - info->start[i];
273                 erased = 1;
274                 flash = (volatile unsigned long *)info->start[i];
275                 size = size >> 2;        /* divide by 4 for longword access */
276                 for (k=0; k<size; k++)
277                   {
278                     if (*flash++ != 0xffffffff)
279                       {
280                         erased = 0;
281                         break;
282                       }
283                   }
284
285                 if ((i % 5) == 0)
286                         printf ("\n   ");
287                 /* print empty and read-only info */
288                 printf (" %08lX%s%s",
289                         info->start[i],
290                         erased ? " E" : "  ",
291                         info->protect[i] ? "RO " : "   ");
292 #else
293                 if ((i % 5) == 0)
294                         printf ("\n   ");
295                 printf (" %08lX%s",
296                         info->start[i],
297                         info->protect[i] ? " (RO)" : "     ");
298 #endif
299         }
300         printf ("\n");
301         return;
302 }
303
304 /*-----------------------------------------------------------------------
305  * Copy memory to flash, returns:
306  * 0 - OK
307  * 1 - write timeout
308  * 2 - Flash not erased
309  */
310 int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
311 {
312         ulong wp;
313         ulong cp;
314         int aln;
315         cfiword_t cword;
316         int i, rc;
317
318         /* get lower aligned address */
319         wp = (addr & ~(info->portwidth - 1));
320
321         /* handle unaligned start */
322         if((aln = addr - wp) != 0) {
323                 cword.l = 0;
324                 cp = wp;
325                 for(i=0;i<aln; ++i, ++cp)
326                         flash_add_byte(info, &cword, (*(uchar *)cp));
327
328                 for(; (i< info->portwidth) && (cnt > 0) ; i++) {
329                         flash_add_byte(info, &cword, *src++);
330                         cnt--;
331                         cp++;
332                 }
333                 for(; (cnt == 0) && (i < info->portwidth); ++i, ++cp)
334                         flash_add_byte(info, &cword, (*(uchar *)cp));
335                 if((rc = flash_write_cfiword(info, wp, cword)) != 0)
336                         return rc;
337                 wp = cp;
338         }
339
340 #ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
341         while(cnt >= info->portwidth) {
342                 i = info->buffer_size > cnt? cnt: info->buffer_size;
343                 if((rc = flash_write_cfibuffer(info, wp, src,i)) != ERR_OK)
344                         return rc;
345                 wp += i;
346                 src += i;
347                 cnt -=i;
348         }
349 #else
350         /* handle the aligned part */
351         while(cnt >= info->portwidth) {
352                 cword.l = 0;
353                 for(i = 0; i < info->portwidth; i++) {
354                         flash_add_byte(info, &cword, *src++);
355                 }
356                 if((rc = flash_write_cfiword(info, wp, cword)) != 0)
357                         return rc;
358                 wp += info->portwidth;
359                 cnt -= info->portwidth;
360         }
361 #endif /* CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
362         if (cnt == 0) {
363                 return (0);
364         }
365
366         /*
367          * handle unaligned tail bytes
368          */
369         cword.l = 0;
370         for (i=0, cp=wp; (i<info->portwidth) && (cnt>0); ++i, ++cp) {
371                 flash_add_byte(info, &cword, *src++);
372                 --cnt;
373         }
374         for (; i<info->portwidth; ++i, ++cp) {
375                 flash_add_byte(info, & cword, (*(uchar *)cp));
376         }
377
378         return flash_write_cfiword(info, wp, cword);
379 }
380
381 /*-----------------------------------------------------------------------
382  */
383 int flash_real_protect(flash_info_t *info, long sector, int prot)
384 {
385         int retcode = 0;
386
387         flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
388         flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT);
389         if(prot)
390                 flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_SET);
391         else
392                 flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_CLEAR);
393
394         if((retcode = flash_full_status_check(info, sector, info->erase_blk_tout,
395                                          prot?"protect":"unprotect")) == 0) {
396
397                 info->protect[sector] = prot;
398                 /* Intel's unprotect unprotects all locking */
399                 if(prot == 0) {
400                         int i;
401                         for(i = 0 ; i<info->sector_count; i++) {
402                                 if(info->protect[i])
403                                         flash_real_protect(info, i, 1);
404                         }
405                 }
406         }
407
408         return retcode;
409 }
410 /*-----------------------------------------------------------------------
411  *  wait for XSR.7 to be set. Time out with an error if it does not.
412  *  This routine does not set the flash to read-array mode.
413  */
414 static int flash_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt)
415 {
416         ulong start;
417
418         /* Wait for command completion */
419         start = get_timer (0);
420         while(!flash_isset(info, sector, 0, FLASH_STATUS_DONE)) {
421                 if (get_timer(start) > info->erase_blk_tout) {
422                         printf("Flash %s timeout at address %lx\n", prompt, info->start[sector]);
423                         flash_write_cmd(info, sector, 0, FLASH_CMD_RESET);
424                         return ERR_TIMOUT;
425                 }
426         }
427         return ERR_OK;
428 }
429 /*-----------------------------------------------------------------------
430  * Wait for XSR.7 to be set, if it times out print an error, otherwise do a full status check.
431  * This routine sets the flash to read-array mode.
432  */
433 static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt)
434 {
435         int retcode;
436         retcode = flash_status_check(info, sector, tout, prompt);
437         if((retcode == ERR_OK) && !flash_isequal(info,sector, 0, FLASH_STATUS_DONE)) {
438                 retcode = ERR_INVAL;
439                 printf("Flash %s error at address %lx\n", prompt,info->start[sector]);
440                 if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS | FLASH_STATUS_PSLBS)){
441                         printf("Command Sequence Error.\n");
442                 } else if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS)){
443                         printf("Block Erase Error.\n");
444                         retcode = ERR_NOT_ERASED;
445                 } else if (flash_isset(info, sector, 0, FLASH_STATUS_PSLBS)) {
446                         printf("Locking Error\n");
447                 }
448                 if(flash_isset(info, sector, 0, FLASH_STATUS_DPS)){
449                         printf("Block locked.\n");
450                         retcode = ERR_PROTECTED;
451                 }
452                 if(flash_isset(info, sector, 0, FLASH_STATUS_VPENS))
453                         printf("Vpp Low Error.\n");
454         }
455         flash_write_cmd(info, sector, 0, FLASH_CMD_RESET);
456         return retcode;
457 }
458 /*-----------------------------------------------------------------------
459  */
460 static void flash_add_byte(flash_info_t *info, cfiword_t * cword, uchar c)
461 {
462         switch(info->portwidth) {
463         case FLASH_CFI_8BIT:
464                 cword->c = c;
465                 break;
466         case FLASH_CFI_16BIT:
467                 cword->w = (cword->w << 8) | c;
468                 break;
469         case FLASH_CFI_32BIT:
470                 cword->l = (cword->l << 8) | c;
471         }
472 }
473
474
475 /*-----------------------------------------------------------------------
476  * make a proper sized command based on the port and chip widths
477  */
478 static void flash_make_cmd(flash_info_t * info, uchar cmd, void * cmdbuf)
479 {
480         int i;
481         uchar *cp = (uchar *)cmdbuf;
482         for(i=0; i< info->portwidth; i++)
483                 *cp++ = ((i+1) % info->chipwidth) ? '\0':cmd;
484 }
485
486 /*
487  * Write a proper sized command to the correct address
488  */
489 static void flash_write_cmd(flash_info_t * info, int sect, uchar offset, uchar cmd)
490 {
491
492         volatile cfiptr_t addr;
493         cfiword_t cword;
494         addr.cp = flash_make_addr(info, sect, offset);
495         flash_make_cmd(info, cmd, &cword);
496         switch(info->portwidth) {
497         case FLASH_CFI_8BIT:
498                 *addr.cp = cword.c;
499                 break;
500         case FLASH_CFI_16BIT:
501                 *addr.wp = cword.w;
502                 break;
503         case FLASH_CFI_32BIT:
504                 *addr.lp = cword.l;
505                 break;
506         }
507 }
508
509 /*-----------------------------------------------------------------------
510  */
511 static int flash_isequal(flash_info_t * info, int sect, uchar offset, uchar cmd)
512 {
513         cfiptr_t cptr;
514         cfiword_t cword;
515         int retval;
516         cptr.cp = flash_make_addr(info, sect, offset);
517         flash_make_cmd(info, cmd, &cword);
518         switch(info->portwidth) {
519         case FLASH_CFI_8BIT:
520                 retval = (cptr.cp[0] == cword.c);
521                 break;
522         case FLASH_CFI_16BIT:
523                 retval = (cptr.wp[0] == cword.w);
524                 break;
525         case FLASH_CFI_32BIT:
526                 retval = (cptr.lp[0] == cword.l);
527                 break;
528         default:
529                 retval = 0;
530                 break;
531         }
532         return retval;
533 }
534 /*-----------------------------------------------------------------------
535  */
536 static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd)
537 {
538         cfiptr_t cptr;
539         cfiword_t cword;
540         int retval;
541         cptr.cp = flash_make_addr(info, sect, offset);
542         flash_make_cmd(info, cmd, &cword);
543         switch(info->portwidth) {
544         case FLASH_CFI_8BIT:
545                 retval = ((cptr.cp[0] & cword.c) == cword.c);
546                 break;
547         case FLASH_CFI_16BIT:
548                 retval = ((cptr.wp[0] & cword.w) == cword.w);
549                 break;
550         case FLASH_CFI_32BIT:
551                 retval = ((cptr.lp[0] & cword.l) == cword.l);
552                 break;
553         default:
554                 retval = 0;
555                 break;
556         }
557         return retval;
558 }
559
560 /*-----------------------------------------------------------------------
561  * detect if flash is compatible with the Common Flash Interface (CFI)
562  * http://www.jedec.org/download/search/jesd68.pdf
563  *
564 */
565 static int flash_detect_cfi(flash_info_t * info)
566 {
567
568         for(info->portwidth=FLASH_CFI_8BIT; info->portwidth <= FLASH_CFI_32BIT;
569             info->portwidth <<= 1) {
570                 for(info->chipwidth =FLASH_CFI_BY8;
571                     info->chipwidth <= info->portwidth;
572                     info->chipwidth <<= 1) {
573                         flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
574                         flash_write_cmd(info, 0, FLASH_OFFSET_CFI, FLASH_CMD_CFI);
575                         if(flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP,'Q') &&
576                            flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R') &&
577                            flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y'))
578                                 return 1;
579                 }
580         }
581         return 0;
582 }
583 /*
584  * The following code cannot be run from FLASH!
585  *
586  */
587 static ulong flash_get_size (ulong base, int banknum)
588 {
589         flash_info_t * info = &flash_info[banknum];
590         int i, j;
591         int sect_cnt;
592         unsigned long sector;
593         unsigned long tmp;
594         int size_ratio;
595         uchar num_erase_regions;
596         int  erase_region_size;
597         int  erase_region_count;
598
599         info->start[0] = base;
600
601         if(flash_detect_cfi(info)){
602 #ifdef DEBUG_FLASH
603                 printf("portwidth=%d chipwidth=%d\n", info->portwidth, info->chipwidth); /* test-only */
604 #endif
605                 size_ratio = info->portwidth / info->chipwidth;
606                 num_erase_regions = flash_read_uchar(info, FLASH_OFFSET_NUM_ERASE_REGIONS);
607 #ifdef DEBUG_FLASH
608                 printf("found %d erase regions\n", num_erase_regions);
609 #endif
610                 sect_cnt = 0;
611                 sector = base;
612                 for(i = 0 ; i < num_erase_regions; i++) {
613                         if(i > NUM_ERASE_REGIONS) {
614                                 printf("%d erase regions found, only %d used\n",
615                                        num_erase_regions, NUM_ERASE_REGIONS);
616                                 break;
617                         }
618                         tmp = flash_read_long(info, 0, FLASH_OFFSET_ERASE_REGIONS);
619                         erase_region_size = (tmp & 0xffff)? ((tmp & 0xffff) * 256): 128;
620                         tmp >>= 16;
621                         erase_region_count = (tmp & 0xffff) +1;
622                         for(j = 0; j< erase_region_count; j++) {
623                                 info->start[sect_cnt] = sector;
624                                 sector += (erase_region_size * size_ratio);
625                                 info->protect[sect_cnt] = flash_isset(info, sect_cnt, FLASH_OFFSET_PROTECT, FLASH_STATUS_PROTECT);
626                                 sect_cnt++;
627                         }
628                 }
629
630                 info->sector_count = sect_cnt;
631                 /* multiply the size by the number of chips */
632                 info->size = (1 << flash_read_uchar(info, FLASH_OFFSET_SIZE)) * size_ratio;
633                 info->buffer_size = (1 << flash_read_ushort(info, 0, FLASH_OFFSET_BUFFER_SIZE));
634                 tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_ETOUT);
635                 info->erase_blk_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_EMAX_TOUT)));
636                 tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WBTOUT);
637                 info->buffer_write_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_WBMAX_TOUT)));
638                 tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WTOUT);
639                 info->write_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_WMAX_TOUT)))/ 1000;
640                 info->flash_id = FLASH_MAN_CFI;
641         }
642
643         flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
644         return(info->size);
645 }
646
647
648 /*-----------------------------------------------------------------------
649  */
650 static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword)
651 {
652
653         cfiptr_t cptr;
654         int flag;
655
656         cptr.cp = (uchar *)dest;
657
658         /* Check if Flash is (sufficiently) erased */
659         switch(info->portwidth) {
660         case FLASH_CFI_8BIT:
661                 flag = ((cptr.cp[0] & cword.c) == cword.c);
662                 break;
663         case FLASH_CFI_16BIT:
664                 flag = ((cptr.wp[0] & cword.w) == cword.w);
665                 break;
666         case FLASH_CFI_32BIT:
667                 flag = ((cptr.lp[0] & cword.l)  == cword.l);
668                 break;
669         default:
670                 return 2;
671         }
672         if(!flag)
673                 return 2;
674
675         /* Disable interrupts which might cause a timeout here */
676         flag = disable_interrupts();
677
678         flash_write_cmd(info, 0, 0, FLASH_CMD_CLEAR_STATUS);
679         flash_write_cmd(info, 0, 0, FLASH_CMD_WRITE);
680
681         switch(info->portwidth) {
682         case FLASH_CFI_8BIT:
683                 cptr.cp[0] = cword.c;
684                 break;
685         case FLASH_CFI_16BIT:
686                 cptr.wp[0] = cword.w;
687                 break;
688         case FLASH_CFI_32BIT:
689                 cptr.lp[0] = cword.l;
690                 break;
691         }
692
693         /* re-enable interrupts if necessary */
694         if(flag)
695                 enable_interrupts();
696
697         return flash_full_status_check(info, 0, info->write_tout, "write");
698 }
699
700 #ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
701
702 /* loop through the sectors from the highest address
703  * when the passed address is greater or equal to the sector address
704  * we have a match
705  */
706 static int find_sector(flash_info_t *info, ulong addr)
707 {
708         int sector;
709         for(sector = info->sector_count - 1; sector >= 0; sector--) {
710                 if(addr >= info->start[sector])
711                         break;
712         }
713         return sector;
714 }
715
716 static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len)
717 {
718
719         int sector;
720         int cnt;
721         int retcode;
722         volatile cfiptr_t src;
723         volatile cfiptr_t dst;
724
725         src.cp = cp;
726         dst.cp = (uchar *)dest;
727         sector = find_sector(info, dest);
728         flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
729         flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_TO_BUFFER);
730         if((retcode = flash_status_check(info, sector, info->buffer_write_tout,
731                                          "write to buffer")) == ERR_OK) {
732                 switch(info->portwidth) {
733                 case FLASH_CFI_8BIT:
734                         cnt = len;
735                         break;
736                 case FLASH_CFI_16BIT:
737                         cnt = len >> 1;
738                         if (len & 0x1) { /* test-only: unaligned size */
739                                 puts("\nUnalgined size!!!\n"); /* test-only */
740                                 cnt++;
741                         }
742                         break;
743                 case FLASH_CFI_32BIT:
744                         cnt = len >> 2;
745                         break;
746                 default:
747                         return ERR_INVAL;
748                         break;
749                 }
750                 flash_write_cmd(info, sector, 0, (uchar)cnt-1);
751                 while(cnt-- > 0) {
752                         switch(info->portwidth) {
753                         case FLASH_CFI_8BIT:
754                                 *dst.cp++ = *src.cp++;
755                                 break;
756                         case FLASH_CFI_16BIT:
757                                 *dst.wp++ = *src.wp++;
758                                 break;
759                         case FLASH_CFI_32BIT:
760                                 *dst.lp++ = *src.lp++;
761                                 break;
762                         default:
763                                 return ERR_INVAL;
764                                 break;
765                         }
766                 }
767                 flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_BUFFER_CONFIRM);
768                 retcode = flash_full_status_check(info, sector, info->buffer_write_tout,
769                                              "buffer write");
770         }
771         flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
772         return retcode;
773 }
774 #endif /* CONFIG_SYS_USE_FLASH_BUFFER_WRITE */