]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - board/mbx8xx/dimm.h
ARM: highbank: use default prompt
[karo-tx-uboot.git] / board / mbx8xx / dimm.h
1 #ifndef __dimm_h
2 #define __dimm_h
3
4 /*
5  * Module name: %M%
6  * Description:
7  * Serial Presence Detect Definitions Module
8  * SCCS identification: %I%
9  * Branch: %B%
10  * Sequence: %S%
11  * Date newest applied delta was created (MM/DD/YY): %G%
12  * Time newest applied delta was created (HH:MM:SS): %U%
13  * SCCS file name %F%
14  * Fully qualified SCCS file name:
15  * %P%
16  * Copyright:
17  * (C) COPYRIGHT MOTOROLA, INC. 1996
18  * ALL RIGHTS RESERVED
19  * Notes:
20  * 1. All data was taken from an IBM application note titled
21  * "Serial Presence Detect Definitions".
22  * History:
23  * Date Who
24  *
25  * 10/24/96 Rob Baxter
26  * Initial release.
27  *
28  */
29
30 /*
31  * serial PD byte assignment address map (256 byte EEPROM)
32  */
33 typedef struct dimm
34 {
35         uchar n_bytes; /* 00 number of bytes written/used */
36         uchar t_bytes; /* 01 total number of bytes in serial PD device */
37         uchar fmt; /* 02 fundamental memory type (FPM/EDO/SDRAM) */
38         uchar n_row; /* 03 number of rows */
39         uchar n_col; /* 04 number of columns */
40         uchar n_banks; /* 05 number of banks */
41         uchar data_w_lo; /* 06 data width */
42         uchar data_w_hi; /* 07 data width */
43         uchar ifl; /* 08 interface levels */
44         uchar a_ras; /* 09 RAS access */
45         uchar a_cas; /* 0A CAS access */
46         uchar ct; /* 0B configuration type (non-parity/parity/ECC) */
47         uchar refresh_rt; /* 0C refresh rate/type */
48         uchar p_dram_o; /* 0D primary DRAM organization */
49         uchar s_dram_o; /* 0E secondary DRAM organization (parity/ECC-checkbits) */
50         uchar reserved[17]; /* 0F reserved fields for future offerings */
51         uchar ss_info[32]; /* 20 superset information (may be used in the future) */
52         uchar m_info[64]; /* 40 manufacturer information (optional) */
53         uchar unused[128]; /* 80 unused storage locations */
54 } dimm_t;
55
56 /*
57  * memory type definitions
58  */
59 #define DIMM_MT_FPM 1 /* standard FPM (fast page mode) DRAM */
60 #define DIMM_MT_EDO 2 /* EDO (extended data out) */
61 #define DIMM_MT_PN 3 /* pipelined nibble */
62 #define DIMM_MT_SDRAM 4 /* SDRAM (synchronous DRAM) */
63
64 /*
65  * row addresses definitions
66  */
67 #define DIMM_RA_RDNDNT (1<<7) /* redundant addressing */
68 #define DIMM_RA_MASK 0x7f /* number of row addresses mask */
69
70 /*
71  * module interface levels definitions
72  */
73 #define DIMM_IFL_TTL 0 /* TTL/5V tolerant */
74 #define DIMM_IFL_LVTTL 1 /* LVTTL (not 5V tolerant) */
75 #define DIMM_IFL_HSTL15 2 /* HSTL 1.5 */
76 #define DIMM_IFL_SSTL33 3 /* SSTL 3.3 */
77 #define DIMM_IFL_SSTL25 4 /* SSTL 2.5 */
78
79 /*
80  * DIMM configuration type definitions
81  */
82 #define DIMM_CT_NONE 0 /* none */
83 #define DIMM_CT_PARITY 1 /* parity */
84 #define DIMM_CT_ECC 2 /* ECC */
85
86 /*
87  * row addresses definitions
88  */
89 #define DIMM_RRT_SR (1<<7) /* self refresh flag */
90 #define DIMM_RRT_MASK 0x7f /* refresh rate mask */
91 #define DIMM_RRT_NRML 0x00 /* normal (15.625us) */
92 #define DIMM_RRT_R_3_9 0x01 /* reduced .25x (3.9us) */
93 #define DIMM_RRT_R_7_8 0x02 /* reduced .5x (7.8us) */
94 #define DIMM_RRT_E_31_3 0x03 /* extended 2x (31.3us) */
95 #define DIMM_RRT_E_62_5 0x04 /* extended 4x (62.5us) */
96 #define DIMM_RRT_E_125 0x05 /* extended 8x (125us) */
97
98 #endif /* __dimm_h */