]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - board/renesas/alt/alt.c
Merge branch 'master' of git://git.denx.de/u-boot-usb
[karo-tx-uboot.git] / board / renesas / alt / alt.c
1 /*
2  * board/renesas/alt/alt.c
3  *
4  * Copyright (C) 2014 Renesas Electronics Corporation
5  *
6  * SPDX-License-Identifier: GPL-2.0
7  */
8
9 #include <common.h>
10 #include <malloc.h>
11 #include <asm/processor.h>
12 #include <asm/mach-types.h>
13 #include <asm/io.h>
14 #include <asm/errno.h>
15 #include <asm/arch/sys_proto.h>
16 #include <asm/gpio.h>
17 #include <asm/arch/rmobile.h>
18 #include <asm/arch/rcar-mstp.h>
19 #include <asm/arch/mmc.h>
20 #include <netdev.h>
21 #include <miiphy.h>
22 #include <i2c.h>
23 #include <div64.h>
24 #include "qos.h"
25
26 DECLARE_GLOBAL_DATA_PTR;
27
28 #define CLK2MHZ(clk)    (clk / 1000 / 1000)
29 void s_init(void)
30 {
31         struct rcar_rwdt *rwdt = (struct rcar_rwdt *)RWDT_BASE;
32         struct rcar_swdt *swdt = (struct rcar_swdt *)SWDT_BASE;
33
34         /* Watchdog init */
35         writel(0xA5A5A500, &rwdt->rwtcsra);
36         writel(0xA5A5A500, &swdt->swtcsra);
37
38         /* QoS */
39         qos_init();
40 }
41
42 #define TMU0_MSTP125    (1 << 25)
43 #define SCIF2_MSTP719   (1 << 19)
44 #define ETHER_MSTP813   (1 << 13)
45 #define IIC1_MSTP323    (1 << 23)
46 #define MMC0_MSTP315    (1 << 15)
47
48 int board_early_init_f(void)
49 {
50         /* TMU */
51         mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
52
53         /* SCIF2 */
54         mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF2_MSTP719);
55
56         /* ETHER */
57         mstp_clrbits_le32(MSTPSR8, SMSTPCR8, ETHER_MSTP813);
58
59         /* IIC1 / sh-i2c ch1 */
60         mstp_clrbits_le32(MSTPSR3, SMSTPCR3, IIC1_MSTP323);
61
62 #ifdef CONFIG_SH_MMCIF
63         /* MMC */
64         mstp_clrbits_le32(MSTPSR3, SMSTPCR3, MMC0_MSTP315);
65 #endif
66         return 0;
67 }
68
69 int board_init(void)
70 {
71         /* adress of boot parameters */
72         gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
73
74         /* Init PFC controller */
75         r8a7794_pinmux_init();
76
77         /* Ether Enable */
78         gpio_request(GPIO_FN_ETH_CRS_DV, NULL);
79         gpio_request(GPIO_FN_ETH_RX_ER, NULL);
80         gpio_request(GPIO_FN_ETH_RXD0, NULL);
81         gpio_request(GPIO_FN_ETH_RXD1, NULL);
82         gpio_request(GPIO_FN_ETH_LINK, NULL);
83         gpio_request(GPIO_FN_ETH_REFCLK, NULL);
84         gpio_request(GPIO_FN_ETH_MDIO, NULL);
85         gpio_request(GPIO_FN_ETH_TXD1, NULL);
86         gpio_request(GPIO_FN_ETH_TX_EN, NULL);
87         gpio_request(GPIO_FN_ETH_MAGIC, NULL);
88         gpio_request(GPIO_FN_ETH_TXD0, NULL);
89         gpio_request(GPIO_FN_ETH_MDC, NULL);
90         gpio_request(GPIO_FN_IRQ8, NULL);
91
92         /* PHY reset */
93         gpio_request(GPIO_GP_1_24, NULL);
94         gpio_direction_output(GPIO_GP_1_24, 0);
95         mdelay(20);
96         gpio_set_value(GPIO_GP_1_24, 1);
97         udelay(1);
98
99         return 0;
100 }
101
102 #define CXR24 0xEE7003C0 /* MAC address high register */
103 #define CXR25 0xEE7003C8 /* MAC address low register */
104 int board_eth_init(bd_t *bis)
105 {
106 #ifdef CONFIG_SH_ETHER
107         int ret = -ENODEV;
108         u32 val;
109         unsigned char enetaddr[6];
110
111         ret = sh_eth_initialize(bis);
112         if (!eth_getenv_enetaddr("ethaddr", enetaddr))
113                 return ret;
114
115         /* Set Mac address */
116         val = enetaddr[0] << 24 | enetaddr[1] << 16 |
117                 enetaddr[2] << 8 | enetaddr[3];
118         writel(val, CXR24);
119
120         val = enetaddr[4] << 8 | enetaddr[5];
121         writel(val, CXR25);
122
123         return ret;
124 #else
125         return 0;
126 #endif
127 }
128
129 int board_mmc_init(bd_t *bis)
130 {
131         int ret = 0;
132
133 #ifdef CONFIG_SH_MMCIF
134         gpio_request(GPIO_GP_4_31, NULL);
135         gpio_set_value(GPIO_GP_4_31, 1);
136
137         ret = mmcif_mmc_init();
138 #endif
139         return ret;
140 }
141
142 int dram_init(void)
143 {
144         gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
145
146         return 0;
147 }
148
149 const struct rmobile_sysinfo sysinfo = {
150         CONFIG_RMOBILE_BOARD_STRING
151 };
152
153 void reset_cpu(ulong addr)
154 {
155         u8 val;
156
157         i2c_set_bus_num(1); /* PowerIC connected to ch1 */
158         i2c_read(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1);
159         val |= 0x02;
160         i2c_write(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1);
161 }