board/renesas/koelsch/koelsch.c

   1 /*
   2  * board/renesas/koelsch/koelsch.c
   3  *
   4  * Copyright (C) 2013 Renesas Electronics Corporation
   5  *
   6  * SPDX-License-Identifier: GPL-2.0
   7  *
   8  */
   9
  10 #include <common.h>
  11 #include <malloc.h>
  12 #include <asm/processor.h>
  13 #include <asm/mach-types.h>
  14 #include <asm/io.h>
  15 #include <asm/errno.h>
  16 #include <asm/arch/sys_proto.h>
  17 #include <asm/gpio.h>
  18 #include <asm/arch/rmobile.h>
  19 #include <netdev.h>
  20 #include <miiphy.h>
  21 #include <i2c.h>
  22 #include "qos.h"
  23
  24 DECLARE_GLOBAL_DATA_PTR;
  25
  26 #define s_init_wait(cnt) \
  27         ({      \
  28                 u32 i = 0x10000 * cnt;  \
  29                 while (i > 0)   \
  30                         i--;    \
  31         })
  32
  33
  34 #define dbpdrgd_check(bsc) \
  35         ({      \
  36                 while ((readl(&bsc->dbpdrgd) & 0x1) != 0x1)     \
  37                         ;       \
  38         })
  39
  40 #if defined(CONFIG_NORFLASH)
  41 static void bsc_init(void)
  42 {
  43         struct r8a7791_lbsc *lbsc = (struct r8a7791_lbsc *)LBSC_BASE;
  44         struct r8a7791_dbsc3 *dbsc3_0 = (struct r8a7791_dbsc3 *)DBSC3_0_BASE;
  45
  46         /* LBSC */
  47         writel(0x00000020, &lbsc->cs0ctrl);
  48         writel(0x00000020, &lbsc->cs1ctrl);
  49         writel(0x00002020, &lbsc->ecs0ctrl);
  50         writel(0x00002020, &lbsc->ecs1ctrl);
  51
  52         writel(0x077F077F, &lbsc->cswcr0);
  53         writel(0x077F077F, &lbsc->cswcr1);
  54         writel(0x077F077F, &lbsc->ecswcr0);
  55         writel(0x077F077F, &lbsc->ecswcr1);
  56
  57         /* DBSC3 */
  58         s_init_wait(10);
  59
  60         writel(0x0000A55A, &dbsc3_0->dbpdlck);
  61         writel(0x00000001, &dbsc3_0->dbpdrga);
  62         writel(0x80000000, &dbsc3_0->dbpdrgd);
  63         writel(0x00000004, &dbsc3_0->dbpdrga);
  64         dbpdrgd_check(dbsc3_0);
  65
  66         writel(0x00000006, &dbsc3_0->dbpdrga);
  67         writel(0x0001C000, &dbsc3_0->dbpdrgd);
  68
  69         writel(0x00000023, &dbsc3_0->dbpdrga);
  70         writel(0x00FD2480, &dbsc3_0->dbpdrgd);
  71
  72         writel(0x00000010, &dbsc3_0->dbpdrga);
  73         writel(0xF004649B, &dbsc3_0->dbpdrgd);
  74
  75         writel(0x0000000F, &dbsc3_0->dbpdrga);
  76         writel(0x00181EE4, &dbsc3_0->dbpdrgd);
  77
  78         writel(0x0000000E, &dbsc3_0->dbpdrga);
  79         writel(0x33C03812, &dbsc3_0->dbpdrgd);
  80
  81         writel(0x00000003, &dbsc3_0->dbpdrga);
  82         writel(0x0300C481, &dbsc3_0->dbpdrgd);
  83
  84         writel(0x00000007, &dbsc3_0->dbkind);
  85         writel(0x10030A02, &dbsc3_0->dbconf0);
  86         writel(0x00000001, &dbsc3_0->dbphytype);
  87         writel(0x00000000, &dbsc3_0->dbbl);
  88         writel(0x0000000B, &dbsc3_0->dbtr0);
  89         writel(0x00000008, &dbsc3_0->dbtr1);
  90         writel(0x00000000, &dbsc3_0->dbtr2);
  91         writel(0x0000000B, &dbsc3_0->dbtr3);
  92         writel(0x000C000B, &dbsc3_0->dbtr4);
  93         writel(0x00000027, &dbsc3_0->dbtr5);
  94         writel(0x0000001C, &dbsc3_0->dbtr6);
  95         writel(0x00000005, &dbsc3_0->dbtr7);
  96         writel(0x00000018, &dbsc3_0->dbtr8);
  97         writel(0x00000008, &dbsc3_0->dbtr9);
  98         writel(0x0000000C, &dbsc3_0->dbtr10);
  99         writel(0x00000009, &dbsc3_0->dbtr11);
 100         writel(0x00000012, &dbsc3_0->dbtr12);
 101         writel(0x000000D0, &dbsc3_0->dbtr13);
 102         writel(0x00140005, &dbsc3_0->dbtr14);
 103         writel(0x00050004, &dbsc3_0->dbtr15);
 104         writel(0x70233005, &dbsc3_0->dbtr16);
 105         writel(0x000C0000, &dbsc3_0->dbtr17);
 106         writel(0x00000300, &dbsc3_0->dbtr18);
 107         writel(0x00000040, &dbsc3_0->dbtr19);
 108         writel(0x00000001, &dbsc3_0->dbrnk0);
 109         writel(0x00020001, &dbsc3_0->dbadj0);
 110         writel(0x20082008, &dbsc3_0->dbadj2);
 111         writel(0x00020002, &dbsc3_0->dbwt0cnf0);
 112         writel(0x0000000F, &dbsc3_0->dbwt0cnf4);
 113
 114         writel(0x00000015, &dbsc3_0->dbpdrga);
 115         writel(0x00000D70, &dbsc3_0->dbpdrgd);
 116
 117         writel(0x00000016, &dbsc3_0->dbpdrga);
 118         writel(0x00000006, &dbsc3_0->dbpdrgd);
 119
 120         writel(0x00000017, &dbsc3_0->dbpdrga);
 121         writel(0x00000018, &dbsc3_0->dbpdrgd);
 122
 123         writel(0x00000012, &dbsc3_0->dbpdrga);
 124         writel(0x9D5CBB66, &dbsc3_0->dbpdrgd);
 125
 126         writel(0x00000013, &dbsc3_0->dbpdrga);
 127         writel(0x1A868300, &dbsc3_0->dbpdrgd);
 128
 129         writel(0x00000023, &dbsc3_0->dbpdrga);
 130         writel(0x00FDB6C0, &dbsc3_0->dbpdrgd);
 131
 132         writel(0x00000014, &dbsc3_0->dbpdrga);
 133         writel(0x300214D8, &dbsc3_0->dbpdrgd);
 134
 135         writel(0x0000001A, &dbsc3_0->dbpdrga);
 136         writel(0x930035C7, &dbsc3_0->dbpdrgd);
 137
 138         writel(0x00000060, &dbsc3_0->dbpdrga);
 139         writel(0x330657B2, &dbsc3_0->dbpdrgd);
 140
 141         writel(0x00000011, &dbsc3_0->dbpdrga);
 142         writel(0x1000040B, &dbsc3_0->dbpdrgd);
 143
 144         writel(0x0000FA00, &dbsc3_0->dbcmd);
 145         writel(0x00000001, &dbsc3_0->dbpdrga);
 146         writel(0x00000071, &dbsc3_0->dbpdrgd);
 147
 148         writel(0x00000004, &dbsc3_0->dbpdrga);
 149         dbpdrgd_check(dbsc3_0);
 150
 151         writel(0x0000FA00, &dbsc3_0->dbcmd);
 152         writel(0x2100FA00, &dbsc3_0->dbcmd);
 153         writel(0x0000FA00, &dbsc3_0->dbcmd);
 154         writel(0x0000FA00, &dbsc3_0->dbcmd);
 155         writel(0x0000FA00, &dbsc3_0->dbcmd);
 156         writel(0x0000FA00, &dbsc3_0->dbcmd);
 157         writel(0x0000FA00, &dbsc3_0->dbcmd);
 158         writel(0x0000FA00, &dbsc3_0->dbcmd);
 159         writel(0x0000FA00, &dbsc3_0->dbcmd);
 160
 161         writel(0x110000DB, &dbsc3_0->dbcmd);
 162
 163         writel(0x00000001, &dbsc3_0->dbpdrga);
 164         writel(0x00000181, &dbsc3_0->dbpdrgd);
 165
 166         writel(0x00000004, &dbsc3_0->dbpdrga);
 167         dbpdrgd_check(dbsc3_0);
 168
 169         writel(0x00000001, &dbsc3_0->dbpdrga);
 170         writel(0x0000FE01, &dbsc3_0->dbpdrgd);
 171
 172         writel(0x00000004, &dbsc3_0->dbpdrga);
 173         dbpdrgd_check(dbsc3_0);
 174
 175         writel(0x00000000, &dbsc3_0->dbbs0cnt1);
 176         writel(0x01004C20, &dbsc3_0->dbcalcnf);
 177         writel(0x014000AA, &dbsc3_0->dbcaltr);
 178         writel(0x00000140, &dbsc3_0->dbrfcnf0);
 179         writel(0x00081860, &dbsc3_0->dbrfcnf1);
 180         writel(0x00010000, &dbsc3_0->dbrfcnf2);
 181         writel(0x00000001, &dbsc3_0->dbrfen);
 182         writel(0x00000001, &dbsc3_0->dbacen);
 183 }
 184 #else
 185 #define bsc_init() do {} while (0)
 186 #endif /* CONFIG_NORFLASH */
 187
 188 void s_init(void)
 189 {
 190         struct r8a7791_rwdt *rwdt = (struct r8a7791_rwdt *)RWDT_BASE;
 191         struct r8a7791_swdt *swdt = (struct r8a7791_swdt *)SWDT_BASE;
 192
 193         /* Watchdog init */
 194         writel(0xA5A5A500, &rwdt->rwtcsra);
 195         writel(0xA5A5A500, &swdt->swtcsra);
 196
 197         /* QoS */
 198         qos_init();
 199
 200         /* BSC */
 201         bsc_init();
 202 }
 203
 204 #define MSTPSR1         0xE6150038
 205 #define SMSTPCR1        0xE6150134
 206 #define TMU0_MSTP125    (1 << 25)
 207
 208 #define MSTPSR7         0xE61501C4
 209 #define SMSTPCR7        0xE615014C
 210 #define SCIF0_MSTP721   (1 << 21)
 211
 212 #define MSTPSR8         0xE61509A0
 213 #define SMSTPCR8        0xE6150990
 214 #define ETHER_MSTP813   (1 << 13)
 215
 216 #define PMMR    0xE6060000
 217 #define GPSR4   0xE6060014
 218 #define IPSR14  0xE6060058
 219
 220 #define set_guard_reg(addr, mask, value)        \
 221 { \
 222         u32 val; \
 223         val = (readl(addr) & ~(mask)) | (value); \
 224         writel(~val, PMMR); \
 225         writel(val, addr); \
 226 }
 227
 228 #define mstp_setbits(type, addr, saddr, set) \
 229         out_##type((saddr), in_##type(addr) | (set))
 230 #define mstp_clrbits(type, addr, saddr, clear) \
 231         out_##type((saddr), in_##type(addr) & ~(clear))
 232 #define mstp_setbits_le32(addr, saddr, set) \
 233         mstp_setbits(le32, addr, saddr, set)
 234 #define mstp_clrbits_le32(addr, saddr, clear)   \
 235         mstp_clrbits(le32, addr, saddr, clear)
 236
 237 int board_early_init_f(void)
 238 {
 239         mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
 240
 241 #if defined(CONFIG_NORFLASH)
 242         /* SCIF0 */
 243         set_guard_reg(GPSR4, 0x34000000, 0x00000000);
 244         set_guard_reg(IPSR14, 0x00000FC7, 0x00000481);
 245         set_guard_reg(GPSR4, 0x00000000, 0x34000000);
 246 #endif
 247
 248         mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF0_MSTP721);
 249
 250         /* ETHER */
 251         mstp_clrbits_le32(MSTPSR8, SMSTPCR8, ETHER_MSTP813);
 252
 253         return 0;
 254 }
 255
 256 void arch_preboot_os(void)
 257 {
 258         /* Disable TMU0 */
 259         mstp_setbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
 260 }
 261
 262 /* LSI pin pull-up control */
 263 #define PUPR5 0xe6060114
 264 #define PUPR5_ETH 0x3FFC0000
 265 #define PUPR5_ETH_MAGIC (1 << 27)
 266 int board_init(void)
 267 {
 268         /* adress of boot parameters */
 269         gd->bd->bi_boot_params = KOELSCH_SDRAM_BASE + 0x100;
 270
 271         /* Init PFC controller */
 272         r8a7791_pinmux_init();
 273
 274         /* ETHER Enable */
 275         gpio_request(GPIO_FN_ETH_CRS_DV, NULL);
 276         gpio_request(GPIO_FN_ETH_RX_ER, NULL);
 277         gpio_request(GPIO_FN_ETH_RXD0, NULL);
 278         gpio_request(GPIO_FN_ETH_RXD1, NULL);
 279         gpio_request(GPIO_FN_ETH_LINK, NULL);
 280         gpio_request(GPIO_FN_ETH_REFCLK, NULL);
 281         gpio_request(GPIO_FN_ETH_MDIO, NULL);
 282         gpio_request(GPIO_FN_ETH_TXD1, NULL);
 283         gpio_request(GPIO_FN_ETH_TX_EN, NULL);
 284         gpio_request(GPIO_FN_ETH_TXD0, NULL);
 285         gpio_request(GPIO_FN_ETH_MDC, NULL);
 286         gpio_request(GPIO_FN_IRQ0, NULL);
 287
 288         mstp_clrbits_le32(PUPR5, PUPR5, PUPR5_ETH & ~PUPR5_ETH_MAGIC);
 289         gpio_request(GPIO_GP_5_22, NULL); /* PHY_RST */
 290         mstp_clrbits_le32(PUPR5, PUPR5, PUPR5_ETH_MAGIC);
 291
 292         gpio_direction_output(GPIO_GP_5_22, 0);
 293         mdelay(20);
 294         gpio_set_value(GPIO_GP_5_22, 1);
 295         udelay(1);
 296
 297         return 0;
 298 }
 299
 300 #define CXR24 0xEE7003C0 /* MAC address high register */
 301 #define CXR25 0xEE7003C8 /* MAC address low register */
 302 int board_eth_init(bd_t *bis)
 303 {
 304 #ifdef CONFIG_SH_ETHER
 305         int ret = -ENODEV;
 306         u32 val;
 307         unsigned char enetaddr[6];
 308
 309         ret = sh_eth_initialize(bis);
 310         if (!eth_getenv_enetaddr("ethaddr", enetaddr))
 311                 return ret;
 312
 313         /* Set Mac address */
 314         val = enetaddr[0] << 24 | enetaddr[1] << 16 |
 315                 enetaddr[2] << 8 | enetaddr[3];
 316         writel(val, CXR24);
 317
 318         val = enetaddr[4] << 8 | enetaddr[5];
 319         writel(val, CXR25);
 320
 321         return ret;
 322 #else
 323         return 0;
 324 #endif
 325 }
 326
 327 int dram_init(void)
 328 {
 329         gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
 330         gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
 331
 332         return 0;
 333 }
 334
 335 /* koelsch has KSZ8041NL/RNL */
 336 #define PHY_CONTROL1    0x1E
 337 #define PHY_LED_MODE    0xC0000
 338 #define PHY_LED_MODE_ACK        0x4000
 339 int board_phy_config(struct phy_device *phydev)
 340 {
 341         int ret = phy_read(phydev, MDIO_DEVAD_NONE, PHY_CONTROL1);
 342         ret &= ~PHY_LED_MODE;
 343         ret |= PHY_LED_MODE_ACK;
 344         ret = phy_write(phydev, MDIO_DEVAD_NONE, PHY_CONTROL1, (u16)ret);
 345
 346         return 0;
 347 }
 348
 349 const struct rmobile_sysinfo sysinfo = {
 350         CONFIG_RMOBILE_BOARD_STRING
 351 };
 352
 353 void dram_init_banksize(void)
 354 {
 355         gd->bd->bi_dram[0].start = KOELSCH_SDRAM_BASE;
 356         gd->bd->bi_dram[0].size = KOELSCH_SDRAM_SIZE;
 357 }
 358
 359 int board_late_init(void)
 360 {
 361         return 0;
 362 }
 363
 364 void reset_cpu(ulong addr)
 365 {
 366         u8 val;
 367
 368         i2c_set_bus_num(2); /* PowerIC connected to ch2 */
 369         i2c_read(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1);
 370         val |= 0x02;
 371         i2c_write(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1);
 372 }