board/samsung/goni/goni.c

   1 /*
   2  *  Copyright (C) 2008-2009 Samsung Electronics
   3  *  Minkyu Kang <mk7.kang@samsung.com>
   4  *  Kyungmin Park <kyungmin.park@samsung.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #include <common.h>
  10 #include <asm/arch/gpio.h>
  11 #include <asm/arch/mmc.h>
  12 #include <power/pmic.h>
  13 #include <usb/s3c_udc.h>
  14 #include <asm/arch/cpu.h>
  15 #include <power/max8998_pmic.h>
  16 #include <samsung/misc.h>
  17
  18 DECLARE_GLOBAL_DATA_PTR;
  19
  20 static struct s5pc110_gpio *s5pc110_gpio;
  21
  22 u32 get_board_rev(void)
  23 {
  24         return 0;
  25 }
  26
  27 int board_init(void)
  28 {
  29         /* Set Initial global variables */
  30         s5pc110_gpio = (struct s5pc110_gpio *)S5PC110_GPIO_BASE;
  31
  32         gd->bd->bi_arch_number = MACH_TYPE_GONI;
  33         gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
  34
  35         return 0;
  36 }
  37
  38 int power_init_board(void)
  39 {
  40         int ret;
  41
  42         /*
  43          * For PMIC the I2C bus is named as I2C5, but it is connected
  44          * to logical I2C adapter 0
  45          */
  46         ret = pmic_init(I2C_0);
  47         if (ret)
  48                 return ret;
  49
  50         return 0;
  51 }
  52
  53 int dram_init(void)
  54 {
  55         gd->ram_size = PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE +
  56                         PHYS_SDRAM_3_SIZE;
  57
  58         return 0;
  59 }
  60
  61 void dram_init_banksize(void)
  62 {
  63         gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
  64         gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
  65         gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
  66         gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
  67         gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
  68         gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
  69 }
  70
  71 #ifdef CONFIG_DISPLAY_BOARDINFO
  72 int checkboard(void)
  73 {
  74         puts("Board:\tGoni\n");
  75         return 0;
  76 }
  77 #endif
  78
  79 #ifdef CONFIG_GENERIC_MMC
  80 int board_mmc_init(bd_t *bis)
  81 {
  82         int i, ret, ret_sd = 0;
  83
  84         /* MASSMEMORY_EN: XMSMDATA7: GPJ2[7] output high */
  85         s5p_gpio_direction_output(&s5pc110_gpio->j2, 7, 1);
  86
  87         /*
  88          * MMC0 GPIO
  89          * GPG0[0]      SD_0_CLK
  90          * GPG0[1]      SD_0_CMD
  91          * GPG0[2]      SD_0_CDn        -> Not used
  92          * GPG0[3:6]    SD_0_DATA[0:3]
  93          */
  94         for (i = 0; i < 7; i++) {
  95                 if (i == 2)
  96                         continue;
  97                 /* GPG0[0:6] special function 2 */
  98                 s5p_gpio_cfg_pin(&s5pc110_gpio->g0, i, 0x2);
  99                 /* GPG0[0:6] pull disable */
 100                 s5p_gpio_set_pull(&s5pc110_gpio->g0, i, GPIO_PULL_NONE);
 101                 /* GPG0[0:6] drv 4x */
 102                 s5p_gpio_set_drv(&s5pc110_gpio->g0, i, GPIO_DRV_4X);
 103         }
 104
 105         ret = s5p_mmc_init(0, 4);
 106         if (ret)
 107                 error("MMC: Failed to init MMC:0.\n");
 108
 109         /*
 110          * SD card (T_FLASH) detect and init
 111          * T_FLASH_DETECT: EINT28: GPH3[4] input mode
 112          */
 113         s5p_gpio_cfg_pin(&s5pc110_gpio->h3, 4, GPIO_INPUT);
 114         s5p_gpio_set_pull(&s5pc110_gpio->h3, 4, GPIO_PULL_UP);
 115
 116         if (!s5p_gpio_get_value(&s5pc110_gpio->h3, 4)) {
 117                 for (i = 0; i < 7; i++) {
 118                         if (i == 2)
 119                                 continue;
 120
 121                         /* GPG2[0:6] special function 2 */
 122                         s5p_gpio_cfg_pin(&s5pc110_gpio->g2, i, 0x2);
 123                         /* GPG2[0:6] pull disable */
 124                         s5p_gpio_set_pull(&s5pc110_gpio->g2, i, GPIO_PULL_NONE);
 125                         /* GPG2[0:6] drv 4x */
 126                         s5p_gpio_set_drv(&s5pc110_gpio->g2, i, GPIO_DRV_4X);
 127                 }
 128
 129                 ret_sd = s5p_mmc_init(2, 4);
 130                 if (ret_sd)
 131                         error("MMC: Failed to init SD card (MMC:2).\n");
 132         }
 133
 134         return ret & ret_sd;
 135 }
 136 #endif
 137
 138 #ifdef CONFIG_USB_GADGET
 139 static int s5pc1xx_phy_control(int on)
 140 {
 141         int ret;
 142         static int status;
 143         struct pmic *p = pmic_get("MAX8998_PMIC");
 144         if (!p)
 145                 return -ENODEV;
 146
 147         if (pmic_probe(p))
 148                 return -1;
 149
 150         if (on && !status) {
 151                 ret = pmic_set_output(p, MAX8998_REG_ONOFF1,
 152                                       MAX8998_LDO3, LDO_ON);
 153                 ret = pmic_set_output(p, MAX8998_REG_ONOFF2,
 154                                       MAX8998_LDO8, LDO_ON);
 155                 if (ret) {
 156                         puts("MAX8998 LDO setting error!\n");
 157                         return -1;
 158                 }
 159                 status = 1;
 160         } else if (!on && status) {
 161                 ret = pmic_set_output(p, MAX8998_REG_ONOFF1,
 162                                       MAX8998_LDO3, LDO_OFF);
 163                 ret = pmic_set_output(p, MAX8998_REG_ONOFF2,
 164                                       MAX8998_LDO8, LDO_OFF);
 165                 if (ret) {
 166                         puts("MAX8998 LDO setting error!\n");
 167                         return -1;
 168                 }
 169                 status = 0;
 170         }
 171         udelay(10000);
 172
 173         return 0;
 174 }
 175
 176 struct s3c_plat_otg_data s5pc110_otg_data = {
 177         .phy_control = s5pc1xx_phy_control,
 178         .regs_phy = S5PC110_PHY_BASE,
 179         .regs_otg = S5PC110_OTG_BASE,
 180         .usb_phy_ctrl = S5PC110_USB_PHY_CONTROL,
 181 };
 182 #endif
 183
 184 #ifdef CONFIG_MISC_INIT_R
 185 int misc_init_r(void)
 186 {
 187 #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 188         set_board_info();
 189 #endif
 190         return 0;
 191 }
 192 #endif