drivers/ddr/fsl/lc_common_dimm_params.c

   1 /*
   2  * Copyright 2008-2014 Freescale Semiconductor, Inc.
   3  *
   4  * This program is free software; you can redistribute it and/or
   5  * modify it under the terms of the GNU General Public License
   6  * Version 2 as published by the Free Software Foundation.
   7  */
   8
   9 #include <common.h>
  10 #include <fsl_ddr_sdram.h>
  11
  12 #include <fsl_ddr.h>
  13
  14 #if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4)
  15 static unsigned int
  16 compute_cas_latency(const dimm_params_t *dimm_params,
  17                     common_timing_params_t *outpdimm,
  18                     unsigned int number_of_dimms)
  19 {
  20         unsigned int i;
  21         unsigned int common_caslat;
  22         unsigned int caslat_actual;
  23         unsigned int retry = 16;
  24         unsigned int tmp;
  25         const unsigned int mclk_ps = get_memory_clk_period_ps();
  26 #ifdef CONFIG_SYS_FSL_DDR3
  27         const unsigned int taamax = 20000;
  28 #else
  29         const unsigned int taamax = 18000;
  30 #endif
  31
  32         /* compute the common CAS latency supported between slots */
  33         tmp = dimm_params[0].caslat_x;
  34         for (i = 1; i < number_of_dimms; i++) {
  35                 if (dimm_params[i].n_ranks)
  36                         tmp &= dimm_params[i].caslat_x;
  37         }
  38         common_caslat = tmp;
  39
  40         /* validate if the memory clk is in the range of dimms */
  41         if (mclk_ps < outpdimm->tckmin_x_ps) {
  42                 printf("DDR clock (MCLK cycle %u ps) is faster than "
  43                         "the slowest DIMM(s) (tCKmin %u ps) can support.\n",
  44                         mclk_ps, outpdimm->tckmin_x_ps);
  45         }
  46 #ifdef CONFIG_SYS_FSL_DDR4
  47         if (mclk_ps > outpdimm->tckmax_ps) {
  48                 printf("DDR clock (MCLK cycle %u ps) is slower than DIMM(s) (tCKmax %u ps) can support.\n",
  49                        mclk_ps, outpdimm->tckmax_ps);
  50         }
  51 #endif
  52         /* determine the acutal cas latency */
  53         caslat_actual = (outpdimm->taamin_ps + mclk_ps - 1) / mclk_ps;
  54         /* check if the dimms support the CAS latency */
  55         while (!(common_caslat & (1 << caslat_actual)) && retry > 0) {
  56                 caslat_actual++;
  57                 retry--;
  58         }
  59         /* once the caculation of caslat_actual is completed
  60          * we must verify that this CAS latency value does not
  61          * exceed tAAmax, which is 20 ns for all DDR3 speed grades,
  62          * 18ns for all DDR4 speed grades.
  63          */
  64         if (caslat_actual * mclk_ps > taamax) {
  65                 printf("The choosen cas latency %d is too large\n",
  66                         caslat_actual);
  67         }
  68         outpdimm->lowest_common_spd_caslat = caslat_actual;
  69         debug("lowest_common_spd_caslat is 0x%x\n", caslat_actual);
  70
  71         return 0;
  72 }
  73 #else   /* for DDR1 and DDR2 */
  74 static unsigned int
  75 compute_cas_latency(const dimm_params_t *dimm_params,
  76                     common_timing_params_t *outpdimm,
  77                     unsigned int number_of_dimms)
  78 {
  79         int i;
  80         const unsigned int mclk_ps = get_memory_clk_period_ps();
  81         unsigned int lowest_good_caslat;
  82         unsigned int not_ok;
  83         unsigned int temp1, temp2;
  84
  85         debug("using mclk_ps = %u\n", mclk_ps);
  86         if (mclk_ps > outpdimm->tckmax_ps) {
  87                 printf("Warning: DDR clock (%u ps) is slower than DIMM(s) (tCKmax %u ps)\n",
  88                        mclk_ps, outpdimm->tckmax_ps);
  89         }
  90
  91         /*
  92          * Compute a CAS latency suitable for all DIMMs
  93          *
  94          * Strategy for SPD-defined latencies: compute only
  95          * CAS latency defined by all DIMMs.
  96          */
  97
  98         /*
  99          * Step 1: find CAS latency common to all DIMMs using bitwise
 100          * operation.
 101          */
 102         temp1 = 0xFF;
 103         for (i = 0; i < number_of_dimms; i++) {
 104                 if (dimm_params[i].n_ranks) {
 105                         temp2 = 0;
 106                         temp2 |= 1 << dimm_params[i].caslat_x;
 107                         temp2 |= 1 << dimm_params[i].caslat_x_minus_1;
 108                         temp2 |= 1 << dimm_params[i].caslat_x_minus_2;
 109                         /*
 110                          * If there was no entry for X-2 (X-1) in
 111                          * the SPD, then caslat_x_minus_2
 112                          * (caslat_x_minus_1) contains either 255 or
 113                          * 0xFFFFFFFF because that's what the glorious
 114                          * __ilog2 function returns for an input of 0.
 115                          * On 32-bit PowerPC, left shift counts with bit
 116                          * 26 set (that the value of 255 or 0xFFFFFFFF
 117                          * will have), cause the destination register to
 118                          * be 0.  That is why this works.
 119                          */
 120                         temp1 &= temp2;
 121                 }
 122         }
 123
 124         /*
 125          * Step 2: check each common CAS latency against tCK of each
 126          * DIMM's SPD.
 127          */
 128         lowest_good_caslat = 0;
 129         temp2 = 0;
 130         while (temp1) {
 131                 not_ok = 0;
 132                 temp2 =  __ilog2(temp1);
 133                 debug("checking common caslat = %u\n", temp2);
 134
 135                 /* Check if this CAS latency will work on all DIMMs at tCK. */
 136                 for (i = 0; i < number_of_dimms; i++) {
 137                         if (!dimm_params[i].n_ranks)
 138                                 continue;
 139
 140                         if (dimm_params[i].caslat_x == temp2) {
 141                                 if (mclk_ps >= dimm_params[i].tckmin_x_ps) {
 142                                         debug("CL = %u ok on DIMM %u at tCK=%u ps with tCKmin_X_ps of %u\n",
 143                                               temp2, i, mclk_ps,
 144                                               dimm_params[i].tckmin_x_ps);
 145                                         continue;
 146                                 } else {
 147                                         not_ok++;
 148                                 }
 149                         }
 150
 151                         if (dimm_params[i].caslat_x_minus_1 == temp2) {
 152                                 unsigned int tckmin_x_minus_1_ps
 153                                         = dimm_params[i].tckmin_x_minus_1_ps;
 154                                 if (mclk_ps >= tckmin_x_minus_1_ps) {
 155                                         debug("CL = %u ok on DIMM %u at tCK=%u ps with tckmin_x_minus_1_ps of %u\n",
 156                                               temp2, i, mclk_ps,
 157                                               tckmin_x_minus_1_ps);
 158                                         continue;
 159                                 } else {
 160                                         not_ok++;
 161                                 }
 162                         }
 163
 164                         if (dimm_params[i].caslat_x_minus_2 == temp2) {
 165                                 unsigned int tckmin_x_minus_2_ps
 166                                         = dimm_params[i].tckmin_x_minus_2_ps;
 167                                 if (mclk_ps >= tckmin_x_minus_2_ps) {
 168                                         debug("CL = %u ok on DIMM %u at tCK=%u ps with tckmin_x_minus_2_ps of %u\n",
 169                                               temp2, i, mclk_ps,
 170                                               tckmin_x_minus_2_ps);
 171                                         continue;
 172                                 } else {
 173                                         not_ok++;
 174                                 }
 175                         }
 176                 }
 177
 178                 if (!not_ok)
 179                         lowest_good_caslat = temp2;
 180
 181                 temp1 &= ~(1 << temp2);
 182         }
 183
 184         debug("lowest common SPD-defined CAS latency = %u\n",
 185               lowest_good_caslat);
 186         outpdimm->lowest_common_spd_caslat = lowest_good_caslat;
 187
 188
 189         /*
 190          * Compute a common 'de-rated' CAS latency.
 191          *
 192          * The strategy here is to find the *highest* dereated cas latency
 193          * with the assumption that all of the DIMMs will support a dereated
 194          * CAS latency higher than or equal to their lowest dereated value.
 195          */
 196         temp1 = 0;
 197         for (i = 0; i < number_of_dimms; i++)
 198                 temp1 = max(temp1, dimm_params[i].caslat_lowest_derated);
 199
 200         outpdimm->highest_common_derated_caslat = temp1;
 201         debug("highest common dereated CAS latency = %u\n", temp1);
 202
 203         return 0;
 204 }
 205 #endif
 206
 207 /*
 208  * compute_lowest_common_dimm_parameters()
 209  *
 210  * Determine the worst-case DIMM timing parameters from the set of DIMMs
 211  * whose parameters have been computed into the array pointed to
 212  * by dimm_params.
 213  */
 214 unsigned int
 215 compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
 216                                       common_timing_params_t *outpdimm,
 217                                       const unsigned int number_of_dimms)
 218 {
 219         unsigned int i, j;
 220
 221         unsigned int tckmin_x_ps = 0;
 222         unsigned int tckmax_ps = 0xFFFFFFFF;
 223         unsigned int trcd_ps = 0;
 224         unsigned int trp_ps = 0;
 225         unsigned int tras_ps = 0;
 226 #if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4)
 227         unsigned int taamin_ps = 0;
 228 #endif
 229 #ifdef CONFIG_SYS_FSL_DDR4
 230         unsigned int twr_ps = 15000;
 231         unsigned int trfc1_ps = 0;
 232         unsigned int trfc2_ps = 0;
 233         unsigned int trfc4_ps = 0;
 234         unsigned int trrds_ps = 0;
 235         unsigned int trrdl_ps = 0;
 236         unsigned int tccdl_ps = 0;
 237 #else
 238         unsigned int twr_ps = 0;
 239         unsigned int twtr_ps = 0;
 240         unsigned int trfc_ps = 0;
 241         unsigned int trrd_ps = 0;
 242         unsigned int trtp_ps = 0;
 243 #endif
 244         unsigned int trc_ps = 0;
 245         unsigned int refresh_rate_ps = 0;
 246         unsigned int extended_op_srt = 1;
 247 #if defined(CONFIG_SYS_FSL_DDR1) || defined(CONFIG_SYS_FSL_DDR2)
 248         unsigned int tis_ps = 0;
 249         unsigned int tih_ps = 0;
 250         unsigned int tds_ps = 0;
 251         unsigned int tdh_ps = 0;
 252         unsigned int tdqsq_max_ps = 0;
 253         unsigned int tqhs_ps = 0;
 254 #endif
 255         unsigned int temp1, temp2;
 256         unsigned int additive_latency = 0;
 257
 258         temp1 = 0;
 259         for (i = 0; i < number_of_dimms; i++) {
 260                 /*
 261                  * If there are no ranks on this DIMM,
 262                  * it probably doesn't exist, so skip it.
 263                  */
 264                 if (dimm_params[i].n_ranks == 0) {
 265                         temp1++;
 266                         continue;
 267                 }
 268                 if (dimm_params[i].n_ranks == 4 && i != 0) {
 269                         printf("Found Quad-rank DIMM in wrong bank, ignored."
 270                                 " Software may not run as expected.\n");
 271                         temp1++;
 272                         continue;
 273                 }
 274
 275                 /*
 276                  * check if quad-rank DIMM is plugged if
 277                  * CONFIG_CHIP_SELECT_QUAD_CAPABLE is not defined
 278                  * Only the board with proper design is capable
 279                  */
 280 #ifndef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
 281                 if (dimm_params[i].n_ranks == 4 && \
 282                   CONFIG_CHIP_SELECTS_PER_CTRL/CONFIG_DIMM_SLOTS_PER_CTLR < 4) {
 283                         printf("Found Quad-rank DIMM, not able to support.");
 284                         temp1++;
 285                         continue;
 286                 }
 287 #endif
 288                 /*
 289                  * Find minimum tckmax_ps to find fastest slow speed,
 290                  * i.e., this is the slowest the whole system can go.
 291                  */
 292                 tckmax_ps = min(tckmax_ps, dimm_params[i].tckmax_ps);
 293 #if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4)
 294                 taamin_ps = max(taamin_ps, dimm_params[i].taa_ps);
 295 #endif
 296                 tckmin_x_ps = max(tckmin_x_ps, dimm_params[i].tckmin_x_ps);
 297                 trcd_ps = max(trcd_ps, dimm_params[i].trcd_ps);
 298                 trp_ps = max(trp_ps, dimm_params[i].trp_ps);
 299                 tras_ps = max(tras_ps, dimm_params[i].tras_ps);
 300 #ifdef CONFIG_SYS_FSL_DDR4
 301                 trfc1_ps = max(trfc1_ps, dimm_params[i].trfc1_ps);
 302                 trfc2_ps = max(trfc2_ps, dimm_params[i].trfc2_ps);
 303                 trfc4_ps = max(trfc4_ps, dimm_params[i].trfc4_ps);
 304                 trrds_ps = max(trrds_ps, dimm_params[i].trrds_ps);
 305                 trrdl_ps = max(trrdl_ps, dimm_params[i].trrdl_ps);
 306                 tccdl_ps = max(tccdl_ps, dimm_params[i].tccdl_ps);
 307 #else
 308                 twr_ps = max(twr_ps, dimm_params[i].twr_ps);
 309                 twtr_ps = max(twtr_ps, dimm_params[i].twtr_ps);
 310                 trfc_ps = max(trfc_ps, dimm_params[i].trfc_ps);
 311                 trrd_ps = max(trrd_ps, dimm_params[i].trrd_ps);
 312                 trtp_ps = max(trtp_ps, dimm_params[i].trtp_ps);
 313 #endif
 314                 trc_ps = max(trc_ps, dimm_params[i].trc_ps);
 315 #if defined(CONFIG_SYS_FSL_DDR1) || defined(CONFIG_SYS_FSL_DDR2)
 316                 tis_ps = max(tis_ps, dimm_params[i].tis_ps);
 317                 tih_ps = max(tih_ps, dimm_params[i].tih_ps);
 318                 tds_ps = max(tds_ps, dimm_params[i].tds_ps);
 319                 tdh_ps = max(tdh_ps, dimm_params[i].tdh_ps);
 320                 tqhs_ps = max(tqhs_ps, dimm_params[i].tqhs_ps);
 321                 /*
 322                  * Find maximum tdqsq_max_ps to find slowest.
 323                  *
 324                  * FIXME: is finding the slowest value the correct
 325                  * strategy for this parameter?
 326                  */
 327                 tdqsq_max_ps = max(tdqsq_max_ps, dimm_params[i].tdqsq_max_ps);
 328 #endif
 329                 refresh_rate_ps = max(refresh_rate_ps,
 330                                       dimm_params[i].refresh_rate_ps);
 331                 /* extended_op_srt is either 0 or 1, 0 having priority */
 332                 extended_op_srt = min(extended_op_srt,
 333                                       dimm_params[i].extended_op_srt);
 334         }
 335
 336         outpdimm->ndimms_present = number_of_dimms - temp1;
 337
 338         if (temp1 == number_of_dimms) {
 339                 debug("no dimms this memory controller\n");
 340                 return 0;
 341         }
 342
 343         outpdimm->tckmin_x_ps = tckmin_x_ps;
 344         outpdimm->tckmax_ps = tckmax_ps;
 345 #if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4)
 346         outpdimm->taamin_ps = taamin_ps;
 347 #endif
 348         outpdimm->trcd_ps = trcd_ps;
 349         outpdimm->trp_ps = trp_ps;
 350         outpdimm->tras_ps = tras_ps;
 351 #ifdef CONFIG_SYS_FSL_DDR4
 352         outpdimm->trfc1_ps = trfc1_ps;
 353         outpdimm->trfc2_ps = trfc2_ps;
 354         outpdimm->trfc4_ps = trfc4_ps;
 355         outpdimm->trrds_ps = trrds_ps;
 356         outpdimm->trrdl_ps = trrdl_ps;
 357         outpdimm->tccdl_ps = tccdl_ps;
 358 #else
 359         outpdimm->twtr_ps = twtr_ps;
 360         outpdimm->trfc_ps = trfc_ps;
 361         outpdimm->trrd_ps = trrd_ps;
 362         outpdimm->trtp_ps = trtp_ps;
 363 #endif
 364         outpdimm->twr_ps = twr_ps;
 365         outpdimm->trc_ps = trc_ps;
 366         outpdimm->refresh_rate_ps = refresh_rate_ps;
 367         outpdimm->extended_op_srt = extended_op_srt;
 368 #if defined(CONFIG_SYS_FSL_DDR1) || defined(CONFIG_SYS_FSL_DDR2)
 369         outpdimm->tis_ps = tis_ps;
 370         outpdimm->tih_ps = tih_ps;
 371         outpdimm->tds_ps = tds_ps;
 372         outpdimm->tdh_ps = tdh_ps;
 373         outpdimm->tdqsq_max_ps = tdqsq_max_ps;
 374         outpdimm->tqhs_ps = tqhs_ps;
 375 #endif
 376
 377         /* Determine common burst length for all DIMMs. */
 378         temp1 = 0xff;
 379         for (i = 0; i < number_of_dimms; i++) {
 380                 if (dimm_params[i].n_ranks) {
 381                         temp1 &= dimm_params[i].burst_lengths_bitmask;
 382                 }
 383         }
 384         outpdimm->all_dimms_burst_lengths_bitmask = temp1;
 385
 386         /* Determine if all DIMMs registered buffered. */
 387         temp1 = temp2 = 0;
 388         for (i = 0; i < number_of_dimms; i++) {
 389                 if (dimm_params[i].n_ranks) {
 390                         if (dimm_params[i].registered_dimm) {
 391                                 temp1 = 1;
 392 #ifndef CONFIG_SPL_BUILD
 393                                 printf("Detected RDIMM %s\n",
 394                                         dimm_params[i].mpart);
 395 #endif
 396                         } else {
 397                                 temp2 = 1;
 398 #ifndef CONFIG_SPL_BUILD
 399                                 printf("Detected UDIMM %s\n",
 400                                         dimm_params[i].mpart);
 401 #endif
 402                         }
 403                 }
 404         }
 405
 406         outpdimm->all_dimms_registered = 0;
 407         outpdimm->all_dimms_unbuffered = 0;
 408         if (temp1 && !temp2) {
 409                 outpdimm->all_dimms_registered = 1;
 410         } else if (!temp1 && temp2) {
 411                 outpdimm->all_dimms_unbuffered = 1;
 412         } else {
 413                 printf("ERROR:  Mix of registered buffered and unbuffered "
 414                                 "DIMMs detected!\n");
 415         }
 416
 417         temp1 = 0;
 418         if (outpdimm->all_dimms_registered)
 419                 for (j = 0; j < 16; j++) {
 420                         outpdimm->rcw[j] = dimm_params[0].rcw[j];
 421                         for (i = 1; i < number_of_dimms; i++) {
 422                                 if (!dimm_params[i].n_ranks)
 423                                         continue;
 424                                 if (dimm_params[i].rcw[j] != dimm_params[0].rcw[j]) {
 425                                         temp1 = 1;
 426                                         break;
 427                                 }
 428                         }
 429                 }
 430
 431         if (temp1 != 0)
 432                 printf("ERROR: Mix different RDIMM detected!\n");
 433
 434         /* calculate cas latency for all DDR types */
 435         if (compute_cas_latency(dimm_params, outpdimm, number_of_dimms))
 436                 return 1;
 437
 438         /* Determine if all DIMMs ECC capable. */
 439         temp1 = 1;
 440         for (i = 0; i < number_of_dimms; i++) {
 441                 if (dimm_params[i].n_ranks &&
 442                         !(dimm_params[i].edc_config & EDC_ECC)) {
 443                         temp1 = 0;
 444                         break;
 445                 }
 446         }
 447         if (temp1) {
 448                 debug("all DIMMs ECC capable\n");
 449         } else {
 450                 debug("Warning: not all DIMMs ECC capable, cant enable ECC\n");
 451         }
 452         outpdimm->all_dimms_ecc_capable = temp1;
 453
 454         /*
 455          * Compute additive latency.
 456          *
 457          * For DDR1, additive latency should be 0.
 458          *
 459          * For DDR2, with ODT enabled, use "a value" less than ACTTORW,
 460          *      which comes from Trcd, and also note that:
 461          *          add_lat + caslat must be >= 4
 462          *
 463          * For DDR3, we use the AL=0
 464          *
 465          * When to use additive latency for DDR2:
 466          *
 467          * I. Because you are using CL=3 and need to do ODT on writes and
 468          *    want functionality.
 469          *    1. Are you going to use ODT? (Does your board not have
 470          *      additional termination circuitry for DQ, DQS, DQS_,
 471          *      DM, RDQS, RDQS_ for x4/x8 configs?)
 472          *    2. If so, is your lowest supported CL going to be 3?
 473          *    3. If so, then you must set AL=1 because
 474          *
 475          *       WL >= 3 for ODT on writes
 476          *       RL = AL + CL
 477          *       WL = RL - 1
 478          *       ->
 479          *       WL = AL + CL - 1
 480          *       AL + CL - 1 >= 3
 481          *       AL + CL >= 4
 482          *  QED
 483          *
 484          *  RL >= 3 for ODT on reads
 485          *  RL = AL + CL
 486          *
 487          *  Since CL aren't usually less than 2, AL=0 is a minimum,
 488          *  so the WL-derived AL should be the  -- FIXME?
 489          *
 490          * II. Because you are using auto-precharge globally and want to
 491          *     use additive latency (posted CAS) to get more bandwidth.
 492          *     1. Are you going to use auto-precharge mode globally?
 493          *
 494          *        Use addtivie latency and compute AL to be 1 cycle less than
 495          *        tRCD, i.e. the READ or WRITE command is in the cycle
 496          *        immediately following the ACTIVATE command..
 497          *
 498          * III. Because you feel like it or want to do some sort of
 499          *      degraded-performance experiment.
 500          *     1.  Do you just want to use additive latency because you feel
 501          *         like it?
 502          *
 503          * Validation:  AL is less than tRCD, and within the other
 504          * read-to-precharge constraints.
 505          */
 506
 507         additive_latency = 0;
 508
 509 #if defined(CONFIG_SYS_FSL_DDR2)
 510         if ((outpdimm->lowest_common_spd_caslat < 4) &&
 511             (picos_to_mclk(trcd_ps) > outpdimm->lowest_common_spd_caslat)) {
 512                 additive_latency = picos_to_mclk(trcd_ps) -
 513                                    outpdimm->lowest_common_spd_caslat;
 514                 if (mclk_to_picos(additive_latency) > trcd_ps) {
 515                         additive_latency = picos_to_mclk(trcd_ps);
 516                         debug("setting additive_latency to %u because it was "
 517                                 " greater than tRCD_ps\n", additive_latency);
 518                 }
 519         }
 520 #endif
 521
 522         /*
 523          * Validate additive latency
 524          *
 525          * AL <= tRCD(min)
 526          */
 527         if (mclk_to_picos(additive_latency) > trcd_ps) {
 528                 printf("Error: invalid additive latency exceeds tRCD(min).\n");
 529                 return 1;
 530         }
 531
 532         /*
 533          * RL = CL + AL;  RL >= 3 for ODT_RD_CFG to be enabled
 534          * WL = RL - 1;  WL >= 3 for ODT_WL_CFG to be enabled
 535          * ADD_LAT (the register) must be set to a value less
 536          * than ACTTORW if WL = 1, then AL must be set to 1
 537          * RD_TO_PRE (the register) must be set to a minimum
 538          * tRTP + AL if AL is nonzero
 539          */
 540
 541         /*
 542          * Additive latency will be applied only if the memctl option to
 543          * use it.
 544          */
 545         outpdimm->additive_latency = additive_latency;
 546
 547         debug("tCKmin_ps = %u\n", outpdimm->tckmin_x_ps);
 548         debug("trcd_ps   = %u\n", outpdimm->trcd_ps);
 549         debug("trp_ps    = %u\n", outpdimm->trp_ps);
 550         debug("tras_ps   = %u\n", outpdimm->tras_ps);
 551 #ifdef CONFIG_SYS_FSL_DDR4
 552         debug("trfc1_ps = %u\n", trfc1_ps);
 553         debug("trfc2_ps = %u\n", trfc2_ps);
 554         debug("trfc4_ps = %u\n", trfc4_ps);
 555         debug("trrds_ps = %u\n", trrds_ps);
 556         debug("trrdl_ps = %u\n", trrdl_ps);
 557         debug("tccdl_ps = %u\n", tccdl_ps);
 558 #else
 559         debug("twtr_ps   = %u\n", outpdimm->twtr_ps);
 560         debug("trfc_ps   = %u\n", outpdimm->trfc_ps);
 561         debug("trrd_ps   = %u\n", outpdimm->trrd_ps);
 562 #endif
 563         debug("twr_ps    = %u\n", outpdimm->twr_ps);
 564         debug("trc_ps    = %u\n", outpdimm->trc_ps);
 565
 566         return 0;
 567 }