drivers/ddr/fsl/mpc85xx_ddr_gen2.c

   1 /*
   2  * Copyright 2008-2011 Freescale Semiconductor, Inc.
   3  *
   4  * This program is free software; you can redistribute it and/or
   5  * modify it under the terms of the GNU General Public License
   6  * Version 2 as published by the Free Software Foundation.
   7  */
   8
   9 #include <common.h>
  10 #include <asm/io.h>
  11 #include <asm/processor.h>
  12 #include <fsl_ddr_sdram.h>
  13
  14 #if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
  15 #error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
  16 #endif
  17
  18 void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
  19                              unsigned int ctrl_num, int step)
  20 {
  21         unsigned int i;
  22         struct ccsr_ddr __iomem *ddr =
  23                 (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR;
  24
  25 #if defined(CONFIG_SYS_FSL_ERRATUM_NMG_DDR120) && defined(CONFIG_MPC85xx)
  26         ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
  27         uint svr;
  28 #endif
  29
  30         if (ctrl_num) {
  31                 printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
  32                 return;
  33         }
  34
  35 #ifdef CONFIG_SYS_FSL_ERRATUM_NMG_DDR120
  36         /*
  37          * Set the DDR IO receiver to an acceptable bias point.
  38          * Fixed in Rev 2.1.
  39          */
  40         svr = get_svr();
  41         if ((SVR_MAJ(svr) == 1) || IS_SVR_REV(svr, 2, 0)) {
  42                 if ((regs->ddr_sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) ==
  43                    SDRAM_CFG_SDRAM_TYPE_DDR2)
  44                         out_be32(&gur->ddrioovcr, 0x90000000);
  45                 else
  46                         out_be32(&gur->ddrioovcr, 0xA8000000);
  47         }
  48 #endif
  49
  50         for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
  51                 if (i == 0) {
  52                         out_be32(&ddr->cs0_bnds, regs->cs[i].bnds);
  53                         out_be32(&ddr->cs0_config, regs->cs[i].config);
  54
  55                 } else if (i == 1) {
  56                         out_be32(&ddr->cs1_bnds, regs->cs[i].bnds);
  57                         out_be32(&ddr->cs1_config, regs->cs[i].config);
  58
  59                 } else if (i == 2) {
  60                         out_be32(&ddr->cs2_bnds, regs->cs[i].bnds);
  61                         out_be32(&ddr->cs2_config, regs->cs[i].config);
  62
  63                 } else if (i == 3) {
  64                         out_be32(&ddr->cs3_bnds, regs->cs[i].bnds);
  65                         out_be32(&ddr->cs3_config, regs->cs[i].config);
  66                 }
  67         }
  68
  69         out_be32(&ddr->timing_cfg_3, regs->timing_cfg_3);
  70         out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0);
  71         out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
  72         out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
  73         out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
  74         out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
  75         out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
  76         out_be32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl);
  77         out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
  78         out_be32(&ddr->sdram_data_init, regs->ddr_data_init);
  79         out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
  80         out_be32(&ddr->init_addr, regs->ddr_init_addr);
  81         out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
  82
  83         /*
  84          * 200 painful micro-seconds must elapse between
  85          * the DDR clock setup and the DDR config enable.
  86          */
  87         udelay(200);
  88         asm volatile("sync;isync");
  89
  90         out_be32(&ddr->sdram_cfg, regs->ddr_sdram_cfg);
  91
  92         /* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done.  */
  93         while (in_be32(&ddr->sdram_cfg_2) & 0x10) {
  94                 udelay(10000);          /* throttle polling rate */
  95         }
  96 }