]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - drivers/mmc/sunxi_mmc.c
510479516b80432328b26ad827788afd4769f82d
[karo-tx-uboot.git] / drivers / mmc / sunxi_mmc.c
1 /*
2  * (C) Copyright 2007-2011
3  * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
4  * Aaron <leafy.myeh@allwinnertech.com>
5  *
6  * MMC driver for allwinner sunxi platform.
7  *
8  * SPDX-License-Identifier:     GPL-2.0+
9  */
10
11 #include <common.h>
12 #include <malloc.h>
13 #include <mmc.h>
14 #include <asm/io.h>
15 #include <asm/arch/clock.h>
16 #include <asm/arch/cpu.h>
17 #include <asm/arch/gpio.h>
18 #include <asm/arch/mmc.h>
19 #include <asm-generic/gpio.h>
20
21 struct sunxi_mmc_host {
22         unsigned mmc_no;
23         uint32_t *mclkreg;
24         unsigned fatal_err;
25         struct sunxi_mmc *reg;
26         struct mmc_config cfg;
27 };
28
29 /* support 4 mmc hosts */
30 struct sunxi_mmc_host mmc_host[4];
31
32 static int sunxi_mmc_getcd_gpio(int sdc_no)
33 {
34         switch (sdc_no) {
35         case 0: return sunxi_name_to_gpio(CONFIG_MMC0_CD_PIN);
36         case 1: return sunxi_name_to_gpio(CONFIG_MMC1_CD_PIN);
37         case 2: return sunxi_name_to_gpio(CONFIG_MMC2_CD_PIN);
38         case 3: return sunxi_name_to_gpio(CONFIG_MMC3_CD_PIN);
39         }
40         return -1;
41 }
42
43 static int mmc_resource_init(int sdc_no)
44 {
45         struct sunxi_mmc_host *mmchost = &mmc_host[sdc_no];
46         struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
47         int cd_pin, ret = 0;
48
49         debug("init mmc %d resource\n", sdc_no);
50
51         switch (sdc_no) {
52         case 0:
53                 mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC0_BASE;
54                 mmchost->mclkreg = &ccm->sd0_clk_cfg;
55                 break;
56         case 1:
57                 mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC1_BASE;
58                 mmchost->mclkreg = &ccm->sd1_clk_cfg;
59                 break;
60         case 2:
61                 mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC2_BASE;
62                 mmchost->mclkreg = &ccm->sd2_clk_cfg;
63                 break;
64         case 3:
65                 mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC3_BASE;
66                 mmchost->mclkreg = &ccm->sd3_clk_cfg;
67                 break;
68         default:
69                 printf("Wrong mmc number %d\n", sdc_no);
70                 return -1;
71         }
72         mmchost->mmc_no = sdc_no;
73
74         cd_pin = sunxi_mmc_getcd_gpio(sdc_no);
75         if (cd_pin != -1) {
76                 ret = gpio_request(cd_pin, "mmc_cd");
77                 if (!ret)
78                         ret = gpio_direction_input(cd_pin);
79         }
80
81         return ret;
82 }
83
84 static int mmc_set_mod_clk(struct sunxi_mmc_host *mmchost, unsigned int hz)
85 {
86         unsigned int pll, pll_hz, div, n, oclk_dly, sclk_dly;
87
88         if (hz <= 24000000) {
89                 pll = CCM_MMC_CTRL_OSCM24;
90                 pll_hz = 24000000;
91         } else {
92 #ifdef CONFIG_MACH_SUN9I
93                 pll = CCM_MMC_CTRL_PLL_PERIPH0;
94                 pll_hz = clock_get_pll4_periph0();
95 #else
96                 pll = CCM_MMC_CTRL_PLL6;
97                 pll_hz = clock_get_pll6();
98 #endif
99         }
100
101         div = pll_hz / hz;
102         if (pll_hz % hz)
103                 div++;
104
105         n = 0;
106         while (div > 16) {
107                 n++;
108                 div = (div + 1) / 2;
109         }
110
111         if (n > 3) {
112                 printf("mmc %u error cannot set clock to %u\n",
113                        mmchost->mmc_no, hz);
114                 return -1;
115         }
116
117         /* determine delays */
118         if (hz <= 400000) {
119                 oclk_dly = 0;
120                 sclk_dly = 7;
121         } else if (hz <= 25000000) {
122                 oclk_dly = 0;
123                 sclk_dly = 5;
124         } else if (hz <= 50000000) {
125                 oclk_dly = 3;
126                 sclk_dly = 5;
127         } else {
128                 /* hz > 50000000 */
129                 oclk_dly = 2;
130                 sclk_dly = 4;
131         }
132
133         writel(CCM_MMC_CTRL_ENABLE | pll | CCM_MMC_CTRL_SCLK_DLY(sclk_dly) |
134                CCM_MMC_CTRL_N(n) | CCM_MMC_CTRL_OCLK_DLY(oclk_dly) |
135                CCM_MMC_CTRL_M(div), mmchost->mclkreg);
136
137         debug("mmc %u set mod-clk req %u parent %u n %u m %u rate %u\n",
138               mmchost->mmc_no, hz, pll_hz, 1u << n, div,
139               pll_hz / (1u << n) / div);
140
141         return 0;
142 }
143
144 static int mmc_clk_io_on(int sdc_no)
145 {
146         struct sunxi_mmc_host *mmchost = &mmc_host[sdc_no];
147         struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
148
149         debug("init mmc %d clock and io\n", sdc_no);
150
151         /* config ahb clock */
152         setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MMC(sdc_no));
153
154 #if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I) || \
155     defined(CONFIG_MACH_SUN9I)
156         /* unassert reset */
157         setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MMC(sdc_no));
158 #endif
159 #if defined(CONFIG_MACH_SUN9I)
160         /* sun9i has a mmc-common module, also set the gate and reset there */
161         writel(SUNXI_MMC_COMMON_CLK_GATE | SUNXI_MMC_COMMON_RESET,
162                SUNXI_MMC_COMMON_BASE + 4 * sdc_no);
163 #endif
164
165         return mmc_set_mod_clk(mmchost, 24000000);
166 }
167
168 static int mmc_update_clk(struct mmc *mmc)
169 {
170         struct sunxi_mmc_host *mmchost = mmc->priv;
171         unsigned int cmd;
172         unsigned timeout_msecs = 2000;
173
174         cmd = SUNXI_MMC_CMD_START |
175               SUNXI_MMC_CMD_UPCLK_ONLY |
176               SUNXI_MMC_CMD_WAIT_PRE_OVER;
177         writel(cmd, &mmchost->reg->cmd);
178         while (readl(&mmchost->reg->cmd) & SUNXI_MMC_CMD_START) {
179                 if (!timeout_msecs--)
180                         return -1;
181                 udelay(1000);
182         }
183
184         /* clock update sets various irq status bits, clear these */
185         writel(readl(&mmchost->reg->rint), &mmchost->reg->rint);
186
187         return 0;
188 }
189
190 static int mmc_config_clock(struct mmc *mmc)
191 {
192         struct sunxi_mmc_host *mmchost = mmc->priv;
193         unsigned rval = readl(&mmchost->reg->clkcr);
194
195         /* Disable Clock */
196         rval &= ~SUNXI_MMC_CLK_ENABLE;
197         writel(rval, &mmchost->reg->clkcr);
198         if (mmc_update_clk(mmc))
199                 return -1;
200
201         /* Set mod_clk to new rate */
202         if (mmc_set_mod_clk(mmchost, mmc->clock))
203                 return -1;
204
205         /* Clear internal divider */
206         rval &= ~SUNXI_MMC_CLK_DIVIDER_MASK;
207         writel(rval, &mmchost->reg->clkcr);
208
209         /* Re-enable Clock */
210         rval |= SUNXI_MMC_CLK_ENABLE;
211         writel(rval, &mmchost->reg->clkcr);
212         if (mmc_update_clk(mmc))
213                 return -1;
214
215         return 0;
216 }
217
218 static void mmc_set_ios(struct mmc *mmc)
219 {
220         struct sunxi_mmc_host *mmchost = mmc->priv;
221
222         debug("set ios: bus_width: %x, clock: %d\n",
223               mmc->bus_width, mmc->clock);
224
225         /* Change clock first */
226         if (mmc->clock && mmc_config_clock(mmc) != 0) {
227                 mmchost->fatal_err = 1;
228                 return;
229         }
230
231         /* Change bus width */
232         if (mmc->bus_width == 8)
233                 writel(0x2, &mmchost->reg->width);
234         else if (mmc->bus_width == 4)
235                 writel(0x1, &mmchost->reg->width);
236         else
237                 writel(0x0, &mmchost->reg->width);
238 }
239
240 static int mmc_core_init(struct mmc *mmc)
241 {
242         struct sunxi_mmc_host *mmchost = mmc->priv;
243
244         /* Reset controller */
245         writel(SUNXI_MMC_GCTRL_RESET, &mmchost->reg->gctrl);
246         udelay(1000);
247
248         return 0;
249 }
250
251 static int mmc_trans_data_by_cpu(struct mmc *mmc, struct mmc_data *data)
252 {
253         struct sunxi_mmc_host *mmchost = mmc->priv;
254         const int reading = !!(data->flags & MMC_DATA_READ);
255         const uint32_t status_bit = reading ? SUNXI_MMC_STATUS_FIFO_EMPTY :
256                                               SUNXI_MMC_STATUS_FIFO_FULL;
257         unsigned i;
258         unsigned byte_cnt = data->blocksize * data->blocks;
259         unsigned timeout_msecs = 2000;
260         unsigned *buff = (unsigned int *)(reading ? data->dest : data->src);
261
262         /* Always read / write data through the CPU */
263         setbits_le32(&mmchost->reg->gctrl, SUNXI_MMC_GCTRL_ACCESS_BY_AHB);
264
265         for (i = 0; i < (byte_cnt >> 2); i++) {
266                 while (readl(&mmchost->reg->status) & status_bit) {
267                         if (!timeout_msecs--)
268                                 return -1;
269                         udelay(1000);
270                 }
271
272                 if (reading)
273                         buff[i] = readl(&mmchost->reg->fifo);
274                 else
275                         writel(buff[i], &mmchost->reg->fifo);
276         }
277
278         return 0;
279 }
280
281 static int mmc_rint_wait(struct mmc *mmc, unsigned int timeout_msecs,
282                          unsigned int done_bit, const char *what)
283 {
284         struct sunxi_mmc_host *mmchost = mmc->priv;
285         unsigned int status;
286
287         do {
288                 status = readl(&mmchost->reg->rint);
289                 if (!timeout_msecs-- ||
290                     (status & SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT)) {
291                         debug("%s timeout %x\n", what,
292                               status & SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT);
293                         return TIMEOUT;
294                 }
295                 udelay(1000);
296         } while (!(status & done_bit));
297
298         return 0;
299 }
300
301 static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
302                         struct mmc_data *data)
303 {
304         struct sunxi_mmc_host *mmchost = mmc->priv;
305         unsigned int cmdval = SUNXI_MMC_CMD_START;
306         unsigned int timeout_msecs;
307         int error = 0;
308         unsigned int status = 0;
309         unsigned int bytecnt = 0;
310
311         if (mmchost->fatal_err)
312                 return -1;
313         if (cmd->resp_type & MMC_RSP_BUSY)
314                 debug("mmc cmd %d check rsp busy\n", cmd->cmdidx);
315         if (cmd->cmdidx == 12)
316                 return 0;
317
318         if (!cmd->cmdidx)
319                 cmdval |= SUNXI_MMC_CMD_SEND_INIT_SEQ;
320         if (cmd->resp_type & MMC_RSP_PRESENT)
321                 cmdval |= SUNXI_MMC_CMD_RESP_EXPIRE;
322         if (cmd->resp_type & MMC_RSP_136)
323                 cmdval |= SUNXI_MMC_CMD_LONG_RESPONSE;
324         if (cmd->resp_type & MMC_RSP_CRC)
325                 cmdval |= SUNXI_MMC_CMD_CHK_RESPONSE_CRC;
326
327         if (data) {
328                 if ((u32) data->dest & 0x3) {
329                         error = -1;
330                         goto out;
331                 }
332
333                 cmdval |= SUNXI_MMC_CMD_DATA_EXPIRE|SUNXI_MMC_CMD_WAIT_PRE_OVER;
334                 if (data->flags & MMC_DATA_WRITE)
335                         cmdval |= SUNXI_MMC_CMD_WRITE;
336                 if (data->blocks > 1)
337                         cmdval |= SUNXI_MMC_CMD_AUTO_STOP;
338                 writel(data->blocksize, &mmchost->reg->blksz);
339                 writel(data->blocks * data->blocksize, &mmchost->reg->bytecnt);
340         }
341
342         debug("mmc %d, cmd %d(0x%08x), arg 0x%08x\n", mmchost->mmc_no,
343               cmd->cmdidx, cmdval | cmd->cmdidx, cmd->cmdarg);
344         writel(cmd->cmdarg, &mmchost->reg->arg);
345
346         if (!data)
347                 writel(cmdval | cmd->cmdidx, &mmchost->reg->cmd);
348
349         /*
350          * transfer data and check status
351          * STATREG[2] : FIFO empty
352          * STATREG[3] : FIFO full
353          */
354         if (data) {
355                 int ret = 0;
356
357                 bytecnt = data->blocksize * data->blocks;
358                 debug("trans data %d bytes\n", bytecnt);
359                 writel(cmdval | cmd->cmdidx, &mmchost->reg->cmd);
360                 ret = mmc_trans_data_by_cpu(mmc, data);
361                 if (ret) {
362                         error = readl(&mmchost->reg->rint) & \
363                                 SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT;
364                         error = TIMEOUT;
365                         goto out;
366                 }
367         }
368
369         error = mmc_rint_wait(mmc, 1000, SUNXI_MMC_RINT_COMMAND_DONE, "cmd");
370         if (error)
371                 goto out;
372
373         if (data) {
374                 timeout_msecs = 120;
375                 debug("cacl timeout %x msec\n", timeout_msecs);
376                 error = mmc_rint_wait(mmc, timeout_msecs,
377                                       data->blocks > 1 ?
378                                       SUNXI_MMC_RINT_AUTO_COMMAND_DONE :
379                                       SUNXI_MMC_RINT_DATA_OVER,
380                                       "data");
381                 if (error)
382                         goto out;
383         }
384
385         if (cmd->resp_type & MMC_RSP_BUSY) {
386                 timeout_msecs = 2000;
387                 do {
388                         status = readl(&mmchost->reg->status);
389                         if (!timeout_msecs--) {
390                                 debug("busy timeout\n");
391                                 error = TIMEOUT;
392                                 goto out;
393                         }
394                         udelay(1000);
395                 } while (status & SUNXI_MMC_STATUS_CARD_DATA_BUSY);
396         }
397
398         if (cmd->resp_type & MMC_RSP_136) {
399                 cmd->response[0] = readl(&mmchost->reg->resp3);
400                 cmd->response[1] = readl(&mmchost->reg->resp2);
401                 cmd->response[2] = readl(&mmchost->reg->resp1);
402                 cmd->response[3] = readl(&mmchost->reg->resp0);
403                 debug("mmc resp 0x%08x 0x%08x 0x%08x 0x%08x\n",
404                       cmd->response[3], cmd->response[2],
405                       cmd->response[1], cmd->response[0]);
406         } else {
407                 cmd->response[0] = readl(&mmchost->reg->resp0);
408                 debug("mmc resp 0x%08x\n", cmd->response[0]);
409         }
410 out:
411         if (error < 0) {
412                 writel(SUNXI_MMC_GCTRL_RESET, &mmchost->reg->gctrl);
413                 mmc_update_clk(mmc);
414         }
415         writel(0xffffffff, &mmchost->reg->rint);
416         writel(readl(&mmchost->reg->gctrl) | SUNXI_MMC_GCTRL_FIFO_RESET,
417                &mmchost->reg->gctrl);
418
419         return error;
420 }
421
422 static int sunxi_mmc_getcd(struct mmc *mmc)
423 {
424         struct sunxi_mmc_host *mmchost = mmc->priv;
425         int cd_pin;
426
427         cd_pin = sunxi_mmc_getcd_gpio(mmchost->mmc_no);
428         if (cd_pin == -1)
429                 return 1;
430
431         return !gpio_get_value(cd_pin);
432 }
433
434 static const struct mmc_ops sunxi_mmc_ops = {
435         .send_cmd       = mmc_send_cmd,
436         .set_ios        = mmc_set_ios,
437         .init           = mmc_core_init,
438         .getcd          = sunxi_mmc_getcd,
439 };
440
441 struct mmc *sunxi_mmc_init(int sdc_no)
442 {
443         struct mmc_config *cfg = &mmc_host[sdc_no].cfg;
444
445         memset(&mmc_host[sdc_no], 0, sizeof(struct sunxi_mmc_host));
446
447         cfg->name = "SUNXI SD/MMC";
448         cfg->ops  = &sunxi_mmc_ops;
449
450         cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
451         cfg->host_caps = MMC_MODE_4BIT;
452         cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
453 #if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN7I) || \
454     defined(CONFIG_MACH_SUN8I) || defined(CONFIG_MACH_SUN9I)
455         cfg->host_caps |= MMC_MODE_HC;
456 #endif
457         cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
458
459         cfg->f_min = 400000;
460         cfg->f_max = 52000000;
461
462         if (mmc_resource_init(sdc_no) != 0)
463                 return NULL;
464
465         mmc_clk_io_on(sdc_no);
466
467         return mmc_create(cfg, &mmc_host[sdc_no]);
468 }