drivers/mtd/nand/jz4740_nand.c

   1 /*
   2  * Platform independend driver for JZ4740.
   3  *
   4  * Copyright (c) 2007 Ingenic Semiconductor Inc.
   5  * Author: <jlwei@ingenic.cn>
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9 #include <common.h>
  10
  11 #include <nand.h>
  12 #include <asm/io.h>
  13 #include <asm/jz4740.h>
  14
  15 #define JZ_NAND_DATA_ADDR ((void __iomem *)0xB8000000)
  16 #define JZ_NAND_CMD_ADDR (JZ_NAND_DATA_ADDR + 0x8000)
  17 #define JZ_NAND_ADDR_ADDR (JZ_NAND_DATA_ADDR + 0x10000)
  18
  19 #define BIT(x) (1 << (x))
  20 #define JZ_NAND_ECC_CTRL_ENCODING       BIT(3)
  21 #define JZ_NAND_ECC_CTRL_RS             BIT(2)
  22 #define JZ_NAND_ECC_CTRL_RESET          BIT(1)
  23 #define JZ_NAND_ECC_CTRL_ENABLE         BIT(0)
  24
  25 #define EMC_SMCR1_OPT_NAND      0x094c4400
  26 /* Optimize the timing of nand */
  27
  28 static struct jz4740_emc * emc = (struct jz4740_emc *)JZ4740_EMC_BASE;
  29
  30 static struct nand_ecclayout qi_lb60_ecclayout_2gb = {
  31         .eccbytes = 72,
  32         .eccpos = {
  33                 12, 13, 14, 15, 16, 17, 18, 19,
  34                 20, 21, 22, 23, 24, 25, 26, 27,
  35                 28, 29, 30, 31, 32, 33, 34, 35,
  36                 36, 37, 38, 39, 40, 41, 42, 43,
  37                 44, 45, 46, 47, 48, 49, 50, 51,
  38                 52, 53, 54, 55, 56, 57, 58, 59,
  39                 60, 61, 62, 63, 64, 65, 66, 67,
  40                 68, 69, 70, 71, 72, 73, 74, 75,
  41                 76, 77, 78, 79, 80, 81, 82, 83 },
  42         .oobfree = {
  43                 {.offset = 2,
  44                  .length = 10 },
  45                 {.offset = 84,
  46                  .length = 44 } }
  47 };
  48
  49 static int is_reading;
  50
  51 static void jz_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
  52 {
  53         struct nand_chip *this = mtd->priv;
  54         uint32_t reg;
  55
  56         if (ctrl & NAND_CTRL_CHANGE) {
  57                 if (ctrl & NAND_ALE)
  58                         this->IO_ADDR_W = JZ_NAND_ADDR_ADDR;
  59                 else if (ctrl & NAND_CLE)
  60                         this->IO_ADDR_W = JZ_NAND_CMD_ADDR;
  61                 else
  62                         this->IO_ADDR_W = JZ_NAND_DATA_ADDR;
  63
  64                 reg = readl(&emc->nfcsr);
  65                 if (ctrl & NAND_NCE)
  66                         reg |= EMC_NFCSR_NFCE1;
  67                 else
  68                         reg &= ~EMC_NFCSR_NFCE1;
  69                 writel(reg, &emc->nfcsr);
  70         }
  71
  72         if (cmd != NAND_CMD_NONE)
  73                 writeb(cmd, this->IO_ADDR_W);
  74 }
  75
  76 static int jz_nand_device_ready(struct mtd_info *mtd)
  77 {
  78         return (readl(GPIO_PXPIN(2)) & 0x40000000) ? 1 : 0;
  79 }
  80
  81 void board_nand_select_device(struct nand_chip *nand, int chip)
  82 {
  83         /*
  84          * Don't use "chip" to address the NAND device,
  85          * generate the cs from the address where it is encoded.
  86          */
  87 }
  88
  89 static int jz_nand_rs_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
  90                                 u_char *ecc_code)
  91 {
  92         uint32_t status;
  93         int i;
  94
  95         if (is_reading)
  96                 return 0;
  97
  98         do {
  99                 status = readl(&emc->nfints);
 100         } while (!(status & EMC_NFINTS_ENCF));
 101
 102         /* disable ecc */
 103         writel(readl(&emc->nfecr) & ~EMC_NFECR_ECCE, &emc->nfecr);
 104
 105         for (i = 0; i < 9; i++)
 106                 ecc_code[i] = readb(&emc->nfpar[i]);
 107
 108         return 0;
 109 }
 110
 111 static void jz_nand_hwctl(struct mtd_info *mtd, int mode)
 112 {
 113         uint32_t reg;
 114
 115         writel(0, &emc->nfints);
 116         reg = readl(&emc->nfecr);
 117         reg |= JZ_NAND_ECC_CTRL_RESET;
 118         reg |= JZ_NAND_ECC_CTRL_ENABLE;
 119         reg |= JZ_NAND_ECC_CTRL_RS;
 120
 121         switch (mode) {
 122         case NAND_ECC_READ:
 123                 reg &= ~JZ_NAND_ECC_CTRL_ENCODING;
 124                 is_reading = 1;
 125                 break;
 126         case NAND_ECC_WRITE:
 127                 reg |= JZ_NAND_ECC_CTRL_ENCODING;
 128                 is_reading = 0;
 129                 break;
 130         default:
 131                 break;
 132         }
 133
 134         writel(reg, &emc->nfecr);
 135 }
 136
 137 /* Correct 1~9-bit errors in 512-bytes data */
 138 static void jz_rs_correct(unsigned char *dat, int idx, int mask)
 139 {
 140         int i;
 141
 142         idx--;
 143
 144         i = idx + (idx >> 3);
 145         if (i >= 512)
 146                 return;
 147
 148         mask <<= (idx & 0x7);
 149
 150         dat[i] ^= mask & 0xff;
 151         if (i < 511)
 152                 dat[i + 1] ^= (mask >> 8) & 0xff;
 153 }
 154
 155 static int jz_nand_rs_correct_data(struct mtd_info *mtd, u_char *dat,
 156                                    u_char *read_ecc, u_char *calc_ecc)
 157 {
 158         int k;
 159         uint32_t errcnt, index, mask, status;
 160
 161         /* Set PAR values */
 162         const uint8_t all_ff_ecc[] = {
 163                 0xcd, 0x9d, 0x90, 0x58, 0xf4, 0x8b, 0xff, 0xb7, 0x6f };
 164
 165         if (read_ecc[0] == 0xff && read_ecc[1] == 0xff &&
 166             read_ecc[2] == 0xff && read_ecc[3] == 0xff &&
 167             read_ecc[4] == 0xff && read_ecc[5] == 0xff &&
 168             read_ecc[6] == 0xff && read_ecc[7] == 0xff &&
 169             read_ecc[8] == 0xff) {
 170                 for (k = 0; k < 9; k++)
 171                         writeb(all_ff_ecc[k], &emc->nfpar[k]);
 172         } else {
 173                 for (k = 0; k < 9; k++)
 174                         writeb(read_ecc[k], &emc->nfpar[k]);
 175         }
 176         /* Set PRDY */
 177         writel(readl(&emc->nfecr) | EMC_NFECR_PRDY, &emc->nfecr);
 178
 179         /* Wait for completion */
 180         do {
 181                 status = readl(&emc->nfints);
 182         } while (!(status & EMC_NFINTS_DECF));
 183
 184         /* disable ecc */
 185         writel(readl(&emc->nfecr) & ~EMC_NFECR_ECCE, &emc->nfecr);
 186
 187         /* Check decoding */
 188         if (!(status & EMC_NFINTS_ERR))
 189                 return 0;
 190
 191         if (status & EMC_NFINTS_UNCOR) {
 192                 printf("uncorrectable ecc\n");
 193                 return -1;
 194         }
 195
 196         errcnt = (status & EMC_NFINTS_ERRCNT_MASK) >> EMC_NFINTS_ERRCNT_BIT;
 197
 198         switch (errcnt) {
 199         case 4:
 200                 index = (readl(&emc->nferr[3]) & EMC_NFERR_INDEX_MASK) >>
 201                         EMC_NFERR_INDEX_BIT;
 202                 mask = (readl(&emc->nferr[3]) & EMC_NFERR_MASK_MASK) >>
 203                         EMC_NFERR_MASK_BIT;
 204                 jz_rs_correct(dat, index, mask);
 205         case 3:
 206                 index = (readl(&emc->nferr[2]) & EMC_NFERR_INDEX_MASK) >>
 207                         EMC_NFERR_INDEX_BIT;
 208                 mask = (readl(&emc->nferr[2]) & EMC_NFERR_MASK_MASK) >>
 209                         EMC_NFERR_MASK_BIT;
 210                 jz_rs_correct(dat, index, mask);
 211         case 2:
 212                 index = (readl(&emc->nferr[1]) & EMC_NFERR_INDEX_MASK) >>
 213                         EMC_NFERR_INDEX_BIT;
 214                 mask = (readl(&emc->nferr[1]) & EMC_NFERR_MASK_MASK) >>
 215                         EMC_NFERR_MASK_BIT;
 216                 jz_rs_correct(dat, index, mask);
 217         case 1:
 218                 index = (readl(&emc->nferr[0]) & EMC_NFERR_INDEX_MASK) >>
 219                         EMC_NFERR_INDEX_BIT;
 220                 mask = (readl(&emc->nferr[0]) & EMC_NFERR_MASK_MASK) >>
 221                         EMC_NFERR_MASK_BIT;
 222                 jz_rs_correct(dat, index, mask);
 223         default:
 224                 break;
 225         }
 226
 227         return errcnt;
 228 }
 229
 230 /*
 231  * Main initialization routine
 232  */
 233 int board_nand_init(struct nand_chip *nand)
 234 {
 235         uint32_t reg;
 236
 237         reg = readl(&emc->nfcsr);
 238         reg |= EMC_NFCSR_NFE1;  /* EMC setup, Set NFE bit */
 239         writel(reg, &emc->nfcsr);
 240
 241         writel(EMC_SMCR1_OPT_NAND, &emc->smcr[1]);
 242
 243         nand->IO_ADDR_R         = JZ_NAND_DATA_ADDR;
 244         nand->IO_ADDR_W         = JZ_NAND_DATA_ADDR;
 245         nand->cmd_ctrl          = jz_nand_cmd_ctrl;
 246         nand->dev_ready         = jz_nand_device_ready;
 247         nand->ecc.hwctl         = jz_nand_hwctl;
 248         nand->ecc.correct       = jz_nand_rs_correct_data;
 249         nand->ecc.calculate     = jz_nand_rs_calculate_ecc;
 250         nand->ecc.mode          = NAND_ECC_HW_OOB_FIRST;
 251         nand->ecc.size          = CONFIG_SYS_NAND_ECCSIZE;
 252         nand->ecc.bytes         = CONFIG_SYS_NAND_ECCBYTES;
 253         nand->ecc.strength      = 4;
 254         nand->ecc.layout        = &qi_lb60_ecclayout_2gb;
 255         nand->chip_delay        = 50;
 256         nand->bbt_options       |= NAND_BBT_USE_FLASH;
 257
 258         return 0;
 259 }