drivers/mtd/nand/mxc_nand.c

   1 /*
   2  * Copyright 2004-2007 Freescale Semiconductor, Inc.
   3  * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
   4  * Copyright 2009 Ilya Yanok, <yanok@emcraft.com>
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License
   8  * as published by the Free Software Foundation; either version 2
   9  * of the License, or (at your option) any later version.
  10  * This program is distributed in the hope that it will be useful,
  11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13  * GNU General Public License for more details.
  14  *
  15  * You should have received a copy of the GNU General Public License
  16  * along with this program; if not, write to the Free Software
  17  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
  18  * MA 02110-1301, USA.
  19  */
  20
  21 #include <common.h>
  22 #include <nand.h>
  23 #include <linux/err.h>
  24 #include <asm/io.h>
  25 #if defined(CONFIG_MX25) || defined(CONFIG_MX27)
  26 #include <asm/arch/imx-regs.h>
  27 #endif
  28
  29 #define DRIVER_NAME "mxc_nand"
  30
  31 /*
  32  * TODO: Use same register defs here as nand_spl mxc nand driver.
  33  */
  34 /*
  35  * Register map and bit definitions for the Freescale NAND Flash Controller
  36  * present in various i.MX devices.
  37  *
  38  * MX31 and MX27 have version 1 which has
  39  *      4 512 byte main buffers and
  40  *      4 16 byte spare buffers
  41  *      to support up to 2K byte pagesize nand.
  42  *      Reading or writing a 2K page requires 4 FDI/FDO cycles.
  43  *
  44  * MX25 has version 1.1 which has
  45  *      8 512 byte main buffers and
  46  *      8 64 byte spare buffers
  47  *      to support up to 4K byte pagesize nand.
  48  *      Reading or writing a 2K or 4K page requires only 1 FDI/FDO cycle.
  49  *      Also some of registers are moved and/or changed meaning as seen below.
  50  */
  51 #if defined(CONFIG_MX31) || defined(CONFIG_MX27)
  52 #define MXC_NFC_V1
  53 #elif defined(CONFIG_MX25)
  54 #define MXC_NFC_V1_1
  55 #else
  56 #warning "MXC NFC version not defined"
  57 #endif
  58
  59 #if defined(MXC_NFC_V1)
  60 #define NAND_MXC_NR_BUFS                4
  61 #define NAND_MXC_SPARE_BUF_SIZE         16
  62 #define NAND_MXC_REG_OFFSET             0xe00
  63 #define is_mxc_nfc_11()                 0
  64 #elif defined(MXC_NFC_V1_1)
  65 #define NAND_MXC_NR_BUFS                8
  66 #define NAND_MXC_SPARE_BUF_SIZE         64
  67 #define NAND_MXC_REG_OFFSET             0x1e00
  68 #define is_mxc_nfc_11()                 1
  69 #else
  70 #error "define CONFIG_NAND_MXC_VXXX to use mtd mxc nand driver"
  71 #endif
  72 struct nfc_regs {
  73         uint8_t main_area[NAND_MXC_NR_BUFS][0x200];
  74         uint8_t spare_area[NAND_MXC_NR_BUFS][NAND_MXC_SPARE_BUF_SIZE];
  75         /*
  76          * reserved size is offset of nfc registers
  77          * minus total main and spare sizes
  78          */
  79         uint8_t reserved1[NAND_MXC_REG_OFFSET
  80                 - NAND_MXC_NR_BUFS * (512 + NAND_MXC_SPARE_BUF_SIZE)];
  81 #if defined(MXC_NFC_V1)
  82         uint16_t nfc_buf_size;
  83         uint16_t reserved2;
  84         uint16_t nfc_buf_addr;
  85         uint16_t nfc_flash_addr;
  86         uint16_t nfc_flash_cmd;
  87         uint16_t nfc_config;
  88         uint16_t nfc_ecc_status_result;
  89         uint16_t nfc_rsltmain_area;
  90         uint16_t nfc_rsltspare_area;
  91         uint16_t nfc_wrprot;
  92         uint16_t nfc_unlockstart_blkaddr;
  93         uint16_t nfc_unlockend_blkaddr;
  94         uint16_t nfc_nf_wrprst;
  95         uint16_t nfc_config1;
  96         uint16_t nfc_config2;
  97 #elif defined(MXC_NFC_V1_1)
  98         uint16_t reserved2[2];
  99         uint16_t nfc_buf_addr;
 100         uint16_t nfc_flash_addr;
 101         uint16_t nfc_flash_cmd;
 102         uint16_t nfc_config;
 103         uint16_t nfc_ecc_status_result;
 104         uint16_t nfc_ecc_status_result2;
 105         uint16_t nfc_spare_area_size;
 106         uint16_t nfc_wrprot;
 107         uint16_t reserved3[2];
 108         uint16_t nfc_nf_wrprst;
 109         uint16_t nfc_config1;
 110         uint16_t nfc_config2;
 111         uint16_t reserved4;
 112         uint16_t nfc_unlockstart_blkaddr;
 113         uint16_t nfc_unlockend_blkaddr;
 114         uint16_t nfc_unlockstart_blkaddr1;
 115         uint16_t nfc_unlockend_blkaddr1;
 116         uint16_t nfc_unlockstart_blkaddr2;
 117         uint16_t nfc_unlockend_blkaddr2;
 118         uint16_t nfc_unlockstart_blkaddr3;
 119         uint16_t nfc_unlockend_blkaddr3;
 120 #endif
 121 };
 122
 123 /*
 124  * Set INT to 0, FCMD to 1, rest to 0 in NFC_CONFIG2 Register
 125  * for Command operation
 126  */
 127 #define NFC_CMD            0x1
 128
 129 /*
 130  * Set INT to 0, FADD to 1, rest to 0 in NFC_CONFIG2 Register
 131  * for Address operation
 132  */
 133 #define NFC_ADDR           0x2
 134
 135 /*
 136  * Set INT to 0, FDI to 1, rest to 0 in NFC_CONFIG2 Register
 137  * for Input operation
 138  */
 139 #define NFC_INPUT          0x4
 140
 141 /*
 142  * Set INT to 0, FDO to 001, rest to 0 in NFC_CONFIG2 Register
 143  * for Data Output operation
 144  */
 145 #define NFC_OUTPUT         0x8
 146
 147 /*
 148  * Set INT to 0, FD0 to 010, rest to 0 in NFC_CONFIG2 Register
 149  * for Read ID operation
 150  */
 151 #define NFC_ID             0x10
 152
 153 /*
 154  * Set INT to 0, FDO to 100, rest to 0 in NFC_CONFIG2 Register
 155  * for Read Status operation
 156  */
 157 #define NFC_STATUS         0x20
 158
 159 /*
 160  * Set INT to 1, rest to 0 in NFC_CONFIG2 Register for Read
 161  * Status operation
 162  */
 163 #define NFC_INT            0x8000
 164
 165 #ifdef MXC_NFC_V1_1
 166 #define NFC_4_8N_ECC    (1 << 0)
 167 #else
 168 #define NFC_4_8N_ECC    0
 169 #endif
 170 #define NFC_SP_EN           (1 << 2)
 171 #define NFC_ECC_EN          (1 << 3)
 172 #define NFC_BIG             (1 << 5)
 173 #define NFC_RST             (1 << 6)
 174 #define NFC_CE              (1 << 7)
 175 #define NFC_ONE_CYCLE       (1 << 8)
 176
 177 typedef enum {false, true} bool;
 178
 179 struct mxc_nand_host {
 180         struct mtd_info         mtd;
 181         struct nand_chip        *nand;
 182
 183         struct nfc_regs __iomem *regs;
 184         int                     spare_only;
 185         int                     status_request;
 186         int                     pagesize_2k;
 187         int                     clk_act;
 188         uint16_t                col_addr;
 189         unsigned int            page_addr;
 190 };
 191
 192 static struct mxc_nand_host mxc_host;
 193 static struct mxc_nand_host *host = &mxc_host;
 194
 195 /* Define delays in microsec for NAND device operations */
 196 #define TROP_US_DELAY   2000
 197 /* Macros to get byte and bit positions of ECC */
 198 #define COLPOS(x)  ((x) >> 3)
 199 #define BITPOS(x) ((x) & 0xf)
 200
 201 /* Define single bit Error positions in Main & Spare area */
 202 #define MAIN_SINGLEBIT_ERROR 0x4
 203 #define SPARE_SINGLEBIT_ERROR 0x1
 204
 205 /* OOB placement block for use with hardware ecc generation */
 206 #if defined(MXC_NFC_V1)
 207 #ifndef CONFIG_SYS_NAND_LARGEPAGE
 208 static struct nand_ecclayout nand_hw_eccoob = {
 209         .eccbytes = 5,
 210         .eccpos = {6, 7, 8, 9, 10},
 211         .oobfree = { {0, 5}, {11, 5}, }
 212 };
 213 #else
 214 static struct nand_ecclayout nand_hw_eccoob2k = {
 215         .eccbytes = 20,
 216         .eccpos = {
 217                 6, 7, 8, 9, 10,
 218                 22, 23, 24, 25, 26,
 219                 38, 39, 40, 41, 42,
 220                 54, 55, 56, 57, 58,
 221         },
 222         .oobfree = { {2, 4}, {11, 11}, {27, 11}, {43, 11}, {59, 5} },
 223 };
 224 #endif
 225 #elif defined(MXC_NFC_V1_1)
 226 #ifndef CONFIG_SYS_NAND_LARGEPAGE
 227 static struct nand_ecclayout nand_hw_eccoob = {
 228         .eccbytes = 9,
 229         .eccpos = {7, 8, 9, 10, 11, 12, 13, 14, 15},
 230         .oobfree = { {2, 5} }
 231 };
 232 #else
 233 static struct nand_ecclayout nand_hw_eccoob2k = {
 234         .eccbytes = 36,
 235         .eccpos = {
 236                 7, 8, 9, 10, 11, 12, 13, 14, 15,
 237                 23, 24, 25, 26, 27, 28, 29, 30, 31,
 238                 39, 40, 41, 42, 43, 44, 45, 46, 47,
 239                 55, 56, 57, 58, 59, 60, 61, 62, 63,
 240         },
 241         .oobfree = { {2, 5}, {16, 7}, {32, 7}, {48, 7} },
 242 };
 243 #endif
 244 #endif
 245
 246 #ifdef CONFIG_MX27
 247 static int is_16bit_nand(void)
 248 {
 249         struct system_control_regs *sc_regs =
 250                 (struct system_control_regs *)IMX_SYSTEM_CTL_BASE;
 251
 252         if (readl(&sc_regs->fmcr) & NF_16BIT_SEL)
 253                 return 1;
 254         else
 255                 return 0;
 256 }
 257 #elif defined(CONFIG_MX31)
 258 static int is_16bit_nand(void)
 259 {
 260         struct clock_control_regs *sc_regs =
 261                 (struct clock_control_regs *)CCM_BASE;
 262
 263         if (readl(&sc_regs->rcsr) & CCM_RCSR_NF16B)
 264                 return 1;
 265         else
 266                 return 0;
 267 }
 268 #elif defined(CONFIG_MX25)
 269 static int is_16bit_nand(void)
 270 {
 271         struct ccm_regs *ccm =
 272                 (struct ccm_regs *)IMX_CCM_BASE;
 273
 274         if (readl(&ccm->rcsr) & CCM_RCSR_NF_16BIT_SEL)
 275                 return 1;
 276         else
 277                 return 0;
 278 }
 279 #else
 280 #warning "8/16 bit NAND autodetection not supported"
 281 static int is_16bit_nand(void)
 282 {
 283         return 0;
 284 }
 285 #endif
 286
 287 static uint32_t *mxc_nand_memcpy32(uint32_t *dest, uint32_t *source, size_t size)
 288 {
 289         uint32_t *d = dest;
 290
 291         size >>= 2;
 292         while (size--)
 293                 __raw_writel(__raw_readl(source++), d++);
 294         return dest;
 295 }
 296
 297 /*
 298  * This function polls the NANDFC to wait for the basic operation to
 299  * complete by checking the INT bit of config2 register.
 300  */
 301 static void wait_op_done(struct mxc_nand_host *host, int max_retries,
 302                                 uint16_t param)
 303 {
 304         uint32_t tmp;
 305
 306         while (max_retries-- > 0) {
 307                 if (readw(&host->regs->nfc_config2) & NFC_INT) {
 308                         tmp = readw(&host->regs->nfc_config2);
 309                         tmp  &= ~NFC_INT;
 310                         writew(tmp, &host->regs->nfc_config2);
 311                         break;
 312                 }
 313                 udelay(1);
 314         }
 315         if (max_retries < 0) {
 316                 MTDDEBUG(MTD_DEBUG_LEVEL0, "%s(%d): INT not set\n",
 317                                 __func__, param);
 318         }
 319 }
 320
 321 /*
 322  * This function issues the specified command to the NAND device and
 323  * waits for completion.
 324  */
 325 static void send_cmd(struct mxc_nand_host *host, uint16_t cmd)
 326 {
 327         MTDDEBUG(MTD_DEBUG_LEVEL3, "send_cmd(host, 0x%x)\n", cmd);
 328
 329         writew(cmd, &host->regs->nfc_flash_cmd);
 330         writew(NFC_CMD, &host->regs->nfc_config2);
 331
 332         /* Wait for operation to complete */
 333         wait_op_done(host, TROP_US_DELAY, cmd);
 334 }
 335
 336 /*
 337  * This function sends an address (or partial address) to the
 338  * NAND device. The address is used to select the source/destination for
 339  * a NAND command.
 340  */
 341 static void send_addr(struct mxc_nand_host *host, uint16_t addr)
 342 {
 343         MTDDEBUG(MTD_DEBUG_LEVEL3, "send_addr(host, 0x%x)\n", addr);
 344
 345         writew(addr, &host->regs->nfc_flash_addr);
 346         writew(NFC_ADDR, &host->regs->nfc_config2);
 347
 348         /* Wait for operation to complete */
 349         wait_op_done(host, TROP_US_DELAY, addr);
 350 }
 351
 352 /*
 353  * This function requests the NANDFC to initate the transfer
 354  * of data currently in the NANDFC RAM buffer to the NAND device.
 355  */
 356 static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id,
 357                         int spare_only)
 358 {
 359         if (spare_only)
 360                 MTDDEBUG(MTD_DEBUG_LEVEL1, "send_prog_page (%d)\n", spare_only);
 361
 362         if (is_mxc_nfc_11()) {
 363                 int i;
 364                 /*
 365                  *  The controller copies the 64 bytes of spare data from
 366                  *  the first 16 bytes of each of the 4 64 byte spare buffers.
 367                  *  Copy the contiguous data starting in spare_area[0] to
 368                  *  the four spare area buffers.
 369                  */
 370                 for (i = 1; i < 4; i++) {
 371                         void __iomem *src = &host->regs->spare_area[0][i * 16];
 372                         void __iomem *dst = &host->regs->spare_area[i][0];
 373
 374                         mxc_nand_memcpy32(dst, src, 16);
 375                 }
 376         }
 377
 378         writew(buf_id, &host->regs->nfc_buf_addr);
 379
 380         /* Configure spare or page+spare access */
 381         if (!host->pagesize_2k) {
 382                 uint16_t config1 = readw(&host->regs->nfc_config1);
 383                 if (spare_only)
 384                         config1 |= NFC_SP_EN;
 385                 else
 386                         config1 &= ~(NFC_SP_EN);
 387                 writew(config1, &host->regs->nfc_config1);
 388         }
 389
 390         writew(NFC_INPUT, &host->regs->nfc_config2);
 391
 392         /* Wait for operation to complete */
 393         wait_op_done(host, TROP_US_DELAY, spare_only);
 394 }
 395
 396 /*
 397  * Requests NANDFC to initated the transfer of data from the
 398  * NAND device into in the NANDFC ram buffer.
 399  */
 400 static void send_read_page(struct mxc_nand_host *host, uint8_t buf_id,
 401                 int spare_only)
 402 {
 403         MTDDEBUG(MTD_DEBUG_LEVEL3, "send_read_page (%d)\n", spare_only);
 404
 405         writew(buf_id, &host->regs->nfc_buf_addr);
 406
 407         /* Configure spare or page+spare access */
 408         if (!host->pagesize_2k) {
 409                 uint32_t config1 = readw(&host->regs->nfc_config1);
 410                 if (spare_only)
 411                         config1 |= NFC_SP_EN;
 412                 else
 413                         config1 &= ~NFC_SP_EN;
 414                 writew(config1, &host->regs->nfc_config1);
 415         }
 416
 417         writew(NFC_OUTPUT, &host->regs->nfc_config2);
 418
 419         /* Wait for operation to complete */
 420         wait_op_done(host, TROP_US_DELAY, spare_only);
 421
 422         if (is_mxc_nfc_11()) {
 423                 int i;
 424
 425                 /*
 426                  *  The controller copies the 64 bytes of spare data to
 427                  *  the first 16 bytes of each of the 4 spare buffers.
 428                  *  Make the data contiguous starting in spare_area[0].
 429                  */
 430                 for (i = 1; i < 4; i++) {
 431                         void __iomem *src = &host->regs->spare_area[i][0];
 432                         void __iomem *dst = &host->regs->spare_area[0][i * 16];
 433
 434                         mxc_nand_memcpy32(dst, src, 16);
 435                 }
 436         }
 437 }
 438
 439 /* Request the NANDFC to perform a read of the NAND device ID. */
 440 static void send_read_id(struct mxc_nand_host *host)
 441 {
 442         uint16_t tmp;
 443
 444         /* NANDFC buffer 0 is used for device ID output */
 445         writew(0x0, &host->regs->nfc_buf_addr);
 446
 447         /* Read ID into main buffer */
 448         tmp = readw(&host->regs->nfc_config1);
 449         tmp &= ~NFC_SP_EN;
 450         writew(tmp, &host->regs->nfc_config1);
 451
 452         writew(NFC_ID, &host->regs->nfc_config2);
 453
 454         /* Wait for operation to complete */
 455         wait_op_done(host, TROP_US_DELAY, 0);
 456 }
 457
 458 /*
 459  * This function requests the NANDFC to perform a read of the
 460  * NAND device status and returns the current status.
 461  */
 462 static uint16_t get_dev_status(struct mxc_nand_host *host)
 463 {
 464         void __iomem *main_buf = host->regs->main_area[1];
 465         uint32_t store;
 466         uint16_t ret, tmp;
 467         /* Issue status request to NAND device */
 468
 469         /* store the main area1 first word, later do recovery */
 470         store = readl(main_buf);
 471         /* NANDFC buffer 1 is used for device status */
 472         writew(1, &host->regs->nfc_buf_addr);
 473
 474         /* Read status into main buffer */
 475         tmp = readw(&host->regs->nfc_config1);
 476         tmp &= ~NFC_SP_EN;
 477         writew(tmp, &host->regs->nfc_config1);
 478
 479         writew(NFC_STATUS, &host->regs->nfc_config2);
 480
 481         /* Wait for operation to complete */
 482         wait_op_done(host, TROP_US_DELAY, 0);
 483
 484         /*
 485          *  Status is placed in first word of main buffer
 486          * get status, then recovery area 1 data
 487          */
 488         ret = readw(main_buf);
 489         writel(store, main_buf);
 490
 491         return ret;
 492 }
 493
 494 /* This function is used by upper layer to checks if device is ready */
 495 static int mxc_nand_dev_ready(struct mtd_info *mtd)
 496 {
 497         /*
 498          * NFC handles R/B internally. Therefore, this function
 499          * always returns status as ready.
 500          */
 501         return 1;
 502 }
 503
 504 #ifdef CONFIG_MXC_NAND_HWECC
 505 static void mxc_nand_enable_hwecc(struct mtd_info *mtd, int mode)
 506 {
 507         /*
 508          * If HW ECC is enabled, we turn it on during init. There is
 509          * no need to enable again here.
 510          */
 511 }
 512
 513 #ifdef MXC_NFC_V1_1
 514 static void _mxc_nand_enable_hwecc(struct mtd_info *mtd, int on)
 515 {
 516         struct nand_chip *nand_chip = mtd->priv;
 517         struct mxc_nand_host *host = nand_chip->priv;
 518         uint16_t tmp = readw(&host->regs->nfc_config1);
 519
 520         if (on)
 521                 tmp |= NFC_ECC_EN;
 522         else
 523                 tmp &= ~NFC_ECC_EN;
 524         writew(tmp, &host->regs->nfc_config1);
 525 }
 526
 527 static int mxc_nand_read_oob_syndrome(struct mtd_info *mtd,
 528                                       struct nand_chip *chip,
 529                                       int page, int sndcmd)
 530 {
 531         struct mxc_nand_host *host = chip->priv;
 532         uint8_t *buf = chip->oob_poi;
 533         int length = mtd->oobsize;
 534         int eccpitch = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
 535         uint8_t *bufpoi = buf;
 536         int i, toread;
 537
 538         MTDDEBUG(MTD_DEBUG_LEVEL0,
 539                         "%s: Reading OOB area of page %u to oob %p\n",
 540                          __FUNCTION__, host->page_addr, buf);
 541
 542         chip->cmdfunc(mtd, NAND_CMD_READOOB, mtd->writesize, page);
 543         for (i = 0; i < chip->ecc.steps; i++) {
 544                 toread = min_t(int, length, chip->ecc.prepad);
 545                 if (toread) {
 546                         chip->read_buf(mtd, bufpoi, toread);
 547                         bufpoi += toread;
 548                         length -= toread;
 549                 }
 550                 bufpoi += chip->ecc.bytes;
 551                 host->col_addr += chip->ecc.bytes;
 552                 length -= chip->ecc.bytes;
 553
 554                 toread = min_t(int, length, chip->ecc.postpad);
 555                 if (toread) {
 556                         chip->read_buf(mtd, bufpoi, toread);
 557                         bufpoi += toread;
 558                         length -= toread;
 559                 }
 560         }
 561         if (length > 0)
 562                 chip->read_buf(mtd, bufpoi, length);
 563
 564         _mxc_nand_enable_hwecc(mtd, 0);
 565         chip->cmdfunc(mtd, NAND_CMD_READOOB,
 566                         mtd->writesize + chip->ecc.prepad, page);
 567         bufpoi = buf + chip->ecc.prepad;
 568         length = mtd->oobsize - chip->ecc.prepad;
 569         for (i = 0; i < chip->ecc.steps; i++) {
 570                 toread = min_t(int, length, chip->ecc.bytes);
 571                 chip->read_buf(mtd, bufpoi, toread);
 572                 bufpoi += eccpitch;
 573                 length -= eccpitch;
 574                 host->col_addr += chip->ecc.postpad + chip->ecc.prepad;
 575         }
 576         _mxc_nand_enable_hwecc(mtd, 1);
 577         return 1;
 578 }
 579
 580 static int mxc_nand_read_page_raw_syndrome(struct mtd_info *mtd,
 581                                            struct nand_chip *chip,
 582                                            uint8_t *buf,
 583                                            int page)
 584 {
 585         struct mxc_nand_host *host = chip->priv;
 586         int eccsize = chip->ecc.size;
 587         int eccbytes = chip->ecc.bytes;
 588         int eccpitch = eccbytes + chip->ecc.prepad + chip->ecc.postpad;
 589         uint8_t *oob = chip->oob_poi;
 590         int steps, size;
 591         int n;
 592
 593         _mxc_nand_enable_hwecc(mtd, 0);
 594         chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, host->page_addr);
 595
 596         for (n = 0, steps = chip->ecc.steps; steps > 0; n++, steps--) {
 597                 host->col_addr = n * eccsize;
 598                 chip->read_buf(mtd, buf, eccsize);
 599                 buf += eccsize;
 600
 601                 host->col_addr = mtd->writesize + n * eccpitch;
 602                 if (chip->ecc.prepad) {
 603                         chip->read_buf(mtd, oob, chip->ecc.prepad);
 604                         oob += chip->ecc.prepad;
 605                 }
 606
 607                 chip->read_buf(mtd, oob, eccbytes);
 608                 oob += eccbytes;
 609
 610                 if (chip->ecc.postpad) {
 611                         chip->read_buf(mtd, oob, chip->ecc.postpad);
 612                         oob += chip->ecc.postpad;
 613                 }
 614         }
 615
 616         size = mtd->oobsize - (oob - chip->oob_poi);
 617         if (size)
 618                 chip->read_buf(mtd, oob, size);
 619         _mxc_nand_enable_hwecc(mtd, 0);
 620
 621         return 0;
 622 }
 623
 624 static int mxc_nand_read_page_syndrome(struct mtd_info *mtd,
 625                                        struct nand_chip *chip,
 626                                        uint8_t *buf,
 627                                        int page)
 628 {
 629         struct mxc_nand_host *host = chip->priv;
 630         int n, eccsize = chip->ecc.size;
 631         int eccbytes = chip->ecc.bytes;
 632         int eccpitch = eccbytes + chip->ecc.prepad + chip->ecc.postpad;
 633         int eccsteps = chip->ecc.steps;
 634         uint8_t *p = buf;
 635         uint8_t *oob = chip->oob_poi;
 636
 637         MTDDEBUG(MTD_DEBUG_LEVEL1, "Reading page %u to buf %p oob %p\n",
 638               host->page_addr, buf, oob);
 639
 640         /* first read out the data area and the available portion of OOB */
 641         for (n = 0; eccsteps; n++, eccsteps--, p += eccsize) {
 642                 int stat;
 643
 644                 host->col_addr = n * eccsize;
 645
 646                 chip->read_buf(mtd, p, eccsize);
 647
 648                 host->col_addr = mtd->writesize + n * eccpitch;
 649
 650                 if (chip->ecc.prepad) {
 651                         chip->read_buf(mtd, oob, chip->ecc.prepad);
 652                         oob += chip->ecc.prepad;
 653                 }
 654
 655                 stat = chip->ecc.correct(mtd, p, oob, NULL);
 656
 657                 if (stat < 0)
 658                         mtd->ecc_stats.failed++;
 659                 else
 660                         mtd->ecc_stats.corrected += stat;
 661                 oob += eccbytes;
 662
 663                 if (chip->ecc.postpad) {
 664                         chip->read_buf(mtd, oob, chip->ecc.postpad);
 665                         oob += chip->ecc.postpad;
 666                 }
 667         }
 668
 669         /* Calculate remaining oob bytes */
 670         n = mtd->oobsize - (oob - chip->oob_poi);
 671         if (n)
 672                 chip->read_buf(mtd, oob, n);
 673
 674         /* Then switch ECC off and read the OOB area to get the ECC code */
 675         _mxc_nand_enable_hwecc(mtd, 0);
 676         chip->cmdfunc(mtd, NAND_CMD_READOOB, mtd->writesize, host->page_addr);
 677         eccsteps = chip->ecc.steps;
 678         oob = chip->oob_poi + chip->ecc.prepad;
 679         for (n = 0; eccsteps; n++, eccsteps--, p += eccsize) {
 680                 host->col_addr = mtd->writesize +
 681                                  n * eccpitch +
 682                                  chip->ecc.prepad;
 683                 chip->read_buf(mtd, oob, eccbytes);
 684                 oob += eccbytes + chip->ecc.postpad;
 685         }
 686         _mxc_nand_enable_hwecc(mtd, 1);
 687         return 0;
 688 }
 689
 690 static int mxc_nand_write_oob_syndrome(struct mtd_info *mtd,
 691                                        struct nand_chip *chip, int page)
 692 {
 693         struct mxc_nand_host *host = chip->priv;
 694         int eccpitch = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
 695         int length = mtd->oobsize;
 696         int i, len, status, steps = chip->ecc.steps;
 697         const uint8_t *bufpoi = chip->oob_poi;
 698
 699         chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page);
 700         for (i = 0; i < steps; i++) {
 701                 len = min_t(int, length, eccpitch);
 702
 703                 chip->write_buf(mtd, bufpoi, len);
 704                 bufpoi += len;
 705                 length -= len;
 706                 host->col_addr += chip->ecc.prepad + chip->ecc.postpad;
 707         }
 708         if (length > 0)
 709                 chip->write_buf(mtd, bufpoi, length);
 710
 711         chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
 712         status = chip->waitfunc(mtd, chip);
 713         return status & NAND_STATUS_FAIL ? -EIO : 0;
 714 }
 715
 716 static void mxc_nand_write_page_raw_syndrome(struct mtd_info *mtd,
 717                                              struct nand_chip *chip,
 718                                              const uint8_t *buf)
 719 {
 720         struct mxc_nand_host *host = chip->priv;
 721         int eccsize = chip->ecc.size;
 722         int eccbytes = chip->ecc.bytes;
 723         int eccpitch = eccbytes + chip->ecc.prepad + chip->ecc.postpad;
 724         uint8_t *oob = chip->oob_poi;
 725         int steps, size;
 726         int n;
 727
 728         for (n = 0, steps = chip->ecc.steps; steps > 0; n++, steps--) {
 729                 host->col_addr = n * eccsize;
 730                 chip->write_buf(mtd, buf, eccsize);
 731                 buf += eccsize;
 732
 733                 host->col_addr = mtd->writesize + n * eccpitch;
 734
 735                 if (chip->ecc.prepad) {
 736                         chip->write_buf(mtd, oob, chip->ecc.prepad);
 737                         oob += chip->ecc.prepad;
 738                 }
 739
 740                 host->col_addr += eccbytes;
 741                 oob += eccbytes;
 742
 743                 if (chip->ecc.postpad) {
 744                         chip->write_buf(mtd, oob, chip->ecc.postpad);
 745                         oob += chip->ecc.postpad;
 746                 }
 747         }
 748
 749         size = mtd->oobsize - (oob - chip->oob_poi);
 750         if (size)
 751                 chip->write_buf(mtd, oob, size);
 752 }
 753
 754 static void mxc_nand_write_page_syndrome(struct mtd_info *mtd,
 755                                          struct nand_chip *chip,
 756                                          const uint8_t *buf)
 757 {
 758         struct mxc_nand_host *host = chip->priv;
 759         int i, n, eccsize = chip->ecc.size;
 760         int eccbytes = chip->ecc.bytes;
 761         int eccpitch = eccbytes + chip->ecc.prepad + chip->ecc.postpad;
 762         int eccsteps = chip->ecc.steps;
 763         const uint8_t *p = buf;
 764         uint8_t *oob = chip->oob_poi;
 765
 766         chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
 767
 768         for (i = n = 0;
 769              eccsteps;
 770              n++, eccsteps--, i += eccbytes, p += eccsize) {
 771                 host->col_addr = n * eccsize;
 772
 773                 chip->write_buf(mtd, p, eccsize);
 774
 775                 host->col_addr = mtd->writesize + n * eccpitch;
 776
 777                 if (chip->ecc.prepad) {
 778                         chip->write_buf(mtd, oob, chip->ecc.prepad);
 779                         oob += chip->ecc.prepad;
 780                 }
 781
 782                 chip->write_buf(mtd, oob, eccbytes);
 783                 oob += eccbytes;
 784
 785                 if (chip->ecc.postpad) {
 786                         chip->write_buf(mtd, oob, chip->ecc.postpad);
 787                         oob += chip->ecc.postpad;
 788                 }
 789         }
 790
 791         /* Calculate remaining oob bytes */
 792         i = mtd->oobsize - (oob - chip->oob_poi);
 793         if (i)
 794                 chip->write_buf(mtd, oob, i);
 795 }
 796
 797 static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat,
 798                                  u_char *read_ecc, u_char *calc_ecc)
 799 {
 800         struct nand_chip *nand_chip = mtd->priv;
 801         struct mxc_nand_host *host = nand_chip->priv;
 802         uint16_t ecc_status = readw(&host->regs->nfc_ecc_status_result);
 803         int subpages = mtd->writesize / nand_chip->subpagesize;
 804         int pg2blk_shift = nand_chip->phys_erase_shift -
 805                            nand_chip->page_shift;
 806
 807         do {
 808                 if ((ecc_status & 0xf) > 4) {
 809                         static int last_bad = -1;
 810
 811                         if (last_bad != host->page_addr >> pg2blk_shift) {
 812                                 last_bad = host->page_addr >> pg2blk_shift;
 813                                 printk(KERN_DEBUG
 814                                        "MXC_NAND: HWECC uncorrectable ECC error"
 815                                        " in block %u page %u subpage %d\n",
 816                                        last_bad, host->page_addr,
 817                                        mtd->writesize / nand_chip->subpagesize
 818                                             - subpages);
 819                         }
 820                         return -1;
 821                 }
 822                 ecc_status >>= 4;
 823                 subpages--;
 824         } while (subpages > 0);
 825
 826         return 0;
 827 }
 828 #else
 829 #define mxc_nand_read_page_syndrome NULL
 830 #define mxc_nand_read_page_raw_syndrome NULL
 831 #define mxc_nand_read_oob_syndrome NULL
 832 #define mxc_nand_write_page_syndrome NULL
 833 #define mxc_nand_write_page_raw_syndrome NULL
 834 #define mxc_nand_write_oob_syndrome NULL
 835 #define mxc_nfc_11_nand_correct_data NULL
 836
 837 static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat,
 838                                  u_char *read_ecc, u_char *calc_ecc)
 839 {
 840         struct nand_chip *nand_chip = mtd->priv;
 841         struct mxc_nand_host *host = nand_chip->priv;
 842
 843         /*
 844          * 1-Bit errors are automatically corrected in HW.  No need for
 845          * additional correction.  2-Bit errors cannot be corrected by
 846          * HW ECC, so we need to return failure
 847          */
 848         uint16_t ecc_status = readw(&host->regs->nfc_ecc_status_result);
 849
 850         if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) {
 851                 MTDDEBUG(MTD_DEBUG_LEVEL0,
 852                       "MXC_NAND: HWECC uncorrectable 2-bit ECC error\n");
 853                 return -1;
 854         }
 855
 856         return 0;
 857 }
 858 #endif
 859
 860 static int mxc_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
 861                                   u_char *ecc_code)
 862 {
 863         return 0;
 864 }
 865 #endif
 866
 867 static u_char mxc_nand_read_byte(struct mtd_info *mtd)
 868 {
 869         struct nand_chip *nand_chip = mtd->priv;
 870         struct mxc_nand_host *host = nand_chip->priv;
 871         uint8_t ret = 0;
 872         uint16_t col;
 873         uint16_t __iomem *main_buf =
 874                 (uint16_t __iomem *)host->regs->main_area[0];
 875         uint16_t __iomem *spare_buf =
 876                 (uint16_t __iomem *)host->regs->spare_area[0];
 877         union {
 878                 uint16_t word;
 879                 uint8_t bytes[2];
 880         } nfc_word;
 881
 882         /* Check for status request */
 883         if (host->status_request)
 884                 return get_dev_status(host) & 0xFF;
 885
 886         /* Get column for 16-bit access */
 887         col = host->col_addr >> 1;
 888
 889         /* If we are accessing the spare region */
 890         if (host->spare_only)
 891                 nfc_word.word = readw(&spare_buf[col]);
 892         else
 893                 nfc_word.word = readw(&main_buf[col]);
 894
 895         /* Pick upper/lower byte of word from RAM buffer */
 896         ret = nfc_word.bytes[host->col_addr & 0x1];
 897
 898         /* Update saved column address */
 899         if (nand_chip->options & NAND_BUSWIDTH_16)
 900                 host->col_addr += 2;
 901         else
 902                 host->col_addr++;
 903
 904         return ret;
 905 }
 906
 907 static uint16_t mxc_nand_read_word(struct mtd_info *mtd)
 908 {
 909         struct nand_chip *nand_chip = mtd->priv;
 910         struct mxc_nand_host *host = nand_chip->priv;
 911         uint16_t col, ret;
 912         uint16_t __iomem *p;
 913
 914         MTDDEBUG(MTD_DEBUG_LEVEL3,
 915               "mxc_nand_read_word(col = %d)\n", host->col_addr);
 916
 917         col = host->col_addr;
 918         /* Adjust saved column address */
 919         if (col < mtd->writesize && host->spare_only)
 920                 col += mtd->writesize;
 921
 922         if (col < mtd->writesize) {
 923                 p = (uint16_t __iomem *)(host->regs->main_area[0] +
 924                                 (col >> 1));
 925         } else {
 926                 p = (uint16_t __iomem *)(host->regs->spare_area[0] +
 927                                 ((col - mtd->writesize) >> 1));
 928         }
 929
 930         if (col & 1) {
 931                 union {
 932                         uint16_t word;
 933                         uint8_t bytes[2];
 934                 } nfc_word[3];
 935
 936                 nfc_word[0].word = readw(p);
 937                 nfc_word[1].word = readw(p + 1);
 938
 939                 nfc_word[2].bytes[0] = nfc_word[0].bytes[1];
 940                 nfc_word[2].bytes[1] = nfc_word[1].bytes[0];
 941
 942                 ret = nfc_word[2].word;
 943         } else {
 944                 ret = readw(p);
 945         }
 946
 947         /* Update saved column address */
 948         host->col_addr = col + 2;
 949
 950         return ret;
 951 }
 952
 953 /*
 954  * Write data of length len to buffer buf. The data to be
 955  * written on NAND Flash is first copied to RAMbuffer. After the Data Input
 956  * Operation by the NFC, the data is written to NAND Flash
 957  */
 958 static void mxc_nand_write_buf(struct mtd_info *mtd,
 959                                 const u_char *buf, int len)
 960 {
 961         struct nand_chip *nand_chip = mtd->priv;
 962         struct mxc_nand_host *host = nand_chip->priv;
 963         int n, col, i = 0;
 964
 965         MTDDEBUG(MTD_DEBUG_LEVEL3,
 966               "mxc_nand_write_buf(col = %d, len = %d)\n", host->col_addr,
 967               len);
 968
 969         col = host->col_addr;
 970
 971         /* Adjust saved column address */
 972         if (col < mtd->writesize && host->spare_only)
 973                 col += mtd->writesize;
 974
 975         n = mtd->writesize + mtd->oobsize - col;
 976         n = min(len, n);
 977
 978         MTDDEBUG(MTD_DEBUG_LEVEL3,
 979               "%s:%d: col = %d, n = %d\n", __func__, __LINE__, col, n);
 980
 981         while (n > 0) {
 982                 void __iomem *p;
 983
 984                 if (col < mtd->writesize) {
 985                         p = host->regs->main_area[0] + (col & ~3);
 986                 } else {
 987                         p = host->regs->spare_area[0] -
 988                                                 mtd->writesize + (col & ~3);
 989                 }
 990
 991                 MTDDEBUG(MTD_DEBUG_LEVEL3, "%s:%d: p = %p\n", __func__,
 992                       __LINE__, p);
 993
 994                 if (((col | (unsigned long)&buf[i]) & 3) || n < 4) {
 995                         union {
 996                                 uint32_t word;
 997                                 uint8_t bytes[4];
 998                         } nfc_word;
 999
1000                         nfc_word.word = readl(p);
1001                         nfc_word.bytes[col & 3] = buf[i++];
1002                         n--;
1003                         col++;
1004
1005                         writel(nfc_word.word, p);
1006                 } else {
1007                         int m = mtd->writesize - col;
1008
1009                         if (col >= mtd->writesize)
1010                                 m += mtd->oobsize;
1011
1012                         m = min(n, m) & ~3;
1013
1014                         MTDDEBUG(MTD_DEBUG_LEVEL3,
1015                               "%s:%d: n = %d, m = %d, i = %d, col = %d\n",
1016                               __func__,  __LINE__, n, m, i, col);
1017
1018                         mxc_nand_memcpy32(p, (uint32_t *)&buf[i], m);
1019                         col += m;
1020                         i += m;
1021                         n -= m;
1022                 }
1023         }
1024         /* Update saved column address */
1025         host->col_addr = col;
1026 }
1027
1028 /*
1029  * Read the data buffer from the NAND Flash. To read the data from NAND
1030  * Flash first the data output cycle is initiated by the NFC, which copies
1031  * the data to RAMbuffer. This data of length len is then copied to buffer buf.
1032  */
1033 static void mxc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
1034 {
1035         struct nand_chip *nand_chip = mtd->priv;
1036         struct mxc_nand_host *host = nand_chip->priv;
1037         int n, col, i = 0;
1038
1039         MTDDEBUG(MTD_DEBUG_LEVEL3,
1040               "mxc_nand_read_buf(col = %d, len = %d)\n", host->col_addr, len);
1041
1042         col = host->col_addr;
1043
1044         /* Adjust saved column address */
1045         if (col < mtd->writesize && host->spare_only)
1046                 col += mtd->writesize;
1047
1048         n = mtd->writesize + mtd->oobsize - col;
1049         n = min(len, n);
1050
1051         while (n > 0) {
1052                 void __iomem *p;
1053
1054                 if (col < mtd->writesize) {
1055                         p = host->regs->main_area[0] + (col & ~3);
1056                 } else {
1057                         p = host->regs->spare_area[0] -
1058                                         mtd->writesize + (col & ~3);
1059                 }
1060
1061                 if (((col | (int)&buf[i]) & 3) || n < 4) {
1062                         union {
1063                                 uint32_t word;
1064                                 uint8_t bytes[4];
1065                         } nfc_word;
1066
1067                         nfc_word.word = readl(p);
1068                         buf[i++] = nfc_word.bytes[col & 3];
1069                         n--;
1070                         col++;
1071                 } else {
1072                         int m = mtd->writesize - col;
1073
1074                         if (col >= mtd->writesize)
1075                                 m += mtd->oobsize;
1076
1077                         m = min(n, m) & ~3;
1078                         mxc_nand_memcpy32((uint32_t *)&buf[i], p, m);
1079
1080                         col += m;
1081                         i += m;
1082                         n -= m;
1083                 }
1084         }
1085         /* Update saved column address */
1086         host->col_addr = col;
1087 }
1088
1089 /*
1090  * Used by the upper layer to verify the data in NAND Flash
1091  * with the data in the buf.
1092  */
1093 static int mxc_nand_verify_buf(struct mtd_info *mtd,
1094                                 const u_char *buf, int len)
1095 {
1096         u_char tmp[256];
1097         uint bsize;
1098
1099         while (len) {
1100                 bsize = min(len, 256);
1101                 mxc_nand_read_buf(mtd, tmp, bsize);
1102
1103                 if (memcmp(buf, tmp, bsize))
1104                         return 1;
1105
1106                 buf += bsize;
1107                 len -= bsize;
1108         }
1109
1110         return 0;
1111 }
1112
1113 /*
1114  * This function is used by upper layer for select and
1115  * deselect of the NAND chip
1116  */
1117 static void mxc_nand_select_chip(struct mtd_info *mtd, int chip)
1118 {
1119         struct nand_chip *nand_chip = mtd->priv;
1120         struct mxc_nand_host *host = nand_chip->priv;
1121
1122         switch (chip) {
1123         case -1:
1124                 /* TODO: Disable the NFC clock */
1125                 if (host->clk_act)
1126                         host->clk_act = 0;
1127                 break;
1128         case 0:
1129                 /* TODO: Enable the NFC clock */
1130                 if (!host->clk_act)
1131                         host->clk_act = 1;
1132                 break;
1133
1134         default:
1135                 break;
1136         }
1137 }
1138
1139 /*
1140  * Used by the upper layer to write command to NAND Flash for
1141  * different operations to be carried out on NAND Flash
1142  */
1143 void mxc_nand_command(struct mtd_info *mtd, unsigned command,
1144                                 int column, int page_addr)
1145 {
1146         struct nand_chip *nand_chip = mtd->priv;
1147         struct mxc_nand_host *host = nand_chip->priv;
1148
1149         MTDDEBUG(MTD_DEBUG_LEVEL3,
1150               "mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n",
1151               command, column, page_addr);
1152
1153         /* Reset command state information */
1154         host->status_request = false;
1155
1156         /* Command pre-processing step */
1157         switch (command) {
1158
1159         case NAND_CMD_STATUS:
1160                 host->col_addr = 0;
1161                 host->status_request = true;
1162                 break;
1163
1164         case NAND_CMD_READ0:
1165                 host->page_addr = page_addr;
1166                 host->col_addr = column;
1167                 host->spare_only = false;
1168                 break;
1169
1170         case NAND_CMD_READOOB:
1171                 host->col_addr = column;
1172                 host->spare_only = true;
1173                 if (host->pagesize_2k)
1174                         command = NAND_CMD_READ0; /* only READ0 is valid */
1175                 break;
1176
1177         case NAND_CMD_SEQIN:
1178                 if (column >= mtd->writesize) {
1179                         /*
1180                          * before sending SEQIN command for partial write,
1181                          * we need read one page out. FSL NFC does not support
1182                          * partial write. It alway send out 512+ecc+512+ecc ...
1183                          * for large page nand flash. But for small page nand
1184                          * flash, it does support SPARE ONLY operation.
1185                          */
1186                         if (host->pagesize_2k) {
1187                                 /* call ourself to read a page */
1188                                 mxc_nand_command(mtd, NAND_CMD_READ0, 0,
1189                                                 page_addr);
1190                         }
1191
1192                         host->col_addr = column - mtd->writesize;
1193                         host->spare_only = true;
1194
1195                         /* Set program pointer to spare region */
1196                         if (!host->pagesize_2k)
1197                                 send_cmd(host, NAND_CMD_READOOB);
1198                 } else {
1199                         host->spare_only = false;
1200                         host->col_addr = column;
1201
1202                         /* Set program pointer to page start */
1203                         if (!host->pagesize_2k)
1204                                 send_cmd(host, NAND_CMD_READ0);
1205                 }
1206                 break;
1207
1208         case NAND_CMD_PAGEPROG:
1209                 send_prog_page(host, 0, host->spare_only);
1210
1211                 if (host->pagesize_2k && !is_mxc_nfc_11()) {
1212                         /* data in 4 areas datas */
1213                         send_prog_page(host, 1, host->spare_only);
1214                         send_prog_page(host, 2, host->spare_only);
1215                         send_prog_page(host, 3, host->spare_only);
1216                 }
1217
1218                 break;
1219         }
1220
1221         /* Write out the command to the device. */
1222         send_cmd(host, command);
1223
1224         /* Write out column address, if necessary */
1225         if (column != -1) {
1226                 /*
1227                  * MXC NANDFC can only perform full page+spare or
1228                  * spare-only read/write.  When the upper layers
1229                  * layers perform a read/write buf operation,
1230                  * we will used the saved column adress to index into
1231                  * the full page.
1232                  */
1233                 send_addr(host, 0);
1234                 if (host->pagesize_2k)
1235                         /* another col addr cycle for 2k page */
1236                         send_addr(host, 0);
1237         }
1238
1239         /* Write out page address, if necessary */
1240         if (page_addr != -1) {
1241                 u32 page_mask = nand_chip->pagemask;
1242                 do {
1243                         send_addr(host, page_addr & 0xFF);
1244                         page_addr >>= 8;
1245                         page_mask >>= 8;
1246                 } while (page_mask);
1247         }
1248
1249         /* Command post-processing step */
1250         switch (command) {
1251
1252         case NAND_CMD_RESET:
1253                 break;
1254
1255         case NAND_CMD_READOOB:
1256         case NAND_CMD_READ0:
1257                 if (host->pagesize_2k) {
1258                         /* send read confirm command */
1259                         send_cmd(host, NAND_CMD_READSTART);
1260                         /* read for each AREA */
1261                         send_read_page(host, 0, host->spare_only);
1262                         if (!is_mxc_nfc_11()) {
1263                                 send_read_page(host, 1, host->spare_only);
1264                                 send_read_page(host, 2, host->spare_only);
1265                                 send_read_page(host, 3, host->spare_only);
1266                         }
1267                 } else {
1268                         send_read_page(host, 0, host->spare_only);
1269                 }
1270                 break;
1271
1272         case NAND_CMD_READID:
1273                 host->col_addr = 0;
1274                 send_read_id(host);
1275                 break;
1276
1277         case NAND_CMD_PAGEPROG:
1278                 break;
1279
1280         case NAND_CMD_STATUS:
1281                 break;
1282
1283         case NAND_CMD_ERASE2:
1284                 break;
1285         }
1286 }
1287
1288 #ifdef MXC_NFC_V1_1
1289 static void mxc_setup_config1(void)
1290 {
1291         uint16_t tmp;
1292
1293         tmp = readw(&host->regs->nfc_config1);
1294         tmp |= NFC_ONE_CYCLE;
1295         tmp |= NFC_4_8N_ECC;
1296         writew(tmp, &host->regs->nfc_config1);
1297         if (host->pagesize_2k)
1298                 writew(64/2, &host->regs->nfc_spare_area_size);
1299         else
1300                 writew(16/2, &host->regs->nfc_spare_area_size);
1301 }
1302 #else
1303 #define mxc_setup_config1()
1304 #endif
1305
1306 int board_nand_init(struct nand_chip *this)
1307 {
1308         struct mtd_info *mtd;
1309         uint16_t tmp;
1310         int err = 0;
1311
1312         /* structures must be linked */
1313         mtd = &host->mtd;
1314         mtd->priv = this;
1315         host->nand = this;
1316
1317         /* 5 us command delay time */
1318         this->chip_delay = 5;
1319
1320         this->priv = host;
1321         this->dev_ready = mxc_nand_dev_ready;
1322         this->cmdfunc = mxc_nand_command;
1323         this->select_chip = mxc_nand_select_chip;
1324         this->read_byte = mxc_nand_read_byte;
1325         this->read_word = mxc_nand_read_word;
1326         this->write_buf = mxc_nand_write_buf;
1327         this->read_buf = mxc_nand_read_buf;
1328         this->verify_buf = mxc_nand_verify_buf;
1329
1330         host->regs = (struct nfc_regs __iomem *)CONFIG_MXC_NAND_REGS_BASE;
1331         host->clk_act = 1;
1332
1333 #ifdef CONFIG_MXC_NAND_HWECC
1334         this->ecc.calculate = mxc_nand_calculate_ecc;
1335         this->ecc.hwctl = mxc_nand_enable_hwecc;
1336         this->ecc.correct = mxc_nand_correct_data;
1337         if (is_mxc_nfc_11()) {
1338                 this->ecc.mode = NAND_ECC_HW_SYNDROME;
1339                 this->ecc.read_page = mxc_nand_read_page_syndrome;
1340                 this->ecc.read_page_raw = mxc_nand_read_page_raw_syndrome;
1341                 this->ecc.read_oob = mxc_nand_read_oob_syndrome;
1342                 this->ecc.write_page = mxc_nand_write_page_syndrome;
1343                 this->ecc.write_page_raw = mxc_nand_write_page_raw_syndrome;
1344                 this->ecc.write_oob = mxc_nand_write_oob_syndrome;
1345                 this->ecc.bytes = 9;
1346                 this->ecc.prepad = 7;
1347         } else {
1348                 this->ecc.mode = NAND_ECC_HW;
1349         }
1350
1351         host->pagesize_2k = 0;
1352
1353         this->ecc.size = 512;
1354         tmp = readw(&host->regs->nfc_config1);
1355         tmp |= NFC_ECC_EN;
1356         writew(tmp, &host->regs->nfc_config1);
1357 #else
1358         this->ecc.layout = &nand_soft_eccoob;
1359         this->ecc.mode = NAND_ECC_SOFT;
1360         tmp = readw(&host->regs->nfc_config1);
1361         tmp &= ~NFC_ECC_EN;
1362         writew(tmp, &host->regs->nfc_config1);
1363 #endif
1364         /* Reset NAND */
1365         this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
1366
1367         /*
1368          * preset operation
1369          * Unlock the internal RAM Buffer
1370          */
1371         writew(0x2, &host->regs->nfc_config);
1372
1373         /* Blocks to be unlocked */
1374         writew(0x0, &host->regs->nfc_unlockstart_blkaddr);
1375         writew(0x4000, &host->regs->nfc_unlockend_blkaddr);
1376
1377         /* Unlock Block Command for given address range */
1378         writew(0x4, &host->regs->nfc_wrprot);
1379
1380         /* NAND bus width determines access funtions used by upper layer */
1381         if (is_16bit_nand())
1382                 this->options |= NAND_BUSWIDTH_16;
1383
1384 #ifdef CONFIG_SYS_NAND_LARGEPAGE
1385         host->pagesize_2k = 1;
1386         this->ecc.layout = &nand_hw_eccoob2k;
1387 #else
1388         host->pagesize_2k = 0;
1389         this->ecc.layout = &nand_hw_eccoob;
1390 #endif
1391         mxc_setup_config1();
1392         return err;
1393 }