drivers/mtd/spi/sf_probe.c

   1 /*
   2  * SPI flash probing
   3  *
   4  * Copyright (C) 2008 Atmel Corporation
   5  * Copyright (C) 2010 Reinhard Meyer, EMK Elektronik
   6  * Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc.
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #include <common.h>
  12 #include <fdtdec.h>
  13 #include <malloc.h>
  14 #include <spi.h>
  15 #include <spi_flash.h>
  16 #include <asm/io.h>
  17
  18 #include "sf_internal.h"
  19
  20 DECLARE_GLOBAL_DATA_PTR;
  21
  22 /* Read commands array */
  23 static u8 spi_read_cmds_array[] = {
  24         CMD_READ_ARRAY_SLOW,
  25         CMD_READ_DUAL_OUTPUT_FAST,
  26         CMD_READ_DUAL_IO_FAST,
  27         CMD_READ_QUAD_OUTPUT_FAST,
  28         CMD_READ_QUAD_IO_FAST,
  29 };
  30
  31 #ifdef CONFIG_SPI_FLASH_MACRONIX
  32 static int spi_flash_set_qeb_mxic(struct spi_flash *flash)
  33 {
  34         u8 qeb_status;
  35         int ret;
  36
  37         ret = spi_flash_cmd_read_status(flash, &qeb_status);
  38         if (ret < 0)
  39                 return ret;
  40
  41         if (qeb_status & STATUS_QEB_MXIC) {
  42                 debug("SF: mxic: QEB is already set\n");
  43         } else {
  44                 ret = spi_flash_cmd_write_status(flash, STATUS_QEB_MXIC);
  45                 if (ret < 0)
  46                         return ret;
  47         }
  48
  49         return ret;
  50 }
  51 #endif
  52
  53 #if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND)
  54 static int spi_flash_set_qeb_winspan(struct spi_flash *flash)
  55 {
  56         u8 qeb_status;
  57         int ret;
  58
  59         ret = spi_flash_cmd_read_config(flash, &qeb_status);
  60         if (ret < 0)
  61                 return ret;
  62
  63         if (qeb_status & STATUS_QEB_WINSPAN) {
  64                 debug("SF: winspan: QEB is already set\n");
  65         } else {
  66                 ret = spi_flash_cmd_write_config(flash, STATUS_QEB_WINSPAN);
  67                 if (ret < 0)
  68                         return ret;
  69         }
  70
  71         return ret;
  72 }
  73 #endif
  74
  75 static int spi_flash_set_qeb(struct spi_flash *flash, u8 idcode0)
  76 {
  77         switch (idcode0) {
  78 #ifdef CONFIG_SPI_FLASH_MACRONIX
  79         case SPI_FLASH_CFI_MFR_MACRONIX:
  80                 return spi_flash_set_qeb_mxic(flash);
  81 #endif
  82 #if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND)
  83         case SPI_FLASH_CFI_MFR_SPANSION:
  84         case SPI_FLASH_CFI_MFR_WINBOND:
  85                 return spi_flash_set_qeb_winspan(flash);
  86 #endif
  87 #ifdef CONFIG_SPI_FLASH_STMICRO
  88         case SPI_FLASH_CFI_MFR_STMICRO:
  89                 debug("SF: QEB is volatile for %02x flash\n", idcode0);
  90                 return 0;
  91 #endif
  92         default:
  93                 printf("SF: Need set QEB func for %02x flash\n", idcode0);
  94                 return -1;
  95         }
  96 }
  97
  98 static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi,
  99                 u8 *idcode)
 100 {
 101         const struct spi_flash_params *params;
 102         struct spi_flash *flash;
 103         u8 cmd;
 104         u16 jedec = idcode[1] << 8 | idcode[2];
 105         u16 ext_jedec = idcode[3] << 8 | idcode[4];
 106
 107         params = spi_flash_params_table;
 108         for (; params->name != NULL; params++) {
 109                 if ((params->jedec >> 16) == idcode[0]) {
 110                         if ((params->jedec & 0xFFFF) == jedec) {
 111                                 if (params->ext_jedec == 0)
 112                                         break;
 113                                 else if (params->ext_jedec == ext_jedec)
 114                                         break;
 115                         }
 116                 }
 117         }
 118
 119         if (!params->name) {
 120                 printf("SF: Unsupported flash IDs: ");
 121                 printf("manuf %02x, jedec %04x, ext_jedec %04x\n",
 122                        idcode[0], jedec, ext_jedec);
 123                 return NULL;
 124         }
 125
 126         flash = calloc(1, sizeof(*flash));
 127         if (!flash) {
 128                 debug("SF: Failed to allocate spi_flash\n");
 129                 return NULL;
 130         }
 131
 132         /* Assign spi data */
 133         flash->spi = spi;
 134         flash->name = params->name;
 135         flash->memory_map = spi->memory_map;
 136         flash->dual_flash = flash->spi->option;
 137
 138         /* Assign spi_flash ops */
 139         flash->write = spi_flash_cmd_write_ops;
 140 #ifdef CONFIG_SPI_FLASH_SST
 141         if (params->flags & SST_WP)
 142                 flash->write = sst_write_wp;
 143 #endif
 144         flash->erase = spi_flash_cmd_erase_ops;
 145         flash->read = spi_flash_cmd_read_ops;
 146
 147         /* Compute the flash size */
 148         flash->shift = (flash->dual_flash & SF_DUAL_PARALLEL_FLASH) ? 1 : 0;
 149         /*
 150          * The Spansion S25FL032P and S25FL064P have 256b pages, yet use the
 151          * 0x4d00 Extended JEDEC code. The rest of the Spansion flashes with
 152          * the 0x4d00 Extended JEDEC code have 512b pages. All of the others
 153          * have 256b pages.
 154          */
 155         if (ext_jedec == 0x4d00) {
 156                 if ((jedec == 0x0215) || (jedec == 0x216))
 157                         flash->page_size = 256;
 158                 else
 159                         flash->page_size = 512;
 160         } else {
 161                 flash->page_size = 256;
 162         }
 163         flash->page_size <<= flash->shift;
 164         flash->sector_size = params->sector_size << flash->shift;
 165         flash->size = flash->sector_size * params->nr_sectors << flash->shift;
 166 #ifdef CONFIG_SF_DUAL_FLASH
 167         if (flash->dual_flash & SF_DUAL_STACKED_FLASH)
 168                 flash->size <<= 1;
 169 #endif
 170
 171         /* Compute erase sector and command */
 172         if (params->flags & SECT_4K) {
 173                 flash->erase_cmd = CMD_ERASE_4K;
 174                 flash->erase_size = 4096 << flash->shift;
 175         } else if (params->flags & SECT_32K) {
 176                 flash->erase_cmd = CMD_ERASE_32K;
 177                 flash->erase_size = 32768 << flash->shift;
 178         } else {
 179                 flash->erase_cmd = CMD_ERASE_64K;
 180                 flash->erase_size = flash->sector_size;
 181         }
 182
 183         /* Look for the fastest read cmd */
 184         cmd = fls(params->e_rd_cmd & flash->spi->op_mode_rx);
 185         if (cmd) {
 186                 cmd = spi_read_cmds_array[cmd - 1];
 187                 flash->read_cmd = cmd;
 188         } else {
 189                 /* Go for default supported read cmd */
 190                 flash->read_cmd = CMD_READ_ARRAY_FAST;
 191         }
 192
 193         /* Not require to look for fastest only two write cmds yet */
 194         if (params->flags & WR_QPP && flash->spi->op_mode_tx & SPI_OPM_TX_QPP)
 195                 flash->write_cmd = CMD_QUAD_PAGE_PROGRAM;
 196         else
 197                 /* Go for default supported write cmd */
 198                 flash->write_cmd = CMD_PAGE_PROGRAM;
 199
 200         /* Set the quad enable bit - only for quad commands */
 201         if ((flash->read_cmd == CMD_READ_QUAD_OUTPUT_FAST) ||
 202             (flash->read_cmd == CMD_READ_QUAD_IO_FAST) ||
 203             (flash->write_cmd == CMD_QUAD_PAGE_PROGRAM)) {
 204                 if (spi_flash_set_qeb(flash, idcode[0])) {
 205                         debug("SF: Fail to set QEB for %02x\n", idcode[0]);
 206                         return NULL;
 207                 }
 208         }
 209
 210         /* Read dummy_byte: dummy byte is determined based on the
 211          * dummy cycles of a particular command.
 212          * Fast commands - dummy_byte = dummy_cycles/8
 213          * I/O commands- dummy_byte = (dummy_cycles * no.of lines)/8
 214          * For I/O commands except cmd[0] everything goes on no.of lines
 215          * based on particular command but incase of fast commands except
 216          * data all go on single line irrespective of command.
 217          */
 218         switch (flash->read_cmd) {
 219         case CMD_READ_QUAD_IO_FAST:
 220                 flash->dummy_byte = 2;
 221                 break;
 222         case CMD_READ_ARRAY_SLOW:
 223                 flash->dummy_byte = 0;
 224                 break;
 225         default:
 226                 flash->dummy_byte = 1;
 227         }
 228
 229         /* Poll cmd selection */
 230         flash->poll_cmd = CMD_READ_STATUS;
 231 #ifdef CONFIG_SPI_FLASH_STMICRO
 232         if (params->flags & E_FSR)
 233                 flash->poll_cmd = CMD_FLAG_STATUS;
 234 #endif
 235
 236         /* Configure the BAR - discover bank cmds and read current bank */
 237 #ifdef CONFIG_SPI_FLASH_BAR
 238         u8 curr_bank = 0;
 239         if (flash->size > SPI_FLASH_16MB_BOUN) {
 240                 flash->bank_read_cmd = (idcode[0] == 0x01) ?
 241                                         CMD_BANKADDR_BRRD : CMD_EXTNADDR_RDEAR;
 242                 flash->bank_write_cmd = (idcode[0] == 0x01) ?
 243                                         CMD_BANKADDR_BRWR : CMD_EXTNADDR_WREAR;
 244
 245                 if (spi_flash_read_common(flash, &flash->bank_read_cmd, 1,
 246                                           &curr_bank, 1)) {
 247                         debug("SF: fail to read bank addr register\n");
 248                         return NULL;
 249                 }
 250                 flash->bank_curr = curr_bank;
 251         } else {
 252                 flash->bank_curr = curr_bank;
 253         }
 254 #endif
 255
 256         /* Flash powers up read-only, so clear BP# bits */
 257 #if defined(CONFIG_SPI_FLASH_ATMEL) || \
 258         defined(CONFIG_SPI_FLASH_MACRONIX) || \
 259         defined(CONFIG_SPI_FLASH_SST)
 260                 spi_flash_cmd_write_status(flash, 0);
 261 #endif
 262
 263         return flash;
 264 }
 265
 266 #ifdef CONFIG_OF_CONTROL
 267 int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash)
 268 {
 269         fdt_addr_t addr;
 270         fdt_size_t size;
 271         int node;
 272
 273         /* If there is no node, do nothing */
 274         node = fdtdec_next_compatible(blob, 0, COMPAT_GENERIC_SPI_FLASH);
 275         if (node < 0)
 276                 return 0;
 277
 278         addr = fdtdec_get_addr_size(blob, node, "memory-map", &size);
 279         if (addr == FDT_ADDR_T_NONE) {
 280                 debug("%s: Cannot decode address\n", __func__);
 281                 return 0;
 282         }
 283
 284         if (flash->size != size) {
 285                 debug("%s: Memory map must cover entire device\n", __func__);
 286                 return -1;
 287         }
 288         flash->memory_map = map_sysmem(addr, size);
 289
 290         return 0;
 291 }
 292 #endif /* CONFIG_OF_CONTROL */
 293
 294 static struct spi_flash *spi_flash_probe_slave(struct spi_slave *spi)
 295 {
 296         struct spi_flash *flash = NULL;
 297         u8 idcode[5];
 298         int ret;
 299
 300         /* Setup spi_slave */
 301         if (!spi) {
 302                 printf("SF: Failed to set up slave\n");
 303                 return NULL;
 304         }
 305
 306         /* Claim spi bus */
 307         ret = spi_claim_bus(spi);
 308         if (ret) {
 309                 debug("SF: Failed to claim SPI bus: %d\n", ret);
 310                 goto err_claim_bus;
 311         }
 312
 313         /* Read the ID codes */
 314         ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode));
 315         if (ret) {
 316                 printf("SF: Failed to get idcodes\n");
 317                 goto err_read_id;
 318         }
 319
 320 #ifdef DEBUG
 321         printf("SF: Got idcodes\n");
 322         print_buffer(0, idcode, 1, sizeof(idcode), 0);
 323 #endif
 324
 325         /* Validate params from spi_flash_params table */
 326         flash = spi_flash_validate_params(spi, idcode);
 327         if (!flash)
 328                 goto err_read_id;
 329
 330 #ifdef CONFIG_OF_CONTROL
 331         if (spi_flash_decode_fdt(gd->fdt_blob, flash)) {
 332                 debug("SF: FDT decode error\n");
 333                 goto err_read_id;
 334         }
 335 #endif
 336 #ifndef CONFIG_SPL_BUILD
 337         printf("SF: Detected %s with page size ", flash->name);
 338         print_size(flash->page_size, ", erase size ");
 339         print_size(flash->erase_size, ", total ");
 340         print_size(flash->size, "");
 341         if (flash->memory_map)
 342                 printf(", mapped at %p", flash->memory_map);
 343         puts("\n");
 344 #endif
 345 #ifndef CONFIG_SPI_FLASH_BAR
 346         if (((flash->dual_flash == SF_SINGLE_FLASH) &&
 347              (flash->size > SPI_FLASH_16MB_BOUN)) ||
 348              ((flash->dual_flash > SF_SINGLE_FLASH) &&
 349              (flash->size > SPI_FLASH_16MB_BOUN << 1))) {
 350                 puts("SF: Warning - Only lower 16MiB accessible,");
 351                 puts(" Full access #define CONFIG_SPI_FLASH_BAR\n");
 352         }
 353 #endif
 354
 355         /* Release spi bus */
 356         spi_release_bus(spi);
 357
 358         return flash;
 359
 360 err_read_id:
 361         spi_release_bus(spi);
 362 err_claim_bus:
 363         spi_free_slave(spi);
 364         return NULL;
 365 }
 366
 367 struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
 368                 unsigned int max_hz, unsigned int spi_mode)
 369 {
 370         struct spi_slave *spi;
 371
 372         spi = spi_setup_slave(bus, cs, max_hz, spi_mode);
 373         return spi_flash_probe_slave(spi);
 374 }
 375
 376 #ifdef CONFIG_OF_SPI_FLASH
 377 struct spi_flash *spi_flash_probe_fdt(const void *blob, int slave_node,
 378                                       int spi_node)
 379 {
 380         struct spi_slave *spi;
 381
 382         spi = spi_setup_slave_fdt(blob, slave_node, spi_node);
 383         return spi_flash_probe_slave(spi);
 384 }
 385 #endif
 386
 387 void spi_flash_free(struct spi_flash *flash)
 388 {
 389         spi_free_slave(flash->spi);
 390         free(flash);
 391 }