]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - drivers/mtd/spi/spi_spl_load.c
Merge remote-tracking branch 'u-boot/master'
[karo-tx-uboot.git] / drivers / mtd / spi / spi_spl_load.c
1 /*
2  * Copyright (C) 2011 OMICRON electronics GmbH
3  *
4  * based on drivers/mtd/nand/nand_spl_load.c
5  *
6  * Copyright (C) 2011
7  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
8  *
9  * This program is free software; you can redistribute it and/or
10  * modify it under the terms of the GNU General Public License as
11  * published by the Free Software Foundation; either version 2 of
12  * the License, or (at your option) any later version.
13  *
14  * This program is distributed in the hope that it will be useful,
15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17  * GNU General Public License for more details.
18  *
19  * You should have received a copy of the GNU General Public License
20  * along with this program; if not, write to the Free Software
21  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
22  * MA 02111-1307 USA
23  */
24
25 #include <common.h>
26 #include <spi_flash.h>
27 #include <spl.h>
28
29 /*
30  * The main entry for SPI booting. It's necessary that SDRAM is already
31  * configured and available since this code loads the main U-Boot image
32  * from SPI into SDRAM and starts it from there.
33  */
34 void spl_spi_load_image(void)
35 {
36         struct spi_flash *flash;
37         struct image_header *header;
38
39         /*
40          * Load U-Boot image from SPI flash into RAM
41          */
42
43         flash = spi_flash_probe(CONFIG_SPL_SPI_BUS, CONFIG_SPL_SPI_CS,
44                                 CONFIG_SF_DEFAULT_SPEED, SPI_MODE_3);
45         if (!flash) {
46                 puts("SPI probe failed.\n");
47                 hang();
48         }
49
50         /* use CONFIG_SYS_TEXT_BASE as temporary storage area */
51         header = (struct image_header *)(CONFIG_SYS_TEXT_BASE);
52
53         /* Load u-boot, mkimage header is 64 bytes. */
54         spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS, 0x40,
55                         (void *) header);
56         spl_parse_image_header(header);
57         spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS,
58                        spl_image.size, (void *)spl_image.load_addr);
59 }