]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - drivers/net/ne2000_base.h
Merge branch 'master' of git://www.denx.de/git/u-boot-cfi-flash
[karo-tx-uboot.git] / drivers / net / ne2000_base.h
1 /*
2 Ported to U-Boot by Christian Pellegrin <chri@ascensit.com>
3
4 Based on sources from the Linux kernel (pcnet_cs.c, 8390.h) and
5 eCOS(if_dp83902a.c, if_dp83902a.h). Both of these 2 wonderful world
6 are GPL, so this is, of course, GPL.
7
8
9 ==========================================================================
10
11         dev/dp83902a.h
12
13         National Semiconductor DP83902a ethernet chip
14
15 ==========================================================================
16 ####ECOSGPLCOPYRIGHTBEGIN####
17  -------------------------------------------
18  This file is part of eCos, the Embedded Configurable Operating System.
19  Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
20
21  eCos is free software; you can redistribute it and/or modify it under
22  the terms of the GNU General Public License as published by the Free
23  Software Foundation; either version 2 or (at your option) any later version.
24
25  eCos is distributed in the hope that it will be useful, but WITHOUT ANY
26  WARRANTY; without even the implied warranty of MERCHANTABILITY or
27  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
28  for more details.
29
30  You should have received a copy of the GNU General Public License along
31  with eCos; if not, write to the Free Software Foundation, Inc.,
32  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
33
34  As a special exception, if other files instantiate templates or use macros
35  or inline functions from this file, or you compile this file and link it
36  with other works to produce a work based on this file, this file does not
37  by itself cause the resulting work to be covered by the GNU General Public
38  License. However the source code for this file must still be made available
39  in accordance with section (3) of the GNU General Public License.
40
41  This exception does not invalidate any other reasons why a work based on
42  this file might be covered by the GNU General Public License.
43
44  Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
45  at http://sources.redhat.com/ecos/ecos-license/
46  -------------------------------------------
47 ####ECOSGPLCOPYRIGHTEND####
48 ####BSDCOPYRIGHTBEGIN####
49
50  -------------------------------------------
51
52  Portions of this software may have been derived from OpenBSD or other sources,
53  and are covered by the appropriate copyright disclaimers included herein.
54
55  -------------------------------------------
56
57 ####BSDCOPYRIGHTEND####
58 ==========================================================================
59 #####DESCRIPTIONBEGIN####
60
61  Author(s):     gthomas
62  Contributors:  gthomas, jskov
63  Date:          2001-06-13
64  Purpose:
65  Description:
66
67 ####DESCRIPTIONEND####
68
69 ==========================================================================
70
71 */
72
73 /*
74  ------------------------------------------------------------------------
75  Macros for accessing DP registers
76  These can be overridden by the platform header
77 */
78
79 #ifndef __NE2000_BASE_H__
80 #define __NE2000_BASE_H__
81
82 /*
83  * Debugging details
84  *
85  * Set to perms of:
86  * 0 disables all debug output
87  * 1 for process debug output
88  * 2 for added data IO output: get_reg, put_reg
89  * 4 for packet allocation/free output
90  * 8 for only startup status, so we can tell we're installed OK
91  */
92 #if 0
93 #define DEBUG 0xf
94 #else
95 #define DEBUG 0
96 #endif
97
98 #if DEBUG & 1
99 #define DEBUG_FUNCTION() do { printf("%s\n", __FUNCTION__); } while (0)
100 #define DEBUG_LINE() do { printf("%d\n", __LINE__); } while (0)
101 #define PRINTK(args...) printf(args)
102 #else
103 #define DEBUG_FUNCTION() do {} while(0)
104 #define DEBUG_LINE() do {} while(0)
105 #define PRINTK(args...)
106 #endif
107
108 /* timeout for tx/rx in s */
109 #define TOUT 5
110 /* Ether MAC address size */
111 #define ETHER_ADDR_LEN 6
112
113
114 #define CYGHWR_NS_DP83902A_PLF_BROKEN_TX_DMA 1
115 #define CYGACC_CALL_IF_DELAY_US(X) udelay(X)
116
117 /* H/W infomation struct */
118 typedef struct hw_info_t {
119         u32 offset;
120         u8 a0, a1, a2;
121         u32 flags;
122 } hw_info_t;
123
124 typedef struct dp83902a_priv_data {
125         u8* base;
126         u8* data;
127         u8* reset;
128         int tx_next;            /* First free Tx page */
129         int tx_int;             /* Expecting interrupt from this buffer */
130         int rx_next;            /* First free Rx page */
131         int tx1, tx2;           /* Page numbers for Tx buffers */
132         u32 tx1_key, tx2_key;   /* Used to ack when packet sent */
133         int tx1_len, tx2_len;
134         bool tx_started, running, hardwired_esa;
135         u8 esa[6];
136         void* plf_priv;
137
138         /* Buffer allocation */
139         int tx_buf1, tx_buf2;
140         int rx_buf_start, rx_buf_end;
141 } dp83902a_priv_data_t;
142
143 /* ------------------------------------------------------------------------ */
144 /* Register offsets */
145
146 #define DP_CR           0x00
147 #define DP_CLDA0        0x01
148 #define DP_PSTART       0x01    /* write */
149 #define DP_CLDA1        0x02
150 #define DP_PSTOP        0x02    /* write */
151 #define DP_BNDRY        0x03
152 #define DP_TSR          0x04
153 #define DP_TPSR         0x04    /* write */
154 #define DP_NCR          0x05
155 #define DP_TBCL         0x05    /* write */
156 #define DP_FIFO         0x06
157 #define DP_TBCH         0x06    /* write */
158 #define DP_ISR          0x07
159 #define DP_CRDA0        0x08
160 #define DP_RSAL         0x08    /* write */
161 #define DP_CRDA1        0x09
162 #define DP_RSAH         0x09    /* write */
163 #define DP_RBCL         0x0a    /* write */
164 #define DP_RBCH         0x0b    /* write */
165 #define DP_RSR          0x0c
166 #define DP_RCR          0x0c    /* write */
167 #define DP_FER          0x0d
168 #define DP_TCR          0x0d    /* write */
169 #define DP_CER          0x0e
170 #define DP_DCR          0x0e    /* write */
171 #define DP_MISSED       0x0f
172 #define DP_IMR          0x0f    /* write */
173 #define DP_DATAPORT     0x10    /* "eprom" data port */
174
175 #define DP_P1_CR        0x00
176 #define DP_P1_PAR0      0x01
177 #define DP_P1_PAR1      0x02
178 #define DP_P1_PAR2      0x03
179 #define DP_P1_PAR3      0x04
180 #define DP_P1_PAR4      0x05
181 #define DP_P1_PAR5      0x06
182 #define DP_P1_CURP      0x07
183 #define DP_P1_MAR0      0x08
184 #define DP_P1_MAR1      0x09
185 #define DP_P1_MAR2      0x0a
186 #define DP_P1_MAR3      0x0b
187 #define DP_P1_MAR4      0x0c
188 #define DP_P1_MAR5      0x0d
189 #define DP_P1_MAR6      0x0e
190 #define DP_P1_MAR7      0x0f
191
192 #define DP_P2_CR        0x00
193 #define DP_P2_PSTART    0x01
194 #define DP_P2_CLDA0     0x01    /* write */
195 #define DP_P2_PSTOP     0x02
196 #define DP_P2_CLDA1     0x02    /* write */
197 #define DP_P2_RNPP      0x03
198 #define DP_P2_TPSR      0x04
199 #define DP_P2_LNPP      0x05
200 #define DP_P2_ACH       0x06
201 #define DP_P2_ACL       0x07
202 #define DP_P2_RCR       0x0c
203 #define DP_P2_TCR       0x0d
204 #define DP_P2_DCR       0x0e
205 #define DP_P2_IMR       0x0f
206
207 /* Command register - common to all pages */
208
209 #define DP_CR_STOP      0x01    /* Stop: software reset */
210 #define DP_CR_START     0x02    /* Start: initialize device */
211 #define DP_CR_TXPKT     0x04    /* Transmit packet */
212 #define DP_CR_RDMA      0x08    /* Read DMA (recv data from device) */
213 #define DP_CR_WDMA      0x10    /* Write DMA (send data to device) */
214 #define DP_CR_SEND      0x18    /* Send packet */
215 #define DP_CR_NODMA     0x20    /* Remote (or no) DMA */
216 #define DP_CR_PAGE0     0x00    /* Page select */
217 #define DP_CR_PAGE1     0x40
218 #define DP_CR_PAGE2     0x80
219 #define DP_CR_PAGEMSK   0x3F    /* Used to mask out page bits */
220
221 /* Data configuration register */
222
223 #define DP_DCR_WTS      0x01    /* 1=16 bit word transfers */
224 #define DP_DCR_BOS      0x02    /* 1=Little Endian */
225 #define DP_DCR_LAS      0x04    /* 1=Single 32 bit DMA mode */
226 #define DP_DCR_LS       0x08    /* 1=normal mode, 0=loopback */
227 #define DP_DCR_ARM      0x10    /* 0=no send command (program I/O) */
228 #define DP_DCR_FIFO_1   0x00    /* FIFO threshold */
229 #define DP_DCR_FIFO_2   0x20
230 #define DP_DCR_FIFO_4   0x40
231 #define DP_DCR_FIFO_6   0x60
232
233 #define DP_DCR_INIT     (DP_DCR_LS|DP_DCR_FIFO_4)
234
235 /* Interrupt status register */
236
237 #define DP_ISR_RxP      0x01    /* Packet received */
238 #define DP_ISR_TxP      0x02    /* Packet transmitted */
239 #define DP_ISR_RxE      0x04    /* Receive error */
240 #define DP_ISR_TxE      0x08    /* Transmit error */
241 #define DP_ISR_OFLW     0x10    /* Receive overflow */
242 #define DP_ISR_CNT      0x20    /* Tally counters need emptying */
243 #define DP_ISR_RDC      0x40    /* Remote DMA complete */
244 #define DP_ISR_RESET    0x80    /* Device has reset (shutdown, error) */
245
246 /* Interrupt mask register */
247
248 #define DP_IMR_RxP      0x01    /* Packet received */
249 #define DP_IMR_TxP      0x02    /* Packet transmitted */
250 #define DP_IMR_RxE      0x04    /* Receive error */
251 #define DP_IMR_TxE      0x08    /* Transmit error */
252 #define DP_IMR_OFLW     0x10    /* Receive overflow */
253 #define DP_IMR_CNT      0x20    /* Tall counters need emptying */
254 #define DP_IMR_RDC      0x40    /* Remote DMA complete */
255
256 #define DP_IMR_All      0x3F    /* Everything but remote DMA */
257
258 /* Receiver control register */
259
260 #define DP_RCR_SEP      0x01    /* Save bad(error) packets */
261 #define DP_RCR_AR       0x02    /* Accept runt packets */
262 #define DP_RCR_AB       0x04    /* Accept broadcast packets */
263 #define DP_RCR_AM       0x08    /* Accept multicast packets */
264 #define DP_RCR_PROM     0x10    /* Promiscuous mode */
265 #define DP_RCR_MON      0x20    /* Monitor mode - 1=accept no packets */
266
267 /* Receiver status register */
268
269 #define DP_RSR_RxP      0x01    /* Packet received */
270 #define DP_RSR_CRC      0x02    /* CRC error */
271 #define DP_RSR_FRAME    0x04    /* Framing error */
272 #define DP_RSR_FO       0x08    /* FIFO overrun */
273 #define DP_RSR_MISS     0x10    /* Missed packet */
274 #define DP_RSR_PHY      0x20    /* 0=pad match, 1=mad match */
275 #define DP_RSR_DIS      0x40    /* Receiver disabled */
276 #define DP_RSR_DFR      0x80    /* Receiver processing deferred */
277
278 /* Transmitter control register */
279
280 #define DP_TCR_NOCRC    0x01    /* 1=inhibit CRC */
281 #define DP_TCR_NORMAL   0x00    /* Normal transmitter operation */
282 #define DP_TCR_LOCAL    0x02    /* Internal NIC loopback */
283 #define DP_TCR_INLOOP   0x04    /* Full internal loopback */
284 #define DP_TCR_OUTLOOP  0x08    /* External loopback */
285 #define DP_TCR_ATD      0x10    /* Auto transmit disable */
286 #define DP_TCR_OFFSET   0x20    /* Collision offset adjust */
287
288 /* Transmit status register */
289
290 #define DP_TSR_TxP      0x01    /* Packet transmitted */
291 #define DP_TSR_COL      0x04    /* Collision (at least one) */
292 #define DP_TSR_ABT      0x08    /* Aborted because of too many collisions */
293 #define DP_TSR_CRS      0x10    /* Lost carrier */
294 #define DP_TSR_FU       0x20    /* FIFO underrun */
295 #define DP_TSR_CDH      0x40    /* Collision Detect Heartbeat */
296 #define DP_TSR_OWC      0x80    /* Collision outside normal window */
297
298 #define IEEE_8023_MAX_FRAME     1518    /* Largest possible ethernet frame */
299 #define IEEE_8023_MIN_FRAME     64      /* Smallest possible ethernet frame */
300
301 /* Functions */
302 int get_prom(u8* mac_addr, u8* base_addr);
303
304 #endif /* __NE2000_BASE_H__ */