]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - drivers/sound/sound.c
sandbox: Add a simple sound driver
[karo-tx-uboot.git] / drivers / sound / sound.c
1 /*
2  * Copyright (C) 2012 Samsung Electronics
3  * R. Chandrasekar <rcsekar@samsung.com>
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 #include <malloc.h>
9 #include <common.h>
10 #include <asm/io.h>
11 #include <libfdt.h>
12 #include <fdtdec.h>
13 #include <i2c.h>
14 #include <i2s.h>
15 #include <sound.h>
16 #include <asm/arch/sound.h>
17 #include "wm8994.h"
18 #include "max98095.h"
19
20 /* defines */
21 #define SOUND_400_HZ 400
22 #define SOUND_BITS_IN_BYTE 8
23
24 static struct i2stx_info g_i2stx_pri;
25
26 /*
27  * get_sound_i2s_values gets values for i2s parameters
28  *
29  * @param i2stx_info    i2s transmitter transfer param structure
30  * @param blob          FDT blob if enabled else NULL
31  */
32 static int get_sound_i2s_values(struct i2stx_info *i2s, const void *blob)
33 {
34 #ifdef CONFIG_OF_CONTROL
35         int node;
36         int error = 0;
37         int base;
38
39         node = fdt_path_offset(blob, "i2s");
40         if (node <= 0) {
41                 debug("EXYNOS_SOUND: No node for sound in device tree\n");
42                 return -1;
43         }
44
45         /*
46          * Get the pre-defined sound specific values from FDT.
47          * All of these are expected to be correct otherwise
48          * wrong register values in i2s setup parameters
49          * may result in no sound play.
50          */
51         base = fdtdec_get_addr(blob, node, "reg");
52         if (base == FDT_ADDR_T_NONE) {
53                 debug("%s: Missing  i2s base\n", __func__);
54                 return -1;
55         }
56         i2s->base_address = base;
57
58         i2s->audio_pll_clk = fdtdec_get_int(blob,
59                                 node, "samsung,i2s-epll-clock-frequency", -1);
60         error |= i2s->audio_pll_clk;
61         debug("audio_pll_clk = %d\n", i2s->audio_pll_clk);
62         i2s->samplingrate = fdtdec_get_int(blob,
63                                 node, "samsung,i2s-sampling-rate", -1);
64         error |= i2s->samplingrate;
65         debug("samplingrate = %d\n", i2s->samplingrate);
66         i2s->bitspersample = fdtdec_get_int(blob,
67                                 node, "samsung,i2s-bits-per-sample", -1);
68         error |= i2s->bitspersample;
69         debug("bitspersample = %d\n", i2s->bitspersample);
70         i2s->channels = fdtdec_get_int(blob,
71                         node, "samsung,i2s-channels", -1);
72         error |= i2s->channels;
73         debug("channels = %d\n", i2s->channels);
74         i2s->rfs = fdtdec_get_int(blob,
75                                 node, "samsung,i2s-lr-clk-framesize", -1);
76         error |= i2s->rfs;
77         debug("rfs = %d\n", i2s->rfs);
78         i2s->bfs = fdtdec_get_int(blob,
79                                 node, "samsung,i2s-bit-clk-framesize", -1);
80         error |= i2s->bfs;
81         debug("bfs = %d\n", i2s->bfs);
82
83         i2s->id = fdtdec_get_int(blob, node, "samsung,i2s-id", -1);
84         error |= i2s->id;
85         debug("id = %d\n", i2s->id);
86
87         if (error == -1) {
88                 debug("fail to get sound i2s node properties\n");
89                 return -1;
90         }
91 #else
92         i2s->base_address = samsung_get_base_i2s();
93         i2s->audio_pll_clk = I2S_PLL_CLK;
94         i2s->samplingrate = I2S_SAMPLING_RATE;
95         i2s->bitspersample = I2S_BITS_PER_SAMPLE;
96         i2s->channels = I2S_CHANNELS;
97         i2s->rfs = I2S_RFS;
98         i2s->bfs = I2S_BFS;
99         i2s->id = 0;
100 #endif
101         return 0;
102 }
103
104 /*
105  * Init codec
106  *
107  * @param blob          FDT blob
108  * @param pi2s_tx       i2s parameters required by codec
109  * @return              int value, 0 for success
110  */
111 static int codec_init(const void *blob, struct i2stx_info *pi2s_tx)
112 {
113         int ret;
114         const char *codectype;
115 #ifdef CONFIG_OF_CONTROL
116         int node;
117
118         /* Get the node from FDT for sound */
119         node = fdt_path_offset(blob, "i2s");
120         if (node <= 0) {
121                 debug("EXYNOS_SOUND: No node for sound in device tree\n");
122                 debug("node = %d\n", node);
123                 return -1;
124         }
125
126         /*
127          * Get the pre-defined sound codec specific values from FDT.
128          * All of these are expected to be correct otherwise sound
129          * can not be played
130          */
131         codectype = fdt_getprop(blob, node, "samsung,codec-type", NULL);
132         debug("device = %s\n", codectype);
133 #else
134         codectype =  AUDIO_CODEC;
135 #endif
136         if (!strcmp(codectype, "wm8994")) {
137                 /* Check the codec type and initialise the same */
138                 ret = wm8994_init(blob, pi2s_tx->id + 1,
139                                   pi2s_tx->samplingrate,
140                                   (pi2s_tx->samplingrate * (pi2s_tx->rfs)),
141                                   pi2s_tx->bitspersample, pi2s_tx->channels);
142         } else if (!strcmp(codectype, "max98095")) {
143                 ret = max98095_init(blob, pi2s_tx->id + 1,
144                                     pi2s_tx->samplingrate,
145                                     (pi2s_tx->samplingrate * (pi2s_tx->rfs)),
146                                     pi2s_tx->bitspersample);
147         } else {
148                 debug("%s: Unknown codec type %s\n", __func__, codectype);
149                 return -1;
150         }
151
152         if (ret) {
153                 debug("%s: Codec init failed\n", __func__);
154                 return -1;
155         }
156
157         return 0;
158 }
159
160 int sound_init(const void *blob)
161 {
162         int ret;
163         struct i2stx_info *pi2s_tx = &g_i2stx_pri;
164
165         /* Get the I2S Values */
166         if (get_sound_i2s_values(pi2s_tx, blob) < 0) {
167                 debug(" FDT I2S values failed\n");
168                 return -1;
169         }
170
171         if (codec_init(blob, pi2s_tx) < 0) {
172                 debug(" Codec init failed\n");
173                 return -1;
174         }
175
176         ret = i2s_tx_init(pi2s_tx);
177         if (ret) {
178                 debug("%s: Failed to init i2c transmit: ret=%d\n", __func__,
179                       ret);
180                 return ret;
181         }
182
183
184         return ret;
185 }
186
187 /*
188  * Generates square wave sound data for 1 second
189  *
190  * @param data          data buffer pointer
191  * @param size          size of the buffer
192  * @param freq          frequency of the wave
193  */
194 static void sound_prepare_buffer(unsigned short *data, int size, uint32_t freq)
195 {
196         const int sample = 48000;
197         const unsigned short amplitude = 16000; /* between 1 and 32767 */
198         const int period = freq ? sample / freq : 0;
199         const int half = period / 2;
200
201         assert(freq);
202
203         /* Make sure we don't overflow our buffer */
204         if (size % 2)
205                 size--;
206
207         while (size) {
208                 int i;
209                 for (i = 0; size && i < half; i++) {
210                         size -= 2;
211                         *data++ = amplitude;
212                         *data++ = amplitude;
213                 }
214                 for (i = 0; size && i < period - half; i++) {
215                         size -= 2;
216                         *data++ = -amplitude;
217                         *data++ = -amplitude;
218                 }
219         }
220 }
221
222 int sound_play(uint32_t msec, uint32_t frequency)
223 {
224         unsigned int *data;
225         unsigned long data_size;
226         unsigned int ret = 0;
227
228         /*Buffer length computation */
229         data_size = g_i2stx_pri.samplingrate * g_i2stx_pri.channels;
230         data_size *= (g_i2stx_pri.bitspersample / SOUND_BITS_IN_BYTE);
231         data = malloc(data_size);
232
233         if (data == NULL) {
234                 debug("%s: malloc failed\n", __func__);
235                 return -1;
236         }
237
238         sound_prepare_buffer((unsigned short *)data,
239                              data_size / sizeof(unsigned short), frequency);
240
241         while (msec >= 1000) {
242                 ret = i2s_transfer_tx_data(&g_i2stx_pri, data,
243                                            (data_size / sizeof(int)));
244                 msec -= 1000;
245         }
246         if (msec) {
247                 unsigned long size =
248                         (data_size * msec) / (sizeof(int) * 1000);
249
250                 ret = i2s_transfer_tx_data(&g_i2stx_pri, data, size);
251         }
252
253         free(data);
254
255         return ret;
256 }