]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - drivers/spi/omap3_spi.c
ColdFire: Add Freescale MCF54418TWR ColdFire development board support
[karo-tx-uboot.git] / drivers / spi / omap3_spi.c
1 /*
2  * Copyright (C) 2010 Dirk Behme <dirk.behme@googlemail.com>
3  *
4  * Driver for McSPI controller on OMAP3. Based on davinci_spi.c
5  * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
6  *
7  * Copyright (C) 2007 Atmel Corporation
8  *
9  * Parts taken from linux/drivers/spi/omap2_mcspi.c
10  * Copyright (C) 2005, 2006 Nokia Corporation
11  *
12  * Modified by Ruslan Araslanov <ruslan.araslanov@vitecmm.com>
13  *
14  * See file CREDITS for list of people who contributed to this
15  * project.
16  *
17  * This program is free software; you can redistribute it and/or
18  * modify it under the terms of the GNU General Public License as
19  * published by the Free Software Foundation; either version 2 of
20  * the License, or (at your option) any later version.
21  *
22  * This program is distributed in the hope that it will be useful,
23  * but WITHOUT ANY WARRANTY; without even the implied warranty of
24  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
25  * GNU General Public License for more details.
26  *
27  * You should have received a copy of the GNU General Public License
28  * along with this program; if not, write to the Free Software
29  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
30  * MA 02111-1307 USA
31  *
32  */
33
34 #include <common.h>
35 #include <spi.h>
36 #include <malloc.h>
37 #include <asm/io.h>
38 #include "omap3_spi.h"
39
40 #define WORD_LEN        8
41 #define SPI_WAIT_TIMEOUT 3000000;
42
43 static void spi_reset(struct omap3_spi_slave *ds)
44 {
45         unsigned int tmp;
46
47         writel(OMAP3_MCSPI_SYSCONFIG_SOFTRESET, &ds->regs->sysconfig);
48         do {
49                 tmp = readl(&ds->regs->sysstatus);
50         } while (!(tmp & OMAP3_MCSPI_SYSSTATUS_RESETDONE));
51
52         writel(OMAP3_MCSPI_SYSCONFIG_AUTOIDLE |
53                                  OMAP3_MCSPI_SYSCONFIG_ENAWAKEUP |
54                                  OMAP3_MCSPI_SYSCONFIG_SMARTIDLE,
55                                  &ds->regs->sysconfig);
56
57         writel(OMAP3_MCSPI_WAKEUPENABLE_WKEN, &ds->regs->wakeupenable);
58 }
59
60 void spi_init()
61 {
62         /* do nothing */
63 }
64
65 struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
66                                   unsigned int max_hz, unsigned int mode)
67 {
68         struct omap3_spi_slave  *ds;
69
70         ds = malloc(sizeof(struct omap3_spi_slave));
71         if (!ds) {
72                 printf("SPI error: malloc of SPI structure failed\n");
73                 return NULL;
74         }
75
76         /*
77          * OMAP3 McSPI (MultiChannel SPI) has 4 busses (modules)
78          * with different number of chip selects (CS, channels):
79          * McSPI1 has 4 CS (bus 0, cs 0 - 3)
80          * McSPI2 has 2 CS (bus 1, cs 0 - 1)
81          * McSPI3 has 2 CS (bus 2, cs 0 - 1)
82          * McSPI4 has 1 CS (bus 3, cs 0)
83          */
84
85         switch (bus) {
86         case 0:
87                 ds->regs = (struct mcspi *)OMAP3_MCSPI1_BASE;
88                 break;
89 #ifdef OMAP3_MCSPI2_BASE
90         case 1:
91                 ds->regs = (struct mcspi *)OMAP3_MCSPI2_BASE;
92                 break;
93 #endif
94 #ifdef OMAP3_MCSPI3_BASE 
95         case 2:
96                 ds->regs = (struct mcspi *)OMAP3_MCSPI3_BASE;
97                 break;
98 #endif
99 #ifdef OMAP3_MCSPI4_BASE
100         case 3:
101                 ds->regs = (struct mcspi *)OMAP3_MCSPI4_BASE;
102                 break;
103 #endif
104         default:
105                 printf("SPI error: unsupported bus %i. \
106                         Supported busses 0 - 3\n", bus);
107                 return NULL;
108         }
109         ds->slave.bus = bus;
110
111         if (((bus == 0) && (cs > 3)) ||
112                         ((bus == 1) && (cs > 1)) ||
113                         ((bus == 2) && (cs > 1)) ||
114                         ((bus == 3) && (cs > 0))) {
115                 printf("SPI error: unsupported chip select %i \
116                         on bus %i\n", cs, bus);
117                 return NULL;
118         }
119         ds->slave.cs = cs;
120
121         if (max_hz > OMAP3_MCSPI_MAX_FREQ) {
122                 printf("SPI error: unsupported frequency %i Hz. \
123                         Max frequency is 48 Mhz\n", max_hz);
124                 return NULL;
125         }
126         ds->freq = max_hz;
127
128         if (mode > SPI_MODE_3) {
129                 printf("SPI error: unsupported SPI mode %i\n", mode);
130                 return NULL;
131         }
132         ds->mode = mode;
133
134         return &ds->slave;
135 }
136
137 void spi_free_slave(struct spi_slave *slave)
138 {
139         struct omap3_spi_slave *ds = to_omap3_spi(slave);
140
141         free(ds);
142 }
143
144 int spi_claim_bus(struct spi_slave *slave)
145 {
146         struct omap3_spi_slave *ds = to_omap3_spi(slave);
147         unsigned int conf, div = 0;
148
149         /* McSPI global module configuration */
150
151         /*
152          * setup when switching from (reset default) slave mode
153          * to single-channel master mode
154          */
155         spi_reset(ds);
156         conf = readl(&ds->regs->modulctrl);
157         conf &= ~(OMAP3_MCSPI_MODULCTRL_STEST | OMAP3_MCSPI_MODULCTRL_MS);
158         conf |= OMAP3_MCSPI_MODULCTRL_SINGLE;
159         writel(conf, &ds->regs->modulctrl);
160
161         /* McSPI individual channel configuration */
162
163         /* Calculate clock divisor. Valid range: 0x0 - 0xC ( /1 - /4096 ) */
164         if (ds->freq) {
165                 while (div <= 0xC && (OMAP3_MCSPI_MAX_FREQ / (1 << div))
166                                          > ds->freq)
167                         div++;
168         } else
169                 div = 0xC;
170
171         conf = readl(&ds->regs->channel[ds->slave.cs].chconf);
172
173         /* standard 4-wire master mode: SCK, MOSI/out, MISO/in, nCS
174          * REVISIT: this controller could support SPI_3WIRE mode.
175          */
176 #ifdef CONFIG_AM33XX
177         /*
178          * The reference design on AM33xx has D0 and D1 wired up opposite
179          * of how it has been done on previous platforms.  We assume that
180          * custom hardware will also follow this convention.
181          */
182         conf &= OMAP3_MCSPI_CHCONF_DPE0;
183         conf |= ~(OMAP3_MCSPI_CHCONF_IS|OMAP3_MCSPI_CHCONF_DPE1);
184 #else
185         conf &= ~(OMAP3_MCSPI_CHCONF_IS|OMAP3_MCSPI_CHCONF_DPE1);
186         conf |= OMAP3_MCSPI_CHCONF_DPE0;
187 #endif
188
189         /* wordlength */
190         conf &= ~OMAP3_MCSPI_CHCONF_WL_MASK;
191         conf |= (WORD_LEN - 1) << 7;
192
193         /* set chipselect polarity; manage with FORCE */
194         if (!(ds->mode & SPI_CS_HIGH))
195                 conf |= OMAP3_MCSPI_CHCONF_EPOL; /* active-low; normal */
196         else
197                 conf &= ~OMAP3_MCSPI_CHCONF_EPOL;
198
199         /* set clock divisor */
200         conf &= ~OMAP3_MCSPI_CHCONF_CLKD_MASK;
201         conf |= div << 2;
202
203         /* set SPI mode 0..3 */
204         if (ds->mode & SPI_CPOL)
205                 conf |= OMAP3_MCSPI_CHCONF_POL;
206         else
207                 conf &= ~OMAP3_MCSPI_CHCONF_POL;
208         if (ds->mode & SPI_CPHA)
209                 conf |= OMAP3_MCSPI_CHCONF_PHA;
210         else
211                 conf &= ~OMAP3_MCSPI_CHCONF_PHA;
212
213         /* Transmit & receive mode */
214         conf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK;
215
216         writel(conf, &ds->regs->channel[ds->slave.cs].chconf);
217
218         return 0;
219 }
220
221 void spi_release_bus(struct spi_slave *slave)
222 {
223         struct omap3_spi_slave *ds = to_omap3_spi(slave);
224
225         /* Reset the SPI hardware */
226         spi_reset(ds);
227 }
228
229 int omap3_spi_write(struct spi_slave *slave, unsigned int len, const u8 *txp,
230                     unsigned long flags)
231 {
232         struct omap3_spi_slave *ds = to_omap3_spi(slave);
233         int i;
234         int timeout = SPI_WAIT_TIMEOUT;
235         int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf);
236
237         if (flags & SPI_XFER_BEGIN)
238                 writel(OMAP3_MCSPI_CHCTRL_EN,
239                        &ds->regs->channel[ds->slave.cs].chctrl);
240
241         chconf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK;
242         chconf |= OMAP3_MCSPI_CHCONF_TRM_TX_ONLY;
243         chconf |= OMAP3_MCSPI_CHCONF_FORCE;
244         writel(chconf, &ds->regs->channel[ds->slave.cs].chconf);
245
246         for (i = 0; i < len; i++) {
247                 /* wait till TX register is empty (TXS == 1) */
248                 while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
249                          OMAP3_MCSPI_CHSTAT_TXS)) {
250                         if (--timeout <= 0) {
251                                 printf("SPI TXS timed out, status=0x%08x\n",
252                                        readl(&ds->regs->channel[ds->slave.cs].chstat));
253                                 return -1;
254                         }
255                 }
256                 /* Write the data */
257                 writel(txp[i], &ds->regs->channel[ds->slave.cs].tx);
258         }
259
260         if (flags & SPI_XFER_END) {
261                 /* wait to finish of transfer */
262                 while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
263                          OMAP3_MCSPI_CHSTAT_EOT));
264
265                 chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
266                 writel(chconf, &ds->regs->channel[ds->slave.cs].chconf);
267
268                 writel(0, &ds->regs->channel[ds->slave.cs].chctrl);
269         }
270         return 0;
271 }
272
273 int omap3_spi_read(struct spi_slave *slave, unsigned int len, u8 *rxp,
274                    unsigned long flags)
275 {
276         struct omap3_spi_slave *ds = to_omap3_spi(slave);
277         int i;
278         int timeout = SPI_WAIT_TIMEOUT;
279         int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf);
280
281         if (flags & SPI_XFER_BEGIN)
282                 writel(OMAP3_MCSPI_CHCTRL_EN,
283                        &ds->regs->channel[ds->slave.cs].chctrl);
284
285         chconf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK;
286         chconf |= OMAP3_MCSPI_CHCONF_TRM_RX_ONLY;
287         chconf |= OMAP3_MCSPI_CHCONF_FORCE;
288         writel(chconf, &ds->regs->channel[ds->slave.cs].chconf);
289
290         writel(0, &ds->regs->channel[ds->slave.cs].tx);
291
292         for (i = 0; i < len; i++) {
293                 /* Wait till RX register contains data (RXS == 1) */
294                 while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
295                          OMAP3_MCSPI_CHSTAT_RXS)) {
296                         if (--timeout <= 0) {
297                                 printf("SPI RXS timed out, status=0x%08x\n",
298                                        readl(&ds->regs->channel[ds->slave.cs].chstat));
299                                 return -1;
300                         }
301                 }
302                 /* Read the data */
303                 rxp[i] = readl(&ds->regs->channel[ds->slave.cs].rx);
304         }
305
306         if (flags & SPI_XFER_END) {
307                 chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
308                 writel(chconf, &ds->regs->channel[ds->slave.cs].chconf);
309
310                 writel(0, &ds->regs->channel[ds->slave.cs].chctrl);
311         }
312
313         return 0;
314 }
315
316 /*McSPI Transmit Receive Mode*/
317 int omap3_spi_txrx(struct spi_slave *slave,
318                 unsigned int len, const u8 *txp, u8 *rxp, unsigned long flags)
319 {
320         struct omap3_spi_slave *ds = to_omap3_spi(slave);
321         int timeout = SPI_WAIT_TIMEOUT;
322         int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf);
323         int irqstatus = readl(&ds->regs->irqstatus);
324         int i=0;
325
326         /*Enable SPI channel*/
327         if (flags & SPI_XFER_BEGIN)
328                 writel(OMAP3_MCSPI_CHCTRL_EN,
329                        &ds->regs->channel[ds->slave.cs].chctrl);
330
331         /*set TRANSMIT-RECEIVE Mode*/
332         chconf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK;
333         chconf |= OMAP3_MCSPI_CHCONF_FORCE;
334         writel(chconf, &ds->regs->channel[ds->slave.cs].chconf);
335
336         /*Shift in and out 1 byte at time*/
337         for (i=0; i < len; i++){
338                 /* Write: wait for TX empty (TXS == 1)*/
339                 irqstatus |= (1<< (4*(ds->slave.bus)));
340                 while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
341                          OMAP3_MCSPI_CHSTAT_TXS)) {
342                         if (--timeout <= 0) {
343                                 printf("SPI TXS timed out, status=0x%08x\n",
344                                        readl(&ds->regs->channel[ds->slave.cs].chstat));
345                                 return -1;
346                         }
347                 }
348                 /* Write the data */
349                 writel(txp[i], &ds->regs->channel[ds->slave.cs].tx);
350
351                 /*Read: wait for RX containing data (RXS == 1)*/
352                 while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
353                          OMAP3_MCSPI_CHSTAT_RXS)) {
354                         if (--timeout <= 0) {
355                                 printf("SPI RXS timed out, status=0x%08x\n",
356                                        readl(&ds->regs->channel[ds->slave.cs].chstat));
357                                 return -1;
358                         }
359                 }
360                 /* Read the data */
361                 rxp[i] = readl(&ds->regs->channel[ds->slave.cs].rx);
362         }
363
364         /*if transfer must be terminated disable the channel*/
365         if (flags & SPI_XFER_END) {
366                 chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
367                 writel(chconf, &ds->regs->channel[ds->slave.cs].chconf);
368
369                 writel(0, &ds->regs->channel[ds->slave.cs].chctrl);
370         }
371
372         return 0;
373 }
374
375 int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
376              const void *dout, void *din, unsigned long flags)
377 {
378         struct omap3_spi_slave *ds = to_omap3_spi(slave);
379         unsigned int    len;
380         const u8        *txp = dout;
381         u8              *rxp = din;
382         int ret = -1;
383
384         if (bitlen % 8)
385                 return -1;
386
387         len = bitlen / 8;
388
389         if (bitlen == 0) {       /* only change CS */
390                 int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf);
391
392                 if (flags & SPI_XFER_BEGIN) {
393                         writel(OMAP3_MCSPI_CHCTRL_EN,
394                                &ds->regs->channel[ds->slave.cs].chctrl);
395                         chconf |= OMAP3_MCSPI_CHCONF_FORCE;
396                         writel(chconf,
397                                &ds->regs->channel[ds->slave.cs].chconf);
398                 }
399                 if (flags & SPI_XFER_END) {
400                         chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
401                         writel(chconf,
402                                &ds->regs->channel[ds->slave.cs].chconf);
403                         writel(0, &ds->regs->channel[ds->slave.cs].chctrl);
404                 }
405                 ret = 0;
406         } else {
407                 if (dout != NULL && din != NULL)
408                         ret = omap3_spi_txrx(slave, len, txp, rxp, flags);
409                 else if (dout != NULL)
410                         ret = omap3_spi_write(slave, len, txp, flags);
411                 else if (din != NULL)
412                         ret = omap3_spi_read(slave, len, rxp, flags);
413         }
414         return ret;
415 }
416
417 int spi_cs_is_valid(unsigned int bus, unsigned int cs)
418 {
419         return 1;
420 }
421
422 void spi_cs_activate(struct spi_slave *slave)
423 {
424 }
425
426 void spi_cs_deactivate(struct spi_slave *slave)
427 {
428 }