drivers/usb/dwc3/ti_usb_phy.c

   1 /**
   2  * ti_usb_phy.c - USB3 and USB3 PHY programming for dwc3
   3  *
   4  * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com
   5  *
   6  * Author: Kishon Vijay Abraham I <kishon@ti.com>
   7  *
   8  * Taken from Linux Kernel v3.16 (drivers/phy/phy-ti-pipe3.c and
   9  * drivers/phy/phy-omap-usb2.c) and ported to uboot.
  10  *
  11  * "commit 56042e : phy: ti-pipe3: Fix suspend/resume and module reload" for
  12  * phy-ti-pipe3.c
  13  *
  14  * "commit eb82a3 : phy: omap-usb2: Balance pm_runtime_enable() on probe failure
  15  * and remove" for phy-omap-usb2.c
  16  *
  17  * SPDX-License-Identifier:     GPL-2.0+
  18  */
  19
  20 #include <common.h>
  21 #include <malloc.h>
  22 #include <ti-usb-phy-uboot.h>
  23 #include <usb/lin_gadget_compat.h>
  24 #include <linux/ioport.h>
  25 #include <asm/io.h>
  26 #include <asm/arch/sys_proto.h>
  27
  28 #include "linux-compat.h"
  29
  30 #define PLL_STATUS              0x00000004
  31 #define PLL_GO                  0x00000008
  32 #define PLL_CONFIGURATION1      0x0000000C
  33 #define PLL_CONFIGURATION2      0x00000010
  34 #define PLL_CONFIGURATION3      0x00000014
  35 #define PLL_CONFIGURATION4      0x00000020
  36
  37 #define PLL_REGM_MASK           0x001FFE00
  38 #define PLL_REGM_SHIFT          0x9
  39 #define PLL_REGM_F_MASK         0x0003FFFF
  40 #define PLL_REGM_F_SHIFT        0x0
  41 #define PLL_REGN_MASK           0x000001FE
  42 #define PLL_REGN_SHIFT          0x1
  43 #define PLL_SELFREQDCO_MASK     0x0000000E
  44 #define PLL_SELFREQDCO_SHIFT    0x1
  45 #define PLL_SD_MASK             0x0003FC00
  46 #define PLL_SD_SHIFT            10
  47 #define SET_PLL_GO              0x1
  48 #define PLL_LDOPWDN             BIT(15)
  49 #define PLL_TICOPWDN            BIT(16)
  50 #define PLL_LOCK                0x2
  51 #define PLL_IDLE                0x1
  52
  53 #define OMAP_CTRL_DEV_PHY_PD                            BIT(0)
  54 #define OMAP_CTRL_USB3_PHY_PWRCTL_CLK_CMD_MASK          0x003FC000
  55 #define OMAP_CTRL_USB3_PHY_PWRCTL_CLK_CMD_SHIFT         0xE
  56
  57 #define OMAP_CTRL_USB3_PHY_PWRCTL_CLK_FREQ_MASK         0xFFC00000
  58 #define OMAP_CTRL_USB3_PHY_PWRCTL_CLK_FREQ_SHIFT        0x16
  59
  60 #define OMAP_CTRL_USB3_PHY_TX_RX_POWERON        0x3
  61 #define OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF       0x0
  62
  63 #define OMAP_CTRL_USB2_PHY_PD                   BIT(28)
  64
  65 #define AM437X_CTRL_USB2_PHY_PD                 BIT(0)
  66 #define AM437X_CTRL_USB2_OTG_PD                 BIT(1)
  67 #define AM437X_CTRL_USB2_OTGVDET_EN             BIT(19)
  68 #define AM437X_CTRL_USB2_OTGSESSEND_EN          BIT(20)
  69
  70 static LIST_HEAD(ti_usb_phy_list);
  71 typedef unsigned int u32;
  72
  73 struct usb3_dpll_params {
  74         u16     m;
  75         u8      n;
  76         u8      freq:3;
  77         u8      sd;
  78         u32     mf;
  79 };
  80
  81 struct usb3_dpll_map {
  82         unsigned long rate;
  83         struct usb3_dpll_params params;
  84         struct usb3_dpll_map *dpll_map;
  85 };
  86
  87 struct ti_usb_phy {
  88         void __iomem *pll_ctrl_base;
  89         void __iomem *usb2_phy_power;
  90         void __iomem *usb3_phy_power;
  91         struct usb3_dpll_map *dpll_map;
  92         struct list_head list;
  93         int index;
  94 };
  95
  96 static struct usb3_dpll_map dpll_map_usb[] = {
  97         {12000000, {1250, 5, 4, 20, 0} },       /* 12 MHz */
  98         {16800000, {3125, 20, 4, 20, 0} },      /* 16.8 MHz */
  99         {19200000, {1172, 8, 4, 20, 65537} },   /* 19.2 MHz */
 100         {20000000, {1000, 7, 4, 10, 0} },       /* 20 MHz */
 101         {26000000, {1250, 12, 4, 20, 0} },      /* 26 MHz */
 102         {38400000, {3125, 47, 4, 20, 92843} },  /* 38.4 MHz */
 103         { },                                    /* Terminator */
 104 };
 105
 106 static inline unsigned int ti_usb3_readl(void __iomem *base, u32 offset)
 107 {
 108         return readl(base + offset);
 109 }
 110
 111 static inline void ti_usb3_writel(void __iomem *base, u32 offset, u32 value)
 112 {
 113         writel(value, base + offset);
 114 }
 115
 116 #ifndef CONFIG_AM43XX
 117 static struct usb3_dpll_params *ti_usb3_get_dpll_params(struct ti_usb_phy *phy)
 118 {
 119         unsigned long rate;
 120         struct usb3_dpll_map *dpll_map = phy->dpll_map;
 121
 122         rate = get_sys_clk_freq();
 123
 124         for (; dpll_map->rate; dpll_map++) {
 125                 if (rate == dpll_map->rate)
 126                         return &dpll_map->params;
 127         }
 128
 129         dev_err(phy->dev, "No DPLL configuration for %lu Hz SYS CLK\n", rate);
 130
 131         return NULL;
 132 }
 133
 134 static int ti_usb3_dpll_wait_lock(struct ti_usb_phy *phy)
 135 {
 136         u32 val;
 137         do {
 138                 val = ti_usb3_readl(phy->pll_ctrl_base, PLL_STATUS);
 139                         if (val & PLL_LOCK)
 140                                 break;
 141         } while (1);
 142
 143         return 0;
 144 }
 145
 146 static int ti_usb3_dpll_program(struct ti_usb_phy *phy)
 147 {
 148         u32                     val;
 149         struct usb3_dpll_params *dpll_params;
 150
 151         if (!phy->pll_ctrl_base)
 152                 return -EINVAL;
 153
 154         dpll_params = ti_usb3_get_dpll_params(phy);
 155         if (!dpll_params)
 156                 return -EINVAL;
 157
 158         val = ti_usb3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
 159         val &= ~PLL_REGN_MASK;
 160         val |= dpll_params->n << PLL_REGN_SHIFT;
 161         ti_usb3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
 162
 163         val = ti_usb3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
 164         val &= ~PLL_SELFREQDCO_MASK;
 165         val |= dpll_params->freq << PLL_SELFREQDCO_SHIFT;
 166         ti_usb3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
 167
 168         val = ti_usb3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
 169         val &= ~PLL_REGM_MASK;
 170         val |= dpll_params->m << PLL_REGM_SHIFT;
 171         ti_usb3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
 172
 173         val = ti_usb3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION4);
 174         val &= ~PLL_REGM_F_MASK;
 175         val |= dpll_params->mf << PLL_REGM_F_SHIFT;
 176         ti_usb3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION4, val);
 177
 178         val = ti_usb3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION3);
 179         val &= ~PLL_SD_MASK;
 180         val |= dpll_params->sd << PLL_SD_SHIFT;
 181         ti_usb3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION3, val);
 182
 183         ti_usb3_writel(phy->pll_ctrl_base, PLL_GO, SET_PLL_GO);
 184
 185         return ti_usb3_dpll_wait_lock(phy);
 186 }
 187 #endif
 188
 189 void ti_usb2_phy_power(struct ti_usb_phy *phy, int on)
 190 {
 191         u32 val;
 192
 193         val = readl(phy->usb2_phy_power);
 194
 195         if (on) {
 196 #ifdef CONFIG_DRA7XX
 197                 val &= ~OMAP_CTRL_DEV_PHY_PD;
 198 #elif defined(CONFIG_AM43XX)
 199                 val &= ~(AM437X_CTRL_USB2_PHY_PD |
 200                          AM437X_CTRL_USB2_OTG_PD);
 201                 val |= (AM437X_CTRL_USB2_OTGVDET_EN |
 202                         AM437X_CTRL_USB2_OTGSESSEND_EN);
 203 #endif
 204         } else {
 205 #ifdef CONFIG_DRA7XX
 206                 val |= OMAP_CTRL_DEV_PHY_PD;
 207 #elif defined(CONFIG_AM43XX)
 208                 val &= ~(AM437X_CTRL_USB2_OTGVDET_EN |
 209                          AM437X_CTRL_USB2_OTGSESSEND_EN);
 210                 val |= (AM437X_CTRL_USB2_PHY_PD |
 211                         AM437X_CTRL_USB2_OTG_PD);
 212 #endif
 213         }
 214         writel(val, phy->usb2_phy_power);
 215 }
 216
 217 #ifndef CONFIG_AM43XX
 218 void ti_usb3_phy_power(struct ti_usb_phy *phy, int on)
 219 {
 220         u32 val;
 221         u32 rate;
 222         rate = get_sys_clk_freq();
 223         rate = rate/1000000;
 224
 225         if (!phy->usb3_phy_power)
 226                 return;
 227
 228         val = readl(phy->usb3_phy_power);
 229         if (on) {
 230                 val &= ~(OMAP_CTRL_USB3_PHY_PWRCTL_CLK_CMD_MASK |
 231                         OMAP_CTRL_USB3_PHY_PWRCTL_CLK_FREQ_MASK);
 232                 val |= (OMAP_CTRL_USB3_PHY_TX_RX_POWERON) <<
 233                         OMAP_CTRL_USB3_PHY_PWRCTL_CLK_CMD_SHIFT;
 234                 val |= rate <<
 235                         OMAP_CTRL_USB3_PHY_PWRCTL_CLK_FREQ_SHIFT;
 236         } else {
 237                 val &= ~OMAP_CTRL_USB3_PHY_PWRCTL_CLK_CMD_MASK;
 238                 val |= OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF <<
 239                         OMAP_CTRL_USB3_PHY_PWRCTL_CLK_CMD_SHIFT;
 240         }
 241         writel(val, phy->usb3_phy_power);
 242 }
 243 #endif
 244
 245 /**
 246  * ti_usb_phy_uboot_init - usb phy uboot initialization code
 247  * @dev: struct ti_usb_phy_device containing initialization data
 248  *
 249  * Entry point for ti usb phy driver. This driver handles initialization
 250  * of both usb2 phy and usb3 phy. Pointer to ti_usb_phy_device should be
 251  * passed containing base address and other initialization data.
 252  * Returns '0' on success and a negative value on failure.
 253  *
 254  * Generally called from board_usb_init() implemented in board file.
 255  */
 256 int ti_usb_phy_uboot_init(struct ti_usb_phy_device *dev)
 257 {
 258         struct ti_usb_phy *phy;
 259
 260         phy = devm_kzalloc(NULL, sizeof(*phy), GFP_KERNEL);
 261         if (!phy) {
 262                 dev_err(NULL, "unable to alloc mem for TI USB3 PHY\n");
 263                 return -ENOMEM;
 264         }
 265
 266         phy->dpll_map = dpll_map_usb;
 267         phy->index = dev->index;
 268         phy->pll_ctrl_base = dev->pll_ctrl_base;
 269         phy->usb2_phy_power = dev->usb2_phy_power;
 270         phy->usb3_phy_power = dev->usb3_phy_power;
 271
 272 #ifndef CONFIG_AM43XX
 273         ti_usb3_dpll_program(phy);
 274         ti_usb3_phy_power(phy, 1);
 275 #endif
 276         ti_usb2_phy_power(phy, 1);
 277         mdelay(150);
 278         list_add_tail(&phy->list, &ti_usb_phy_list);
 279
 280         return 0;
 281 }
 282
 283 /**
 284  * ti_usb_phy_uboot_exit - usb phy uboot cleanup code
 285  * @index: index of this controller
 286  *
 287  * Performs cleanup of memory allocated in ti_usb_phy_uboot_init.
 288  * index of _this_ controller should be passed and should match with
 289  * the index passed in ti_usb_phy_device during init.
 290  *
 291  * Generally called from board file.
 292  */
 293 void ti_usb_phy_uboot_exit(int index)
 294 {
 295         struct ti_usb_phy *phy = NULL;
 296
 297         list_for_each_entry(phy, &ti_usb_phy_list, list) {
 298                 if (phy->index != index)
 299                         continue;
 300
 301                 ti_usb2_phy_power(phy, 0);
 302 #ifndef CONFIG_AM43XX
 303                 ti_usb3_phy_power(phy, 0);
 304 #endif
 305                 list_del(&phy->list);
 306                 kfree(phy);
 307                 break;
 308         }
 309 }