]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - drivers/usb/gadget/mv_udc.h
imx6 SION bit has to be on for the pins that are used as ENET_REF_CLK
[karo-tx-uboot.git] / drivers / usb / gadget / mv_udc.h
1 /*
2  * Copyright 2011, Marvell Semiconductor Inc.
3  *
4  * Licensed under the GPL-2 or later.
5  */
6 #ifndef __GADGET__MV_UDC_H__
7 #define __GADGET__MV_UDC_H__
8
9 #define NUM_ENDPOINTS           6
10
11 struct mv_udc {
12 #define MICRO_8FRAME    0x8
13 #define USBCMD_ITC(x)   ((((x) > 0xff) ? 0xff : x) << 16)
14 #define USBCMD_FS2      (1 << 15)
15 #define USBCMD_RST      (1 << 1)
16 #define USBCMD_RUN      (1)
17         u32 usbcmd;             /* 0x140 */
18 #define STS_SLI         (1 << 8)
19 #define STS_URI         (1 << 6)
20 #define STS_PCI         (1 << 2)
21 #define STS_UEI         (1 << 1)
22 #define STS_UI          (1 << 0)
23         u32 usbsts;             /* 0x144 */
24         u32 pad1[3];
25         u32 devaddr;            /* 0x154 */
26         u32 epinitaddr;         /* 0x158 */
27         u32 pad2[10];
28 #define PTS_ENABLE      2
29 #define PTS(x)          (((x) & 0x3) << 30)
30 #define PFSC            (1 << 24)
31         u32 portsc;             /* 0x184 */
32         u32 pad3[8];
33 #define USBMODE_DEVICE  2
34         u32 usbmode;            /* 0x1a8 */
35         u32 epstat;             /* 0x1ac */
36 #define EPT_TX(x)       (1 << (((x) & 0xffff) + 16))
37 #define EPT_RX(x)       (1 << ((x) & 0xffff))
38         u32 epprime;            /* 0x1b0 */
39         u32 epflush;            /* 0x1b4 */
40         u32 pad4;
41         u32 epcomp;             /* 0x1bc */
42 #define CTRL_TXE        (1 << 23)
43 #define CTRL_TXR        (1 << 22)
44 #define CTRL_RXE        (1 << 7)
45 #define CTRL_RXR        (1 << 6)
46 #define CTRL_TXT_BULK   (2 << 18)
47 #define CTRL_RXT_BULK   (2 << 2)
48         u32 epctrl[16];         /* 0x1c0 */
49 };
50
51 struct mv_ep {
52         struct usb_ep ep;
53         struct list_head queue;
54         const struct usb_endpoint_descriptor *desc;
55
56         struct usb_request req;
57         uint8_t *b_buf;
58         uint32_t b_len;
59         uint8_t b_fast[64] __aligned(ARCH_DMA_MINALIGN);
60 };
61
62 struct mv_drv {
63         struct usb_gadget               gadget;
64         struct usb_gadget_driver        *driver;
65         struct ehci_ctrl                *ctrl;
66         struct ept_queue_head           *epts;
67         struct ept_queue_item           *items[2 * NUM_ENDPOINTS];
68         uint8_t                         *items_mem;
69         struct mv_ep                    ep[NUM_ENDPOINTS];
70 };
71
72 struct ept_queue_head {
73         unsigned config;
74         unsigned current;       /* read-only */
75
76         unsigned next;
77         unsigned info;
78         unsigned page0;
79         unsigned page1;
80         unsigned page2;
81         unsigned page3;
82         unsigned page4;
83         unsigned reserved_0;
84
85         unsigned char setup_data[8];
86
87         unsigned reserved_1;
88         unsigned reserved_2;
89         unsigned reserved_3;
90         unsigned reserved_4;
91 };
92
93 #define CONFIG_MAX_PKT(n)       ((n) << 16)
94 #define CONFIG_ZLT              (1 << 29)       /* stop on zero-len xfer */
95 #define CONFIG_IOS              (1 << 15)       /* IRQ on setup */
96
97 struct ept_queue_item {
98         unsigned next;
99         unsigned info;
100         unsigned page0;
101         unsigned page1;
102         unsigned page2;
103         unsigned page3;
104         unsigned page4;
105         unsigned reserved;
106 };
107
108 #define TERMINATE 1
109 #define INFO_BYTES(n)           ((n) << 16)
110 #define INFO_IOC                (1 << 15)
111 #define INFO_ACTIVE             (1 << 7)
112 #define INFO_HALTED             (1 << 6)
113 #define INFO_BUFFER_ERROR       (1 << 5)
114 #define INFO_TX_ERROR           (1 << 3)
115 #endif