drivers/video/exynos_dp.c

   1 /*
   2  * Copyright (C) 2012 Samsung Electronics
   3  *
   4  * Author: Donghwa Lee <dh09.lee@samsung.com>
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License as
   8  * published by the Free Software Foundation; either version 2 of
   9  * the License, or (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program; if not, write to the Free Software
  18  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  19  * MA 02111-1307 USA
  20  */
  21
  22 #include <config.h>
  23 #include <common.h>
  24 #include <malloc.h>
  25 #include <linux/err.h>
  26 #include <asm/arch/clk.h>
  27 #include <asm/arch/cpu.h>
  28 #include <asm/arch/dp_info.h>
  29 #include <asm/arch/dp.h>
  30 #include <fdtdec.h>
  31 #include <libfdt.h>
  32
  33 #include "exynos_dp_lowlevel.h"
  34
  35 DECLARE_GLOBAL_DATA_PTR;
  36
  37 static struct exynos_dp_platform_data *dp_pd;
  38
  39 void __exynos_set_dp_phy(unsigned int onoff)
  40 {
  41 }
  42 void exynos_set_dp_phy(unsigned int onoff)
  43         __attribute__((weak, alias("__exynos_set_dp_phy")));
  44
  45 static void exynos_dp_disp_info(struct edp_disp_info *disp_info)
  46 {
  47         disp_info->h_total = disp_info->h_res + disp_info->h_sync_width +
  48                 disp_info->h_back_porch + disp_info->h_front_porch;
  49         disp_info->v_total = disp_info->v_res + disp_info->v_sync_width +
  50                 disp_info->v_back_porch + disp_info->v_front_porch;
  51
  52         return;
  53 }
  54
  55 static int exynos_dp_init_dp(void)
  56 {
  57         int ret;
  58         exynos_dp_reset();
  59
  60         /* SW defined function Normal operation */
  61         exynos_dp_enable_sw_func(DP_ENABLE);
  62
  63         ret = exynos_dp_init_analog_func();
  64         if (ret != EXYNOS_DP_SUCCESS)
  65                 return ret;
  66
  67         exynos_dp_init_hpd();
  68         exynos_dp_init_aux();
  69
  70         return ret;
  71 }
  72
  73 static unsigned char exynos_dp_calc_edid_check_sum(unsigned char *edid_data)
  74 {
  75         int i;
  76         unsigned char sum = 0;
  77
  78         for (i = 0; i < EDID_BLOCK_LENGTH; i++)
  79                 sum = sum + edid_data[i];
  80
  81         return sum;
  82 }
  83
  84 static unsigned int exynos_dp_read_edid(void)
  85 {
  86         unsigned char edid[EDID_BLOCK_LENGTH * 2];
  87         unsigned int extend_block = 0;
  88         unsigned char sum;
  89         unsigned char test_vector;
  90         int retval;
  91
  92         /*
  93          * EDID device address is 0x50.
  94          * However, if necessary, you must have set upper address
  95          * into E-EDID in I2C device, 0x30.
  96          */
  97
  98         /* Read Extension Flag, Number of 128-byte EDID extension blocks */
  99         exynos_dp_read_byte_from_i2c(I2C_EDID_DEVICE_ADDR, EDID_EXTENSION_FLAG,
 100                         &extend_block);
 101
 102         if (extend_block > 0) {
 103                 printf("DP EDID data includes a single extension!\n");
 104
 105                 /* Read EDID data */
 106                 retval = exynos_dp_read_bytes_from_i2c(I2C_EDID_DEVICE_ADDR,
 107                                                 EDID_HEADER_PATTERN,
 108                                                 EDID_BLOCK_LENGTH,
 109                                                 &edid[EDID_HEADER_PATTERN]);
 110                 if (retval != 0) {
 111                         printf("DP EDID Read failed!\n");
 112                         return -1;
 113                 }
 114                 sum = exynos_dp_calc_edid_check_sum(edid);
 115                 if (sum != 0) {
 116                         printf("DP EDID bad checksum!\n");
 117                         return -1;
 118                 }
 119
 120                 /* Read additional EDID data */
 121                 retval = exynos_dp_read_bytes_from_i2c(I2C_EDID_DEVICE_ADDR,
 122                                 EDID_BLOCK_LENGTH,
 123                                 EDID_BLOCK_LENGTH,
 124                                 &edid[EDID_BLOCK_LENGTH]);
 125                 if (retval != 0) {
 126                         printf("DP EDID Read failed!\n");
 127                         return -1;
 128                 }
 129                 sum = exynos_dp_calc_edid_check_sum(&edid[EDID_BLOCK_LENGTH]);
 130                 if (sum != 0) {
 131                         printf("DP EDID bad checksum!\n");
 132                         return -1;
 133                 }
 134
 135                 exynos_dp_read_byte_from_dpcd(DPCD_TEST_REQUEST,
 136                                         &test_vector);
 137                 if (test_vector & DPCD_TEST_EDID_READ) {
 138                         exynos_dp_write_byte_to_dpcd(DPCD_TEST_EDID_CHECKSUM,
 139                                 edid[EDID_BLOCK_LENGTH + EDID_CHECKSUM]);
 140                         exynos_dp_write_byte_to_dpcd(DPCD_TEST_RESPONSE,
 141                                 DPCD_TEST_EDID_CHECKSUM_WRITE);
 142                 }
 143         } else {
 144                 debug("DP EDID data does not include any extensions.\n");
 145
 146                 /* Read EDID data */
 147                 retval = exynos_dp_read_bytes_from_i2c(I2C_EDID_DEVICE_ADDR,
 148                                 EDID_HEADER_PATTERN,
 149                                 EDID_BLOCK_LENGTH,
 150                                 &edid[EDID_HEADER_PATTERN]);
 151
 152                 if (retval != 0) {
 153                         printf("DP EDID Read failed!\n");
 154                         return -1;
 155                 }
 156                 sum = exynos_dp_calc_edid_check_sum(edid);
 157                 if (sum != 0) {
 158                         printf("DP EDID bad checksum!\n");
 159                         return -1;
 160                 }
 161
 162                 exynos_dp_read_byte_from_dpcd(DPCD_TEST_REQUEST,
 163                         &test_vector);
 164                 if (test_vector & DPCD_TEST_EDID_READ) {
 165                         exynos_dp_write_byte_to_dpcd(DPCD_TEST_EDID_CHECKSUM,
 166                                 edid[EDID_CHECKSUM]);
 167                         exynos_dp_write_byte_to_dpcd(DPCD_TEST_RESPONSE,
 168                                 DPCD_TEST_EDID_CHECKSUM_WRITE);
 169                 }
 170         }
 171
 172         debug("DP EDID Read success!\n");
 173
 174         return 0;
 175 }
 176
 177 static unsigned int exynos_dp_handle_edid(struct edp_device_info *edp_info)
 178 {
 179         unsigned char buf[12];
 180         unsigned int ret;
 181         unsigned char temp;
 182         unsigned char retry_cnt;
 183         unsigned char dpcd_rev[16];
 184         unsigned char lane_bw[16];
 185         unsigned char lane_cnt[16];
 186
 187         memset(dpcd_rev, 0, 16);
 188         memset(lane_bw, 0, 16);
 189         memset(lane_cnt, 0, 16);
 190         memset(buf, 0, 12);
 191
 192         retry_cnt = 5;
 193         while (retry_cnt) {
 194                 /* Read DPCD 0x0000-0x000b */
 195                 ret = exynos_dp_read_bytes_from_dpcd(DPCD_DPCD_REV, 12,
 196                                 buf);
 197                 if (ret != EXYNOS_DP_SUCCESS) {
 198                         if (retry_cnt == 0) {
 199                                 printf("DP read_byte_from_dpcd() failed\n");
 200                                 return ret;
 201                         }
 202                         retry_cnt--;
 203                 } else
 204                         break;
 205         }
 206
 207         /* */
 208         temp = buf[DPCD_DPCD_REV];
 209         if (temp == DP_DPCD_REV_10 || temp == DP_DPCD_REV_11)
 210                 edp_info->dpcd_rev = temp;
 211         else {
 212                 printf("DP Wrong DPCD Rev : %x\n", temp);
 213                 return -ENODEV;
 214         }
 215
 216         temp = buf[DPCD_MAX_LINK_RATE];
 217         if (temp == DP_LANE_BW_1_62 || temp == DP_LANE_BW_2_70)
 218                 edp_info->lane_bw = temp;
 219         else {
 220                 printf("DP Wrong MAX LINK RATE : %x\n", temp);
 221                 return -EINVAL;
 222         }
 223
 224         /*Refer VESA Display Port Stnadard Ver1.1a Page 120 */
 225         if (edp_info->dpcd_rev == DP_DPCD_REV_11) {
 226                 temp = buf[DPCD_MAX_LANE_COUNT] & 0x1f;
 227                 if (buf[DPCD_MAX_LANE_COUNT] & 0x80)
 228                         edp_info->dpcd_efc = 1;
 229                 else
 230                         edp_info->dpcd_efc = 0;
 231         } else {
 232                 temp = buf[DPCD_MAX_LANE_COUNT];
 233                 edp_info->dpcd_efc = 0;
 234         }
 235
 236         if (temp == DP_LANE_CNT_1 || temp == DP_LANE_CNT_2 ||
 237                         temp == DP_LANE_CNT_4) {
 238                 edp_info->lane_cnt = temp;
 239         } else {
 240                 printf("DP Wrong MAX LANE COUNT : %x\n", temp);
 241                 return -EINVAL;
 242         }
 243
 244         ret = exynos_dp_read_edid();
 245         if (ret != EXYNOS_DP_SUCCESS) {
 246                 printf("DP exynos_dp_read_edid() failed\n");
 247                 return -EINVAL;
 248         }
 249
 250         return ret;
 251 }
 252
 253 static void exynos_dp_init_training(void)
 254 {
 255         /*
 256          * MACRO_RST must be applied after the PLL_LOCK to avoid
 257          * the DP inter pair skew issue for at least 10 us
 258          */
 259         exynos_dp_reset_macro();
 260
 261         /* All DP analog module power up */
 262         exynos_dp_set_analog_power_down(POWER_ALL, 0);
 263 }
 264
 265 static unsigned int exynos_dp_link_start(struct edp_device_info *edp_info)
 266 {
 267         unsigned char buf[5];
 268         unsigned int ret = 0;
 269
 270         debug("DP: %s was called\n", __func__);
 271
 272         edp_info->lt_info.lt_status = DP_LT_CR;
 273         edp_info->lt_info.ep_loop = 0;
 274         edp_info->lt_info.cr_loop[0] = 0;
 275         edp_info->lt_info.cr_loop[1] = 0;
 276         edp_info->lt_info.cr_loop[2] = 0;
 277         edp_info->lt_info.cr_loop[3] = 0;
 278
 279                 /* Set sink to D0 (Sink Not Ready) mode. */
 280                 ret = exynos_dp_write_byte_to_dpcd(DPCD_SINK_POWER_STATE,
 281                                 DPCD_SET_POWER_STATE_D0);
 282         if (ret != EXYNOS_DP_SUCCESS) {
 283                 printf("DP write_dpcd_byte failed\n");
 284                 return ret;
 285         }
 286
 287         /* Set link rate and count as you want to establish*/
 288         exynos_dp_set_link_bandwidth(edp_info->lane_bw);
 289         exynos_dp_set_lane_count(edp_info->lane_cnt);
 290
 291         /* Setup RX configuration */
 292         buf[0] = edp_info->lane_bw;
 293         buf[1] = edp_info->lane_cnt;
 294
 295         ret = exynos_dp_write_bytes_to_dpcd(DPCD_LINK_BW_SET, 2,
 296                         buf);
 297         if (ret != EXYNOS_DP_SUCCESS) {
 298                 printf("DP write_dpcd_byte failed\n");
 299                 return ret;
 300         }
 301
 302         exynos_dp_set_lane_pre_emphasis(PRE_EMPHASIS_LEVEL_0,
 303                         edp_info->lane_cnt);
 304
 305         /* Set training pattern 1 */
 306         exynos_dp_set_training_pattern(TRAINING_PTN1);
 307
 308         /* Set RX training pattern */
 309         buf[0] = DPCD_SCRAMBLING_DISABLED | DPCD_TRAINING_PATTERN_1;
 310
 311         buf[1] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 |
 312                 DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0;
 313         buf[2] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 |
 314                 DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0;
 315         buf[3] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 |
 316                 DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0;
 317         buf[4] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 |
 318                 DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0;
 319
 320         ret = exynos_dp_write_bytes_to_dpcd(DPCD_TRAINING_PATTERN_SET,
 321                         5, buf);
 322         if (ret != EXYNOS_DP_SUCCESS) {
 323                 printf("DP write_dpcd_byte failed\n");
 324                 return ret;
 325         }
 326
 327         return ret;
 328 }
 329
 330 static unsigned int exynos_dp_training_pattern_dis(void)
 331 {
 332         unsigned int ret = EXYNOS_DP_SUCCESS;
 333
 334         exynos_dp_set_training_pattern(DP_NONE);
 335
 336         ret = exynos_dp_write_byte_to_dpcd(DPCD_TRAINING_PATTERN_SET,
 337                         DPCD_TRAINING_PATTERN_DISABLED);
 338         if (ret != EXYNOS_DP_SUCCESS) {
 339                 printf("DP requst_link_traninig_req failed\n");
 340                 return -EAGAIN;
 341         }
 342
 343         return ret;
 344 }
 345
 346 static unsigned int exynos_dp_enable_rx_to_enhanced_mode(unsigned char enable)
 347 {
 348         unsigned char data;
 349         unsigned int ret = EXYNOS_DP_SUCCESS;
 350
 351         ret = exynos_dp_read_byte_from_dpcd(DPCD_LANE_COUNT_SET,
 352                         &data);
 353         if (ret != EXYNOS_DP_SUCCESS) {
 354                 printf("DP read_from_dpcd failed\n");
 355                 return -EAGAIN;
 356         }
 357
 358         if (enable)
 359                 data = DPCD_ENHANCED_FRAME_EN | DPCD_LN_COUNT_SET(data);
 360         else
 361                 data = DPCD_LN_COUNT_SET(data);
 362
 363         ret = exynos_dp_write_byte_to_dpcd(DPCD_LANE_COUNT_SET,
 364                         data);
 365         if (ret != EXYNOS_DP_SUCCESS) {
 366                         printf("DP write_to_dpcd failed\n");
 367                         return -EAGAIN;
 368
 369         }
 370
 371         return ret;
 372 }
 373
 374 static unsigned int exynos_dp_set_enhanced_mode(unsigned char enhance_mode)
 375 {
 376         unsigned int ret = EXYNOS_DP_SUCCESS;
 377
 378         ret = exynos_dp_enable_rx_to_enhanced_mode(enhance_mode);
 379         if (ret != EXYNOS_DP_SUCCESS) {
 380                 printf("DP rx_enhance_mode failed\n");
 381                 return -EAGAIN;
 382         }
 383
 384         exynos_dp_enable_enhanced_mode(enhance_mode);
 385
 386         return ret;
 387 }
 388
 389 static int exynos_dp_read_dpcd_lane_stat(struct edp_device_info *edp_info,
 390                 unsigned char *status)
 391 {
 392         unsigned int ret, i;
 393         unsigned char buf[2];
 394         unsigned char lane_stat[DP_LANE_CNT_4] = {0,};
 395         unsigned char shift_val[DP_LANE_CNT_4] = {0,};
 396
 397         shift_val[0] = 0;
 398         shift_val[1] = 4;
 399         shift_val[2] = 0;
 400         shift_val[3] = 4;
 401
 402         ret = exynos_dp_read_bytes_from_dpcd(DPCD_LANE0_1_STATUS, 2, buf);
 403         if (ret != EXYNOS_DP_SUCCESS) {
 404                 printf("DP read lane status failed\n");
 405                 return ret;
 406         }
 407
 408         for (i = 0; i < edp_info->lane_cnt; i++) {
 409                 lane_stat[i] = (buf[(i / 2)] >> shift_val[i]) & 0x0f;
 410                 if (lane_stat[0] != lane_stat[i]) {
 411                         printf("Wrong lane status\n");
 412                         return -EINVAL;
 413                 }
 414         }
 415
 416         *status = lane_stat[0];
 417
 418         return ret;
 419 }
 420
 421 static unsigned int exynos_dp_read_dpcd_adj_req(unsigned char lane_num,
 422                 unsigned char *sw, unsigned char *em)
 423 {
 424         unsigned int ret = EXYNOS_DP_SUCCESS;
 425         unsigned char buf;
 426         unsigned int dpcd_addr;
 427         unsigned char shift_val[DP_LANE_CNT_4] = {0, 4, 0, 4};
 428
 429         /*lane_num value is used as arry index, so this range 0 ~ 3 */
 430         dpcd_addr = DPCD_ADJUST_REQUEST_LANE0_1 + (lane_num / 2);
 431
 432         ret = exynos_dp_read_byte_from_dpcd(dpcd_addr, &buf);
 433         if (ret != EXYNOS_DP_SUCCESS) {
 434                 printf("DP read adjust request failed\n");
 435                 return -EAGAIN;
 436         }
 437
 438         *sw = ((buf >> shift_val[lane_num]) & 0x03);
 439         *em = ((buf >> shift_val[lane_num]) & 0x0c) >> 2;
 440
 441         return ret;
 442 }
 443
 444 static int exynos_dp_equalizer_err_link(struct edp_device_info *edp_info)
 445 {
 446         int ret;
 447
 448         ret = exynos_dp_training_pattern_dis();
 449         if (ret != EXYNOS_DP_SUCCESS) {
 450                 printf("DP training_patter_disable() failed\n");
 451                 edp_info->lt_info.lt_status = DP_LT_FAIL;
 452         }
 453
 454         ret = exynos_dp_set_enhanced_mode(edp_info->dpcd_efc);
 455         if (ret != EXYNOS_DP_SUCCESS) {
 456                 printf("DP set_enhanced_mode() failed\n");
 457                 edp_info->lt_info.lt_status = DP_LT_FAIL;
 458         }
 459
 460         return ret;
 461 }
 462
 463 static int exynos_dp_reduce_link_rate(struct edp_device_info *edp_info)
 464 {
 465         int ret;
 466
 467         if (edp_info->lane_bw == DP_LANE_BW_2_70) {
 468                 edp_info->lane_bw = DP_LANE_BW_1_62;
 469                 printf("DP Change lane bw to 1.62Gbps\n");
 470                 edp_info->lt_info.lt_status = DP_LT_START;
 471                 ret = EXYNOS_DP_SUCCESS;
 472         } else {
 473                 ret = exynos_dp_training_pattern_dis();
 474                 if (ret != EXYNOS_DP_SUCCESS)
 475                         printf("DP training_patter_disable() failed\n");
 476
 477                 ret = exynos_dp_set_enhanced_mode(edp_info->dpcd_efc);
 478                 if (ret != EXYNOS_DP_SUCCESS)
 479                         printf("DP set_enhanced_mode() failed\n");
 480
 481                 edp_info->lt_info.lt_status = DP_LT_FAIL;
 482         }
 483
 484         return ret;
 485 }
 486
 487 static unsigned int exynos_dp_process_clock_recovery(struct edp_device_info
 488                                                         *edp_info)
 489 {
 490         unsigned int ret = EXYNOS_DP_SUCCESS;
 491         unsigned char lane_stat;
 492         unsigned char lt_ctl_val[DP_LANE_CNT_4] = {0, };
 493         unsigned int i;
 494         unsigned char adj_req_sw;
 495         unsigned char adj_req_em;
 496         unsigned char buf[5];
 497
 498         debug("DP: %s was called\n", __func__);
 499         mdelay(1);
 500
 501         ret = exynos_dp_read_dpcd_lane_stat(edp_info, &lane_stat);
 502         if (ret != EXYNOS_DP_SUCCESS) {
 503                         printf("DP read lane status failed\n");
 504                         edp_info->lt_info.lt_status = DP_LT_FAIL;
 505                         return ret;
 506         }
 507
 508         if (lane_stat & DP_LANE_STAT_CR_DONE) {
 509                 debug("DP clock Recovery training succeed\n");
 510                 exynos_dp_set_training_pattern(TRAINING_PTN2);
 511
 512                 for (i = 0; i < edp_info->lane_cnt; i++) {
 513                         ret = exynos_dp_read_dpcd_adj_req(i, &adj_req_sw,
 514                                         &adj_req_em);
 515                         if (ret != EXYNOS_DP_SUCCESS) {
 516                                 edp_info->lt_info.lt_status = DP_LT_FAIL;
 517                                 return ret;
 518                         }
 519
 520                         lt_ctl_val[i] = 0;
 521                         lt_ctl_val[i] = adj_req_em << 3 | adj_req_sw;
 522
 523                         if ((adj_req_sw == VOLTAGE_LEVEL_3)
 524                                 || (adj_req_em == PRE_EMPHASIS_LEVEL_3)) {
 525                                 lt_ctl_val[i] |= MAX_DRIVE_CURRENT_REACH_3 |
 526                                         MAX_PRE_EMPHASIS_REACH_3;
 527                         }
 528                         exynos_dp_set_lanex_pre_emphasis(lt_ctl_val[i], i);
 529                 }
 530
 531                 buf[0] =  DPCD_SCRAMBLING_DISABLED | DPCD_TRAINING_PATTERN_2;
 532                 buf[1] = lt_ctl_val[0];
 533                 buf[2] = lt_ctl_val[1];
 534                 buf[3] = lt_ctl_val[2];
 535                 buf[4] = lt_ctl_val[3];
 536
 537                 ret = exynos_dp_write_bytes_to_dpcd(
 538                                 DPCD_TRAINING_PATTERN_SET, 5, buf);
 539                 if (ret != EXYNOS_DP_SUCCESS) {
 540                         printf("DP write traning pattern1 failed\n");
 541                         edp_info->lt_info.lt_status = DP_LT_FAIL;
 542                         return ret;
 543                 } else
 544                         edp_info->lt_info.lt_status = DP_LT_ET;
 545         } else {
 546                 for (i = 0; i < edp_info->lane_cnt; i++) {
 547                         lt_ctl_val[i] = exynos_dp_get_lanex_pre_emphasis(i);
 548                                 ret = exynos_dp_read_dpcd_adj_req(i,
 549                                                 &adj_req_sw, &adj_req_em);
 550                         if (ret != EXYNOS_DP_SUCCESS) {
 551                                 printf("DP read adj req failed\n");
 552                                 edp_info->lt_info.lt_status = DP_LT_FAIL;
 553                                 return ret;
 554                         }
 555
 556                         if ((adj_req_sw == VOLTAGE_LEVEL_3) ||
 557                                         (adj_req_em == PRE_EMPHASIS_LEVEL_3))
 558                                 ret = exynos_dp_reduce_link_rate(edp_info);
 559
 560                         if ((DRIVE_CURRENT_SET_0_GET(lt_ctl_val[i]) ==
 561                                                 adj_req_sw) &&
 562                                 (PRE_EMPHASIS_SET_0_GET(lt_ctl_val[i]) ==
 563                                                 adj_req_em)) {
 564                                 edp_info->lt_info.cr_loop[i]++;
 565                                 if (edp_info->lt_info.cr_loop[i] == MAX_CR_LOOP)
 566                                         ret = exynos_dp_reduce_link_rate(
 567                                                         edp_info);
 568                         }
 569
 570                         lt_ctl_val[i] = 0;
 571                         lt_ctl_val[i] = adj_req_em << 3 | adj_req_sw;
 572
 573                         if ((adj_req_sw == VOLTAGE_LEVEL_3) ||
 574                                         (adj_req_em == PRE_EMPHASIS_LEVEL_3)) {
 575                                 lt_ctl_val[i] |= MAX_DRIVE_CURRENT_REACH_3 |
 576                                         MAX_PRE_EMPHASIS_REACH_3;
 577                         }
 578                         exynos_dp_set_lanex_pre_emphasis(lt_ctl_val[i], i);
 579                 }
 580
 581                 ret = exynos_dp_write_bytes_to_dpcd(
 582                                 DPCD_TRAINING_LANE0_SET, 4, lt_ctl_val);
 583                 if (ret != EXYNOS_DP_SUCCESS) {
 584                         printf("DP write traning pattern2 failed\n");
 585                         edp_info->lt_info.lt_status = DP_LT_FAIL;
 586                         return ret;
 587                 }
 588         }
 589
 590         return ret;
 591 }
 592
 593 static unsigned int exynos_dp_process_equalizer_training(struct edp_device_info
 594                 *edp_info)
 595 {
 596         unsigned int ret = EXYNOS_DP_SUCCESS;
 597         unsigned char lane_stat, adj_req_sw, adj_req_em, i;
 598         unsigned char lt_ctl_val[DP_LANE_CNT_4] = {0,};
 599         unsigned char interlane_aligned = 0;
 600         unsigned char f_bw;
 601         unsigned char f_lane_cnt;
 602         unsigned char sink_stat;
 603
 604         mdelay(1);
 605
 606         ret = exynos_dp_read_dpcd_lane_stat(edp_info, &lane_stat);
 607         if (ret != EXYNOS_DP_SUCCESS) {
 608                 printf("DP read lane status failed\n");
 609                 edp_info->lt_info.lt_status = DP_LT_FAIL;
 610                 return ret;
 611         }
 612
 613         debug("DP lane stat : %x\n", lane_stat);
 614
 615         if (lane_stat & DP_LANE_STAT_CR_DONE) {
 616                 ret = exynos_dp_read_byte_from_dpcd(DPCD_LN_ALIGN_UPDATED,
 617                                 &sink_stat);
 618                 if (ret != EXYNOS_DP_SUCCESS) {
 619                         edp_info->lt_info.lt_status = DP_LT_FAIL;
 620
 621                         return ret;
 622                 }
 623
 624                 interlane_aligned = (sink_stat & DPCD_INTERLANE_ALIGN_DONE);
 625
 626                 for (i = 0; i < edp_info->lane_cnt; i++) {
 627                         ret = exynos_dp_read_dpcd_adj_req(i,
 628                                         &adj_req_sw, &adj_req_em);
 629                         if (ret != EXYNOS_DP_SUCCESS) {
 630                                 printf("DP read adj req 1 failed\n");
 631                                 edp_info->lt_info.lt_status = DP_LT_FAIL;
 632
 633                                 return ret;
 634                         }
 635
 636                         lt_ctl_val[i] = 0;
 637                         lt_ctl_val[i] = adj_req_em << 3 | adj_req_sw;
 638
 639                         if ((adj_req_sw == VOLTAGE_LEVEL_3) ||
 640                                 (adj_req_em == PRE_EMPHASIS_LEVEL_3)) {
 641                                 lt_ctl_val[i] |= MAX_DRIVE_CURRENT_REACH_3;
 642                                 lt_ctl_val[i] |= MAX_PRE_EMPHASIS_REACH_3;
 643                         }
 644                 }
 645
 646                 if (((lane_stat&DP_LANE_STAT_CE_DONE) &&
 647                         (lane_stat&DP_LANE_STAT_SYM_LOCK))
 648                         && (interlane_aligned == DPCD_INTERLANE_ALIGN_DONE)) {
 649                         debug("DP Equalizer training succeed\n");
 650
 651                         f_bw = exynos_dp_get_link_bandwidth();
 652                         f_lane_cnt = exynos_dp_get_lane_count();
 653
 654                         debug("DP final BandWidth : %x\n", f_bw);
 655                         debug("DP final Lane Count : %x\n", f_lane_cnt);
 656
 657                         edp_info->lt_info.lt_status = DP_LT_FINISHED;
 658
 659                         exynos_dp_equalizer_err_link(edp_info);
 660
 661                 } else {
 662                         edp_info->lt_info.ep_loop++;
 663
 664                         if (edp_info->lt_info.ep_loop > MAX_EQ_LOOP) {
 665                                 if (edp_info->lane_bw == DP_LANE_BW_2_70) {
 666                                         ret = exynos_dp_reduce_link_rate(
 667                                                         edp_info);
 668                                 } else {
 669                                         edp_info->lt_info.lt_status =
 670                                                                 DP_LT_FAIL;
 671                                         exynos_dp_equalizer_err_link(edp_info);
 672                                 }
 673                         } else {
 674                                 for (i = 0; i < edp_info->lane_cnt; i++)
 675                                         exynos_dp_set_lanex_pre_emphasis(
 676                                                         lt_ctl_val[i], i);
 677
 678                                 ret = exynos_dp_write_bytes_to_dpcd(
 679                                         DPCD_TRAINING_LANE0_SET,
 680                                         4, lt_ctl_val);
 681                                 if (ret != EXYNOS_DP_SUCCESS) {
 682                                         printf("DP set lt pattern failed\n");
 683                                         edp_info->lt_info.lt_status =
 684                                                                 DP_LT_FAIL;
 685                                         exynos_dp_equalizer_err_link(edp_info);
 686                                 }
 687                         }
 688                 }
 689         } else if (edp_info->lane_bw == DP_LANE_BW_2_70) {
 690                 ret = exynos_dp_reduce_link_rate(edp_info);
 691         } else {
 692                 edp_info->lt_info.lt_status = DP_LT_FAIL;
 693                 exynos_dp_equalizer_err_link(edp_info);
 694         }
 695
 696         return ret;
 697 }
 698
 699 static unsigned int exynos_dp_sw_link_training(struct edp_device_info *edp_info)
 700 {
 701         unsigned int ret = 0;
 702         int training_finished;
 703
 704         /* Turn off unnecessary lane */
 705         if (edp_info->lane_cnt == 1)
 706                 exynos_dp_set_analog_power_down(CH1_BLOCK, 1);
 707
 708         training_finished = 0;
 709
 710         edp_info->lt_info.lt_status = DP_LT_START;
 711
 712         /* Process here */
 713         while (!training_finished) {
 714                 switch (edp_info->lt_info.lt_status) {
 715                 case DP_LT_START:
 716                         ret = exynos_dp_link_start(edp_info);
 717                         if (ret != EXYNOS_DP_SUCCESS) {
 718                                 printf("DP LT:link start failed\n");
 719                                 return ret;
 720                         }
 721                         break;
 722                 case DP_LT_CR:
 723                         ret = exynos_dp_process_clock_recovery(edp_info);
 724                         if (ret != EXYNOS_DP_SUCCESS) {
 725                                 printf("DP LT:clock recovery failed\n");
 726                                 return ret;
 727                         }
 728                         break;
 729                 case DP_LT_ET:
 730                         ret = exynos_dp_process_equalizer_training(edp_info);
 731                         if (ret != EXYNOS_DP_SUCCESS) {
 732                                 printf("DP LT:equalizer training failed\n");
 733                                 return ret;
 734                         }
 735                         break;
 736                 case DP_LT_FINISHED:
 737                         training_finished = 1;
 738                         break;
 739                 case DP_LT_FAIL:
 740                         return -1;
 741                 }
 742         }
 743
 744         return ret;
 745 }
 746
 747 static unsigned int exynos_dp_set_link_train(struct edp_device_info *edp_info)
 748 {
 749         unsigned int ret;
 750
 751         exynos_dp_init_training();
 752
 753         ret = exynos_dp_sw_link_training(edp_info);
 754         if (ret != EXYNOS_DP_SUCCESS)
 755                 printf("DP dp_sw_link_traning() failed\n");
 756
 757         return ret;
 758 }
 759
 760 static void exynos_dp_enable_scramble(unsigned int enable)
 761 {
 762         unsigned char data;
 763
 764         if (enable) {
 765                 exynos_dp_enable_scrambling(DP_ENABLE);
 766
 767                 exynos_dp_read_byte_from_dpcd(DPCD_TRAINING_PATTERN_SET,
 768                                 &data);
 769                 exynos_dp_write_byte_to_dpcd(DPCD_TRAINING_PATTERN_SET,
 770                         (u8)(data & ~DPCD_SCRAMBLING_DISABLED));
 771         } else {
 772                 exynos_dp_enable_scrambling(DP_DISABLE);
 773                 exynos_dp_read_byte_from_dpcd(DPCD_TRAINING_PATTERN_SET,
 774                                 &data);
 775                 exynos_dp_write_byte_to_dpcd(DPCD_TRAINING_PATTERN_SET,
 776                         (u8)(data | DPCD_SCRAMBLING_DISABLED));
 777         }
 778 }
 779
 780 static unsigned int exynos_dp_config_video(struct edp_device_info *edp_info)
 781 {
 782         unsigned int ret = 0;
 783         unsigned int retry_cnt;
 784
 785         mdelay(1);
 786
 787         if (edp_info->video_info.master_mode) {
 788                 printf("DP does not support master mode\n");
 789                 return -ENODEV;
 790         } else {
 791                 /* debug slave */
 792                 exynos_dp_config_video_slave_mode(&edp_info->video_info);
 793         }
 794
 795         exynos_dp_set_video_color_format(&edp_info->video_info);
 796
 797         if (edp_info->video_info.bist_mode) {
 798                 if (exynos_dp_config_video_bist(edp_info) != 0)
 799                         return -1;
 800         }
 801
 802         ret = exynos_dp_get_pll_lock_status();
 803         if (ret != PLL_LOCKED) {
 804                 printf("DP PLL is not locked yet\n");
 805                 return -EIO;
 806         }
 807
 808         if (edp_info->video_info.master_mode == 0) {
 809                 retry_cnt = 10;
 810                 while (retry_cnt) {
 811                         ret = exynos_dp_is_slave_video_stream_clock_on();
 812                         if (ret != EXYNOS_DP_SUCCESS) {
 813                                 if (retry_cnt == 0) {
 814                                         printf("DP stream_clock_on failed\n");
 815                                         return ret;
 816                                 }
 817                                 retry_cnt--;
 818                                 mdelay(1);
 819                         } else
 820                                 break;
 821                 }
 822         }
 823
 824         /* Set to use the register calculated M/N video */
 825         exynos_dp_set_video_cr_mn(CALCULATED_M, 0, 0);
 826
 827         /* For video bist, Video timing must be generated by register */
 828         exynos_dp_set_video_timing_mode(VIDEO_TIMING_FROM_CAPTURE);
 829
 830         /* Enable video bist */
 831         if (edp_info->video_info.bist_pattern != COLOR_RAMP &&
 832                 edp_info->video_info.bist_pattern != BALCK_WHITE_V_LINES &&
 833                 edp_info->video_info.bist_pattern != COLOR_SQUARE)
 834                 exynos_dp_enable_video_bist(edp_info->video_info.bist_mode);
 835         else
 836                 exynos_dp_enable_video_bist(DP_DISABLE);
 837
 838         /* Disable video mute */
 839         exynos_dp_enable_video_mute(DP_DISABLE);
 840
 841         /* Configure video Master or Slave mode */
 842         exynos_dp_enable_video_master(edp_info->video_info.master_mode);
 843
 844         /* Enable video */
 845         exynos_dp_start_video();
 846
 847         if (edp_info->video_info.master_mode == 0) {
 848                 retry_cnt = 100;
 849                 while (retry_cnt) {
 850                         ret = exynos_dp_is_video_stream_on();
 851                         if (ret != EXYNOS_DP_SUCCESS) {
 852                                 if (retry_cnt == 0) {
 853                                         printf("DP Timeout of video stream\n");
 854                                         return ret;
 855                                 }
 856                                 retry_cnt--;
 857                                 mdelay(5);
 858                         } else
 859                                 break;
 860                 }
 861         }
 862
 863         return ret;
 864 }
 865
 866 #ifdef CONFIG_OF_CONTROL
 867 int exynos_dp_parse_dt(const void *blob, struct edp_device_info *edp_info)
 868 {
 869         unsigned int node = fdtdec_next_compatible(blob, 0,
 870                                                 COMPAT_SAMSUNG_EXYNOS5_DP);
 871         if (node <= 0) {
 872                 debug("exynos_dp: Can't get device node for dp\n");
 873                 return -ENODEV;
 874         }
 875
 876         edp_info->disp_info.h_res = fdtdec_get_int(blob, node,
 877                                                         "samsung,h-res", 0);
 878         edp_info->disp_info.h_sync_width = fdtdec_get_int(blob, node,
 879                                                 "samsung,h-sync-width", 0);
 880         edp_info->disp_info.h_back_porch = fdtdec_get_int(blob, node,
 881                                                 "samsung,h-back-porch", 0);
 882         edp_info->disp_info.h_front_porch = fdtdec_get_int(blob, node,
 883                                                 "samsung,h-front-porch", 0);
 884         edp_info->disp_info.v_res = fdtdec_get_int(blob, node,
 885                                                 "samsung,v-res", 0);
 886         edp_info->disp_info.v_sync_width = fdtdec_get_int(blob, node,
 887                                                 "samsung,v-sync-width", 0);
 888         edp_info->disp_info.v_back_porch = fdtdec_get_int(blob, node,
 889                                                 "samsung,v-back-porch", 0);
 890         edp_info->disp_info.v_front_porch = fdtdec_get_int(blob, node,
 891                                                 "samsung,v-front-porch", 0);
 892         edp_info->disp_info.v_sync_rate = fdtdec_get_int(blob, node,
 893                                                 "samsung,v-sync-rate", 0);
 894
 895         edp_info->lt_info.lt_status = fdtdec_get_int(blob, node,
 896                                                 "samsung,lt-status", 0);
 897
 898         edp_info->video_info.master_mode = fdtdec_get_int(blob, node,
 899                                                 "samsung,master-mode", 0);
 900         edp_info->video_info.bist_mode = fdtdec_get_int(blob, node,
 901                                                 "samsung,bist-mode", 0);
 902         edp_info->video_info.bist_pattern = fdtdec_get_int(blob, node,
 903                                                 "samsung,bist-pattern", 0);
 904         edp_info->video_info.h_sync_polarity = fdtdec_get_int(blob, node,
 905                                                 "samsung,h-sync-polarity", 0);
 906         edp_info->video_info.v_sync_polarity = fdtdec_get_int(blob, node,
 907                                                 "samsung,v-sync-polarity", 0);
 908         edp_info->video_info.interlaced = fdtdec_get_int(blob, node,
 909                                                 "samsung,interlaced", 0);
 910         edp_info->video_info.color_space = fdtdec_get_int(blob, node,
 911                                                 "samsung,color-space", 0);
 912         edp_info->video_info.dynamic_range = fdtdec_get_int(blob, node,
 913                                                 "samsung,dynamic-range", 0);
 914         edp_info->video_info.ycbcr_coeff = fdtdec_get_int(blob, node,
 915                                                 "samsung,ycbcr-coeff", 0);
 916         edp_info->video_info.color_depth = fdtdec_get_int(blob, node,
 917                                                 "samsung,color-depth", 0);
 918         return 0;
 919 }
 920 #endif
 921
 922 unsigned int exynos_init_dp(void)
 923 {
 924         unsigned int ret;
 925         struct edp_device_info *edp_info;
 926
 927         edp_info = kzalloc(sizeof(struct edp_device_info), GFP_KERNEL);
 928         if (!edp_info) {
 929                 debug("failed to allocate edp device object.\n");
 930                 return -EFAULT;
 931         }
 932
 933 #ifdef CONFIG_OF_CONTROL
 934         if (exynos_dp_parse_dt(gd->fdt_blob, edp_info))
 935                 debug("unable to parse DP DT node\n");
 936 #else
 937         edp_info = dp_pd->edp_dev_info;
 938         if (edp_info == NULL) {
 939                 debug("failed to get edp_info data.\n");
 940                 return -EFAULT;
 941         }
 942 #endif
 943
 944         exynos_dp_set_base_addr();
 945
 946         exynos_dp_disp_info(&edp_info->disp_info);
 947
 948         exynos_set_dp_phy(1);
 949
 950         ret = exynos_dp_init_dp();
 951         if (ret != EXYNOS_DP_SUCCESS) {
 952                 printf("DP exynos_dp_init_dp() failed\n");
 953                 return ret;
 954         }
 955
 956         ret = exynos_dp_handle_edid(edp_info);
 957         if (ret != EXYNOS_DP_SUCCESS) {
 958                 printf("EDP handle_edid fail\n");
 959                 return ret;
 960         }
 961
 962         ret = exynos_dp_set_link_train(edp_info);
 963         if (ret != EXYNOS_DP_SUCCESS) {
 964                 printf("DP link training fail\n");
 965                 return ret;
 966         }
 967
 968         exynos_dp_enable_scramble(DP_ENABLE);
 969         exynos_dp_enable_rx_to_enhanced_mode(DP_ENABLE);
 970         exynos_dp_enable_enhanced_mode(DP_ENABLE);
 971
 972         exynos_dp_set_link_bandwidth(edp_info->lane_bw);
 973         exynos_dp_set_lane_count(edp_info->lane_cnt);
 974
 975         exynos_dp_init_video();
 976         ret = exynos_dp_config_video(edp_info);
 977         if (ret != EXYNOS_DP_SUCCESS) {
 978                 printf("Exynos DP init failed\n");
 979                 return ret;
 980         }
 981
 982         printf("Exynos DP init done\n");
 983
 984         return ret;
 985 }
 986
 987 void exynos_set_dp_platform_data(struct exynos_dp_platform_data *pd)
 988 {
 989         if (pd == NULL) {
 990                 debug("pd is NULL\n");
 991                 return;
 992         }
 993
 994         dp_pd = pd;
 995 }