]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - include/at91rm9200_i2c.h
at91sam9260ek: move board id setup to config header
[karo-tx-uboot.git] / include / at91rm9200_i2c.h
1 /* ---------------------------------------------------------------------------- */
2 /*          ATMEL Microcontroller Software Support  -  ROUSSET  -               */
3 /* ---------------------------------------------------------------------------- */
4 /*  The software is delivered "AS IS" without warranty or condition of any      */
5 /*  kind, either express, implied or statutory. This includes without           */
6 /*  limitation any warranty or condition with respect to merchantability or     */
7 /*  fitness for any particular purpose, or against the infringements of         */
8 /*  intellectual property rights of others.                                     */
9 /* ---------------------------------------------------------------------------- */
10 /* File Name           : at91rm9200_i2c.h                                       */
11 /* Object              : AT91RM9200 / TWI definitions                           */
12 /* Generated           : AT91 SW Application Group  12/03/2002 (10:48:02)       */
13 /*                                                                              */
14 /* ---------------------------------------------------------------------------- */
15
16 #ifndef AT91RM9200_TWI_H
17 #define AT91RM9200_TWI_H
18
19 /* ******************************************************************************/
20 /*              SOFTWARE API DEFINITION  FOR Two-wire Interface                 */
21 /* ******************************************************************************/
22 #ifndef __ASSEMBLY__
23
24 typedef struct _AT91S_TWI {
25         AT91_REG         TWI_CR;        /* Control Register                     */
26         AT91_REG         TWI_MMR;       /* Master Mode Register                 */
27         AT91_REG         TWI_SMR;       /* Slave Mode Register                  */
28         AT91_REG         TWI_IADR;      /* Internal Address Register            */
29         AT91_REG         TWI_CWGR;      /* Clock Waveform Generator Register    */
30         AT91_REG         Reserved0[3];
31         AT91_REG         TWI_SR;        /* Status Register                      */
32         AT91_REG         TWI_IER;       /* Interrupt Enable Register            */
33         AT91_REG         TWI_IDR;       /* Interrupt Disable Register           */
34         AT91_REG         TWI_IMR;       /* Interrupt Mask Register              */
35         AT91_REG         TWI_RHR;       /* Receive Holding Register             */
36         AT91_REG         TWI_THR;       /* Transmit Holding Register            */
37         AT91_REG         Reserved1[50];
38         AT91_REG         TWI_RPR;       /* Receive Pointer Register             */
39         AT91_REG         TWI_RCR;       /* Receive Counter Register             */
40         AT91_REG         TWI_TPR;       /* Transmit Pointer Register            */
41         AT91_REG         TWI_TCR;       /* Transmit Counter Register            */
42         AT91_REG         TWI_RNPR;      /* Receive Next Pointer Register        */
43         AT91_REG         TWI_RNCR;      /* Receive Next Counter Register        */
44         AT91_REG         TWI_TNPR;      /* Transmit Next Pointer Register       */
45         AT91_REG         TWI_TNCR;      /* Transmit Next Counter Register       */
46         AT91_REG         TWI_PTCR;      /* PDC Transfer Control Register        */
47         AT91_REG         TWI_PTSR;      /* PDC Transfer Status Register         */
48 } AT91S_TWI, *AT91PS_TWI;
49
50 #endif
51
52 /* -------- TWI_CR : (TWI Offset: 0x0) TWI Control Register --------            */
53 #define AT91C_TWI_START (0x1 <<  0)     /* (TWI) Send a START Condition         */
54 #define AT91C_TWI_STOP  (0x1 <<  1)     /* (TWI) Send a STOP Condition          */
55 #define AT91C_TWI_MSEN  (0x1 <<  2)     /* (TWI) TWI Master Transfer Enabled    */
56 #define AT91C_TWI_MSDIS (0x1 <<  3)     /* (TWI) TWI Master Transfer Disabled   */
57 #define AT91C_TWI_SVEN  (0x1 <<  4)     /* (TWI) TWI Slave Transfer Enabled     */
58 #define AT91C_TWI_SVDIS (0x1 <<  5)     /* (TWI) TWI Slave Transfer Disabled    */
59 #define AT91C_TWI_SWRST (0x1 <<  7)     /* (TWI) Software Reset         */
60 /* -------- TWI_MMR : (TWI Offset: 0x4) TWI Master Mode Register --------       */
61 #define AT91C_TWI_IADRSZ      (0x3 <<  8) /* (TWI) Internal Device Address Size */
62 #define   AT91C_TWI_IADRSZ_NO     (0x0 <<  8) /* (TWI) No internal device address       */
63 #define   AT91C_TWI_IADRSZ_1_BYTE (0x1 <<  8) /* (TWI) One-byte internal device address */
64 #define   AT91C_TWI_IADRSZ_2_BYTE (0x2 <<  8) /* (TWI) Two-byte internal device address */
65 #define   AT91C_TWI_IADRSZ_3_BYTE (0x3 <<  8) /* (TWI) Three-byte internal device address */
66 #define AT91C_TWI_MREAD (0x1 << 12)     /* (TWI) Master Read Direction          */
67 #define AT91C_TWI_DADR  (0x7F <<  6)    /* (TWI) Device Address                 */
68 /* -------- TWI_SMR : (TWI Offset: 0x8) TWI Slave Mode Register --------        */
69 #define AT91C_TWI_SADR  (0x7F << 16)    /* (TWI) Slave Device Address           */
70 /* -------- TWI_CWGR : (TWI Offset: 0x10) TWI Clock Waveform Generator Register --------        */
71 #define AT91C_TWI_CLDIV  (0xFF <<  0)   /* (TWI) Clock Low Divider              */
72 #define AT91C_TWI_CHDIV  (0xFF <<  8)   /* (TWI) Clock High Divider             */
73 #define AT91C_TWI_CKDIV  (0x7 << 16)    /* (TWI) Clock Divider                  */
74 /* -------- TWI_SR : (TWI Offset: 0x20) TWI Status Register --------            */
75 #define AT91C_TWI_TXCOMP (0x1 <<  0)    /* (TWI) Transmission Completed         */
76 #define AT91C_TWI_RXRDY  (0x1 <<  1)    /* (TWI) Receive holding register ReaDY */
77 #define AT91C_TWI_TXRDY  (0x1 <<  2)    /* (TWI) Transmit holding register ReaDY*/
78 #define AT91C_TWI_SVREAD (0x1 <<  3)    /* (TWI) Slave Read                     */
79 #define AT91C_TWI_SVACC  (0x1 <<  4)    /* (TWI) Slave Access                   */
80 #define AT91C_TWI_GCACC  (0x1 <<  5)    /* (TWI) General Call Access            */
81 #define AT91C_TWI_OVRE   (0x1 <<  6)    /* (TWI) Overrun Error                  */
82 #define AT91C_TWI_UNRE   (0x1 <<  7)    /* (TWI) Underrun Error                 */
83 #define AT91C_TWI_NACK   (0x1 <<  8)    /* (TWI) Not Acknowledged               */
84 #define AT91C_TWI_ARBLST (0x1 <<  9)    /* (TWI) Arbitration Lost               */
85 /* -------- TWI_IER : (TWI Offset: 0x24) TWI Interrupt Enable Register -------- */
86 /* -------- TWI_IDR : (TWI Offset: 0x28) TWI Interrupt Disable Register ------- */
87 /* -------- TWI_IMR : (TWI Offset: 0x2c) TWI Interrupt Mask Register --------   */
88
89 /*
90     i2c Support for Atmel's AT91RM9200 Two-Wire Interface
91
92     (c) Rick Bronson
93
94     This program is free software; you can redistribute it and/or modify
95     it under the terms of the GNU General Public License as published by
96     the Free Software Foundation; either version 2 of the License, or
97     (at your option) any later version.
98
99     This program is distributed in the hope that it will be useful,
100     but WITHOUT ANY WARRANTY; without even the implied warranty of
101     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
102     GNU General Public License for more details.
103
104     You should have received a copy of the GNU General Public License
105     along with this program; if not, write to the Free Software
106     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
107 */
108
109 #ifndef AT91_I2C_H
110 #define AT91_I2C_H
111
112 #define AT91C_TWI_CLOCK         100000
113 #define AT91C_TWI_SCLOCK        (10 * AT91C_MASTER_CLOCK / AT91C_TWI_CLOCK)
114 #define AT91C_TWI_CKDIV1        (2 << 16)       /* TWI clock divider.  NOTE: see Errata #22 */
115
116 #if (AT91C_TWI_SCLOCK % 10) >= 5
117 #define AT91C_TWI_CLDIV2 ((AT91C_TWI_SCLOCK / 10) - 5)
118 #else
119 #define AT91C_TWI_CLDIV2 ((AT91C_TWI_SCLOCK / 10) - 6)
120 #endif
121 #define AT91C_TWI_CLDIV3 ((AT91C_TWI_CLDIV2 + (4 - AT91C_TWI_CLDIV2 % 4)) >> 2)
122
123 #define AT91C_EEPROM_I2C_ADDRESS        (0x50 << 16)
124
125 #endif  /* __ASSEMBLY__ */
126 #endif  /* AT91RM9200_TWI_H */