include/configs/B4860QDS.h

   1 /*
   2  * Copyright 2011-2012 Freescale Semiconductor, Inc.
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22
  23 #ifndef __CONFIG_H
  24 #define __CONFIG_H
  25
  26 /*
  27  * B4860 QDS board configuration file
  28  */
  29 #define CONFIG_B4860QDS
  30 #define CONFIG_PHYS_64BIT
  31
  32 #ifdef CONFIG_RAMBOOT_PBL
  33 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  34 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  35 #endif
  36
  37 /* High Level Configuration Options */
  38 #define CONFIG_BOOKE
  39 #define CONFIG_E6500
  40 #define CONFIG_E500                     /* BOOKE e500 family */
  41 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  42 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  43 #define CONFIG_MPC85xx                  /* MPC85xx/PQ3 platform */
  44 #define CONFIG_FSL_CORENET              /* Freescale CoreNet platform */
  45 #define CONFIG_MP                       /* support multiple processors */
  46
  47 #ifndef CONFIG_SYS_TEXT_BASE
  48 #define CONFIG_SYS_TEXT_BASE    0xeff80000
  49 #endif
  50
  51 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  52 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  53 #endif
  54
  55 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  56 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  57 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  58 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  59 #define CONFIG_PCIE1                    /* PCIE controler 1 */
  60 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  61 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  62
  63 #ifndef CONFIG_PPC_B4420
  64 #define CONFIG_SYS_SRIO
  65 #define CONFIG_SRIO1                    /* SRIO port 1 */
  66 #define CONFIG_SRIO2                    /* SRIO port 2 */
  67 #endif
  68
  69 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  70
  71 /* I2C bus multiplexer */
  72 #define I2C_MUX_PCA_ADDR                0x77
  73
  74 /* VSC Crossbar switches */
  75 #define CONFIG_VSC_CROSSBAR
  76 #define I2C_CH_DEFAULT                  0x8
  77 #define I2C_CH_VSC3316                  0xc
  78 #define I2C_CH_VSC3308                  0xd
  79
  80 #define VSC3316_TX_ADDRESS              0x70
  81 #define VSC3316_RX_ADDRESS              0x71
  82 #define VSC3308_TX_ADDRESS              0x02
  83 #define VSC3308_RX_ADDRESS              0x03
  84
  85 #define CONFIG_ENV_OVERWRITE
  86
  87 #ifdef CONFIG_SYS_NO_FLASH
  88 #define CONFIG_ENV_IS_NOWHERE
  89 #else
  90 #define CONFIG_FLASH_CFI_DRIVER
  91 #define CONFIG_SYS_FLASH_CFI
  92 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  93 #endif
  94
  95 #ifndef CONFIG_SYS_NO_FLASH
  96 #if defined(CONFIG_SPIFLASH)
  97 #define CONFIG_SYS_EXTRA_ENV_RELOC
  98 #define CONFIG_ENV_IS_IN_SPI_FLASH
  99 #define CONFIG_ENV_SPI_BUS              0
 100 #define CONFIG_ENV_SPI_CS               0
 101 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 102 #define CONFIG_ENV_SPI_MODE             0
 103 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 104 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 105 #define CONFIG_ENV_SECT_SIZE            0x10000
 106 #elif defined(CONFIG_SDCARD)
 107 #define CONFIG_SYS_EXTRA_ENV_RELOC
 108 #define CONFIG_ENV_IS_IN_MMC
 109 #define CONFIG_SYS_MMC_ENV_DEV          0
 110 #define CONFIG_ENV_SIZE                 0x2000
 111 #define CONFIG_ENV_OFFSET               (512 * 1097)
 112 #elif defined(CONFIG_NAND)
 113 #define CONFIG_SYS_EXTRA_ENV_RELOC
 114 #define CONFIG_ENV_IS_IN_NAND
 115 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
 116 #define CONFIG_ENV_OFFSET               (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
 117 #else
 118 #define CONFIG_ENV_IS_IN_FLASH
 119 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 120 #define CONFIG_ENV_SIZE         0x2000
 121 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 122 #endif
 123 #else /* CONFIG_SYS_NO_FLASH */
 124 #define CONFIG_ENV_SIZE                0x2000
 125 #define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
 126 #endif
 127
 128 #ifndef __ASSEMBLY__
 129 unsigned long get_board_sys_clk(void);
 130 unsigned long get_board_ddr_clk(void);
 131 #endif
 132 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
 133 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 134
 135 /*
 136  * These can be toggled for performance analysis, otherwise use default.
 137  */
 138 #define CONFIG_SYS_CACHE_STASHING
 139 #define CONFIG_BTB                      /* toggle branch predition */
 140 #define CONFIG_DDR_ECC
 141 #ifdef CONFIG_DDR_ECC
 142 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 143 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 144 #endif
 145
 146 #define CONFIG_ENABLE_36BIT_PHYS
 147
 148 #ifdef CONFIG_PHYS_64BIT
 149 #define CONFIG_ADDR_MAP
 150 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 151 #endif
 152
 153 #if 0
 154 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
 155 #endif
 156 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 157 #define CONFIG_SYS_MEMTEST_END          0x00400000
 158 #define CONFIG_SYS_ALT_MEMTEST
 159 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 160
 161 /*
 162  *  Config the L3 Cache as L3 SRAM
 163  */
 164 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
 165
 166 #ifdef CONFIG_PHYS_64BIT
 167 #define CONFIG_SYS_DCSRBAR              0xf0000000
 168 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 169 #endif
 170
 171 /* EEPROM */
 172 #define CONFIG_SYS_I2C_EEPROM_NXID
 173 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 174 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 175 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 176 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 177 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 178
 179 /*
 180  * DDR Setup
 181  */
 182 #define CONFIG_VERY_BIG_RAM
 183 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 184 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 185
 186 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 187 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 188 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 189
 190 #define CONFIG_DDR_SPD
 191 #define CONFIG_SYS_DDR_RAW_TIMING
 192 #define CONFIG_FSL_DDR3
 193 #define CONFIG_FSL_DDR_INTERACTIVE
 194
 195 #define CONFIG_SYS_SPD_BUS_NUM  0
 196 #define SPD_EEPROM_ADDRESS1     0x51
 197 #define SPD_EEPROM_ADDRESS2     0x53
 198
 199 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1
 200 #define CONFIG_SYS_SDRAM_SIZE   2048    /* for fixed parameter use */
 201
 202 /*
 203  * IFC Definitions
 204  */
 205 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 206 #ifdef CONFIG_PHYS_64BIT
 207 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 208 #else
 209 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 210 #endif
 211
 212 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 213 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 214                                 + 0x8000000) | \
 215                                 CSPR_PORT_SIZE_16 | \
 216                                 CSPR_MSEL_NOR | \
 217                                 CSPR_V)
 218 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 219 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 220                                 CSPR_PORT_SIZE_16 | \
 221                                 CSPR_MSEL_NOR | \
 222                                 CSPR_V)
 223 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128 * 1024 * 1024)
 224 /* NOR Flash Timing Params */
 225 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(4)
 226 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x01) | \
 227                                 FTIM0_NOR_TEADC(0x01) | \
 228                                 FTIM0_NOR_TEAHC(0x20))
 229 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 230                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 231                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 232 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x01) | \
 233                                 FTIM2_NOR_TCH(0x0E) | \
 234                                 FTIM2_NOR_TWPH(0x0E) | \
 235                                 FTIM2_NOR_TWP(0x1c))
 236 #define CONFIG_SYS_NOR_FTIM3    0x0
 237
 238 #define CONFIG_SYS_FLASH_QUIET_TEST
 239 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 240
 241 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 242 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 243 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 244 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 245
 246 #define CONFIG_SYS_FLASH_EMPTY_INFO
 247 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 248                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 249
 250 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 251 #define CONFIG_FSL_QIXIS_V2
 252 #define QIXIS_BASE              0xffdf0000
 253 #ifdef CONFIG_PHYS_64BIT
 254 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 255 #else
 256 #define QIXIS_BASE_PHYS         QIXIS_BASE
 257 #endif
 258 #define QIXIS_LBMAP_SWITCH              0x01
 259 #define QIXIS_LBMAP_MASK                0x0f
 260 #define QIXIS_LBMAP_SHIFT               0
 261 #define QIXIS_LBMAP_DFLTBANK            0x00
 262 #define QIXIS_LBMAP_ALTBANK             0x02
 263 #define QIXIS_RST_CTL_RESET             0x31
 264 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 265 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 266 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 267
 268 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 269 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 270                                 | CSPR_PORT_SIZE_8 \
 271                                 | CSPR_MSEL_GPCM \
 272                                 | CSPR_V)
 273 #define CONFIG_SYS_AMASK3       IFC_AMASK(4 * 1024)
 274 #define CONFIG_SYS_CSOR3        0x0
 275 /* QIXIS Timing parameters for IFC CS3 */
 276 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 277                                         FTIM0_GPCM_TEADC(0x0e) | \
 278                                         FTIM0_GPCM_TEAHC(0x0e))
 279 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 280                                         FTIM1_GPCM_TRAD(0x1f))
 281 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 282                                         FTIM2_GPCM_TCH(0x0) | \
 283                                         FTIM2_GPCM_TWP(0x1f))
 284 #define CONFIG_SYS_CS3_FTIM3            0x0
 285
 286 /* NAND Flash on IFC */
 287 #define CONFIG_NAND_FSL_IFC
 288 #define CONFIG_SYS_NAND_BASE            0xff800000
 289 #ifdef CONFIG_PHYS_64BIT
 290 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 291 #else
 292 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 293 #endif
 294
 295 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 296 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 297                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 298                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 299                                 | CSPR_V)
 300 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64 * 1024)
 301
 302 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 303                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 304                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 305                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 306                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 307                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 308                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 309
 310 #define CONFIG_SYS_NAND_ONFI_DETECTION
 311
 312 /* ONFI NAND Flash mode0 Timing Params */
 313 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 314                                         FTIM0_NAND_TWP(0x18)   | \
 315                                         FTIM0_NAND_TWCHT(0x07) | \
 316                                         FTIM0_NAND_TWH(0x0a))
 317 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 318                                         FTIM1_NAND_TWBE(0x39)  | \
 319                                         FTIM1_NAND_TRR(0x0e)   | \
 320                                         FTIM1_NAND_TRP(0x18))
 321 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 322                                         FTIM2_NAND_TREH(0x0a) | \
 323                                         FTIM2_NAND_TWHRE(0x1e))
 324 #define CONFIG_SYS_NAND_FTIM3           0x0
 325
 326 #define CONFIG_SYS_NAND_DDR_LAW         11
 327
 328 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 329 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 330 #define CONFIG_MTD_NAND_VERIFY_WRITE
 331 #define CONFIG_CMD_NAND
 332
 333 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 334
 335 #if defined(CONFIG_NAND)
 336 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 337 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 338 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 339 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 340 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 341 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 342 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 343 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 344 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 345 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
 346 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 347 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 348 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 349 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 350 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 351 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 352 #else
 353 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 354 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 355 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 356 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 357 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 358 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 359 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 360 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 361 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 362 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 363 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 364 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 365 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 366 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 367 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 368 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 369 #endif
 370 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 371 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 372 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 373 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 374 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 375 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 376 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 377 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 378
 379 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 380
 381 #if defined(CONFIG_RAMBOOT_PBL)
 382 #define CONFIG_SYS_RAMBOOT
 383 #endif
 384
 385 #define CONFIG_BOARD_EARLY_INIT_R
 386 #define CONFIG_MISC_INIT_R
 387
 388 #define CONFIG_HWCONFIG
 389
 390 /* define to use L1 as initial stack */
 391 #define CONFIG_L1_INIT_RAM
 392 #define CONFIG_SYS_INIT_RAM_LOCK
 393 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 394 #ifdef CONFIG_PHYS_64BIT
 395 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 396 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe0ec000
 397 /* The assembler doesn't like typecast */
 398 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 399         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 400           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 401 #else
 402 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe0ec000 /* Initial L1 address */
 403 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 404 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 405 #endif
 406 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 407
 408 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 409                                         GENERATED_GBL_DATA_SIZE)
 410 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 411
 412 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 413 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 414
 415 /* Serial Port - controlled on board with jumper J8
 416  * open - index 2
 417  * shorted - index 1
 418  */
 419 #define CONFIG_CONS_INDEX       1
 420 #define CONFIG_SYS_NS16550
 421 #define CONFIG_SYS_NS16550_SERIAL
 422 #define CONFIG_SYS_NS16550_REG_SIZE     1
 423 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 424
 425 #define CONFIG_SYS_BAUDRATE_TABLE       \
 426         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 427
 428 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 429 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 430 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 431 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 432 #define CONFIG_SERIAL_MULTI             /* Enable both serial ports */
 433 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 434
 435
 436 /* Use the HUSH parser */
 437 #define CONFIG_SYS_HUSH_PARSER
 438 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 439
 440 /* pass open firmware flat tree */
 441 #define CONFIG_OF_LIBFDT
 442 #define CONFIG_OF_BOARD_SETUP
 443 #define CONFIG_OF_STDOUT_VIA_ALIAS
 444
 445 /* new uImage format support */
 446 #define CONFIG_FIT
 447 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 448
 449 /* I2C */
 450 #define CONFIG_FSL_I2C          /* Use FSL common I2C driver */
 451 #define CONFIG_HARD_I2C         /* I2C with hardware support */
 452 #define CONFIG_I2C_MULTI_BUS
 453 #define CONFIG_I2C_CMD_TREE
 454 #define CONFIG_SYS_I2C_SPEED            400000  /* I2C speed in Hz */
 455 #define CONFIG_SYS_I2C_SLAVE            0x7F
 456 #define CONFIG_SYS_I2C_OFFSET           0x118000
 457 #define CONFIG_SYS_I2C2_OFFSET          0x119000
 458
 459 /*
 460  * RTC configuration
 461  */
 462 #define RTC
 463 #define CONFIG_RTC_DS3231               1
 464 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 465
 466 /*
 467  * RapidIO
 468  */
 469 #ifdef CONFIG_SYS_SRIO
 470 #ifdef CONFIG_SRIO1
 471 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 472 #ifdef CONFIG_PHYS_64BIT
 473 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 474 #else
 475 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 476 #endif
 477 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 478 #endif
 479
 480 #ifdef CONFIG_SRIO2
 481 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 482 #ifdef CONFIG_PHYS_64BIT
 483 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 484 #else
 485 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 486 #endif
 487 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 488 #endif
 489 #endif
 490
 491 /*
 492  * for slave u-boot IMAGE instored in master memory space,
 493  * PHYS must be aligned based on the SIZE
 494  */
 495 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull
 496 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull
 497 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000        /* 512K */
 498 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull
 499 /*
 500  * for slave UCODE and ENV instored in master memory space,
 501  * PHYS must be aligned based on the SIZE
 502  */
 503 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull
 504 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 505 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 506
 507 /* slave core release by master*/
 508 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 509 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 510
 511 /*
 512  * SRIO_PCIE_BOOT - SLAVE
 513  */
 514 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 515 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 516 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 517                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 518 #endif
 519
 520 /*
 521  * eSPI - Enhanced SPI
 522  */
 523 #define CONFIG_FSL_ESPI
 524 #define CONFIG_SPI_FLASH
 525 #define CONFIG_SPI_FLASH_SST
 526 #define CONFIG_CMD_SF
 527 #define CONFIG_SF_DEFAULT_SPEED         10000000
 528 #define CONFIG_SF_DEFAULT_MODE          0
 529
 530 /*
 531  * General PCI
 532  * Memory space is mapped 1-1, but I/O space must start from 0.
 533  */
 534
 535 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 536 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 537 #ifdef CONFIG_PHYS_64BIT
 538 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 539 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 540 #else
 541 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 542 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 543 #endif
 544 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 545 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 546 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 547 #ifdef CONFIG_PHYS_64BIT
 548 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 549 #else
 550 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 551 #endif
 552 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 553
 554 /* Qman/Bman */
 555 #ifndef CONFIG_NOBQFMAN
 556 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 557 #define CONFIG_SYS_BMAN_NUM_PORTALS     25
 558 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 559 #ifdef CONFIG_PHYS_64BIT
 560 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 561 #else
 562 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 563 #endif
 564 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 565 #define CONFIG_SYS_QMAN_NUM_PORTALS     25
 566 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 567 #ifdef CONFIG_PHYS_64BIT
 568 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 569 #else
 570 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 571 #endif
 572 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 573
 574 #define CONFIG_SYS_DPAA_FMAN
 575
 576 /* Default address of microcode for the Linux Fman driver */
 577 #if defined(CONFIG_SPIFLASH)
 578 /*
 579  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 580  * env, so we got 0x110000.
 581  */
 582 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 583 #define CONFIG_SYS_QE_FMAN_FW_ADDR      0x110000
 584 #elif defined(CONFIG_SDCARD)
 585 /*
 586  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 587  * about 545KB (1089 blocks), Env is stored after the image, and the env size is
 588  * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130.
 589  */
 590 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 591 #define CONFIG_SYS_QE_FMAN_FW_ADDR      (512 * 1130)
 592 #elif defined(CONFIG_NAND)
 593 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 594 #define CONFIG_SYS_QE_FMAN_FW_ADDR      (6 * CONFIG_SYS_NAND_BLOCK_SIZE)
 595 #else
 596 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 597 #define CONFIG_SYS_QE_FMAN_FW_ADDR              0xEFF40000
 598 #endif
 599 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 600 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 601 #endif /* CONFIG_NOBQFMAN */
 602
 603 #ifdef CONFIG_SYS_DPAA_FMAN
 604 #define CONFIG_FMAN_ENET
 605 #define CONFIG_PHYLIB_10G
 606 #define CONFIG_PHY_VITESSE
 607 #define CONFIG_PHY_TERANETICS
 608 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 609 #define SGMII_CARD_PORT2_PHY_ADDR 0x10
 610 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 611 #define SGMII_CARD_PORT4_PHY_ADDR 0x11
 612 #endif
 613
 614 #ifdef CONFIG_PCI
 615 #define CONFIG_NET_MULTI
 616 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 617 #define CONFIG_E1000
 618
 619 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 620 #define CONFIG_DOS_PARTITION
 621 #endif  /* CONFIG_PCI */
 622
 623 #ifdef CONFIG_FMAN_ENET
 624 #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR  0x10
 625 #define CONFIG_SYS_FM1_DTSEC6_PHY_ADDR  0x11
 626 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR  4
 627
 628 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
 629 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
 630 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
 631 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
 632
 633 #define CONFIG_MII              /* MII PHY management */
 634 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 635 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 636 #endif
 637
 638 /*
 639  * Environment
 640  */
 641 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 642 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 643
 644 /*
 645  * Command line configuration.
 646  */
 647 #include <config_cmd_default.h>
 648
 649 #define CONFIG_CMD_DATE
 650 #define CONFIG_CMD_DHCP
 651 #define CONFIG_CMD_EEPROM
 652 #define CONFIG_CMD_ELF
 653 #define CONFIG_CMD_ERRATA
 654 #define CONFIG_CMD_GREPENV
 655 #define CONFIG_CMD_IRQ
 656 #define CONFIG_CMD_I2C
 657 #define CONFIG_CMD_MII
 658 #define CONFIG_CMD_PING
 659 #define CONFIG_CMD_REGINFO
 660 #define CONFIG_CMD_SETEXPR
 661
 662 #ifdef CONFIG_PCI
 663 #define CONFIG_CMD_PCI
 664 #define CONFIG_CMD_NET
 665 #endif
 666
 667 /*
 668 * USB
 669 */
 670 #define CONFIG_HAS_FSL_DR_USB
 671
 672 #ifdef CONFIG_HAS_FSL_DR_USB
 673 #define CONFIG_USB_EHCI
 674
 675 #ifdef CONFIG_USB_EHCI
 676 #define CONFIG_CMD_USB
 677 #define CONFIG_USB_STORAGE
 678 #define CONFIG_USB_EHCI_FSL
 679 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 680 #define CONFIG_CMD_EXT2
 681 #endif
 682 #endif
 683
 684 /*
 685  * Miscellaneous configurable options
 686  */
 687 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 688 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 689 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 690 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 691 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 692 #ifdef CONFIG_CMD_KGDB
 693 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 694 #else
 695 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 696 #endif
 697 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 698 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 699 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 700 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1ms ticks*/
 701
 702 /*
 703  * For booting Linux, the board info and command line data
 704  * have to be in the first 64 MB of memory, since this is
 705  * the maximum mapped by the Linux kernel during initialization.
 706  */
 707 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 708 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 709
 710 #ifdef CONFIG_CMD_KGDB
 711 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 712 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 713 #endif
 714
 715 /*
 716  * Environment Configuration
 717  */
 718 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 719 #define CONFIG_BOOTFILE         "uImage"
 720 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 721
 722 /* default location for tftp and bootm */
 723 #define CONFIG_LOADADDR         1000000
 724
 725 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 726
 727 #define CONFIG_BAUDRATE 115200
 728
 729 #define __USB_PHY_TYPE  ulpi
 730
 731 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 732         "hwconfig=fsl_ddr:ctlr_intlv=null,"             \
 733         "bank_intlv=cs0_cs1;"                                   \
 734         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 735         "netdev=eth0\0"                                         \
 736         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 737         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"                     \
 738         "tftpflash=tftpboot $loadaddr $uboot && "               \
 739         "protect off $ubootaddr +$filesize && "                 \
 740         "erase $ubootaddr +$filesize && "                       \
 741         "cp.b $loadaddr $ubootaddr $filesize && "               \
 742         "protect on $ubootaddr +$filesize && "                  \
 743         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 744         "consoledev=ttyS0\0"                                    \
 745         "ramdiskaddr=2000000\0"                                 \
 746         "ramdiskfile=b4860qds/ramdisk.uboot\0"                  \
 747         "fdtaddr=c00000\0"                                      \
 748         "fdtfile=b4860qds/b4860qds.dtb\0"                               \
 749         "bdev=sda3\0"                                           \
 750         "c=ffe\0"
 751
 752 /* For emulation this causes u-boot to jump to the start of the proof point
 753    app code automatically */
 754 #define CONFIG_PROOF_POINTS                     \
 755  "setenv bootargs root=/dev/$bdev rw "          \
 756  "console=$consoledev,$baudrate $othbootargs;"  \
 757  "cpu 1 release 0x29000000 - - -;"              \
 758  "cpu 2 release 0x29000000 - - -;"              \
 759  "cpu 3 release 0x29000000 - - -;"              \
 760  "cpu 4 release 0x29000000 - - -;"              \
 761  "cpu 5 release 0x29000000 - - -;"              \
 762  "cpu 6 release 0x29000000 - - -;"              \
 763  "cpu 7 release 0x29000000 - - -;"              \
 764  "go 0x29000000"
 765
 766 #define CONFIG_HVBOOT   \
 767  "setenv bootargs config-addr=0x60000000; "     \
 768  "bootm 0x01000000 - 0x00f00000"
 769
 770 #define CONFIG_ALU                              \
 771  "setenv bootargs root=/dev/$bdev rw "          \
 772  "console=$consoledev,$baudrate $othbootargs;"  \
 773  "cpu 1 release 0x01000000 - - -;"              \
 774  "cpu 2 release 0x01000000 - - -;"              \
 775  "cpu 3 release 0x01000000 - - -;"              \
 776  "cpu 4 release 0x01000000 - - -;"              \
 777  "cpu 5 release 0x01000000 - - -;"              \
 778  "cpu 6 release 0x01000000 - - -;"              \
 779  "cpu 7 release 0x01000000 - - -;"              \
 780  "go 0x01000000"
 781
 782 #define CONFIG_LINUX                            \
 783  "setenv bootargs root=/dev/ram rw "            \
 784  "console=$consoledev,$baudrate $othbootargs;"  \
 785  "setenv ramdiskaddr 0x02000000;"               \
 786  "setenv fdtaddr 0x00c00000;"                   \
 787  "setenv loadaddr 0x1000000;"                   \
 788  "bootm $loadaddr $ramdiskaddr $fdtaddr"
 789
 790 #define CONFIG_HDBOOT                                   \
 791         "setenv bootargs root=/dev/$bdev rw "           \
 792         "console=$consoledev,$baudrate $othbootargs;"   \
 793         "tftp $loadaddr $bootfile;"                     \
 794         "tftp $fdtaddr $fdtfile;"                       \
 795         "bootm $loadaddr - $fdtaddr"
 796
 797 #define CONFIG_NFSBOOTCOMMAND                   \
 798         "setenv bootargs root=/dev/nfs rw "     \
 799         "nfsroot=$serverip:$rootpath "          \
 800         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 801         "console=$consoledev,$baudrate $othbootargs;"   \
 802         "tftp $loadaddr $bootfile;"             \
 803         "tftp $fdtaddr $fdtfile;"               \
 804         "bootm $loadaddr - $fdtaddr"
 805
 806 #define CONFIG_RAMBOOTCOMMAND                           \
 807         "setenv bootargs root=/dev/ram rw "             \
 808         "console=$consoledev,$baudrate $othbootargs;"   \
 809         "tftp $ramdiskaddr $ramdiskfile;"               \
 810         "tftp $loadaddr $bootfile;"                     \
 811         "tftp $fdtaddr $fdtfile;"                       \
 812         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 813
 814 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 815
 816 #ifdef CONFIG_SECURE_BOOT
 817 #include <asm/fsl_secure_boot.h>
 818 #endif
 819
 820 #endif  /* __CONFIG_H */