include/configs/MPC8315ERDB.h

   1 /*
   2  * Copyright (C) 2007-2009 Freescale Semiconductor, Inc.
   3  *
   4  * Dave Liu <daveliu@freescale.com>
   5  *
   6  * See file CREDITS for list of people who contributed to this
   7  * project.
   8  *
   9  * This program is free software; you can redistribute it and/or
  10  * modify it under the terms of the GNU General Public License as
  11  * published by the Free Software Foundation; either version 2 of
  12  * the License, or (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  22  * MA 02111-1307 USA
  23  */
  24
  25 #ifndef __CONFIG_H
  26 #define __CONFIG_H
  27
  28 #ifdef CONFIG_MK_NAND
  29 #define CONFIG_NAND_U_BOOT              1
  30 #define CONFIG_RAMBOOT_TEXT_BASE        0x00100000
  31 #endif
  32
  33 /*
  34  * High Level Configuration Options
  35  */
  36 #define CONFIG_E300             1 /* E300 family */
  37 #define CONFIG_MPC83xx          1 /* MPC83xx family */
  38 #define CONFIG_MPC831x          1 /* MPC831x CPU family */
  39 #define CONFIG_MPC8315          1 /* MPC8315 CPU specific */
  40 #define CONFIG_MPC8315ERDB      1 /* MPC8315ERDB board specific */
  41
  42 /*
  43  * System Clock Setup
  44  */
  45 #define CONFIG_83XX_CLKIN       66666667 /* in Hz */
  46 #define CONFIG_SYS_CLK_FREQ     CONFIG_83XX_CLKIN
  47
  48 /*
  49  * Hardware Reset Configuration Word
  50  * if CLKIN is 66.66MHz, then
  51  * CSB = 133MHz, CORE = 400MHz, DDRC = 266MHz, LBC = 133MHz
  52  */
  53 #define CONFIG_SYS_HRCW_LOW (\
  54         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
  55         HRCWL_DDR_TO_SCB_CLK_2X1 |\
  56         HRCWL_SVCOD_DIV_2 |\
  57         HRCWL_CSB_TO_CLKIN_2X1 |\
  58         HRCWL_CORE_TO_CSB_3X1)
  59 #define CONFIG_SYS_HRCW_HIGH_BASE (\
  60         HRCWH_PCI_HOST |\
  61         HRCWH_PCI1_ARBITER_ENABLE |\
  62         HRCWH_CORE_ENABLE |\
  63         HRCWH_BOOTSEQ_DISABLE |\
  64         HRCWH_SW_WATCHDOG_DISABLE |\
  65         HRCWH_TSEC1M_IN_RGMII |\
  66         HRCWH_TSEC2M_IN_RGMII |\
  67         HRCWH_BIG_ENDIAN |\
  68         HRCWH_LALE_NORMAL)
  69
  70 #ifdef CONFIG_NAND_SPL
  71 #define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE |\
  72                        HRCWH_FROM_0XFFF00100 |\
  73                        HRCWH_ROM_LOC_NAND_SP_8BIT |\
  74                        HRCWH_RL_EXT_NAND)
  75 #else
  76 #define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE |\
  77                        HRCWH_FROM_0X00000100 |\
  78                        HRCWH_ROM_LOC_LOCAL_16BIT |\
  79                        HRCWH_RL_EXT_LEGACY)
  80 #endif
  81
  82 /*
  83  * System IO Config
  84  */
  85 #define CONFIG_SYS_SICRH                0x00000000
  86 #define CONFIG_SYS_SICRL                0x00000000 /* 3.3V, no delay */
  87
  88 #define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
  89 #define CONFIG_HWCONFIG
  90
  91 /*
  92  * IMMR new address
  93  */
  94 #define CONFIG_SYS_IMMR         0xE0000000
  95
  96 #if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
  97 #define CONFIG_DEFAULT_IMMR     CONFIG_SYS_IMMR
  98 #endif
  99
 100 /*
 101  * Arbiter Setup
 102  */
 103 #define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth is 4 */
 104 #define CONFIG_SYS_ACR_RPTCNT           3 /* Arbiter repeat count is 4 */
 105 #define CONFIG_SYS_SPCR_TSECEP          3 /* eTSEC emergency priority is highest */
 106
 107 /*
 108  * DDR Setup
 109  */
 110 #define CONFIG_SYS_DDR_BASE             0x00000000 /* DDR is system memory */
 111 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_BASE
 112 #define CONFIG_SYS_DDR_SDRAM_BASE       CONFIG_SYS_DDR_BASE
 113 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL   DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
 114 #define CONFIG_SYS_DDRCDR_VALUE ( DDRCDR_EN \
 115                                 | DDRCDR_PZ_LOZ \
 116                                 | DDRCDR_NZ_LOZ \
 117                                 | DDRCDR_ODT \
 118                                 | DDRCDR_Q_DRN )
 119                                 /* 0x7b880001 */
 120 /*
 121  * Manually set up DDR parameters
 122  * consist of two chips HY5PS12621BFP-C4 from HYNIX
 123  */
 124 #define CONFIG_SYS_DDR_SIZE             128 /* MB */
 125 #define CONFIG_SYS_DDR_CS0_BNDS 0x00000007
 126 #define CONFIG_SYS_DDR_CS0_CONFIG       ( CSCONFIG_EN \
 127                                 | 0x00010000  /* ODT_WR to CSn */ \
 128                                 | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10 )
 129                                 /* 0x80010102 */
 130 #define CONFIG_SYS_DDR_TIMING_3 0x00000000
 131 #define CONFIG_SYS_DDR_TIMING_0 ( ( 0 << TIMING_CFG0_RWT_SHIFT ) \
 132                                 | ( 0 << TIMING_CFG0_WRT_SHIFT ) \
 133                                 | ( 0 << TIMING_CFG0_RRT_SHIFT ) \
 134                                 | ( 0 << TIMING_CFG0_WWT_SHIFT ) \
 135                                 | ( 2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT ) \
 136                                 | ( 2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT ) \
 137                                 | ( 8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT ) \
 138                                 | ( 2 << TIMING_CFG0_MRS_CYC_SHIFT ) )
 139                                 /* 0x00220802 */
 140 #define CONFIG_SYS_DDR_TIMING_1 ( ( 2 << TIMING_CFG1_PRETOACT_SHIFT ) \
 141                                 | ( 7 << TIMING_CFG1_ACTTOPRE_SHIFT ) \
 142                                 | ( 2 << TIMING_CFG1_ACTTORW_SHIFT ) \
 143                                 | ( 5 << TIMING_CFG1_CASLAT_SHIFT ) \
 144                                 | ( 6 << TIMING_CFG1_REFREC_SHIFT ) \
 145                                 | ( 2 << TIMING_CFG1_WRREC_SHIFT ) \
 146                                 | ( 2 << TIMING_CFG1_ACTTOACT_SHIFT ) \
 147                                 | ( 2 << TIMING_CFG1_WRTORD_SHIFT ) )
 148                                 /* 0x27256222 */
 149 #define CONFIG_SYS_DDR_TIMING_2 ( ( 1 << TIMING_CFG2_ADD_LAT_SHIFT ) \
 150                                 | ( 4 << TIMING_CFG2_CPO_SHIFT ) \
 151                                 | ( 2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT ) \
 152                                 | ( 2 << TIMING_CFG2_RD_TO_PRE_SHIFT ) \
 153                                 | ( 2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT ) \
 154                                 | ( 3 << TIMING_CFG2_CKE_PLS_SHIFT ) \
 155                                 | ( 5 << TIMING_CFG2_FOUR_ACT_SHIFT) )
 156                                 /* 0x121048c5 */
 157 #define CONFIG_SYS_DDR_INTERVAL ( ( 0x0360 << SDRAM_INTERVAL_REFINT_SHIFT ) \
 158                                 | ( 0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) )
 159                                 /* 0x03600100 */
 160 #define CONFIG_SYS_DDR_SDRAM_CFG        ( SDRAM_CFG_SREN \
 161                                 | SDRAM_CFG_SDRAM_TYPE_DDR2 \
 162                                 | SDRAM_CFG_32_BE )
 163                                 /* 0x43080000 */
 164 #define CONFIG_SYS_DDR_SDRAM_CFG2       0x00401000 /* 1 posted refresh */
 165 #define CONFIG_SYS_DDR_MODE             ( ( 0x0448 << SDRAM_MODE_ESD_SHIFT ) \
 166                                 | ( 0x0232 << SDRAM_MODE_SD_SHIFT ) )
 167                                 /* ODT 150ohm CL=3, AL=1 on SDRAM */
 168 #define CONFIG_SYS_DDR_MODE2            0x00000000
 169
 170 /*
 171  * Memory test
 172  */
 173 #undef CONFIG_SYS_DRAM_TEST             /* memory test, takes time */
 174 #define CONFIG_SYS_MEMTEST_START        0x00040000 /* memtest region */
 175 #define CONFIG_SYS_MEMTEST_END          0x00140000
 176
 177 /*
 178  * The reserved memory
 179  */
 180 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
 181
 182 #define CONFIG_SYS_MONITOR_LEN          (384 * 1024) /* Reserve 384 kB for Mon */
 183 #define CONFIG_SYS_MALLOC_LEN           (512 * 1024) /* Reserved for malloc */
 184
 185 /*
 186  * Initial RAM Base Address Setup
 187  */
 188 #define CONFIG_SYS_INIT_RAM_LOCK        1
 189 #define CONFIG_SYS_INIT_RAM_ADDR        0xE6000000 /* Initial RAM address */
 190 #define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM */
 191 #define CONFIG_SYS_GBL_DATA_SIZE        0x100 /* num bytes initial data */
 192 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 193
 194 /*
 195  * Local Bus Configuration & Clock Setup
 196  */
 197 #define CONFIG_SYS_LCRR_DBYP    LCRR_DBYP
 198 #define CONFIG_SYS_LCRR_CLKDIV          LCRR_CLKDIV_2
 199 #define CONFIG_SYS_LBC_LBCR             0x00040000
 200
 201 /*
 202  * FLASH on the Local Bus
 203  */
 204 #define CONFIG_SYS_FLASH_CFI            /* use the Common Flash Interface */
 205 #define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
 206 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
 207
 208 #define CONFIG_SYS_FLASH_BASE           0xFE000000 /* FLASH base address */
 209 #define CONFIG_SYS_FLASH_SIZE           8 /* FLASH size is 8M */
 210 #define CONFIG_SYS_FLASH_PROTECTION     1               /* Use h/w Flash protection. */
 211
 212 #define CONFIG_SYS_LBLAWBAR0_PRELIM     CONFIG_SYS_FLASH_BASE /* Window base at flash base */
 213 #define CONFIG_SYS_LBLAWAR0_PRELIM      0x80000016 /* 8MB window size */
 214
 215 #define CONFIG_SYS_NOR_BR_PRELIM        (CONFIG_SYS_FLASH_BASE \
 216                                 | (2 << BR_PS_SHIFT)    /* 16 bit port size */ \
 217                                 | BR_V )                /* valid */
 218 #define CONFIG_SYS_NOR_OR_PRELIM        ((~(CONFIG_SYS_FLASH_SIZE - 1) << 20) \
 219                                 | OR_UPM_XAM \
 220                                 | OR_GPCM_CSNT \
 221                                 | OR_GPCM_ACS_DIV2 \
 222                                 | OR_GPCM_XACS \
 223                                 | OR_GPCM_SCY_15 \
 224                                 | OR_GPCM_TRLX \
 225                                 | OR_GPCM_EHTR \
 226                                 | OR_GPCM_EAD )
 227
 228 #define CONFIG_SYS_MAX_FLASH_BANKS      1 /* number of banks */
 229 #define CONFIG_SYS_MAX_FLASH_SECT       135 /* 127 64KB sectors and 8 8KB top sectors per device */
 230
 231 #undef CONFIG_SYS_FLASH_CHECKSUM
 232 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000 /* Flash Erase Timeout (ms) */
 233 #define CONFIG_SYS_FLASH_WRITE_TOUT     500 /* Flash Write Timeout (ms) */
 234
 235 /*
 236  * NAND Flash on the Local Bus
 237  */
 238
 239 #ifdef CONFIG_NAND_SPL
 240 #define CONFIG_SYS_NAND_BASE            0xFFF00000
 241 #else
 242 #define CONFIG_SYS_NAND_BASE            0xE0600000
 243 #endif
 244
 245 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 246 #define CONFIG_MTD_NAND_VERIFY_WRITE    1
 247 #define CONFIG_CMD_NAND                 1
 248 #define CONFIG_NAND_FSL_ELBC            1
 249 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384
 250
 251 #define CONFIG_SYS_NAND_U_BOOT_SIZE  (512 << 10)
 252 #define CONFIG_SYS_NAND_U_BOOT_DST   0x00100000
 253 #define CONFIG_SYS_NAND_U_BOOT_START 0x00100100
 254 #define CONFIG_SYS_NAND_U_BOOT_OFFS  16384
 255 #define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000
 256
 257 #define CONFIG_SYS_NAND_BR_PRELIM       (CONFIG_SYS_NAND_BASE \
 258                                 | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 259                                 | BR_PS_8               /* Port Size = 8 bit */ \
 260                                 | BR_MS_FCM             /* MSEL = FCM */ \
 261                                 | BR_V )                /* valid */
 262 #define CONFIG_SYS_NAND_OR_PRELIM       (0xFFFF8000     /* length 32K */ \
 263                                 | OR_FCM_CSCT \
 264                                 | OR_FCM_CST \
 265                                 | OR_FCM_CHT \
 266                                 | OR_FCM_SCY_1 \
 267                                 | OR_FCM_TRLX \
 268                                 | OR_FCM_EHTR )
 269                                 /* 0xFFFF8396 */
 270
 271 #ifdef CONFIG_NAND_U_BOOT
 272 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM
 273 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM
 274 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NOR_BR_PRELIM
 275 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NOR_OR_PRELIM
 276 #else
 277 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NOR_BR_PRELIM
 278 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NOR_OR_PRELIM
 279 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM
 280 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM
 281 #endif
 282
 283 #define CONFIG_SYS_LBLAWBAR1_PRELIM     CONFIG_SYS_NAND_BASE
 284 #define CONFIG_SYS_LBLAWAR1_PRELIM      0x8000000E      /* 32KB  */
 285
 286 #define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM
 287 #define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM
 288
 289 #if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE && \
 290         !defined(CONFIG_NAND_SPL)
 291 #define CONFIG_SYS_RAMBOOT
 292 #else
 293 #undef CONFIG_SYS_RAMBOOT
 294 #endif
 295
 296 /*
 297  * Serial Port
 298  */
 299 #define CONFIG_CONS_INDEX       1
 300 #undef CONFIG_SERIAL_SOFTWARE_FIFO
 301 #define CONFIG_SYS_NS16550
 302 #define CONFIG_SYS_NS16550_SERIAL
 303 #define CONFIG_SYS_NS16550_REG_SIZE     1
 304 #define CONFIG_SYS_NS16550_CLK          (CONFIG_83XX_CLKIN * 2)
 305
 306 #define CONFIG_SYS_BAUDRATE_TABLE  \
 307         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 308
 309 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
 310 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
 311
 312 /* Use the HUSH parser */
 313 #define CONFIG_SYS_HUSH_PARSER
 314 #ifdef CONFIG_SYS_HUSH_PARSER
 315 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 316 #endif
 317
 318 /* Pass open firmware flat tree */
 319 #define CONFIG_OF_LIBFDT        1
 320 #define CONFIG_OF_BOARD_SETUP   1
 321 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
 322
 323 /* I2C */
 324 #define CONFIG_HARD_I2C         /* I2C with hardware support */
 325 #define CONFIG_FSL_I2C
 326 #define CONFIG_SYS_I2C_SPEED            400000 /* I2C speed and slave address */
 327 #define CONFIG_SYS_I2C_SLAVE            0x7F
 328 #define CONFIG_SYS_I2C_NOPROBES {0x51} /* Don't probe these addrs */
 329 #define CONFIG_SYS_I2C_OFFSET           0x3000
 330 #define CONFIG_SYS_I2C2_OFFSET          0x3100
 331
 332 /*
 333  * Board info - revision and where boot from
 334  */
 335 #define CONFIG_SYS_I2C_PCF8574A_ADDR    0x39
 336
 337 /*
 338  * Config on-board RTC
 339  */
 340 #define CONFIG_RTC_DS1337       /* ds1339 on board, use ds1337 rtc via i2c */
 341 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */
 342
 343 /*
 344  * General PCI
 345  * Addresses are mapped 1-1.
 346  */
 347 #define CONFIG_SYS_PCI_MEM_BASE 0x80000000
 348 #define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BASE
 349 #define CONFIG_SYS_PCI_MEM_SIZE 0x10000000 /* 256M */
 350 #define CONFIG_SYS_PCI_MMIO_BASE        0x90000000
 351 #define CONFIG_SYS_PCI_MMIO_PHYS        CONFIG_SYS_PCI_MMIO_BASE
 352 #define CONFIG_SYS_PCI_MMIO_SIZE        0x10000000 /* 256M */
 353 #define CONFIG_SYS_PCI_IO_BASE          0x00000000
 354 #define CONFIG_SYS_PCI_IO_PHYS          0xE0300000
 355 #define CONFIG_SYS_PCI_IO_SIZE          0x100000 /* 1M */
 356
 357 #define CONFIG_SYS_PCI_SLV_MEM_LOCAL    CONFIG_SYS_SDRAM_BASE
 358 #define CONFIG_SYS_PCI_SLV_MEM_BUS      0x00000000
 359 #define CONFIG_SYS_PCI_SLV_MEM_SIZE     0x80000000
 360
 361 #define CONFIG_SYS_PCIE1_BASE           0xA0000000
 362 #define CONFIG_SYS_PCIE1_MEM_BASE       0xA0000000
 363 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xA0000000
 364 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000
 365 #define CONFIG_SYS_PCIE1_CFG_BASE       0xB0000000
 366 #define CONFIG_SYS_PCIE1_CFG_SIZE       0x01000000
 367 #define CONFIG_SYS_PCIE1_IO_BASE        0x00000000
 368 #define CONFIG_SYS_PCIE1_IO_PHYS        0xB1000000
 369 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00800000
 370
 371 #define CONFIG_SYS_PCIE2_BASE           0xC0000000
 372 #define CONFIG_SYS_PCIE2_MEM_BASE       0xC0000000
 373 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xC0000000
 374 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000
 375 #define CONFIG_SYS_PCIE2_CFG_BASE       0xD0000000
 376 #define CONFIG_SYS_PCIE2_CFG_SIZE       0x01000000
 377 #define CONFIG_SYS_PCIE2_IO_BASE        0x00000000
 378 #define CONFIG_SYS_PCIE2_IO_PHYS        0xD1000000
 379 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00800000
 380
 381 #define CONFIG_PCI
 382 #define CONFIG_PCIE
 383
 384 #define CONFIG_NET_MULTI
 385 #define CONFIG_PCI_PNP          /* do pci plug-and-play */
 386
 387 #define CONFIG_EEPRO100
 388 #undef CONFIG_PCI_SCAN_SHOW     /* show pci devices on startup */
 389 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957   /* Freescale */
 390
 391 #ifndef CONFIG_NET_MULTI
 392 #define CONFIG_NET_MULTI        1
 393 #endif
 394
 395 #define CONFIG_HAS_FSL_DR_USB
 396 #define CONFIG_SYS_SCCR_USBDRCM         3
 397
 398 #define CONFIG_CMD_USB
 399 #define CONFIG_USB_STORAGE
 400 #define CONFIG_USB_EHCI
 401 #define CONFIG_USB_EHCI_FSL
 402 #define CONFIG_USB_PHY_TYPE     "utmi"
 403 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 404
 405 /*
 406  * TSEC
 407  */
 408 #define CONFIG_TSEC_ENET        /* TSEC ethernet support */
 409 #define CONFIG_SYS_TSEC1_OFFSET 0x24000
 410 #define CONFIG_SYS_TSEC1                (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
 411 #define CONFIG_SYS_TSEC2_OFFSET 0x25000
 412 #define CONFIG_SYS_TSEC2                (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET)
 413
 414 /*
 415  * TSEC ethernet configuration
 416  */
 417 #define CONFIG_MII              1 /* MII PHY management */
 418 #define CONFIG_TSEC1            1
 419 #define CONFIG_TSEC1_NAME       "eTSEC0"
 420 #define CONFIG_TSEC2            1
 421 #define CONFIG_TSEC2_NAME       "eTSEC1"
 422 #define TSEC1_PHY_ADDR          0
 423 #define TSEC2_PHY_ADDR          1
 424 #define TSEC1_PHYIDX            0
 425 #define TSEC2_PHYIDX            0
 426 #define TSEC1_FLAGS             TSEC_GIGABIT
 427 #define TSEC2_FLAGS             TSEC_GIGABIT
 428
 429 /* Options are: eTSEC[0-1] */
 430 #define CONFIG_ETHPRIME         "eTSEC1"
 431
 432 /*
 433  * SATA
 434  */
 435 #define CONFIG_LIBATA
 436 #define CONFIG_FSL_SATA
 437
 438 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 439 #define CONFIG_SATA1
 440 #define CONFIG_SYS_SATA1_OFFSET 0x18000
 441 #define CONFIG_SYS_SATA1                (CONFIG_SYS_IMMR + CONFIG_SYS_SATA1_OFFSET)
 442 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 443 #define CONFIG_SATA2
 444 #define CONFIG_SYS_SATA2_OFFSET 0x19000
 445 #define CONFIG_SYS_SATA2                (CONFIG_SYS_IMMR + CONFIG_SYS_SATA2_OFFSET)
 446 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 447
 448 #ifdef CONFIG_FSL_SATA
 449 #define CONFIG_LBA48
 450 #define CONFIG_CMD_SATA
 451 #define CONFIG_DOS_PARTITION
 452 #define CONFIG_CMD_EXT2
 453 #endif
 454
 455 /*
 456  * Environment
 457  */
 458 #if defined(CONFIG_NAND_U_BOOT)
 459         #define CONFIG_ENV_IS_IN_NAND   1
 460         #define CONFIG_ENV_OFFSET               (512 * 1024)
 461         #define CONFIG_ENV_SECT_SIZE    CONFIG_SYS_NAND_BLOCK_SIZE
 462         #define CONFIG_ENV_SIZE         CONFIG_ENV_SECT_SIZE
 463         #define CONFIG_ENV_SIZE_REDUND  CONFIG_ENV_SIZE
 464         #define CONFIG_ENV_RANGE        (CONFIG_ENV_SECT_SIZE * 4)
 465         #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + \
 466                                                  CONFIG_ENV_RANGE)
 467 #elif !defined(CONFIG_SYS_RAMBOOT)
 468         #define CONFIG_ENV_IS_IN_FLASH  1
 469         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 470         #define CONFIG_ENV_SECT_SIZE    0x10000 /* 64K(one sector) for env */
 471         #define CONFIG_ENV_SIZE         0x2000
 472 #else
 473         #define CONFIG_SYS_NO_FLASH             1       /* Flash is not usable now */
 474         #define CONFIG_ENV_IS_NOWHERE   1       /* Store ENV in memory only */
 475         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 476         #define CONFIG_ENV_SIZE         0x2000
 477 #endif
 478
 479 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 480 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 481
 482 /*
 483  * BOOTP options
 484  */
 485 #define CONFIG_BOOTP_BOOTFILESIZE
 486 #define CONFIG_BOOTP_BOOTPATH
 487 #define CONFIG_BOOTP_GATEWAY
 488 #define CONFIG_BOOTP_HOSTNAME
 489
 490 /*
 491  * Command line configuration.
 492  */
 493 #include <config_cmd_default.h>
 494
 495 #define CONFIG_CMD_PING
 496 #define CONFIG_CMD_I2C
 497 #define CONFIG_CMD_MII
 498 #define CONFIG_CMD_DATE
 499 #define CONFIG_CMD_PCI
 500
 501 #if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_NAND_U_BOOT)
 502     #undef CONFIG_CMD_SAVEENV
 503     #undef CONFIG_CMD_LOADS
 504 #endif
 505
 506 #define CONFIG_CMDLINE_EDITING  1       /* add command line history */
 507 #define CONFIG_AUTO_COMPLETE            /* add autocompletion support   */
 508
 509 #undef CONFIG_WATCHDOG          /* watchdog disabled */
 510
 511 /*
 512  * Miscellaneous configurable options
 513  */
 514 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 515 #define CONFIG_SYS_LOAD_ADDR            0x2000000 /* default load address */
 516 #define CONFIG_SYS_PROMPT               "=> "   /* Monitor Command Prompt */
 517
 518 #if defined(CONFIG_CMD_KGDB)
 519         #define CONFIG_SYS_CBSIZE       1024 /* Console I/O Buffer Size */
 520 #else
 521         #define CONFIG_SYS_CBSIZE       256 /* Console I/O Buffer Size */
 522 #endif
 523
 524 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 525 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 526 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 527 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1ms ticks */
 528
 529 /*
 530  * For booting Linux, the board info and command line data
 531  * have to be in the first 8 MB of memory, since this is
 532  * the maximum mapped by the Linux kernel during initialization.
 533  */
 534 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20) /* Initial Memory map for Linux */
 535
 536 /*
 537  * Core HID Setup
 538  */
 539 #define CONFIG_SYS_HID0_INIT    0x000000000
 540 #define CONFIG_SYS_HID0_FINAL   (HID0_ENABLE_MACHINE_CHECK | \
 541                                  HID0_ENABLE_INSTRUCTION_CACHE | \
 542                                  HID0_ENABLE_DYNAMIC_POWER_MANAGMENT)
 543 #define CONFIG_SYS_HID2         HID2_HBE
 544
 545 /*
 546  * MMU Setup
 547  */
 548 #define CONFIG_HIGH_BATS        1       /* High BATs supported */
 549
 550 /* DDR: cache cacheable */
 551 #define CONFIG_SYS_IBAT0L       (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
 552 #define CONFIG_SYS_IBAT0U       (CONFIG_SYS_SDRAM_BASE | BATU_BL_128M | BATU_VS | BATU_VP)
 553 #define CONFIG_SYS_DBAT0L       CONFIG_SYS_IBAT0L
 554 #define CONFIG_SYS_DBAT0U       CONFIG_SYS_IBAT0U
 555
 556 /* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */
 557 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_IMMR | BATL_PP_10 | \
 558                         BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 559 #define CONFIG_SYS_IBAT1U       (CONFIG_SYS_IMMR | BATU_BL_8M | BATU_VS | BATU_VP)
 560 #define CONFIG_SYS_DBAT1L       CONFIG_SYS_IBAT1L
 561 #define CONFIG_SYS_DBAT1U       CONFIG_SYS_IBAT1U
 562
 563 /* FLASH: icache cacheable, but dcache-inhibit and guarded */
 564 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
 565 #define CONFIG_SYS_IBAT2U       (CONFIG_SYS_FLASH_BASE | BATU_BL_32M | \
 566                                  BATU_VS | BATU_VP)
 567 #define CONFIG_SYS_DBAT2L       (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \
 568                         BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 569 #define CONFIG_SYS_DBAT2U       CONFIG_SYS_IBAT2U
 570
 571 /* Stack in dcache: cacheable, no memory coherence */
 572 #define CONFIG_SYS_IBAT3L       (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10)
 573 #define CONFIG_SYS_IBAT3U       (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
 574 #define CONFIG_SYS_DBAT3L       CONFIG_SYS_IBAT3L
 575 #define CONFIG_SYS_DBAT3U       CONFIG_SYS_IBAT3U
 576
 577 /* PCI MEM space: cacheable */
 578 #define CONFIG_SYS_IBAT4L       (CONFIG_SYS_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
 579 #define CONFIG_SYS_IBAT4U       (CONFIG_SYS_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
 580 #define CONFIG_SYS_DBAT4L       CONFIG_SYS_IBAT4L
 581 #define CONFIG_SYS_DBAT4U       CONFIG_SYS_IBAT4U
 582
 583 /* PCI MMIO space: cache-inhibit and guarded */
 584 #define CONFIG_SYS_IBAT5L       (CONFIG_SYS_PCI_MMIO_PHYS | BATL_PP_10 | \
 585                         BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 586 #define CONFIG_SYS_IBAT5U       (CONFIG_SYS_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
 587 #define CONFIG_SYS_DBAT5L       CONFIG_SYS_IBAT5L
 588 #define CONFIG_SYS_DBAT5U       CONFIG_SYS_IBAT5U
 589
 590 #define CONFIG_SYS_IBAT6L       0
 591 #define CONFIG_SYS_IBAT6U       0
 592 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
 593 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
 594
 595 #define CONFIG_SYS_IBAT7L       0
 596 #define CONFIG_SYS_IBAT7U       0
 597 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
 598 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
 599
 600 /*
 601  * Internal Definitions
 602  *
 603  * Boot Flags
 604  */
 605 #define BOOTFLAG_COLD   0x01 /* Normal Power-On: Boot from FLASH */
 606 #define BOOTFLAG_WARM   0x02 /* Software reboot */
 607
 608 #if defined(CONFIG_CMD_KGDB)
 609 #define CONFIG_KGDB_BAUDRATE    230400  /* speed of kgdb serial port */
 610 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 611 #endif
 612
 613 /*
 614  * Environment Configuration
 615  */
 616
 617 #define CONFIG_ENV_OVERWRITE
 618
 619 #if defined(CONFIG_TSEC_ENET)
 620 #define CONFIG_HAS_ETH0
 621 #define CONFIG_HAS_ETH1
 622 #endif
 623
 624 #define CONFIG_BAUDRATE 115200
 625
 626 #define CONFIG_LOADADDR 800000  /* default location for tftp and bootm */
 627
 628 #define CONFIG_BOOTDELAY 6      /* -1 disables auto-boot */
 629 #undef CONFIG_BOOTARGS          /* the boot command will set bootargs */
 630
 631 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 632    "netdev=eth0\0"                                                      \
 633    "consoledev=ttyS0\0"                                                 \
 634    "ramdiskaddr=1000000\0"                                              \
 635    "ramdiskfile=ramfs.83xx\0"                                           \
 636    "fdtaddr=780000\0"                                                   \
 637    "fdtfile=mpc8315erdb.dtb\0"                                          \
 638    "usb_phy_type=utmi\0"                                                \
 639    ""
 640
 641 #define CONFIG_NFSBOOTCOMMAND                                           \
 642    "setenv bootargs root=/dev/nfs rw "                                  \
 643       "nfsroot=$serverip:$rootpath "                                    \
 644       "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 645       "console=$consoledev,$baudrate $othbootargs;"                     \
 646    "tftp $loadaddr $bootfile;"                                          \
 647    "tftp $fdtaddr $fdtfile;"                                            \
 648    "bootm $loadaddr - $fdtaddr"
 649
 650 #define CONFIG_RAMBOOTCOMMAND                                           \
 651    "setenv bootargs root=/dev/ram rw "                                  \
 652       "console=$consoledev,$baudrate $othbootargs;"                     \
 653    "tftp $ramdiskaddr $ramdiskfile;"                                    \
 654    "tftp $loadaddr $bootfile;"                                          \
 655    "tftp $fdtaddr $fdtfile;"                                            \
 656    "bootm $loadaddr $ramdiskaddr $fdtaddr"
 657
 658
 659 #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
 660
 661 #endif  /* __CONFIG_H */