include/configs/MPC837XEMDS.h

   1 /*
   2  * Copyright (C) 2007 Freescale Semiconductor, Inc.
   3  * Dave Liu <daveliu@freescale.com>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 /*
  12  * High Level Configuration Options
  13  */
  14 #define CONFIG_E300             1 /* E300 family */
  15 #define CONFIG_MPC837x          1 /* MPC837x CPU specific */
  16 #define CONFIG_MPC837XEMDS      1 /* MPC837XEMDS board specific */
  17
  18 #define CONFIG_SYS_TEXT_BASE    0xFE000000
  19
  20 /*
  21  * System Clock Setup
  22  */
  23 #ifdef CONFIG_PCISLAVE
  24 #define CONFIG_83XX_PCICLK      66000000 /* in HZ */
  25 #else
  26 #define CONFIG_83XX_CLKIN       66000000 /* in Hz */
  27 #endif
  28
  29 #ifndef CONFIG_SYS_CLK_FREQ
  30 #define CONFIG_SYS_CLK_FREQ     66000000
  31 #endif
  32
  33 /*
  34  * Hardware Reset Configuration Word
  35  * if CLKIN is 66MHz, then
  36  * CSB = 396MHz, CORE = 594MHz, DDRC = 396MHz, LBC = 396MHz
  37  */
  38 #define CONFIG_SYS_HRCW_LOW (\
  39         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
  40         HRCWL_DDR_TO_SCB_CLK_1X1 |\
  41         HRCWL_SVCOD_DIV_2 |\
  42         HRCWL_CSB_TO_CLKIN_6X1 |\
  43         HRCWL_CORE_TO_CSB_1_5X1)
  44
  45 #ifdef CONFIG_PCISLAVE
  46 #define CONFIG_SYS_HRCW_HIGH (\
  47         HRCWH_PCI_AGENT |\
  48         HRCWH_PCI1_ARBITER_DISABLE |\
  49         HRCWH_CORE_ENABLE |\
  50         HRCWH_FROM_0XFFF00100 |\
  51         HRCWH_BOOTSEQ_DISABLE |\
  52         HRCWH_SW_WATCHDOG_DISABLE |\
  53         HRCWH_ROM_LOC_LOCAL_16BIT |\
  54         HRCWH_RL_EXT_LEGACY |\
  55         HRCWH_TSEC1M_IN_RGMII |\
  56         HRCWH_TSEC2M_IN_RGMII |\
  57         HRCWH_BIG_ENDIAN |\
  58         HRCWH_LDP_CLEAR)
  59 #else
  60 #define CONFIG_SYS_HRCW_HIGH (\
  61         HRCWH_PCI_HOST |\
  62         HRCWH_PCI1_ARBITER_ENABLE |\
  63         HRCWH_CORE_ENABLE |\
  64         HRCWH_FROM_0X00000100 |\
  65         HRCWH_BOOTSEQ_DISABLE |\
  66         HRCWH_SW_WATCHDOG_DISABLE |\
  67         HRCWH_ROM_LOC_LOCAL_16BIT |\
  68         HRCWH_RL_EXT_LEGACY |\
  69         HRCWH_TSEC1M_IN_RGMII |\
  70         HRCWH_TSEC2M_IN_RGMII |\
  71         HRCWH_BIG_ENDIAN |\
  72         HRCWH_LDP_CLEAR)
  73 #endif
  74
  75 /* Arbiter Configuration Register */
  76 #define CONFIG_SYS_ACR_PIPE_DEP 3       /* Arbiter pipeline depth is 4 */
  77 #define CONFIG_SYS_ACR_RPTCNT   3       /* Arbiter repeat count is 4 */
  78
  79 /* System Priority Control Register */
  80 #define CONFIG_SYS_SPCR_TSECEP  3 /* eTSEC1/2 emergency has highest priority */
  81
  82 /*
  83  * IP blocks clock configuration
  84  */
  85 #define CONFIG_SYS_SCCR_TSEC1CM 1       /* CSB:eTSEC1 = 1:1 */
  86 #define CONFIG_SYS_SCCR_TSEC2CM 1       /* CSB:eTSEC2 = 1:1 */
  87 #define CONFIG_SYS_SCCR_SATACM  SCCR_SATACM_2   /* CSB:SATA[0:3] = 2:1 */
  88
  89 /*
  90  * System IO Config
  91  */
  92 #define CONFIG_SYS_SICRH                0x00000000
  93 #define CONFIG_SYS_SICRL                0x00000000
  94
  95 /*
  96  * Output Buffer Impedance
  97  */
  98 #define CONFIG_SYS_OBIR         0x31100000
  99
 100 #define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
 101 #define CONFIG_BOARD_EARLY_INIT_R
 102 #define CONFIG_HWCONFIG
 103
 104 /*
 105  * IMMR new address
 106  */
 107 #define CONFIG_SYS_IMMR         0xE0000000
 108
 109 /*
 110  * DDR Setup
 111  */
 112 #define CONFIG_SYS_DDR_BASE             0x00000000 /* DDR is system memory */
 113 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_BASE
 114 #define CONFIG_SYS_DDR_SDRAM_BASE       CONFIG_SYS_DDR_BASE
 115 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL   DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
 116 #define CONFIG_SYS_83XX_DDR_USES_CS0
 117 #define CONFIG_SYS_DDRCDR_VALUE         (DDRCDR_DHC_EN \
 118                                         | DDRCDR_ODT \
 119                                         | DDRCDR_Q_DRN)
 120                                         /* 0x80080001 */ /* ODT 150ohm on SoC */
 121
 122 #undef CONFIG_DDR_ECC           /* support DDR ECC function */
 123 #undef CONFIG_DDR_ECC_CMD       /* Use DDR ECC user commands */
 124
 125 #define CONFIG_SPD_EEPROM       /* Use SPD EEPROM for DDR setup */
 126 #define CONFIG_NEVER_ASSERT_ODT_TO_CPU /* Never assert ODT to internal IOs */
 127
 128 #if defined(CONFIG_SPD_EEPROM)
 129 #define SPD_EEPROM_ADDRESS      0x51 /* I2C address of DDR SODIMM SPD */
 130 #else
 131 /*
 132  * Manually set up DDR parameters
 133  * WHITE ELECTRONIC DESIGNS - W3HG64M72EEU403PD4 SO-DIMM
 134  * consist of nine chips from SAMSUNG K4T51083QE-ZC(L)D5
 135  */
 136 #define CONFIG_SYS_DDR_SIZE             512 /* MB */
 137 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000001f
 138 #define CONFIG_SYS_DDR_CS0_CONFIG       (CSCONFIG_EN \
 139                         | CSCONFIG_ODT_RD_NEVER  /* ODT_RD to none */ \
 140                         | CSCONFIG_ODT_WR_ONLY_CURRENT  /* ODT_WR to CSn */ \
 141                         | CSCONFIG_ROW_BIT_14 \
 142                         | CSCONFIG_COL_BIT_10)
 143                         /* 0x80010202 */
 144 #define CONFIG_SYS_DDR_TIMING_3 0x00000000
 145 #define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \
 146                                 | (0 << TIMING_CFG0_WRT_SHIFT) \
 147                                 | (0 << TIMING_CFG0_RRT_SHIFT) \
 148                                 | (0 << TIMING_CFG0_WWT_SHIFT) \
 149                                 | (6 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \
 150                                 | (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \
 151                                 | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \
 152                                 | (2 << TIMING_CFG0_MRS_CYC_SHIFT))
 153                                 /* 0x00620802 */
 154 #define CONFIG_SYS_DDR_TIMING_1 ((3 << TIMING_CFG1_PRETOACT_SHIFT) \
 155                                 | (9 << TIMING_CFG1_ACTTOPRE_SHIFT) \
 156                                 | (3 << TIMING_CFG1_ACTTORW_SHIFT) \
 157                                 | (5 << TIMING_CFG1_CASLAT_SHIFT) \
 158                                 | (13 << TIMING_CFG1_REFREC_SHIFT) \
 159                                 | (3 << TIMING_CFG1_WRREC_SHIFT) \
 160                                 | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \
 161                                 | (2 << TIMING_CFG1_WRTORD_SHIFT))
 162                                 /* 0x3935d322 */
 163 #define CONFIG_SYS_DDR_TIMING_2 ((1 << TIMING_CFG2_ADD_LAT_SHIFT) \
 164                                 | (6 << TIMING_CFG2_CPO_SHIFT) \
 165                                 | (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \
 166                                 | (4 << TIMING_CFG2_RD_TO_PRE_SHIFT) \
 167                                 | (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \
 168                                 | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \
 169                                 | (8 << TIMING_CFG2_FOUR_ACT_SHIFT))
 170                                 /* 0x131088c8 */
 171 #define CONFIG_SYS_DDR_INTERVAL ((0x03E0 << SDRAM_INTERVAL_REFINT_SHIFT) \
 172                                 | (0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
 173                                 /* 0x03E00100 */
 174 #define CONFIG_SYS_DDR_SDRAM_CFG        0x43000000
 175 #define CONFIG_SYS_DDR_SDRAM_CFG2       0x00001000 /* 1 posted refresh */
 176 #define CONFIG_SYS_DDR_MODE     ((0x0448 << SDRAM_MODE_ESD_SHIFT) \
 177                                 | (0x1432 << SDRAM_MODE_SD_SHIFT))
 178                                 /* ODT 150ohm CL=3, AL=1 on SDRAM */
 179 #define CONFIG_SYS_DDR_MODE2    0x00000000
 180 #endif
 181
 182 /*
 183  * Memory test
 184  */
 185 #undef CONFIG_SYS_DRAM_TEST             /* memory test, takes time */
 186 #define CONFIG_SYS_MEMTEST_START        0x00040000 /* memtest region */
 187 #define CONFIG_SYS_MEMTEST_END          0x00140000
 188
 189 /*
 190  * The reserved memory
 191  */
 192 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
 193
 194 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 195 #define CONFIG_SYS_RAMBOOT
 196 #else
 197 #undef CONFIG_SYS_RAMBOOT
 198 #endif
 199
 200 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
 201 #define CONFIG_SYS_MONITOR_LEN  (384 * 1024) /* Reserve 384 kB for Mon */
 202 #define CONFIG_SYS_MALLOC_LEN   (512 * 1024) /* Reserved for malloc */
 203
 204 /*
 205  * Initial RAM Base Address Setup
 206  */
 207 #define CONFIG_SYS_INIT_RAM_LOCK        1
 208 #define CONFIG_SYS_INIT_RAM_ADDR        0xE6000000 /* Initial RAM address */
 209 #define CONFIG_SYS_INIT_RAM_SIZE        0x1000 /* Size of used area in RAM */
 210 #define CONFIG_SYS_GBL_DATA_OFFSET      \
 211                         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 212
 213 /*
 214  * Local Bus Configuration & Clock Setup
 215  */
 216 #define CONFIG_SYS_LCRR_DBYP    LCRR_DBYP
 217 #define CONFIG_SYS_LCRR_CLKDIV  LCRR_CLKDIV_8
 218 #define CONFIG_SYS_LBC_LBCR             0x00000000
 219 #define CONFIG_FSL_ELBC         1
 220
 221 /*
 222  * FLASH on the Local Bus
 223  */
 224 #define CONFIG_SYS_FLASH_CFI    /* use the Common Flash Interface */
 225 #define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
 226 #define CONFIG_SYS_FLASH_BASE   0xFE000000 /* FLASH base address */
 227 #define CONFIG_SYS_FLASH_SIZE   32 /* max FLASH size is 32M */
 228 #define CONFIG_SYS_FLASH_PROTECTION     1       /* Use h/w Flash protection. */
 229
 230                                         /* Window base at flash base */
 231 #define CONFIG_SYS_LBLAWBAR0_PRELIM     CONFIG_SYS_FLASH_BASE
 232 #define CONFIG_SYS_LBLAWAR0_PRELIM      (LBLAWAR_EN | LBLAWAR_32MB)
 233
 234 #define CONFIG_SYS_BR0_PRELIM   (CONFIG_SYS_FLASH_BASE \
 235                                 | BR_PS_16      /* 16 bit port */ \
 236                                 | BR_MS_GPCM    /* MSEL = GPCM */ \
 237                                 | BR_V)         /* valid */
 238 #define CONFIG_SYS_OR0_PRELIM   (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \
 239                                 | OR_UPM_XAM \
 240                                 | OR_GPCM_CSNT \
 241                                 | OR_GPCM_ACS_DIV2 \
 242                                 | OR_GPCM_XACS \
 243                                 | OR_GPCM_SCY_15 \
 244                                 | OR_GPCM_TRLX_SET \
 245                                 | OR_GPCM_EHTR_SET \
 246                                 | OR_GPCM_EAD)
 247                                 /* 0xFE000FF7 */
 248
 249 #define CONFIG_SYS_MAX_FLASH_BANKS      1 /* number of banks */
 250 #define CONFIG_SYS_MAX_FLASH_SECT       256 /* max sectors per device */
 251
 252 #undef CONFIG_SYS_FLASH_CHECKSUM
 253 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000 /* Flash Erase Timeout (ms) */
 254 #define CONFIG_SYS_FLASH_WRITE_TOUT     500 /* Flash Write Timeout (ms) */
 255
 256 /*
 257  * BCSR on the Local Bus
 258  */
 259 #define CONFIG_SYS_BCSR         0xF8000000
 260                                         /* Access window base at BCSR base */
 261 #define CONFIG_SYS_LBLAWBAR1_PRELIM     CONFIG_SYS_BCSR
 262 #define CONFIG_SYS_LBLAWAR1_PRELIM      (LBLAWAR_EN | LBLAWAR_32KB)
 263
 264 #define CONFIG_SYS_BR1_PRELIM   (CONFIG_SYS_BCSR \
 265                                 | BR_PS_8 \
 266                                 | BR_MS_GPCM \
 267                                 | BR_V)
 268                                 /* 0xF8000801 */
 269 #define CONFIG_SYS_OR1_PRELIM   (OR_AM_32KB \
 270                                 | OR_GPCM_XAM \
 271                                 | OR_GPCM_CSNT \
 272                                 | OR_GPCM_XACS \
 273                                 | OR_GPCM_SCY_15 \
 274                                 | OR_GPCM_TRLX_SET \
 275                                 | OR_GPCM_EHTR_SET \
 276                                 | OR_GPCM_EAD)
 277                                 /* 0xFFFFE9F7 */
 278
 279 /*
 280  * NAND Flash on the Local Bus
 281  */
 282 #define CONFIG_CMD_NAND         1
 283 #define CONFIG_MTD_NAND_VERIFY_WRITE    1
 284 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 285 #define CONFIG_NAND_FSL_ELBC    1
 286
 287 #define CONFIG_SYS_NAND_BASE    0xE0600000
 288 #define CONFIG_SYS_BR3_PRELIM   (CONFIG_SYS_NAND_BASE \
 289                                 | BR_DECC_CHK_GEN       /* Use HW ECC */ \
 290                                 | BR_PS_8               /* 8 bit port */ \
 291                                 | BR_MS_FCM             /* MSEL = FCM */ \
 292                                 | BR_V)                 /* valid */
 293 #define CONFIG_SYS_OR3_PRELIM   (OR_AM_32KB \
 294                                 | OR_FCM_BCTLD \
 295                                 | OR_FCM_CST \
 296                                 | OR_FCM_CHT \
 297                                 | OR_FCM_SCY_1 \
 298                                 | OR_FCM_RST \
 299                                 | OR_FCM_TRLX \
 300                                 | OR_FCM_EHTR)
 301                                 /* 0xFFFF919E */
 302
 303 #define CONFIG_SYS_LBLAWBAR3_PRELIM     CONFIG_SYS_NAND_BASE
 304 #define CONFIG_SYS_LBLAWAR3_PRELIM      (LBLAWAR_EN | LBLAWAR_32KB)
 305
 306 /*
 307  * Serial Port
 308  */
 309 #define CONFIG_CONS_INDEX       1
 310 #define CONFIG_SYS_NS16550
 311 #define CONFIG_SYS_NS16550_SERIAL
 312 #define CONFIG_SYS_NS16550_REG_SIZE     1
 313 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 314
 315 #define CONFIG_SYS_BAUDRATE_TABLE  \
 316                 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 317
 318 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
 319 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
 320
 321 /* Use the HUSH parser */
 322 #define CONFIG_SYS_HUSH_PARSER
 323
 324 /* Pass open firmware flat tree */
 325 #define CONFIG_OF_LIBFDT        1
 326 #define CONFIG_OF_BOARD_SETUP   1
 327 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
 328
 329 /* I2C */
 330 #define CONFIG_SYS_I2C
 331 #define CONFIG_SYS_I2C_FSL
 332 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 333 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 334 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 335 #define CONFIG_SYS_I2C_NOPROBES         { {0, 0x51} }
 336
 337 /*
 338  * Config on-board RTC
 339  */
 340 #define CONFIG_RTC_DS1374       /* use ds1374 rtc via i2c */
 341 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */
 342
 343 /*
 344  * General PCI
 345  * Addresses are mapped 1-1.
 346  */
 347 #define CONFIG_SYS_PCI_MEM_BASE         0x80000000
 348 #define CONFIG_SYS_PCI_MEM_PHYS         CONFIG_SYS_PCI_MEM_BASE
 349 #define CONFIG_SYS_PCI_MEM_SIZE         0x10000000 /* 256M */
 350 #define CONFIG_SYS_PCI_MMIO_BASE        0x90000000
 351 #define CONFIG_SYS_PCI_MMIO_PHYS        CONFIG_SYS_PCI_MMIO_BASE
 352 #define CONFIG_SYS_PCI_MMIO_SIZE        0x10000000 /* 256M */
 353 #define CONFIG_SYS_PCI_IO_BASE          0x00000000
 354 #define CONFIG_SYS_PCI_IO_PHYS          0xE0300000
 355 #define CONFIG_SYS_PCI_IO_SIZE          0x100000 /* 1M */
 356
 357 #define CONFIG_SYS_PCI_SLV_MEM_LOCAL    CONFIG_SYS_SDRAM_BASE
 358 #define CONFIG_SYS_PCI_SLV_MEM_BUS      0x00000000
 359 #define CONFIG_SYS_PCI_SLV_MEM_SIZE     0x80000000
 360
 361 #define CONFIG_SYS_PCIE1_BASE           0xA0000000
 362 #define CONFIG_SYS_PCIE1_CFG_BASE       0xA0000000
 363 #define CONFIG_SYS_PCIE1_CFG_SIZE       0x08000000
 364 #define CONFIG_SYS_PCIE1_MEM_BASE       0xA8000000
 365 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xA8000000
 366 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000
 367 #define CONFIG_SYS_PCIE1_IO_BASE        0x00000000
 368 #define CONFIG_SYS_PCIE1_IO_PHYS        0xB8000000
 369 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00800000
 370
 371 #define CONFIG_SYS_PCIE2_BASE           0xC0000000
 372 #define CONFIG_SYS_PCIE2_CFG_BASE       0xC0000000
 373 #define CONFIG_SYS_PCIE2_CFG_SIZE       0x08000000
 374 #define CONFIG_SYS_PCIE2_MEM_BASE       0xC8000000
 375 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xC8000000
 376 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000
 377 #define CONFIG_SYS_PCIE2_IO_BASE        0x00000000
 378 #define CONFIG_SYS_PCIE2_IO_PHYS        0xD8000000
 379 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00800000
 380
 381 #ifdef CONFIG_PCI
 382 #define CONFIG_PCI_INDIRECT_BRIDGE
 383 #ifndef __ASSEMBLY__
 384 extern int board_pci_host_broken(void);
 385 #endif
 386 #define CONFIG_PCIE
 387 #define CONFIG_PQ_MDS_PIB       1 /* PQ MDS Platform IO Board */
 388
 389 #define CONFIG_HAS_FSL_DR_USB   1 /* fixup device tree for the DR USB */
 390 #define CONFIG_CMD_USB
 391 #define CONFIG_USB_STORAGE
 392 #define CONFIG_USB_EHCI
 393 #define CONFIG_USB_EHCI_FSL
 394 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 395
 396 #define CONFIG_PCI_PNP          /* do pci plug-and-play */
 397
 398 #undef CONFIG_EEPRO100
 399 #undef CONFIG_PCI_SCAN_SHOW     /* show pci devices on startup */
 400 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957   /* Freescale */
 401 #endif /* CONFIG_PCI */
 402
 403 /*
 404  * TSEC
 405  */
 406 #define CONFIG_TSEC_ENET        /* TSEC ethernet support */
 407 #define CONFIG_SYS_TSEC1_OFFSET 0x24000
 408 #define CONFIG_SYS_TSEC1        (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
 409 #define CONFIG_SYS_TSEC2_OFFSET 0x25000
 410 #define CONFIG_SYS_TSEC2        (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET)
 411
 412 /*
 413  * TSEC ethernet configuration
 414  */
 415 #define CONFIG_MII              1 /* MII PHY management */
 416 #define CONFIG_TSEC1            1
 417 #define CONFIG_TSEC1_NAME       "eTSEC0"
 418 #define CONFIG_TSEC2            1
 419 #define CONFIG_TSEC2_NAME       "eTSEC1"
 420 #define TSEC1_PHY_ADDR          2
 421 #define TSEC2_PHY_ADDR          3
 422 #define TSEC1_PHY_ADDR_SGMII    8
 423 #define TSEC2_PHY_ADDR_SGMII    4
 424 #define TSEC1_PHYIDX            0
 425 #define TSEC2_PHYIDX            0
 426 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 427 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 428
 429 /* Options are: TSEC[0-1] */
 430 #define CONFIG_ETHPRIME         "eTSEC1"
 431
 432 /* SERDES */
 433 #define CONFIG_FSL_SERDES
 434 #define CONFIG_FSL_SERDES1      0xe3000
 435 #define CONFIG_FSL_SERDES2      0xe3100
 436
 437 /*
 438  * SATA
 439  */
 440 #define CONFIG_LIBATA
 441 #define CONFIG_FSL_SATA
 442
 443 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 444 #define CONFIG_SATA1
 445 #define CONFIG_SYS_SATA1_OFFSET 0x18000
 446 #define CONFIG_SYS_SATA1        (CONFIG_SYS_IMMR + CONFIG_SYS_SATA1_OFFSET)
 447 #define CONFIG_SYS_SATA1_FLAGS  FLAGS_DMA
 448 #define CONFIG_SATA2
 449 #define CONFIG_SYS_SATA2_OFFSET 0x19000
 450 #define CONFIG_SYS_SATA2        (CONFIG_SYS_IMMR + CONFIG_SYS_SATA2_OFFSET)
 451 #define CONFIG_SYS_SATA2_FLAGS  FLAGS_DMA
 452
 453 #ifdef CONFIG_FSL_SATA
 454 #define CONFIG_LBA48
 455 #define CONFIG_CMD_SATA
 456 #define CONFIG_DOS_PARTITION
 457 #define CONFIG_CMD_EXT2
 458 #endif
 459
 460 /*
 461  * Environment
 462  */
 463 #ifndef CONFIG_SYS_RAMBOOT
 464         #define CONFIG_ENV_IS_IN_FLASH  1
 465         #define CONFIG_ENV_ADDR         \
 466                         (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 467         #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K(one sector) for env */
 468         #define CONFIG_ENV_SIZE         0x2000
 469 #else
 470         #define CONFIG_SYS_NO_FLASH     1       /* Flash is not usable now */
 471         #define CONFIG_ENV_IS_NOWHERE   1       /* Store ENV in memory only */
 472         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 473         #define CONFIG_ENV_SIZE         0x2000
 474 #endif
 475
 476 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 477 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 478
 479 /*
 480  * BOOTP options
 481  */
 482 #define CONFIG_BOOTP_BOOTFILESIZE
 483 #define CONFIG_BOOTP_BOOTPATH
 484 #define CONFIG_BOOTP_GATEWAY
 485 #define CONFIG_BOOTP_HOSTNAME
 486
 487
 488 /*
 489  * Command line configuration.
 490  */
 491 #include <config_cmd_default.h>
 492
 493 #define CONFIG_CMD_PING
 494 #define CONFIG_CMD_I2C
 495 #define CONFIG_CMD_MII
 496 #define CONFIG_CMD_DATE
 497
 498 #if defined(CONFIG_PCI)
 499     #define CONFIG_CMD_PCI
 500 #endif
 501
 502 #if defined(CONFIG_SYS_RAMBOOT)
 503     #undef CONFIG_CMD_SAVEENV
 504     #undef CONFIG_CMD_LOADS
 505 #endif
 506
 507 #define CONFIG_CMDLINE_EDITING  1       /* add command line history */
 508 #define CONFIG_AUTO_COMPLETE            /* add autocompletion support   */
 509
 510 #undef CONFIG_WATCHDOG          /* watchdog disabled */
 511
 512 #define CONFIG_MMC     1
 513
 514 #ifdef CONFIG_MMC
 515 #define CONFIG_FSL_ESDHC
 516 #define CONFIG_FSL_ESDHC_PIN_MUX
 517 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC83xx_ESDHC_ADDR
 518 #define CONFIG_CMD_MMC
 519 #define CONFIG_GENERIC_MMC
 520 #define CONFIG_CMD_EXT2
 521 #define CONFIG_CMD_FAT
 522 #define CONFIG_DOS_PARTITION
 523 #endif
 524
 525 /*
 526  * Miscellaneous configurable options
 527  */
 528 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 529 #define CONFIG_SYS_LOAD_ADDR            0x2000000 /* default load address */
 530
 531 #if defined(CONFIG_CMD_KGDB)
 532         #define CONFIG_SYS_CBSIZE       1024 /* Console I/O Buffer Size */
 533 #else
 534         #define CONFIG_SYS_CBSIZE       256 /* Console I/O Buffer Size */
 535 #endif
 536
 537                                 /* Print Buffer Size */
 538 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 539 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 540                                 /* Boot Argument Buffer Size */
 541 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 542
 543 /*
 544  * For booting Linux, the board info and command line data
 545  * have to be in the first 256 MB of memory, since this is
 546  * the maximum mapped by the Linux kernel during initialization.
 547  */
 548 #define CONFIG_SYS_BOOTMAPSZ    (256 << 20) /* Initial Memory map for Linux */
 549
 550 /*
 551  * Core HID Setup
 552  */
 553 #define CONFIG_SYS_HID0_INIT    0x000000000
 554 #define CONFIG_SYS_HID0_FINAL   (HID0_ENABLE_MACHINE_CHECK | \
 555                                  HID0_ENABLE_INSTRUCTION_CACHE)
 556 #define CONFIG_SYS_HID2         HID2_HBE
 557
 558 /*
 559  * MMU Setup
 560  */
 561 #define CONFIG_HIGH_BATS        1       /* High BATs supported */
 562
 563 /* DDR: cache cacheable */
 564 #define CONFIG_SYS_SDRAM_LOWER          CONFIG_SYS_SDRAM_BASE
 565 #define CONFIG_SYS_SDRAM_UPPER          (CONFIG_SYS_SDRAM_BASE + 0x10000000)
 566
 567 #define CONFIG_SYS_IBAT0L       (CONFIG_SYS_SDRAM_LOWER \
 568                                 | BATL_PP_RW \
 569                                 | BATL_MEMCOHERENCE)
 570 #define CONFIG_SYS_IBAT0U       (CONFIG_SYS_SDRAM_LOWER \
 571                                 | BATU_BL_256M \
 572                                 | BATU_VS \
 573                                 | BATU_VP)
 574 #define CONFIG_SYS_DBAT0L       CONFIG_SYS_IBAT0L
 575 #define CONFIG_SYS_DBAT0U       CONFIG_SYS_IBAT0U
 576
 577 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_SDRAM_UPPER \
 578                                 | BATL_PP_RW \
 579                                 | BATL_MEMCOHERENCE)
 580 #define CONFIG_SYS_IBAT1U       (CONFIG_SYS_SDRAM_UPPER \
 581                                 | BATU_BL_256M \
 582                                 | BATU_VS \
 583                                 | BATU_VP)
 584 #define CONFIG_SYS_DBAT1L       CONFIG_SYS_IBAT1L
 585 #define CONFIG_SYS_DBAT1U       CONFIG_SYS_IBAT1U
 586
 587 /* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */
 588 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_IMMR \
 589                                 | BATL_PP_RW \
 590                                 | BATL_CACHEINHIBIT \
 591                                 | BATL_GUARDEDSTORAGE)
 592 #define CONFIG_SYS_IBAT2U       (CONFIG_SYS_IMMR \
 593                                 | BATU_BL_8M \
 594                                 | BATU_VS \
 595                                 | BATU_VP)
 596 #define CONFIG_SYS_DBAT2L       CONFIG_SYS_IBAT2L
 597 #define CONFIG_SYS_DBAT2U       CONFIG_SYS_IBAT2U
 598
 599 /* BCSR: cache-inhibit and guarded */
 600 #define CONFIG_SYS_IBAT3L       (CONFIG_SYS_BCSR \
 601                                 | BATL_PP_RW \
 602                                 | BATL_CACHEINHIBIT \
 603                                 | BATL_GUARDEDSTORAGE)
 604 #define CONFIG_SYS_IBAT3U       (CONFIG_SYS_BCSR \
 605                                 | BATU_BL_128K \
 606                                 | BATU_VS \
 607                                 | BATU_VP)
 608 #define CONFIG_SYS_DBAT3L       CONFIG_SYS_IBAT3L
 609 #define CONFIG_SYS_DBAT3U       CONFIG_SYS_IBAT3U
 610
 611 /* FLASH: icache cacheable, but dcache-inhibit and guarded */
 612 #define CONFIG_SYS_IBAT4L       (CONFIG_SYS_FLASH_BASE \
 613                                 | BATL_PP_RW \
 614                                 | BATL_MEMCOHERENCE)
 615 #define CONFIG_SYS_IBAT4U       (CONFIG_SYS_FLASH_BASE \
 616                                 | BATU_BL_32M \
 617                                 | BATU_VS \
 618                                 | BATU_VP)
 619 #define CONFIG_SYS_DBAT4L       (CONFIG_SYS_FLASH_BASE \
 620                                 | BATL_PP_RW \
 621                                 | BATL_CACHEINHIBIT \
 622                                 | BATL_GUARDEDSTORAGE)
 623 #define CONFIG_SYS_DBAT4U       CONFIG_SYS_IBAT4U
 624
 625 /* Stack in dcache: cacheable, no memory coherence */
 626 #define CONFIG_SYS_IBAT5L       (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW)
 627 #define CONFIG_SYS_IBAT5U       (CONFIG_SYS_INIT_RAM_ADDR \
 628                                 | BATU_BL_128K \
 629                                 | BATU_VS \
 630                                 | BATU_VP)
 631 #define CONFIG_SYS_DBAT5L       CONFIG_SYS_IBAT5L
 632 #define CONFIG_SYS_DBAT5U       CONFIG_SYS_IBAT5U
 633
 634 #ifdef CONFIG_PCI
 635 /* PCI MEM space: cacheable */
 636 #define CONFIG_SYS_IBAT6L       (CONFIG_SYS_PCI_MEM_PHYS \
 637                                 | BATL_PP_RW \
 638                                 | BATL_MEMCOHERENCE)
 639 #define CONFIG_SYS_IBAT6U       (CONFIG_SYS_PCI_MEM_PHYS \
 640                                 | BATU_BL_256M \
 641                                 | BATU_VS \
 642                                 | BATU_VP)
 643 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
 644 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
 645 /* PCI MMIO space: cache-inhibit and guarded */
 646 #define CONFIG_SYS_IBAT7L       (CONFIG_SYS_PCI_MMIO_PHYS \
 647                                 | BATL_PP_RW \
 648                                 | BATL_CACHEINHIBIT \
 649                                 | BATL_GUARDEDSTORAGE)
 650 #define CONFIG_SYS_IBAT7U       (CONFIG_SYS_PCI_MMIO_PHYS \
 651                                 | BATU_BL_256M \
 652                                 | BATU_VS \
 653                                 | BATU_VP)
 654 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
 655 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
 656 #else
 657 #define CONFIG_SYS_IBAT6L       (0)
 658 #define CONFIG_SYS_IBAT6U       (0)
 659 #define CONFIG_SYS_IBAT7L       (0)
 660 #define CONFIG_SYS_IBAT7U       (0)
 661 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
 662 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
 663 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
 664 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
 665 #endif
 666
 667 #if defined(CONFIG_CMD_KGDB)
 668 #define CONFIG_KGDB_BAUDRATE    230400  /* speed of kgdb serial port */
 669 #endif
 670
 671 /*
 672  * Environment Configuration
 673  */
 674
 675 #define CONFIG_ENV_OVERWRITE
 676
 677 #if defined(CONFIG_TSEC_ENET)
 678 #define CONFIG_HAS_ETH0
 679 #define CONFIG_HAS_ETH1
 680 #endif
 681
 682 #define CONFIG_BAUDRATE 115200
 683
 684 #define CONFIG_LOADADDR 800000  /* default location for tftp and bootm */
 685
 686 #define CONFIG_BOOTDELAY 6      /* -1 disables auto-boot */
 687 #undef CONFIG_BOOTARGS          /* the boot command will set bootargs */
 688
 689 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 690         "netdev=eth0\0"                                                 \
 691         "consoledev=ttyS0\0"                                            \
 692         "ramdiskaddr=1000000\0"                                         \
 693         "ramdiskfile=ramfs.83xx\0"                                      \
 694         "fdtaddr=780000\0"                                              \
 695         "fdtfile=mpc8379_mds.dtb\0"                                     \
 696         ""
 697
 698 #define CONFIG_NFSBOOTCOMMAND                                           \
 699         "setenv bootargs root=/dev/nfs rw "                             \
 700                 "nfsroot=$serverip:$rootpath "                          \
 701                 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:"   \
 702                                                         "$netdev:off "  \
 703                 "console=$consoledev,$baudrate $othbootargs;"           \
 704         "tftp $loadaddr $bootfile;"                                     \
 705         "tftp $fdtaddr $fdtfile;"                                       \
 706         "bootm $loadaddr - $fdtaddr"
 707
 708 #define CONFIG_RAMBOOTCOMMAND                                           \
 709         "setenv bootargs root=/dev/ram rw "                             \
 710                 "console=$consoledev,$baudrate $othbootargs;"           \
 711         "tftp $ramdiskaddr $ramdiskfile;"                               \
 712         "tftp $loadaddr $bootfile;"                                     \
 713         "tftp $fdtaddr $fdtfile;"                                       \
 714         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 715
 716
 717 #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
 718
 719 #endif  /* __CONFIG_H */