include/configs/MVBLM7.h

   1 /*
   2  * Copyright (C) Matrix Vision GmbH 2008
   3  *
   4  * Matrix Vision mvBlueLYNX-M7 configuration file
   5  * based on Freescale's MPC8349ITX.
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #include <version.h>
  15
  16 /*
  17  * High Level Configuration Options
  18  */
  19 #define CONFIG_E300     1
  20 #define CONFIG_MPC834x  1
  21 #define CONFIG_MPC8343  1
  22
  23 #define CONFIG_SYS_TEXT_BASE    0xFFF00000
  24
  25 #define CONFIG_SYS_IMMR         0xE0000000
  26
  27 #define CONFIG_PCI
  28 #define CONFIG_PCI_INDIRECT_BRIDGE
  29 #define CONFIG_PCI_SKIP_HOST_BRIDGE
  30 #define CONFIG_TSEC_ENET
  31 #define CONFIG_MPC8XXX_SPI
  32 #define CONFIG_HARD_SPI
  33 #define MVBLM7_MMC_CS   0x04000000
  34 #define CONFIG_MISC_INIT_R
  35
  36 /* I2C */
  37 #define CONFIG_SYS_I2C
  38 #define CONFIG_SYS_I2C_FSL
  39 #define CONFIG_SYS_FSL_I2C_SPEED        100000
  40 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
  41 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
  42 #define CONFIG_SYS_FSL_I2C2_SPEED       100000
  43 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
  44 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
  45
  46 /*
  47  * DDR Setup
  48  */
  49 #undef  CONFIG_SPD_EEPROM
  50
  51 #define CONFIG_SYS_DDR_BASE             0x00000000
  52 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_BASE
  53 #define CONFIG_SYS_DDR_SDRAM_BASE       CONFIG_SYS_DDR_BASE
  54 #define CONFIG_SYS_83XX_DDR_USES_CS0    1
  55 #define CONFIG_SYS_MEMTEST_START        (60<<20)
  56 #define CONFIG_SYS_MEMTEST_END          (70<<20)
  57 #define CONFIG_VERY_BIG_RAM
  58
  59 #define CONFIG_SYS_DDRCDR               (DDRCDR_PZ_HIZ \
  60                                         | DDRCDR_NZ_HIZ \
  61                                         | DDRCDR_Q_DRN)
  62                                         /* 0x22000001 */
  63 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL   DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
  64
  65 #define CONFIG_SYS_DDR_SIZE             512
  66
  67 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80014202
  68
  69 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000003f
  70
  71 #define CONFIG_SYS_DDR_TIMING_0         0x00260802
  72 #define CONFIG_SYS_DDR_TIMING_1         0x3837c322
  73 #define CONFIG_SYS_DDR_TIMING_2         0x0f9848c6
  74 #define CONFIG_SYS_DDR_TIMING_3         0x00000000
  75
  76 #define CONFIG_SYS_DDR_SDRAM_CFG        0x43080008
  77 #define CONFIG_SYS_DDR_SDRAM_CFG2       0x00401000
  78 #define CONFIG_SYS_DDR_INTERVAL         0x02000100
  79
  80 #define CONFIG_SYS_DDR_MODE             0x04040242
  81 #define CONFIG_SYS_DDR_MODE2            0x00800000
  82
  83 /* Flash */
  84 #define CONFIG_SYS_FLASH_CFI
  85 #define CONFIG_FLASH_CFI_DRIVER
  86 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
  87
  88 #define CONFIG_SYS_FLASH_BASE           0xFF800000
  89 #define CONFIG_SYS_FLASH_SIZE           8
  90 #define CONFIG_SYS_FLASH_EMPTY_INFO
  91 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000
  92 #define CONFIG_SYS_FLASH_WRITE_TOUT     500
  93 #define CONFIG_SYS_MAX_FLASH_BANKS      1
  94 #define CONFIG_SYS_MAX_FLASH_SECT       256
  95
  96 #define CONFIG_SYS_BR0_PRELIM   (CONFIG_SYS_FLASH_BASE \
  97                                 | BR_PS_16 \
  98                                 | BR_MS_GPCM \
  99                                 | BR_V)
 100 #define CONFIG_SYS_OR0_PRELIM   (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \
 101                                 | OR_UPM_XAM \
 102                                 | OR_GPCM_CSNT \
 103                                 | OR_GPCM_ACS_DIV2 \
 104                                 | OR_GPCM_XACS \
 105                                 | OR_GPCM_SCY_15 \
 106                                 | OR_GPCM_TRLX_SET \
 107                                 | OR_GPCM_EHTR_SET \
 108                                 | OR_GPCM_EAD)
 109 #define CONFIG_SYS_LBLAWBAR0_PRELIM     CONFIG_SYS_FLASH_BASE
 110 #define CONFIG_SYS_LBLAWAR0_PRELIM      (LBLAWAR_EN | LBLAWAR_8MB)
 111
 112 /*
 113  * U-Boot memory configuration
 114  */
 115 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 116 #undef  CONFIG_SYS_RAMBOOT
 117
 118 #define CONFIG_SYS_INIT_RAM_LOCK
 119 #define CONFIG_SYS_INIT_RAM_ADDR        0xFD000000 /* Initial RAM address */
 120 #define CONFIG_SYS_INIT_RAM_SIZE        0x1000 /* Size of used area in RAM*/
 121
 122 #define CONFIG_SYS_GBL_DATA_OFFSET      \
 123                         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 124 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 125
 126 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
 127 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 128 #define CONFIG_SYS_MALLOC_LEN           (512 * 1024)
 129
 130 /*
 131  * Local Bus LCRR and LBCR regs
 132  *  LCRR:  DLL bypass, Clock divider is 4
 133  * External Local Bus rate is
 134  *  CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
 135  */
 136 #define CONFIG_SYS_LCRR_DBYP    LCRR_DBYP
 137 #define CONFIG_SYS_LCRR_CLKDIV  LCRR_CLKDIV_4
 138 #define CONFIG_SYS_LBC_LBCR     0x00000000
 139
 140 /* LB sdram refresh timer, about 6us */
 141 #define CONFIG_SYS_LBC_LSRT     0x32000000
 142 /* LB refresh timer prescal, 266MHz/32*/
 143 #define CONFIG_SYS_LBC_MRTPR    0x20000000
 144
 145 /*
 146  * Serial Port
 147  */
 148 #define CONFIG_CONS_INDEX       1
 149 #define CONFIG_SYS_NS16550
 150 #define CONFIG_SYS_NS16550_SERIAL
 151 #define CONFIG_SYS_NS16550_REG_SIZE     1
 152 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 153
 154 #define CONFIG_SYS_BAUDRATE_TABLE  \
 155                 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 156
 157 #define CONFIG_CONSOLE          ttyS0
 158 #define CONFIG_BAUDRATE         115200
 159
 160 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500)
 161 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600)
 162
 163 /* pass open firmware flat tree */
 164 #define CONFIG_OF_LIBFDT                1
 165 #define CONFIG_OF_BOARD_SETUP           1
 166 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
 167 #define MV_DTB_NAME     "mvblm7.dtb"
 168
 169 /*
 170  * PCI
 171  */
 172 #define CONFIG_SYS_PCI1_MEM_BASE        0x80000000
 173 #define CONFIG_SYS_PCI1_MEM_PHYS        CONFIG_SYS_PCI1_MEM_BASE
 174 #define CONFIG_SYS_PCI1_MEM_SIZE        0x10000000
 175 #define CONFIG_SYS_PCI1_MMIO_BASE       \
 176                         (CONFIG_SYS_PCI1_MEM_BASE + CONFIG_SYS_PCI1_MEM_SIZE)
 177 #define CONFIG_SYS_PCI1_MMIO_PHYS       CONFIG_SYS_PCI1_MMIO_BASE
 178 #define CONFIG_SYS_PCI1_MMIO_SIZE       0x10000000
 179 #define CONFIG_SYS_PCI1_IO_BASE 0x00000000
 180 #define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000
 181 #define CONFIG_SYS_PCI1_IO_SIZE 0x01000000
 182
 183 #define CONFIG_NET_RETRY_COUNT  3
 184
 185 #define CONFIG_PCI_66M
 186 #define CONFIG_83XX_CLKIN       66666667
 187 #define CONFIG_PCI_PNP
 188 #define CONFIG_PCI_SCAN_SHOW
 189
 190 /* TSEC */
 191 #define CONFIG_GMII
 192 #define CONFIG_SYS_VSC8601_SKEWFIX
 193 #define CONFIG_SYS_VSC8601_SKEW_TX      3
 194 #define CONFIG_SYS_VSC8601_SKEW_RX      3
 195
 196 #define CONFIG_TSEC1
 197 #define CONFIG_TSEC2
 198
 199 #define CONFIG_HAS_ETH0
 200 #define CONFIG_TSEC1_NAME       "TSEC0"
 201 #define CONFIG_FEC1_PHY_NORXERR
 202 #define CONFIG_SYS_TSEC1_OFFSET 0x24000
 203 #define CONFIG_SYS_TSEC1        (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
 204 #define TSEC1_PHY_ADDR          0x10
 205 #define TSEC1_PHYIDX            0
 206 #define TSEC1_FLAGS             (TSEC_GIGABIT|TSEC_REDUCED)
 207
 208 #define CONFIG_HAS_ETH1
 209 #define CONFIG_TSEC2_NAME       "TSEC1"
 210 #define CONFIG_FEC2_PHY_NORXERR
 211 #define CONFIG_SYS_TSEC2_OFFSET 0x25000
 212 #define CONFIG_SYS_TSEC2        (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET)
 213 #define TSEC2_PHY_ADDR          0x11
 214 #define TSEC2_PHYIDX            0
 215 #define TSEC2_FLAGS             (TSEC_GIGABIT|TSEC_REDUCED)
 216
 217 #define CONFIG_ETHPRIME         "TSEC0"
 218
 219 #define CONFIG_BOOTP_VENDOREX
 220 #define CONFIG_BOOTP_SUBNETMASK
 221 #define CONFIG_BOOTP_GATEWAY
 222 #define CONFIG_BOOTP_DNS
 223 #define CONFIG_BOOTP_DNS2
 224 #define CONFIG_BOOTP_HOSTNAME
 225 #define CONFIG_BOOTP_BOOTFILESIZE
 226 #define CONFIG_BOOTP_BOOTPATH
 227 #define CONFIG_BOOTP_NTPSERVER
 228 #define CONFIG_BOOTP_RANDOM_DELAY
 229 #define CONFIG_BOOTP_SEND_HOSTNAME
 230 #define CONFIG_LIB_RAND
 231
 232 /* USB */
 233 #define CONFIG_SYS_USB_HOST
 234 #define CONFIG_USB_EHCI
 235 #define CONFIG_USB_EHCI_FSL
 236 #define CONFIG_HAS_FSL_DR_USB
 237 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 238
 239 /*
 240  * Environment
 241  */
 242 #undef  CONFIG_SYS_FLASH_PROTECTION
 243 #define CONFIG_ENV_OVERWRITE
 244
 245 #define CONFIG_ENV_IS_IN_FLASH  1
 246 #define CONFIG_ENV_ADDR         0xFF800000
 247 #define CONFIG_ENV_SIZE         0x2000
 248 #define CONFIG_ENV_SECT_SIZE    0x2000
 249 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR+CONFIG_ENV_SIZE)
 250 #define CONFIG_ENV_SIZE_REDUND  CONFIG_ENV_SIZE
 251
 252 #define CONFIG_LOADS_ECHO
 253 #define CONFIG_SYS_LOADS_BAUD_CHANGE
 254
 255 /*
 256  * Command line configuration.
 257  */
 258 #include <config_cmd_default.h>
 259
 260 #define CONFIG_CMD_CACHE
 261 #define CONFIG_CMD_IRQ
 262 #define CONFIG_CMD_NET
 263 #define CONFIG_CMD_MII
 264 #define CONFIG_CMD_PING
 265 #define CONFIG_CMD_DHCP
 266 #define CONFIG_CMD_SDRAM
 267 #define CONFIG_CMD_PCI
 268 #define CONFIG_CMD_I2C
 269 #define CONFIG_CMD_FPGA
 270 #define CONFIG_CMD_FPGA_LOADMK
 271 #define CONFIG_CMD_USB
 272 #define CONFIG_DOS_PARTITION
 273
 274 #undef CONFIG_WATCHDOG
 275
 276 /*
 277  * Miscellaneous configurable options
 278  */
 279 #define CONFIG_SYS_LONGHELP
 280 #define CONFIG_CMDLINE_EDITING
 281 #define CONFIG_AUTO_COMPLETE    /* add autocompletion support   */
 282 #define CONFIG_SYS_HUSH_PARSER
 283
 284 /* default load address */
 285 #define CONFIG_SYS_LOAD_ADDR    0x2000000
 286 /* default location for tftp and bootm */
 287 #define CONFIG_LOADADDR 0x200000
 288
 289 #define CONFIG_SYS_PROMPT       "mvBL-M7> "
 290 #define CONFIG_SYS_CBSIZE       256
 291
 292 #define CONFIG_SYS_PBSIZE       \
 293                         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 294 #define CONFIG_SYS_MAXARGS      16
 295 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 296
 297 /*
 298  * For booting Linux, the board info and command line data
 299  * have to be in the first 256 MB of memory, since this is
 300  * the maximum mapped by the Linux kernel during initialization.
 301  */
 302                                 /* Initial Memory map for Linux*/
 303 #define CONFIG_SYS_BOOTMAPSZ    (256 << 20)
 304
 305 #define CONFIG_SYS_HRCW_LOW     0x0
 306 #define CONFIG_SYS_HRCW_HIGH    0x0
 307
 308 /*
 309  * System performance
 310  */
 311 #define CONFIG_SYS_ACR_PIPE_DEP 3       /* Arbiter pipeline depth (0-3) */
 312 #define CONFIG_SYS_ACR_RPTCNT   3       /* Arbiter repeat count (0-7) */
 313 #define CONFIG_SYS_SPCR_TSEC1EP 3       /* TSEC1 emergency priority (0-3) */
 314 #define CONFIG_SYS_SPCR_TSEC2EP 3       /* TSEC2 emergency priority (0-3) */
 315
 316 /* clocking */
 317 #define CONFIG_SYS_SCCR_ENCCM           0
 318 #define CONFIG_SYS_SCCR_USBMPHCM        0
 319 #define CONFIG_SYS_SCCR_USBDRCM 2
 320 #define CONFIG_SYS_SCCR_TSEC1CM 1
 321 #define CONFIG_SYS_SCCR_TSEC2CM 1
 322
 323 #define CONFIG_SYS_SICRH        0x1fef0003
 324 #define CONFIG_SYS_SICRL        (SICRL_LDP_A | SICRL_USB1 | SICRL_USB0)
 325
 326 #define CONFIG_SYS_HID0_INIT    0x000000000
 327 #define CONFIG_SYS_HID0_FINAL   (CONFIG_SYS_HID0_INIT | \
 328                                  HID0_ENABLE_INSTRUCTION_CACHE)
 329
 330 #define CONFIG_SYS_HID2 HID2_HBE
 331 #define CONFIG_HIGH_BATS        1
 332
 333 /* DDR  */
 334 #define CONFIG_SYS_IBAT0L       (CONFIG_SYS_SDRAM_BASE \
 335                                 | BATL_PP_RW \
 336                                 | BATL_MEMCOHERENCE)
 337 #define CONFIG_SYS_IBAT0U       (CONFIG_SYS_SDRAM_BASE \
 338                                 | BATU_BL_256M \
 339                                 | BATU_VS \
 340                                 | BATU_VP)
 341
 342 /* PCI  */
 343 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_PCI1_MEM_BASE \
 344                                 | BATL_PP_RW \
 345                                 | BATL_MEMCOHERENCE)
 346 #define CONFIG_SYS_IBAT1U       (CONFIG_SYS_PCI1_MEM_BASE \
 347                                 | BATU_BL_256M \
 348                                 | BATU_VS \
 349                                 | BATU_VP)
 350 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_PCI1_MMIO_BASE \
 351                                 | BATL_PP_RW \
 352                                 | BATL_CACHEINHIBIT \
 353                                 | BATL_GUARDEDSTORAGE)
 354 #define CONFIG_SYS_IBAT2U       (CONFIG_SYS_PCI1_MMIO_BASE \
 355                                 | BATU_BL_256M \
 356                                 | BATU_VS \
 357                                 | BATU_VP)
 358
 359 /* no PCI2 */
 360 #define CONFIG_SYS_IBAT3L       0
 361 #define CONFIG_SYS_IBAT3U       0
 362 #define CONFIG_SYS_IBAT4L       0
 363 #define CONFIG_SYS_IBAT4U       0
 364
 365 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
 366 #define CONFIG_SYS_IBAT5L       (CONFIG_SYS_IMMR \
 367                                 | BATL_PP_RW \
 368                                 | BATL_CACHEINHIBIT \
 369                                 | BATL_GUARDEDSTORAGE)
 370 #define CONFIG_SYS_IBAT5U       (CONFIG_SYS_IMMR \
 371                                 | BATU_BL_256M \
 372                                 | BATU_VS \
 373                                 | BATU_VP)
 374
 375 /* stack in DCACHE 0xFDF00000 & FLASH @ 0xFF800000 */
 376 #define CONFIG_SYS_IBAT6L       (0xF0000000 \
 377                                 | BATL_PP_RW \
 378                                 | BATL_MEMCOHERENCE \
 379                                 | BATL_GUARDEDSTORAGE)
 380 #define CONFIG_SYS_IBAT6U       (0xF0000000 \
 381                                 | BATU_BL_256M \
 382                                 | BATU_VS \
 383                                 | BATU_VP)
 384 #define CONFIG_SYS_IBAT7L       0
 385 #define CONFIG_SYS_IBAT7U       0
 386
 387 #define CONFIG_SYS_DBAT0L       CONFIG_SYS_IBAT0L
 388 #define CONFIG_SYS_DBAT0U       CONFIG_SYS_IBAT0U
 389 #define CONFIG_SYS_DBAT1L       CONFIG_SYS_IBAT1L
 390 #define CONFIG_SYS_DBAT1U       CONFIG_SYS_IBAT1U
 391 #define CONFIG_SYS_DBAT2L       CONFIG_SYS_IBAT2L
 392 #define CONFIG_SYS_DBAT2U       CONFIG_SYS_IBAT2U
 393 #define CONFIG_SYS_DBAT3L       CONFIG_SYS_IBAT3L
 394 #define CONFIG_SYS_DBAT3U       CONFIG_SYS_IBAT3U
 395 #define CONFIG_SYS_DBAT4L       CONFIG_SYS_IBAT4L
 396 #define CONFIG_SYS_DBAT4U       CONFIG_SYS_IBAT4U
 397 #define CONFIG_SYS_DBAT5L       CONFIG_SYS_IBAT5L
 398 #define CONFIG_SYS_DBAT5U       CONFIG_SYS_IBAT5U
 399 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
 400 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
 401 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
 402 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
 403
 404 /*
 405  * Environment Configuration
 406  */
 407 #define CONFIG_ENV_OVERWRITE
 408
 409 #define CONFIG_NETDEV           eth0
 410
 411 /* Default path and filenames */
 412 #define CONFIG_BOOTDELAY                5
 413 #define CONFIG_AUTOBOOT_KEYED
 414 #define CONFIG_AUTOBOOT_STOP_STR        "s"
 415 #define CONFIG_ZERO_BOOTDELAY_CHECK
 416 #define CONFIG_RESET_TO_RETRY           1000
 417
 418 #define MV_CI                   "mvBL-M7"
 419 #define MV_VCI                  "mvBL-M7"
 420 #define MV_FPGA_DATA            0xfff40000
 421 #define MV_FPGA_SIZE            0
 422 #define MV_KERNEL_ADDR          0xff810000
 423 #define MV_INITRD_ADDR          0xffb00000
 424 #define MV_SCRIPT_ADDR          0xff804000
 425 #define MV_SCRIPT_ADDR2         0xff806000
 426 #define MV_DTB_ADDR             0xff808000
 427 #define MV_INITRD_LENGTH        0x00400000
 428
 429 #define CONFIG_SHOW_BOOT_PROGRESS 1
 430
 431 #define MV_KERNEL_ADDR_RAM      0x00100000
 432 #define MV_DTB_ADDR_RAM         0x00600000
 433 #define MV_INITRD_ADDR_RAM      0x01000000
 434
 435 #define CONFIG_BOOTCOMMAND      "if imi ${script_addr}; "               \
 436                                         "then source ${script_addr}; "  \
 437                                         "else source ${script_addr2}; " \
 438                                 "fi;"
 439 #define CONFIG_BOOTARGS         "root=/dev/ram ro rootfstype=squashfs"
 440
 441 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 442         "console_nr=0\0"                                        \
 443         "baudrate=" __stringify(CONFIG_BAUDRATE) "\0"           \
 444         "stdin=serial\0"                                        \
 445         "stdout=serial\0"                                       \
 446         "stderr=serial\0"                                       \
 447         "fpga=0\0"                                              \
 448         "fpgadata=" __stringify(MV_FPGA_DATA) "\0"                      \
 449         "fpgadatasize=" __stringify(MV_FPGA_SIZE) "\0"          \
 450         "script_addr=" __stringify(MV_SCRIPT_ADDR) "\0"         \
 451         "script_addr2=" __stringify(MV_SCRIPT_ADDR2) "\0"               \
 452         "mv_kernel_addr=" __stringify(MV_KERNEL_ADDR) "\0"              \
 453         "mv_kernel_addr_ram=" __stringify(MV_KERNEL_ADDR_RAM) "\0"      \
 454         "mv_initrd_addr=" __stringify(MV_INITRD_ADDR) "\0"              \
 455         "mv_initrd_addr_ram=" __stringify(MV_INITRD_ADDR_RAM) "\0"      \
 456         "mv_initrd_length=" __stringify(MV_INITRD_LENGTH) "\0"  \
 457         "mv_dtb_addr=" __stringify(MV_DTB_ADDR) "\0"                    \
 458         "mv_dtb_addr_ram=" __stringify(MV_DTB_ADDR_RAM) "\0"            \
 459         "dtb_name=" __stringify(MV_DTB_NAME) "\0"                       \
 460         "mv_version=" U_BOOT_VERSION "\0"                       \
 461         "dhcp_client_id=" MV_CI "\0"                            \
 462         "dhcp_vendor-class-identifier=" MV_VCI "\0"             \
 463         "netretry=no\0"                                         \
 464         "use_static_ipaddr=no\0"                                \
 465         "static_ipaddr=192.168.90.10\0"                         \
 466         "static_netmask=255.255.255.0\0"                        \
 467         "static_gateway=0.0.0.0\0"                              \
 468         "initrd_name=uInitrd.mvBL-M7-rfs\0"                     \
 469         "zcip=no\0"                                             \
 470         "netboot=yes\0"                                         \
 471         "mvtest=Ff\0"                                           \
 472         "tried_bootfromflash=no\0"                              \
 473         "tried_bootfromnet=no\0"                                \
 474         "bootfile=mvblm72625.boot\0"                            \
 475         "use_dhcp=yes\0"                                        \
 476         "gev_start=yes\0"                                       \
 477         "mvbcdma_debug=0\0"                                     \
 478         "mvbcia_debug=0\0"                                      \
 479         "propdev_debug=0\0"                                     \
 480         "gevss_debug=0\0"                                       \
 481         "watchdog=0\0"                                          \
 482         "usb_dr_mode=host\0"                                    \
 483         "sensor_cnt=2\0"                                        \
 484         ""
 485
 486 #define CONFIG_FPGA_COUNT       1
 487 #define CONFIG_FPGA
 488 #define CONFIG_FPGA_ALTERA
 489 #define CONFIG_FPGA_CYCLON2
 490
 491 #endif