include/configs/P1010RDB.h

   1 /*
   2  * Copyright 2010-2011 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * P010 RDB board configuration file
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #ifdef CONFIG_36BIT
  15 #define CONFIG_PHYS_64BIT
  16 #endif
  17
  18 #define CONFIG_P1010
  19 #define CONFIG_E500                     /* BOOKE e500 family */
  20 #include <asm/config_mpc85xx.h>
  21 #define CONFIG_NAND_FSL_IFC
  22
  23 #ifdef CONFIG_SDCARD
  24 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  25 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
  26 #define CONFIG_SPL_ENV_SUPPORT
  27 #define CONFIG_SPL_SERIAL_SUPPORT
  28 #define CONFIG_SPL_MMC_SUPPORT
  29 #define CONFIG_SPL_MMC_MINIMAL
  30 #define CONFIG_SPL_FLUSH_IMAGE
  31 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  32 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  33 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  34 #define CONFIG_SPL_I2C_SUPPORT
  35 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
  36 #define CONFIG_SYS_TEXT_BASE            0x11001000
  37 #define CONFIG_SPL_TEXT_BASE            0xD0001000
  38 #define CONFIG_SPL_PAD_TO               0x18000
  39 #define CONFIG_SPL_MAX_SIZE             (96 * 1024)
  40 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (512 << 10)
  41 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x11000000)
  42 #define CONFIG_SYS_MMC_U_BOOT_START     (0x11000000)
  43 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (96 << 10)
  44 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  45 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  46 #define CONFIG_SPL_MMC_BOOT
  47 #ifdef CONFIG_SPL_BUILD
  48 #define CONFIG_SPL_COMMON_INIT_DDR
  49 #endif
  50 #endif
  51
  52 #ifdef CONFIG_SPIFLASH
  53 #ifdef CONFIG_SECURE_BOOT
  54 #define CONFIG_RAMBOOT_SPIFLASH
  55 #define CONFIG_SYS_TEXT_BASE            0x11000000
  56 #define CONFIG_RESET_VECTOR_ADDRESS     0x1107fffc
  57 #else
  58 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  59 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
  60 #define CONFIG_SPL_ENV_SUPPORT
  61 #define CONFIG_SPL_SERIAL_SUPPORT
  62 #define CONFIG_SPL_SPI_SUPPORT
  63 #define CONFIG_SPL_SPI_FLASH_SUPPORT
  64 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  65 #define CONFIG_SPL_FLUSH_IMAGE
  66 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  67 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  68 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  69 #define CONFIG_SPL_I2C_SUPPORT
  70 #define CONFIG_FSL_LAW         /* Use common FSL init code */
  71 #define CONFIG_SYS_TEXT_BASE                    0x11001000
  72 #define CONFIG_SPL_TEXT_BASE                    0xD0001000
  73 #define CONFIG_SPL_PAD_TO                       0x18000
  74 #define CONFIG_SPL_MAX_SIZE                     (96 * 1024)
  75 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (512 << 10)
  76 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x11000000)
  77 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x11000000)
  78 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (96 << 10)
  79 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  80 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  81 #define CONFIG_SPL_SPI_BOOT
  82 #ifdef CONFIG_SPL_BUILD
  83 #define CONFIG_SPL_COMMON_INIT_DDR
  84 #endif
  85 #endif
  86 #endif
  87
  88 #ifdef CONFIG_NAND
  89 #ifdef CONFIG_SECURE_BOOT
  90 #define CONFIG_SPL_INIT_MINIMAL
  91 #define CONFIG_SPL_SERIAL_SUPPORT
  92 #define CONFIG_SPL_NAND_SUPPORT
  93 #define CONFIG_SPL_NAND_BOOT
  94 #define CONFIG_SPL_FLUSH_IMAGE
  95 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  96
  97 #define CONFIG_SYS_TEXT_BASE            0x00201000
  98 #define CONFIG_SPL_TEXT_BASE            0xFFFFE000
  99 #define CONFIG_SPL_MAX_SIZE             8192
 100 #define CONFIG_SPL_RELOC_TEXT_BASE      0x00100000
 101 #define CONFIG_SPL_RELOC_STACK          0x00100000
 102 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) - 0x2000)
 103 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x00200000 - CONFIG_SPL_MAX_SIZE)
 104 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
 105 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0
 106 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
 107 #else
 108 #ifdef CONFIG_TPL_BUILD
 109 #define CONFIG_SPL_NAND_BOOT
 110 #define CONFIG_SPL_FLUSH_IMAGE
 111 #define CONFIG_SPL_ENV_SUPPORT
 112 #define CONFIG_SPL_NAND_INIT
 113 #define CONFIG_SPL_SERIAL_SUPPORT
 114 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 115 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 116 #define CONFIG_SPL_I2C_SUPPORT
 117 #define CONFIG_SPL_NAND_SUPPORT
 118 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
 119 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 120 #define CONFIG_SPL_COMMON_INIT_DDR
 121 #define CONFIG_SPL_MAX_SIZE             (128 << 10)
 122 #define CONFIG_SPL_TEXT_BASE            0xD0001000
 123 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 124 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (576 << 10)
 125 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x11000000)
 126 #define CONFIG_SYS_NAND_U_BOOT_START    (0x11000000)
 127 #define CONFIG_SYS_NAND_U_BOOT_OFFS     ((128 + 128) << 10)
 128 #elif defined(CONFIG_SPL_BUILD)
 129 #define CONFIG_SPL_INIT_MINIMAL
 130 #define CONFIG_SPL_SERIAL_SUPPORT
 131 #define CONFIG_SPL_NAND_SUPPORT
 132 #define CONFIG_SPL_NAND_MINIMAL
 133 #define CONFIG_SPL_FLUSH_IMAGE
 134 #define CONFIG_SPL_TEXT_BASE            0xff800000
 135 #define CONFIG_SPL_MAX_SIZE             8192
 136 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (128 << 10)
 137 #define CONFIG_SYS_NAND_U_BOOT_DST      0xD0000000
 138 #define CONFIG_SYS_NAND_U_BOOT_START    0xD0000000
 139 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (128 << 10)
 140 #endif
 141 #define CONFIG_SPL_PAD_TO       0x20000
 142 #define CONFIG_TPL_PAD_TO       0x20000
 143 #define CONFIG_SPL_TARGET       "u-boot-with-spl.bin"
 144 #define CONFIG_SYS_TEXT_BASE    0x11001000
 145 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
 146 #endif
 147 #endif
 148
 149 #ifdef CONFIG_NAND_SECBOOT      /* NAND Boot */
 150 #define CONFIG_RAMBOOT_NAND
 151 #define CONFIG_SYS_TEXT_BASE            0x11000000
 152 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
 153 #endif
 154
 155 #ifndef CONFIG_SYS_TEXT_BASE
 156 #define CONFIG_SYS_TEXT_BASE            0xeff40000
 157 #endif
 158
 159 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 160 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 161 #endif
 162
 163 #ifdef CONFIG_SPL_BUILD
 164 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 165 #else
 166 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 167 #endif
 168
 169 /* High Level Configuration Options */
 170 #define CONFIG_BOOKE                    /* BOOKE */
 171 #define CONFIG_E500                     /* BOOKE e500 family */
 172 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
 173 #define CONFIG_SYS_HAS_SERDES           /* common SERDES init code */
 174
 175 #define CONFIG_PCI                      /* Enable PCI/PCIE */
 176 #if defined(CONFIG_PCI)
 177 #define CONFIG_PCIE1                    /* PCIE controler 1 (slot 1) */
 178 #define CONFIG_PCIE2                    /* PCIE controler 2 (slot 2) */
 179 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
 180 #define CONFIG_PCI_INDIRECT_BRIDGE      /* indirect PCI bridge support */
 181 #define CONFIG_FSL_PCIE_RESET           /* need PCIe reset errata */
 182 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
 183
 184 #define CONFIG_CMD_NET
 185 #define CONFIG_CMD_PCI
 186
 187 #define CONFIG_E1000                    /*  E1000 pci Ethernet card*/
 188
 189 /*
 190  * PCI Windows
 191  * Memory space is mapped 1-1, but I/O space must start from 0.
 192  */
 193 /* controller 1, Slot 1, tgtid 1, Base address a000 */
 194 #define CONFIG_SYS_PCIE1_NAME           "mini PCIe Slot"
 195 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 196 #ifdef CONFIG_PHYS_64BIT
 197 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 198 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 199 #else
 200 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 201 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 202 #endif
 203 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 204 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc00000
 205 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 206 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 207 #ifdef CONFIG_PHYS_64BIT
 208 #define CONFIG_SYS_PCIE1_IO_PHYS        0xfffc00000ull
 209 #else
 210 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc00000
 211 #endif
 212
 213 /* controller 2, Slot 2, tgtid 2, Base address 9000 */
 214 #if defined(CONFIG_P1010RDB_PA)
 215 #define CONFIG_SYS_PCIE2_NAME           "PCIe Slot"
 216 #elif defined(CONFIG_P1010RDB_PB)
 217 #define CONFIG_SYS_PCIE2_NAME           "mini PCIe Slot"
 218 #endif
 219 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 220 #ifdef CONFIG_PHYS_64BIT
 221 #define CONFIG_SYS_PCIE2_MEM_BUS        0xc0000000
 222 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 223 #else
 224 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 225 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 226 #endif
 227 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 228 #define CONFIG_SYS_PCIE2_IO_VIRT        0xffc10000
 229 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 230 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 231 #ifdef CONFIG_PHYS_64BIT
 232 #define CONFIG_SYS_PCIE2_IO_PHYS        0xfffc10000ull
 233 #else
 234 #define CONFIG_SYS_PCIE2_IO_PHYS        0xffc10000
 235 #endif
 236
 237 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 238
 239 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 240 #define CONFIG_DOS_PARTITION
 241 #endif
 242
 243 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
 244 #define CONFIG_TSEC_ENET
 245 #define CONFIG_ENV_OVERWRITE
 246
 247 #define CONFIG_DDR_CLK_FREQ     66666666 /* DDRCLK on P1010 RDB */
 248 #define CONFIG_SYS_CLK_FREQ     66666666 /* SYSCLK for P1010 RDB */
 249
 250 #define CONFIG_MISC_INIT_R
 251 #define CONFIG_HWCONFIG
 252 /*
 253  * These can be toggled for performance analysis, otherwise use default.
 254  */
 255 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
 256 #define CONFIG_BTB                      /* toggle branch predition */
 257
 258 #define CONFIG_ADDR_STREAMING           /* toggle addr streaming */
 259
 260 #define CONFIG_ENABLE_36BIT_PHYS
 261
 262 #ifdef CONFIG_PHYS_64BIT
 263 #define CONFIG_ADDR_MAP                 1
 264 #define CONFIG_SYS_NUM_ADDR_MAP         16      /* number of TLB1 entries */
 265 #endif
 266
 267 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 268 #define CONFIG_SYS_MEMTEST_END          0x1fffffff
 269 #define CONFIG_PANIC_HANG               /* do not reset board on panic */
 270
 271 /* DDR Setup */
 272 #define CONFIG_SYS_FSL_DDR3
 273 #define CONFIG_SYS_DDR_RAW_TIMING
 274 #define CONFIG_DDR_SPD
 275 #define CONFIG_SYS_SPD_BUS_NUM          1
 276 #define SPD_EEPROM_ADDRESS              0x52
 277
 278 #define CONFIG_MEM_INIT_VALUE           0xDeadBeef
 279
 280 #ifndef __ASSEMBLY__
 281 extern unsigned long get_sdram_size(void);
 282 #endif
 283 #define CONFIG_SYS_SDRAM_SIZE           get_sdram_size() /* DDR size */
 284 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 285 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 286
 287 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 288 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
 289
 290 /* DDR3 Controller Settings */
 291 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000003f
 292 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80014302
 293 #define CONFIG_SYS_DDR_CS0_CONFIG_2     0x00000000
 294 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 295 #define CONFIG_SYS_DDR_INIT_ADDR        0x00000000
 296 #define CONFIG_SYS_DDR_INIT_EXT_ADDR    0x00000000
 297 #define CONFIG_SYS_DDR_MODE_CONTROL     0x00000000
 298 #define CONFIG_SYS_DDR_ZQ_CONTROL       0x89080600
 299 #define CONFIG_SYS_DDR_SR_CNTR          0x00000000
 300 #define CONFIG_SYS_DDR_RCW_1            0x00000000
 301 #define CONFIG_SYS_DDR_RCW_2            0x00000000
 302 #define CONFIG_SYS_DDR_CONTROL          0xc70c0008      /* Type = DDR3  */
 303 #define CONFIG_SYS_DDR_CONTROL_2        0x24401000
 304 #define CONFIG_SYS_DDR_TIMING_4         0x00000001
 305 #define CONFIG_SYS_DDR_TIMING_5         0x03402400
 306
 307 #define CONFIG_SYS_DDR_TIMING_3_800     0x00030000
 308 #define CONFIG_SYS_DDR_TIMING_0_800     0x00110104
 309 #define CONFIG_SYS_DDR_TIMING_1_800     0x6f6b8644
 310 #define CONFIG_SYS_DDR_TIMING_2_800     0x0FA888CF
 311 #define CONFIG_SYS_DDR_CLK_CTRL_800     0x03000000
 312 #define CONFIG_SYS_DDR_MODE_1_800       0x00441420
 313 #define CONFIG_SYS_DDR_MODE_2_800       0x00000000
 314 #define CONFIG_SYS_DDR_INTERVAL_800     0x0C300100
 315 #define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8675f608
 316
 317 /* settings for DDR3 at 667MT/s */
 318 #define CONFIG_SYS_DDR_TIMING_3_667             0x00010000
 319 #define CONFIG_SYS_DDR_TIMING_0_667             0x00110004
 320 #define CONFIG_SYS_DDR_TIMING_1_667             0x5d59e544
 321 #define CONFIG_SYS_DDR_TIMING_2_667             0x0FA890CD
 322 #define CONFIG_SYS_DDR_CLK_CTRL_667             0x03000000
 323 #define CONFIG_SYS_DDR_MODE_1_667               0x00441210
 324 #define CONFIG_SYS_DDR_MODE_2_667               0x00000000
 325 #define CONFIG_SYS_DDR_INTERVAL_667             0x0a280000
 326 #define CONFIG_SYS_DDR_WRLVL_CONTROL_667        0x8675F608
 327
 328 #define CONFIG_SYS_CCSRBAR                      0xffe00000
 329 #define CONFIG_SYS_CCSRBAR_PHYS_LOW             CONFIG_SYS_CCSRBAR
 330
 331 /* Don't relocate CCSRBAR while in NAND_SPL */
 332 #ifdef CONFIG_SPL_BUILD
 333 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 334 #endif
 335
 336 /*
 337  * Memory map
 338  *
 339  * 0x0000_0000  0x3fff_ffff     DDR                     1G cacheable
 340  * 0x8000_0000  0xbfff_ffff     PCI Express Mem         1.5G non-cacheable
 341  * 0xffc0_0000  0xffc3_ffff     PCI IO range            256k non-cacheable
 342  *
 343  * Localbus non-cacheable
 344  * 0xff80_0000  0xff8f_ffff     NAND Flash              1M non-cacheable
 345  * 0xffb0_0000  0xffbf_ffff     Board CPLD              1M non-cacheable
 346  * 0xffd0_0000  0xffd0_3fff     L1 for stack            16K Cacheable TLB0
 347  * 0xffe0_0000  0xffef_ffff     CCSR                    1M non-cacheable
 348  */
 349
 350 /*
 351  * IFC Definitions
 352  */
 353 /* NOR Flash on IFC */
 354 #ifdef CONFIG_SPL_BUILD
 355 #define CONFIG_SYS_NO_FLASH
 356 #endif
 357
 358 #define CONFIG_SYS_FLASH_BASE           0xee000000
 359 #define CONFIG_SYS_MAX_FLASH_SECT       256     /* 32M */
 360
 361 #ifdef CONFIG_PHYS_64BIT
 362 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 363 #else
 364 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 365 #endif
 366
 367 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 368                                 CSPR_PORT_SIZE_16 | \
 369                                 CSPR_MSEL_NOR | \
 370                                 CSPR_V)
 371 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(32*1024*1024)
 372 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(7)
 373 /* NOR Flash Timing Params */
 374 #define CONFIG_SYS_NOR_FTIM0    FTIM0_NOR_TACSE(0x4) | \
 375                                 FTIM0_NOR_TEADC(0x5) | \
 376                                 FTIM0_NOR_TEAHC(0x5)
 377 #define CONFIG_SYS_NOR_FTIM1    FTIM1_NOR_TACO(0x1e) | \
 378                                 FTIM1_NOR_TRAD_NOR(0x0f)
 379 #define CONFIG_SYS_NOR_FTIM2    FTIM2_NOR_TCS(0x4) | \
 380                                 FTIM2_NOR_TCH(0x4) | \
 381                                 FTIM2_NOR_TWP(0x1c)
 382 #define CONFIG_SYS_NOR_FTIM3    0x0
 383
 384 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 385 #define CONFIG_SYS_FLASH_QUIET_TEST
 386 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 387 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 388
 389 #undef CONFIG_SYS_FLASH_CHECKSUM
 390 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 391 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 392
 393 /* CFI for NOR Flash */
 394 #define CONFIG_FLASH_CFI_DRIVER
 395 #define CONFIG_SYS_FLASH_CFI
 396 #define CONFIG_SYS_FLASH_EMPTY_INFO
 397 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 398
 399 /* NAND Flash on IFC */
 400 #define CONFIG_SYS_NAND_BASE            0xff800000
 401 #ifdef CONFIG_PHYS_64BIT
 402 #define CONFIG_SYS_NAND_BASE_PHYS       0xfff800000ull
 403 #else
 404 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 405 #endif
 406
 407 #define CONFIG_MTD_DEVICE
 408 #define CONFIG_MTD_PARTITION
 409 #define CONFIG_CMD_MTDPARTS
 410 #define MTDIDS_DEFAULT                  "nand0=ff800000.flash"
 411 #define MTDPARTS_DEFAULT                \
 412         "mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
 413
 414 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 415                                 | CSPR_PORT_SIZE_8      \
 416                                 | CSPR_MSEL_NAND        \
 417                                 | CSPR_V)
 418 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 419
 420 #if defined(CONFIG_P1010RDB_PA)
 421 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 422                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 423                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 424                                 | CSOR_NAND_RAL_2       /* RAL = 2 Bytes */ \
 425                                 | CSOR_NAND_PGS_512     /* Page Size = 512b */ \
 426                                 | CSOR_NAND_SPRZ_16     /* Spare size = 16 */ \
 427                                 | CSOR_NAND_PB(32))     /* 32 Pages Per Block */
 428 #define CONFIG_SYS_NAND_BLOCK_SIZE      (16 * 1024)
 429
 430 #elif defined(CONFIG_P1010RDB_PB)
 431 #define CONFIG_SYS_NAND_ONFI_DETECTION
 432 #define CONFIG_SYS_NAND_CSOR   (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 433                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 434                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 435                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 436                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 437                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 438                                 | CSOR_NAND_PB(128))  /*Pages Per Block = 128 */
 439 #define CONFIG_SYS_NAND_BLOCK_SIZE     (512 * 1024)
 440 #endif
 441
 442 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 443 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 444 #define CONFIG_MTD_NAND_VERIFY_WRITE
 445 #define CONFIG_CMD_NAND
 446
 447 #if defined(CONFIG_P1010RDB_PA)
 448 /* NAND Flash Timing Params */
 449 #define CONFIG_SYS_NAND_FTIM0           FTIM0_NAND_TCCST(0x01) | \
 450                                         FTIM0_NAND_TWP(0x0C)   | \
 451                                         FTIM0_NAND_TWCHT(0x04) | \
 452                                         FTIM0_NAND_TWH(0x05)
 453 #define CONFIG_SYS_NAND_FTIM1           FTIM1_NAND_TADLE(0x1d) | \
 454                                         FTIM1_NAND_TWBE(0x1d)  | \
 455                                         FTIM1_NAND_TRR(0x07)   | \
 456                                         FTIM1_NAND_TRP(0x0c)
 457 #define CONFIG_SYS_NAND_FTIM2           FTIM2_NAND_TRAD(0x0c) | \
 458                                         FTIM2_NAND_TREH(0x05) | \
 459                                         FTIM2_NAND_TWHRE(0x0f)
 460 #define CONFIG_SYS_NAND_FTIM3           FTIM3_NAND_TWW(0x04)
 461
 462 #elif defined(CONFIG_P1010RDB_PB)
 463 /* support MT29F16G08ABABAWP 4k-pagesize 2G-bytes NAND */
 464 /* ONFI NAND Flash mode0 Timing Params */
 465 #define CONFIG_SYS_NAND_FTIM0  (FTIM0_NAND_TCCST(0x07)| \
 466                                         FTIM0_NAND_TWP(0x18)   | \
 467                                         FTIM0_NAND_TWCHT(0x07) | \
 468                                         FTIM0_NAND_TWH(0x0a))
 469 #define CONFIG_SYS_NAND_FTIM1  (FTIM1_NAND_TADLE(0x32)| \
 470                                         FTIM1_NAND_TWBE(0x39)  | \
 471                                         FTIM1_NAND_TRR(0x0e)   | \
 472                                         FTIM1_NAND_TRP(0x18))
 473 #define CONFIG_SYS_NAND_FTIM2  (FTIM2_NAND_TRAD(0x0f) | \
 474                                         FTIM2_NAND_TREH(0x0a)  | \
 475                                         FTIM2_NAND_TWHRE(0x1e))
 476 #define CONFIG_SYS_NAND_FTIM3   0x0
 477 #endif
 478
 479 #define CONFIG_SYS_NAND_DDR_LAW         11
 480
 481 /* Set up IFC registers for boot location NOR/NAND */
 482 #if defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT)
 483 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 484 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 485 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 486 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 487 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 488 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 489 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 490 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 491 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 492 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 493 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 494 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 495 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 496 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 497 #else
 498 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 499 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 500 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 501 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 502 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 503 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 504 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 505 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 506 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 507 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 508 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 509 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 510 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 511 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 512 #endif
 513
 514 /* CPLD on IFC */
 515 #define CONFIG_SYS_CPLD_BASE            0xffb00000
 516
 517 #ifdef CONFIG_PHYS_64BIT
 518 #define CONFIG_SYS_CPLD_BASE_PHYS       0xfffb00000ull
 519 #else
 520 #define CONFIG_SYS_CPLD_BASE_PHYS       CONFIG_SYS_CPLD_BASE
 521 #endif
 522
 523 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 524                                 | CSPR_PORT_SIZE_8 \
 525                                 | CSPR_MSEL_GPCM \
 526                                 | CSPR_V)
 527 #define CONFIG_SYS_AMASK3               IFC_AMASK(64*1024)
 528 #define CONFIG_SYS_CSOR3                0x0
 529 /* CPLD Timing parameters for IFC CS3 */
 530 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 531                                         FTIM0_GPCM_TEADC(0x0e) | \
 532                                         FTIM0_GPCM_TEAHC(0x0e))
 533 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 534                                         FTIM1_GPCM_TRAD(0x1f))
 535 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 536                                         FTIM2_GPCM_TCH(0x8) | \
 537                                         FTIM2_GPCM_TWP(0x1f))
 538 #define CONFIG_SYS_CS3_FTIM3            0x0
 539
 540 #if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) || \
 541         defined(CONFIG_RAMBOOT_NAND)
 542 #define CONFIG_SYS_RAMBOOT
 543 #define CONFIG_SYS_EXTRA_ENV_RELOC
 544 #else
 545 #undef CONFIG_SYS_RAMBOOT
 546 #endif
 547
 548 #ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A003399
 549 #if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT)
 550 #define CONFIG_A003399_NOR_WORKAROUND
 551 #endif
 552 #endif
 553
 554 #define CONFIG_BOARD_EARLY_INIT_F       /* Call board_pre_init */
 555 #define CONFIG_BOARD_EARLY_INIT_R
 556
 557 #define CONFIG_SYS_INIT_RAM_LOCK
 558 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000 /* stack in RAM */
 559 #define CONFIG_SYS_INIT_RAM_END         0x00004000 /* End of used area in RAM */
 560
 561 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END \
 562                                                 - GENERATED_GBL_DATA_SIZE)
 563 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 564
 565 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 566 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc*/
 567
 568 /*
 569  * Config the L2 Cache as L2 SRAM
 570  */
 571 #if defined(CONFIG_SPL_BUILD)
 572 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
 573 #define CONFIG_SYS_INIT_L2_ADDR         0xD0000000
 574 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 575 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 576 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 577 #define CONFIG_SPL_RELOC_TEXT_BASE      0xD0001000
 578 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
 579 #define CONFIG_SPL_RELOC_STACK_SIZE     (16 << 10)
 580 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024)
 581 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (128 << 10)
 582 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 96 * 1024)
 583 #elif defined(CONFIG_NAND)
 584 #ifdef CONFIG_TPL_BUILD
 585 #define CONFIG_SYS_INIT_L2_ADDR         0xD0000000
 586 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 587 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 588 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 589 #define CONFIG_SPL_RELOC_TEXT_BASE      0xD0001000
 590 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024)
 591 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024)
 592 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (48 << 10)
 593 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024)
 594 #else
 595 #define CONFIG_SYS_INIT_L2_ADDR         0xD0000000
 596 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 597 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 598 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 599 #define CONFIG_SPL_RELOC_TEXT_BASE      (CONFIG_SYS_INIT_L2_END - 0x3000)
 600 #define CONFIG_SPL_RELOC_STACK          ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
 601 #endif
 602 #endif
 603 #endif
 604
 605 /* Serial Port */
 606 #define CONFIG_CONS_INDEX       1
 607 #undef  CONFIG_SERIAL_SOFTWARE_FIFO
 608 #define CONFIG_SYS_NS16550
 609 #define CONFIG_SYS_NS16550_SERIAL
 610 #define CONFIG_SYS_NS16550_REG_SIZE     1
 611 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 612 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
 613 #define CONFIG_NS16550_MIN_FUNCTIONS
 614 #endif
 615
 616 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 617
 618 #define CONFIG_SYS_BAUDRATE_TABLE       \
 619         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 620
 621 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 622 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 623
 624 /* Use the HUSH parser */
 625 #define CONFIG_SYS_HUSH_PARSER
 626
 627 /*
 628  * Pass open firmware flat tree
 629  */
 630 #define CONFIG_OF_LIBFDT
 631 #define CONFIG_OF_BOARD_SETUP
 632 #define CONFIG_OF_STDOUT_VIA_ALIAS
 633
 634 /* new uImage format support */
 635 #define CONFIG_FIT
 636 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 637
 638 /* I2C */
 639 #define CONFIG_SYS_I2C
 640 #define CONFIG_SYS_I2C_FSL
 641 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 642 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 643 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 644 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 645 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 646 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 647 #define I2C_PCA9557_ADDR1               0x18
 648 #define I2C_PCA9557_ADDR2               0x19
 649 #define I2C_PCA9557_BUS_NUM             0
 650
 651 /* I2C EEPROM */
 652 #if defined(CONFIG_P1010RDB_PB)
 653 #define CONFIG_ID_EEPROM
 654 #ifdef CONFIG_ID_EEPROM
 655 #define CONFIG_SYS_I2C_EEPROM_NXID
 656 #endif
 657 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 658 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 659 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 660 #define MAX_NUM_PORTS                   9 /* for 128Bytes EEPROM */
 661 #endif
 662 /* enable read and write access to EEPROM */
 663 #define CONFIG_CMD_EEPROM
 664 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 665 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 666 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 667 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 668
 669 /* RTC */
 670 #define CONFIG_RTC_PT7C4338
 671 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 672
 673 #define CONFIG_CMD_I2C
 674
 675 /*
 676  * SPI interface will not be available in case of NAND boot SPI CS0 will be
 677  * used for SLIC
 678  */
 679 #if !defined(CONFIG_NAND) || !defined(CONFIG_NAND_SECBOOT)
 680 /* eSPI - Enhanced SPI */
 681 #define CONFIG_FSL_ESPI
 682 #define CONFIG_SPI_FLASH
 683 #define CONFIG_SPI_FLASH_SPANSION
 684 #define CONFIG_CMD_SF
 685 #define CONFIG_SF_DEFAULT_SPEED         10000000
 686 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 687 #endif
 688
 689 #if defined(CONFIG_TSEC_ENET)
 690 #define CONFIG_MII                      /* MII PHY management */
 691 #define CONFIG_MII_DEFAULT_TSEC 1       /* Allow unregistered phys */
 692 #define CONFIG_TSEC1    1
 693 #define CONFIG_TSEC1_NAME       "eTSEC1"
 694 #define CONFIG_TSEC2    1
 695 #define CONFIG_TSEC2_NAME       "eTSEC2"
 696 #define CONFIG_TSEC3    1
 697 #define CONFIG_TSEC3_NAME       "eTSEC3"
 698
 699 #define TSEC1_PHY_ADDR          1
 700 #define TSEC2_PHY_ADDR          0
 701 #define TSEC3_PHY_ADDR          2
 702
 703 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 704 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 705 #define TSEC3_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 706
 707 #define TSEC1_PHYIDX            0
 708 #define TSEC2_PHYIDX            0
 709 #define TSEC3_PHYIDX            0
 710
 711 #define CONFIG_ETHPRIME         "eTSEC1"
 712
 713 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 714
 715 /* TBI PHY configuration for SGMII mode */
 716 #define CONFIG_TSEC_TBICR_SETTINGS ( \
 717                 TBICR_PHY_RESET \
 718                 | TBICR_ANEG_ENABLE \
 719                 | TBICR_FULL_DUPLEX \
 720                 | TBICR_SPEED1_SET \
 721                 )
 722
 723 #endif  /* CONFIG_TSEC_ENET */
 724
 725
 726 /* SATA */
 727 #define CONFIG_FSL_SATA
 728 #define CONFIG_FSL_SATA_V2
 729 #define CONFIG_LIBATA
 730
 731 #ifdef CONFIG_FSL_SATA
 732 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 733 #define CONFIG_SATA1
 734 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 735 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 736 #define CONFIG_SATA2
 737 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 738 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 739
 740 #define CONFIG_CMD_SATA
 741 #define CONFIG_LBA48
 742 #endif /* #ifdef CONFIG_FSL_SATA  */
 743
 744 #define CONFIG_MMC
 745 #ifdef CONFIG_MMC
 746 #define CONFIG_CMD_MMC
 747 #define CONFIG_DOS_PARTITION
 748 #define CONFIG_FSL_ESDHC
 749 #define CONFIG_GENERIC_MMC
 750 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 751 #endif
 752
 753 #define CONFIG_HAS_FSL_DR_USB
 754
 755 #if defined(CONFIG_HAS_FSL_DR_USB)
 756 #define CONFIG_USB_EHCI
 757
 758 #ifdef CONFIG_USB_EHCI
 759 #define CONFIG_CMD_USB
 760 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 761 #define CONFIG_USB_EHCI_FSL
 762 #define CONFIG_USB_STORAGE
 763 #endif
 764 #endif
 765
 766 /*
 767  * Environment
 768  */
 769 #if defined(CONFIG_SDCARD)
 770 #define CONFIG_ENV_IS_IN_MMC
 771 #define CONFIG_FSL_FIXED_MMC_LOCATION
 772 #define CONFIG_SYS_MMC_ENV_DEV          0
 773 #define CONFIG_ENV_SIZE                 0x2000
 774 #elif defined(CONFIG_SPIFLASH)
 775 #define CONFIG_ENV_IS_IN_SPI_FLASH
 776 #define CONFIG_ENV_SPI_BUS      0
 777 #define CONFIG_ENV_SPI_CS       0
 778 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 779 #define CONFIG_ENV_SPI_MODE     0
 780 #define CONFIG_ENV_OFFSET       0x100000        /* 1MB */
 781 #define CONFIG_ENV_SECT_SIZE    0x10000
 782 #define CONFIG_ENV_SIZE         0x2000
 783 #elif defined(CONFIG_NAND)
 784 #define CONFIG_ENV_IS_IN_NAND
 785 #ifdef CONFIG_TPL_BUILD
 786 #define CONFIG_ENV_SIZE         0x2000
 787 #define CONFIG_ENV_ADDR         (CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
 788 #else
 789 #if defined(CONFIG_P1010RDB_PA)
 790 #define CONFIG_ENV_SIZE         CONFIG_SYS_NAND_BLOCK_SIZE
 791 #define CONFIG_ENV_RANGE        (3 * CONFIG_ENV_SIZE) /* 3*16=48K for env */
 792 #elif defined(CONFIG_P1010RDB_PB)
 793 #define CONFIG_ENV_SIZE         (16 * 1024)
 794 #define CONFIG_ENV_RANGE        (32 * CONFIG_ENV_SIZE) /* new block size 512K */
 795 #endif
 796 #endif
 797 #define CONFIG_ENV_OFFSET       (1024 * 1024)
 798 #elif defined(CONFIG_SYS_RAMBOOT)
 799 #define CONFIG_ENV_IS_NOWHERE           /* Store ENV in memory only */
 800 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_MONITOR_BASE - 0x1000)
 801 #define CONFIG_ENV_SIZE                 0x2000
 802 #else
 803 #define CONFIG_ENV_IS_IN_FLASH
 804 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 805 #define CONFIG_ENV_SIZE         0x2000
 806 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 807 #endif
 808
 809 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 810 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 811
 812 /*
 813  * Command line configuration.
 814  */
 815 #include <config_cmd_default.h>
 816
 817 #define CONFIG_CMD_DATE
 818 #define CONFIG_CMD_ERRATA
 819 #define CONFIG_CMD_ELF
 820 #define CONFIG_CMD_IRQ
 821 #define CONFIG_CMD_MII
 822 #define CONFIG_CMD_PING
 823 #define CONFIG_CMD_SETEXPR
 824 #define CONFIG_CMD_REGINFO
 825
 826 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 827
 828 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \
 829                  || defined(CONFIG_FSL_SATA)
 830 #define CONFIG_CMD_EXT2
 831 #define CONFIG_CMD_FAT
 832 #define CONFIG_DOS_PARTITION
 833 #endif
 834
 835 /*
 836  * Miscellaneous configurable options
 837  */
 838 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 839 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 840 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 841 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 842
 843 #if defined(CONFIG_CMD_KGDB)
 844 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 845 #else
 846 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 847 #endif
 848 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 849                                                 /* Print Buffer Size */
 850 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 851 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 852
 853 /*
 854  * Internal Definitions
 855  *
 856  * Boot Flags
 857  */
 858 #define BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH */
 859 #define BOOTFLAG_WARM   0x02            /* Software reboot */
 860
 861 /*
 862  * For booting Linux, the board info and command line data
 863  * have to be in the first 64 MB of memory, since this is
 864  * the maximum mapped by the Linux kernel during initialization.
 865  */
 866 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20) /* Initial Memory map for Linux */
 867 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 868
 869 #if defined(CONFIG_CMD_KGDB)
 870 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 871 #endif
 872
 873 /*
 874  * Environment Configuration
 875  */
 876
 877 #if defined(CONFIG_TSEC_ENET)
 878 #define CONFIG_HAS_ETH0
 879 #define CONFIG_HAS_ETH1
 880 #define CONFIG_HAS_ETH2
 881 #endif
 882
 883 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 884 #define CONFIG_BOOTFILE         "uImage"
 885 #define CONFIG_UBOOTPATH        u-boot.bin/* U-Boot image on TFTP server */
 886
 887 /* default location for tftp and bootm */
 888 #define CONFIG_LOADADDR         1000000
 889
 890 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 891 #undef  CONFIG_BOOTARGS         /* the boot command will set bootargs */
 892
 893 #define CONFIG_BAUDRATE         115200
 894
 895 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 896         "hwconfig=" __stringify(CONFIG_DEF_HWCONFIG)  "\0"      \
 897         "netdev=eth0\0"                                         \
 898         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 899         "loadaddr=1000000\0"                    \
 900         "consoledev=ttyS0\0"                            \
 901         "ramdiskaddr=2000000\0"                 \
 902         "ramdiskfile=rootfs.ext2.gz.uboot\0"            \
 903         "fdtaddr=c00000\0"                              \
 904         "fdtfile=p1010rdb.dtb\0"                \
 905         "bdev=sda1\0"   \
 906         "hwconfig=usb1:dr_mode=host,phy_type=utmi\0"    \
 907         "othbootargs=ramdisk_size=600000\0" \
 908         "usbfatboot=setenv bootargs root=/dev/ram rw "  \
 909         "console=$consoledev,$baudrate $othbootargs; "  \
 910         "usb start;"                    \
 911         "fatload usb 0:2 $loadaddr $bootfile;"          \
 912         "fatload usb 0:2 $fdtaddr $fdtfile;"    \
 913         "fatload usb 0:2 $ramdiskaddr $ramdiskfile;"    \
 914         "bootm $loadaddr $ramdiskaddr $fdtaddr\0"               \
 915         "usbext2boot=setenv bootargs root=/dev/ram rw " \
 916         "console=$consoledev,$baudrate $othbootargs; "  \
 917         "usb start;"                    \
 918         "ext2load usb 0:4 $loadaddr $bootfile;"         \
 919         "ext2load usb 0:4 $fdtaddr $fdtfile;"   \
 920         "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;"   \
 921         "bootm $loadaddr $ramdiskaddr $fdtaddr\0"       \
 922         CONFIG_BOOTMODE
 923
 924 #if defined(CONFIG_P1010RDB_PA)
 925 #define CONFIG_BOOTMODE \
 926         "boot_bank0=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \
 927         "mw.b ffb00011 0; mw.b ffb00009 0; reset\0" \
 928         "boot_bank1=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \
 929         "mw.b ffb00011 0; mw.b ffb00009 1; reset\0" \
 930         "boot_nand=i2c dev 0; i2c mw 18 1 f9; i2c mw 18 3 f0;" \
 931         "mw.b ffb00011 0; mw.b ffb00017 1; reset\0"
 932
 933 #elif defined(CONFIG_P1010RDB_PB)
 934 #define CONFIG_BOOTMODE \
 935         "boot_bank0=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \
 936         "i2c mw 19 1 2; i2c mw 19 3 e1; reset\0" \
 937         "boot_bank1=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \
 938         "i2c mw 19 1 12; i2c mw 19 3 e1; reset\0" \
 939         "boot_nand=i2c dev 0; i2c mw 18 1 fc; i2c mw 18 3 0;" \
 940         "i2c mw 19 1 8; i2c mw 19 3 f7; reset\0" \
 941         "boot_spi=i2c dev 0; i2c mw 18 1 fa; i2c mw 18 3 0;" \
 942         "i2c mw 19 1 0; i2c mw 19 3 f7; reset\0" \
 943         "boot_sd=i2c dev 0; i2c mw 18 1 f8; i2c mw 18 3 0;" \
 944         "i2c mw 19 1 4; i2c mw 19 3 f3; reset\0"
 945 #endif
 946
 947 #define CONFIG_RAMBOOTCOMMAND           \
 948         "setenv bootargs root=/dev/ram rw "     \
 949         "console=$consoledev,$baudrate $othbootargs; "  \
 950         "tftp $ramdiskaddr $ramdiskfile;"       \
 951         "tftp $loadaddr $bootfile;"             \
 952         "tftp $fdtaddr $fdtfile;"               \
 953         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 954
 955 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
 956
 957 #include <asm/fsl_secure_boot.h>
 958
 959 #endif  /* __CONFIG_H */