include/configs/P2020COME.h

   1 /*
   2  * Copyright 2009-2010,2012 Freescale Semiconductor, Inc.
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22
  23 #ifndef __CONFIG_H
  24 #define __CONFIG_H
  25
  26 /* The P2020COME board is only booted via the Freescale On-Chip ROM */
  27 #define CONFIG_SYS_RAMBOOT
  28 #define CONFIG_SYS_EXTRA_ENV_RELOC
  29
  30 #define CONFIG_SYS_TEXT_BASE            0xf8f80000
  31 #define CONFIG_RESET_VECTOR_ADDRESS     0xf8fffffc
  32
  33 #ifdef CONFIG_SDCARD
  34 #define CONFIG_RAMBOOT_SDCARD           1
  35 #endif
  36
  37 #ifdef CONFIG_SPIFLASH
  38 #define CONFIG_RAMBOOT_SPIFLASH         1
  39 #endif
  40
  41 #ifndef CONFIG_SYS_MONITOR_BASE
  42 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
  43 #endif
  44
  45 /* High Level Configuration Options */
  46 #define CONFIG_BOOKE            1       /* BOOKE */
  47 #define CONFIG_E500             1       /* BOOKE e500 family */
  48 #define CONFIG_MPC85xx          1       /* MPC8540/60/55/41/48/P1020/P2020,etc*/
  49 #define CONFIG_P2020            1
  50 #define CONFIG_P2020COME        1
  51 #define CONFIG_FSL_ELBC         1       /* Enable eLBC Support */
  52 #define CONFIG_MP
  53
  54 #define CONFIG_PCI              1       /* Enable PCI/PCIE */
  55 #if defined(CONFIG_PCI)
  56 #define CONFIG_PCIE1            1       /* PCIE controller 1 (slot 1) */
  57 #define CONFIG_PCIE2            1       /* PCIE controller 2 (slot 2) */
  58 #define CONFIG_PCIE3            1       /* PCIE controller 3 (slot 3) */
  59
  60 #define CONFIG_FSL_PCI_INIT     1       /* Use common FSL init code */
  61 #define CONFIG_FSL_PCIE_RESET   1       /* need PCIe reset errata */
  62 #define CONFIG_SYS_PCI_64BIT    1       /* enable 64-bit PCI resources */
  63 #endif /* #if defined(CONFIG_PCI) */
  64 #define CONFIG_FSL_LAW          1       /* Use common FSL init code */
  65 #define CONFIG_TSEC_ENET                /* tsec ethernet support */
  66 #define CONFIG_ENV_OVERWRITE
  67
  68 #if defined(CONFIG_PCI)
  69 #define CONFIG_E1000            1       /* E1000 pci Ethernet card */
  70 #endif
  71
  72 #ifndef __ASSEMBLY__
  73 extern unsigned long get_board_ddr_clk(unsigned long dummy);
  74 extern unsigned long get_board_sys_clk(unsigned long dummy);
  75 #endif
  76
  77 /*
  78  * For P2020COME DDRCLK and SYSCLK are from the same oscillator
  79  * For DA phase the SYSCLK is 66MHz
  80  * For EA phase the SYSCLK is 100MHz
  81  */
  82 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk(0)
  83 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk(0)
  84
  85 #define CONFIG_HWCONFIG
  86
  87 /*
  88  * These can be toggled for performance analysis, otherwise use default.
  89  */
  90 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
  91 #define CONFIG_BTB                      /* toggle branch prediction */
  92
  93 #define CONFIG_ADDR_STREAMING           /* toggle addr streaming */
  94
  95 #define CONFIG_ENABLE_36BIT_PHYS        1
  96
  97 #ifdef CONFIG_PHYS_64BIT
  98 #define CONFIG_ADDR_MAP                 1
  99 #define CONFIG_SYS_NUM_ADDR_MAP         16      /* number of TLB1 entries */
 100 #endif
 101
 102 #define CONFIG_SYS_MEMTEST_START        0x00000000      /* memtest works on */
 103 #define CONFIG_SYS_MEMTEST_END          0x1fffffff
 104 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 105
 106  /*
 107   * Config the L2 Cache as L2 SRAM
 108   */
 109 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
 110 #ifdef CONFIG_PHYS_64BIT
 111 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    0xff8f80000ull
 112 #else
 113 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 114 #endif
 115 #define CONFIG_SYS_L2_SIZE              (512 << 10)
 116 #define CONFIG_SYS_INIT_L2_END          (CONFIG_SYS_INIT_L2_ADDR \
 117                                         + CONFIG_SYS_L2_SIZE)
 118
 119 #define CONFIG_SYS_CCSRBAR              0xffe00000
 120 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
 121
 122 /* DDR Setup */
 123 #define CONFIG_FSL_DDR3
 124 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup */
 125 #define CONFIG_DDR_SPD
 126
 127 #define CONFIG_DDR_ECC
 128 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 129 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 130
 131 #define CONFIG_SYS_SDRAM_SIZE           2048ULL /* DDR size on P2020COME */
 132 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 133 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 134
 135 #define CONFIG_NUM_DDR_CONTROLLERS      1
 136 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 137 #define CONFIG_CHIP_SELECTS_PER_CTRL    2
 138
 139 #define CONFIG_SYS_DDR_ERR_INT_EN       0x0000000d
 140 #define CONFIG_SYS_DDR_ERR_DIS          0x00000000
 141 #define CONFIG_SYS_DDR_SBE              0x00ff0000
 142
 143 #define CONFIG_SYS_SPD_BUS_NUM          1
 144 #define SPD_EEPROM_ADDRESS              0x53
 145
 146 /*
 147  * Memory map
 148  *
 149  * 0x0000_0000  0x7fff_ffff     DDR3                    2G Cacheable
 150  * 0x8000_0000  0x9fff_ffff     PCI Express 3 Mem       1G non-cacheable
 151  * 0xa000_0000  0xbfff_ffff     PCI Express 2 Mem       1G non-cacheable
 152  * 0xc000_0000  0xdfff_ffff     PCI Express 1 Mem       1G non-cacheable
 153  * 0xffc1_0000  0xffc1_ffff     PCI Express 3 IO        64K non-cacheable
 154  * 0xffc2_0000  0xffc2_ffff     PCI Express 2 IO        64K non-cacheable
 155  * 0xffc3_0000  0xffc3_ffff     PCI Express 1 IO        64K non-cacheable
 156  *
 157  * 0xffd0_0000  0xffd0_3fff     L1 for stack            16K Cacheable TLB0
 158  * 0xffe0_0000  0xffef_ffff     CCSR                    1M non-cacheable
 159  */
 160
 161 /*
 162  * Local Bus Definitions
 163  */
 164
 165 /* There is no NOR Flash on P2020COME */
 166 #define CONFIG_SYS_NO_FLASH
 167
 168 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 169 #define CONFIG_HWCONFIG
 170
 171 #define CONFIG_SYS_INIT_RAM_LOCK        1
 172 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000      /* stack in RAM */
 173 #ifdef CONFIG_PHYS_64BIT
 174 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 175 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       CONFIG_SYS_INIT_RAM_ADDR
 176 /* the assembler doesn't like typecast */
 177 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 178         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 179           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 180 #else
 181 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR
 182 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 183 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 184 #endif
 185 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000
 186
 187 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE \
 188                                                 - GENERATED_GBL_DATA_SIZE)
 189 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 190
 191 #define CONFIG_SYS_MONITOR_LEN          (256 * 1024)
 192 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)
 193
 194 /* Serial Port - controlled on board with jumper J8
 195  * open - index 2
 196  * shorted - index 1
 197  */
 198 #define CONFIG_CONS_INDEX               1
 199 #define CONFIG_SYS_NS16550
 200 #define CONFIG_SYS_NS16550_SERIAL
 201 #define CONFIG_SYS_NS16550_REG_SIZE     1
 202 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 203
 204 #define CONFIG_SERIAL_MULTI     1 /* Enable both serial ports */
 205 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 206
 207 #define CONFIG_SYS_BAUDRATE_TABLE   \
 208         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 209
 210 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 211 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 212
 213 /* Use the HUSH parser */
 214 #define CONFIG_SYS_HUSH_PARSER
 215
 216 /*
 217  * Pass open firmware flat tree
 218  */
 219 #define CONFIG_OF_LIBFDT                1
 220 #define CONFIG_OF_BOARD_SETUP           1
 221 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
 222
 223 /* new uImage format support */
 224 #define CONFIG_FIT                      1
 225 #define CONFIG_FIT_VERBOSE              1
 226
 227 /* I2C */
 228 #define CONFIG_FSL_I2C          /* Use FSL common I2C driver */
 229 #define CONFIG_HARD_I2C         /* I2C with hardware support */
 230 #undef  CONFIG_SOFT_I2C         /* I2C bit-banged */
 231 #define CONFIG_I2C_MULTI_BUS
 232 #define CONFIG_I2C_CMD_TREE
 233 #define CONFIG_SYS_I2C_SPEED            400000  /* I2C speed and slave address*/
 234 #define CONFIG_SYS_I2C_SLAVE            0x7F
 235 #define CONFIG_SYS_I2C_NOPROBES         { {0, 0x29} }
 236 #define CONFIG_SYS_I2C_OFFSET           0x3000
 237 #define CONFIG_SYS_I2C2_OFFSET          0x3100
 238
 239 /*
 240  * I2C2 EEPROM
 241  */
 242 #define CONFIG_ID_EEPROM
 243 #ifdef CONFIG_ID_EEPROM
 244 #define CONFIG_SYS_I2C_EEPROM_NXID
 245 #endif
 246 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 247 #define CONFIG_SYS_I2C_EEPROM_ADDR2     0x18
 248 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 249 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 250 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10 /* and takes up to 10 msec */
 251
 252 /*
 253  * eSPI - Enhanced SPI
 254  */
 255 #define CONFIG_FSL_ESPI
 256 #define CONFIG_SPI_FLASH
 257 #define CONFIG_SPI_FLASH_STMICRO
 258 #define CONFIG_CMD_SF
 259 #define CONFIG_SF_DEFAULT_SPEED         10000000
 260 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 261
 262 /*
 263  * General PCI
 264  * Memory space is mapped 1-1, but I/O space must start from 0.
 265  */
 266 #if defined(CONFIG_PCI)
 267
 268 /* controller 3, Slot 3, tgtid 3, Base address 8000 */
 269 #define CONFIG_SYS_PCIE3_MEM_VIRT       0x80000000
 270 #define CONFIG_SYS_PCIE3_MEM_BUS        0x80000000
 271 #define CONFIG_SYS_PCIE3_MEM_PHYS       0x80000000
 272 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000  /* 512M */
 273 #define CONFIG_SYS_PCIE3_IO_VIRT        0xffc10000
 274 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 275 #define CONFIG_SYS_PCIE3_IO_PHYS        0xffc10000
 276 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000  /* 64k */
 277
 278 /* controller 2, Slot 2, tgtid 2, Base address 9000 */
 279 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 280 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 281 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 282 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000  /* 512M */
 283 #define CONFIG_SYS_PCIE2_IO_VIRT        0xffc20000
 284 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 285 #define CONFIG_SYS_PCIE2_IO_PHYS        0xffc20000
 286 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000  /* 64k */
 287
 288 /* controller 1, Slot 1, tgtid 1, Base address a000 */
 289 #define CONFIG_SYS_PCIE1_MEM_VIRT       0xc0000000
 290 #define CONFIG_SYS_PCIE1_MEM_BUS        0xc0000000
 291 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc0000000
 292 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000  /* 512M */
 293 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc30000
 294 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 295 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc30000
 296 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000  /* 64k */
 297
 298 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 299
 300 #undef CONFIG_EEPRO100
 301 #undef CONFIG_TULIP
 302 #undef CONFIG_RTL8139
 303
 304 #ifdef CONFIG_RTL8139
 305 /* This macro is used by RTL8139 but not defined in PPC architecture */
 306 #define KSEG1ADDR(x)            (x)
 307 #define _IO_BASE                0x00000000
 308 #endif
 309
 310 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 311 #define CONFIG_DOS_PARTITION
 312
 313 #endif  /* CONFIG_PCI */
 314
 315 #if defined(CONFIG_TSEC_ENET)
 316 #define CONFIG_MII              1       /* MII PHY management */
 317 #define CONFIG_MII_DEFAULT_TSEC 1       /* Allow unregistered phys */
 318 #define CONFIG_TSEC1            1
 319 #define CONFIG_TSEC1_NAME       "eTSEC1"
 320 #define CONFIG_TSEC2            1
 321 #define CONFIG_TSEC2_NAME       "eTSEC2"
 322 #define CONFIG_TSEC3            1
 323 #define CONFIG_TSEC3_NAME       "eTSEC3"
 324
 325 #define TSEC1_PHY_ADDR          0
 326 #define TSEC2_PHY_ADDR          2
 327 #define TSEC3_PHY_ADDR          1
 328
 329 #undef CONFIG_VSC7385_ENET
 330
 331 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 332 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 333 #define TSEC3_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 334
 335 #define TSEC1_PHYIDX            0
 336 #define TSEC2_PHYIDX            0
 337 #define TSEC3_PHYIDX            0
 338
 339 #define CONFIG_ETHPRIME         "eTSEC1"
 340
 341 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
 342
 343 #endif  /* CONFIG_TSEC_ENET */
 344
 345 /*
 346  * Environment
 347  */
 348 #if defined(CONFIG_RAMBOOT_SDCARD)
 349         #define CONFIG_ENV_IS_IN_MMC    1
 350         #define CONFIG_FSL_FIXED_MMC_LOCATION
 351         #define CONFIG_ENV_SIZE         0x2000
 352         #define CONFIG_SYS_MMC_ENV_DEV  0
 353 #elif defined(CONFIG_RAMBOOT_SPIFLASH)
 354         #define CONFIG_ENV_IS_IN_SPI_FLASH
 355         #define CONFIG_ENV_SPI_BUS      0
 356         #define CONFIG_ENV_SPI_CS       0
 357         #define CONFIG_ENV_SPI_MAX_HZ   10000000
 358         #define CONFIG_ENV_SPI_MODE     0
 359         #define CONFIG_ENV_OFFSET       0x100000        /* 1MB */
 360         #define CONFIG_ENV_SECT_SIZE    0x10000
 361         #define CONFIG_ENV_SIZE         0x2000
 362 #endif
 363
 364 #define CONFIG_LOADS_ECHO               1
 365 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1
 366
 367 /*
 368  * Command line configuration.
 369  */
 370 #include <config_cmd_default.h>
 371
 372 #define CONFIG_CMD_ELF
 373 #define CONFIG_CMD_I2C
 374 #define CONFIG_CMD_IRQ
 375 #define CONFIG_CMD_MII
 376 #define CONFIG_CMD_PING
 377 #define CONFIG_CMD_SETEXPR
 378 #define CONFIG_CMD_REGINFO
 379
 380 #if defined(CONFIG_PCI)
 381 #define CONFIG_CMD_NET
 382 #define CONFIG_CMD_PCI
 383 #endif
 384
 385 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 386
 387 #define CONFIG_MMC      1
 388
 389 #ifdef CONFIG_MMC
 390 #define CONFIG_BOARD_EARLY_INIT_F       1       /* Call board_pre_init */
 391 #define CONFIG_CMD_MMC
 392 #define CONFIG_DOS_PARTITION
 393 #define CONFIG_FSL_ESDHC
 394 #define CONFIG_GENERIC_MMC
 395 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 396 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 397 #endif /* CONFIG_MMC */
 398
 399 #define CONFIG_HAS_FSL_DR_USB
 400 #ifdef CONFIG_HAS_FSL_DR_USB
 401 #define CONFIG_USB_EHCI
 402
 403 #ifdef CONFIG_USB_EHCI
 404 #define CONFIG_CMD_USB
 405 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 406 #define CONFIG_USB_EHCI_FSL
 407 #define CONFIG_USB_STORAGE
 408 #endif
 409 #endif
 410
 411 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
 412 #define CONFIG_CMD_EXT2
 413 #define CONFIG_CMD_FAT
 414 #define CONFIG_DOS_PARTITION
 415 #endif
 416
 417 /* Misc Extra Settings */
 418 #define CONFIG_CMD_DHCP                 1
 419
 420 #define CONFIG_CMD_DATE                 1
 421 #define CONFIG_RTC_M41T62               1
 422 #define CONFIG_SYS_RTC_BUS_NUM          1
 423 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 424
 425 /*
 426  * Miscellaneous configurable options
 427  */
 428 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 429 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 430 #define CONFIG_AUTO_COMPLETE    1               /* add autocompletion support */
 431 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 432 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 433 #if defined(CONFIG_CMD_KGDB)
 434 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 435 #else
 436 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 437 #endif
 438 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 439                                                 /* Print Buffer Size */
 440 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 441 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 442 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1ms tick */
 443
 444 /*
 445  * For booting Linux, the board info and command line data
 446  * have to be in the first 64 MB of memory, since this is
 447  * the maximum mapped by the Linux kernel during initialization.
 448  */
 449 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)
 450 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)
 451
 452 #if defined(CONFIG_CMD_KGDB)
 453 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 454 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 455 #endif
 456
 457 /*
 458  * Environment Configuration
 459  */
 460
 461 /* The mac addresses for all ethernet interface */
 462 #if defined(CONFIG_TSEC_ENET)
 463 #define CONFIG_HAS_ETH0
 464 #define CONFIG_HAS_ETH1
 465 #define CONFIG_HAS_ETH2
 466 #define CONFIG_HAS_ETH3
 467 #endif
 468
 469 #define CONFIG_HOSTNAME         unknown
 470 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 471 #define CONFIG_BOOTFILE         "uImage"
 472 #define CONFIG_UBOOTPATH        u-boot.bin
 473
 474 /* default location for tftp and bootm */
 475 #define CONFIG_LOADADDR         1000000
 476
 477 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 478 #undef  CONFIG_BOOTARGS                 /* the boot command will set bootargs */
 479
 480 #define CONFIG_BAUDRATE         115200
 481
 482 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 483         "hwconfig=fsl_ddr:ecc=on\0"                                     \
 484         "bootcmd=run sdboot\0"                                          \
 485         "sdboot=setenv bootargs root=/dev/mmcblk0p2 rw "                \
 486                 "rootdelay=$rootdelaysecond console=$consoledev,$baudrate "\
 487                 "$othbootargs; mmcinfo; "                               \
 488                 "ext2load mmc 0:2 $loadaddr /boot/$bootfile; "          \
 489                 "ext2load mmc 0:2 $fdtaddr /boot/$fdtfile; "            \
 490                 "bootm $loadaddr - $fdtaddr\0"                          \
 491         "sdfatboot=setenv bootargs root=/dev/ram rw "                   \
 492                 "rootdelay=$rootdelaysecond console=$consoledev,$baudrate "\
 493                 "$othbootargs; mmcinfo; "                               \
 494                 "fatload mmc 0:1 $loadaddr $bootfile; "                 \
 495                 "fatload mmc 0:1 $fdtaddr $fdtfile; "                   \
 496                 "fatload mmc 0:1 $ramdiskaddr $ramdiskfile; "           \
 497                 "bootm $loadaddr $ramdiskaddr $fdtaddr\0"               \
 498         "usbboot=setenv bootargs root=/dev/sda1 rw "                    \
 499                 "rootdelay=$rootdelaysecond console=$consoledev,$baudrate "\
 500                 "$othbootargs; "                                        \
 501                 "usb start; "                                           \
 502                 "ext2load usb 0:1 $loadaddr /boot/$bootfile; "          \
 503                 "ext2load usb 0:1 $fdtaddr /boot/$fdtfile; "            \
 504                 "bootm $loadaddr - $fdtaddr\0"                          \
 505         "usbfatboot=setenv bootargs root=/dev/ram rw "                  \
 506                 "console=$consoledev,$baudrate $othbootargs; "          \
 507                 "usb start; "                                           \
 508                 "fatload usb 0:2 $loadaddr $bootfile; "                 \
 509                 "fatload usb 0:2 $fdtaddr $fdtfile; "                   \
 510                 "fatload usb 0:2 $ramdiskaddr $ramdiskfile; "           \
 511                 "bootm $loadaddr $ramdiskaddr $fdtaddr\0"               \
 512         "usbext2boot=setenv bootargs root=/dev/ram rw "                 \
 513                 "console=$consoledev,$baudrate $othbootargs; "          \
 514                 "usb start; "                                           \
 515                 "ext2load usb 0:4 $loadaddr $bootfile; "                \
 516                 "ext2load usb 0:4 $fdtaddr $fdtfile; "                  \
 517                 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile; "          \
 518                 "bootm $loadaddr $ramdiskaddr $fdtaddr\0"               \
 519         "upgradespi=sf probe 0; "                                       \
 520                 "setenv startaddr 0; "                                  \
 521                 "setenv erasesize a0000; "                              \
 522                 "tftp 1000000 $tftppath/$uboot_spi; "                   \
 523                 "sf erase $startaddr $erasesize; "                      \
 524                 "sf write 1000000 $startaddr $filesize; "               \
 525                 "sf erase 100000 120000\0"                              \
 526         "clearspienv=sf probe 0;sf erase 100000 20000\0"                \
 527         "othbootargs=ramdisk_size=700000 cache-sram-size=0x10000\0"     \
 528         "netdev=eth0\0"                                                 \
 529         "rootdelaysecond=15\0"                                          \
 530         "uboot_nor=u-boot-nor.bin\0"                                    \
 531         "uboot_spi=u-boot-p2020.spi\0"                                  \
 532         "uboot_sd=u-boot-p2020.bin\0"                                   \
 533         "consoledev=ttyS0\0"                                            \
 534         "ramdiskaddr=2000000\0"                                         \
 535         "ramdiskfile=rootfs-dev.ext2.img\0"                             \
 536         "fdtaddr=c00000\0"                                              \
 537         "fdtfile=uImage-2.6.32-p2020.dtb\0"                             \
 538         "tftppath=p2020\0"
 539
 540 #define CONFIG_HDBOOT                                                   \
 541         "setenv bootargs root=/dev/$bdev rw rootdelay=30 "              \
 542         "console=$consoledev,$baudrate $othbootargs;"                   \
 543         "usb start;"                                                    \
 544         "ext2load usb 0:1 $loadaddr /boot/$bootfile;"                   \
 545         "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;"                     \
 546         "bootm $loadaddr - $fdtaddr"
 547
 548 #define CONFIG_NFSBOOTCOMMAND                                           \
 549         "setenv bootargs root=/dev/nfs rw "                             \
 550         "nfsroot=$serverip:$rootpath "                                  \
 551         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off "\
 552         "console=$consoledev,$baudrate $othbootargs;"                   \
 553         "tftp $loadaddr $tftppath/$bootfile;"                           \
 554         "tftp $fdtaddr $tftppath/$fdtfile;"                             \
 555         "bootm $loadaddr - $fdtaddr"
 556
 557
 558 #define CONFIG_RAMBOOTCOMMAND                                           \
 559         "setenv bootargs root=/dev/ram rw "                             \
 560         "console=$consoledev,$baudrate $othbootargs;"                   \
 561         "tftp $ramdiskaddr $tftppath/$ramdiskfile;"                     \
 562         "tftp $loadaddr $tftppath/$bootfile;"                           \
 563         "tftp $fdtaddr $tftppath/$fdtfile;"                             \
 564         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 565
 566 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
 567
 568 #endif  /* __CONFIG_H */