include/configs/T1042RDB_PI.h

   1 /*
   2  * Copyright 2013 Freescale Semiconductor, Inc.
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22
  23 #ifndef __CONFIG_H
  24 #define __CONFIG_H
  25
  26 /*
  27  * T1042RDB_PI board configuration file
  28  */
  29 #define CONFIG_T104xRDB
  30 #define CONFIG_T1042RDB_PI
  31 #define CONFIG_PHYS_64BIT
  32
  33 #ifdef CONFIG_RAMBOOT_PBL
  34 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  35 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  36 #endif
  37
  38 /* High Level Configuration Options */
  39 #define CONFIG_BOOKE
  40 #define CONFIG_E500                     /* BOOKE e500 family */
  41 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  42 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  43 #define CONFIG_MP                       /* support multiple processors */
  44
  45 #ifndef CONFIG_SYS_TEXT_BASE
  46 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  47 #endif
  48
  49 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  50 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  51 #endif
  52
  53 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  54 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  55 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  56 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  57 #define CONFIG_PCI_INDIRECT_BRIDGE
  58 #define CONFIG_PCIE1                    /* PCIE controler 1 */
  59 #define CONFIG_PCIE2                    /* PCIE controler 2 */
  60 #define CONFIG_PCIE3                    /* PCIE controler 3 */
  61 #define CONFIG_PCIE4                    /* PCIE controler 4 */
  62
  63 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  64 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  65
  66 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  67
  68 #define CONFIG_ENV_OVERWRITE
  69
  70 #ifdef CONFIG_SYS_NO_FLASH
  71 #define CONFIG_ENV_IS_NOWHERE
  72 #else
  73 #define CONFIG_FLASH_CFI_DRIVER
  74 #define CONFIG_SYS_FLASH_CFI
  75 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  76 #endif
  77
  78 #ifndef CONFIG_SYS_NO_FLASH
  79 #if defined(CONFIG_SPIFLASH)
  80 #define CONFIG_SYS_EXTRA_ENV_RELOC
  81 #define CONFIG_ENV_IS_IN_SPI_FLASH
  82 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
  83 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
  84 #define CONFIG_ENV_SECT_SIZE            0x10000
  85 #elif defined(CONFIG_SDCARD)
  86 #define CONFIG_SYS_EXTRA_ENV_RELOC
  87 #define CONFIG_ENV_IS_IN_MMC
  88 #define CONFIG_SYS_MMC_ENV_DEV          0
  89 #define CONFIG_ENV_SIZE                 0x2000
  90 #define CONFIG_ENV_OFFSET               (512 * 1658)
  91 #elif defined(CONFIG_NAND)
  92 #define CONFIG_SYS_EXTRA_ENV_RELOC
  93 #define CONFIG_ENV_IS_IN_NAND
  94 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
  95 #define CONFIG_ENV_OFFSET               (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
  96 #else
  97 #define CONFIG_ENV_IS_IN_FLASH
  98 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
  99 #define CONFIG_ENV_SIZE         0x2000
 100 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 101 #endif
 102 #else /* CONFIG_SYS_NO_FLASH */
 103 #define CONFIG_ENV_SIZE                0x2000
 104 #define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
 105 #endif
 106
 107 #define CONFIG_SYS_CLK_FREQ     100000000
 108 #define CONFIG_DDR_CLK_FREQ     66666666
 109
 110 /*
 111  * These can be toggled for performance analysis, otherwise use default.
 112  */
 113 #define CONFIG_SYS_CACHE_STASHING
 114 #define CONFIG_BACKSIDE_L2_CACHE
 115 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 116 #define CONFIG_BTB                      /* toggle branch predition */
 117 #define CONFIG_DDR_ECC
 118 #ifdef CONFIG_DDR_ECC
 119 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 120 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 121 #endif
 122
 123 #define CONFIG_ENABLE_36BIT_PHYS
 124
 125 #define CONFIG_ADDR_MAP
 126 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 127
 128 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 129 #define CONFIG_SYS_MEMTEST_END          0x00400000
 130 #define CONFIG_SYS_ALT_MEMTEST
 131 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 132
 133 /*
 134  *  Config the L3 Cache as L3 SRAM
 135  */
 136 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 137
 138 #define CONFIG_SYS_DCSRBAR              0xf0000000
 139 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 140
 141 /*
 142  * DDR Setup
 143  */
 144 #define CONFIG_VERY_BIG_RAM
 145 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 146 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 147
 148 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 149 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 150 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 151
 152 #define CONFIG_DDR_SPD
 153 #define CONFIG_SYS_DDR_RAW_TIMING
 154 #define CONFIG_SYS_FSL_DDR3
 155
 156 #define CONFIG_SYS_SPD_BUS_NUM  0
 157 #define SPD_EEPROM_ADDRESS      0x51
 158
 159 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 160
 161 /*
 162  * IFC Definitions
 163  */
 164 #define CONFIG_SYS_FLASH_BASE   0xe8000000
 165 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 166
 167 #define CONFIG_SYS_NOR_CSPR_EXT (0xf)
 168 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) | \
 169                                 CSPR_PORT_SIZE_16 | \
 170                                 CSPR_MSEL_NOR | \
 171                                 CSPR_V)
 172 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 173 /* NOR Flash Timing Params */
 174 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 175 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 176                                 FTIM0_NOR_TEADC(0x5) | \
 177                                 FTIM0_NOR_TEAHC(0x5))
 178 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 179                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 180                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 181 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 182                                 FTIM2_NOR_TCH(0x4) | \
 183                                 FTIM2_NOR_TWPH(0x0E) | \
 184                                 FTIM2_NOR_TWP(0x1c))
 185 #define CONFIG_SYS_NOR_FTIM3    0x0
 186
 187 #define CONFIG_SYS_FLASH_QUIET_TEST
 188 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 189
 190 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 191 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 192 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 193 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 194
 195 #define CONFIG_SYS_FLASH_EMPTY_INFO
 196 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 197
 198 /* CPLD on IFC */
 199 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 200 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 201 #define CONFIG_SYS_CSPR2_EXT    (0xf)
 202 #define CONFIG_SYS_CSPR2        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 203                                 | CSPR_PORT_SIZE_8 \
 204                                 | CSPR_MSEL_GPCM \
 205                                 | CSPR_V)
 206 #define CONFIG_SYS_AMASK2       IFC_AMASK(64*1024)
 207 #define CONFIG_SYS_CSOR2        0x0
 208 /* CPLD Timing parameters for IFC CS2 */
 209 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 210                                         FTIM0_GPCM_TEADC(0x0e) | \
 211                                         FTIM0_GPCM_TEAHC(0x0e))
 212 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 213                                         FTIM1_GPCM_TRAD(0x1f))
 214 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 215                                         FTIM2_GPCM_TCH(0x0) | \
 216                                         FTIM2_GPCM_TWP(0x1f))
 217 #define CONFIG_SYS_CS2_FTIM3            0x0
 218
 219 /* NAND Flash on IFC */
 220 #define CONFIG_NAND_FSL_IFC
 221 #define CONFIG_SYS_NAND_BASE            0xff800000
 222 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 223
 224 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 225 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 226                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 227                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 228                                 | CSPR_V)
 229 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 230
 231 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 232                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 233                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 234                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 235                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 236                                 | CSOR_NAND_SPRZ_224/* Spare size = 224 */ \
 237                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 238
 239 #define CONFIG_SYS_NAND_ONFI_DETECTION
 240
 241 /* ONFI NAND Flash mode0 Timing Params */
 242 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 243                                         FTIM0_NAND_TWP(0x18)   | \
 244                                         FTIM0_NAND_TWCHT(0x07) | \
 245                                         FTIM0_NAND_TWH(0x0a))
 246 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 247                                         FTIM1_NAND_TWBE(0x39)  | \
 248                                         FTIM1_NAND_TRR(0x0e)   | \
 249                                         FTIM1_NAND_TRP(0x18))
 250 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 251                                         FTIM2_NAND_TREH(0x0a) | \
 252                                         FTIM2_NAND_TWHRE(0x1e))
 253 #define CONFIG_SYS_NAND_FTIM3           0x0
 254
 255 #define CONFIG_SYS_NAND_DDR_LAW         11
 256 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 257 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 258 #define CONFIG_MTD_NAND_VERIFY_WRITE
 259 #define CONFIG_CMD_NAND
 260
 261 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 262
 263 #if defined(CONFIG_NAND)
 264 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 265 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 266 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 267 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 268 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 269 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 270 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 271 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 272 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR_CSPR_EXT
 273 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 274 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 275 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 276 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 277 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 278 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 279 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 280 #else
 281 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR_CSPR_EXT
 282 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 283 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 284 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 285 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 286 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 287 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 288 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 289 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 290 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 291 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 292 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 293 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 294 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 295 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 296 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 297 #endif
 298
 299 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 300
 301 #if defined(CONFIG_RAMBOOT_PBL)
 302 #define CONFIG_SYS_RAMBOOT
 303 #endif
 304
 305 #define CONFIG_BOARD_EARLY_INIT_R
 306 #define CONFIG_MISC_INIT_R
 307
 308 #define CONFIG_HWCONFIG
 309
 310 /* define to use L1 as initial stack */
 311 #define CONFIG_L1_INIT_RAM
 312 #define CONFIG_SYS_INIT_RAM_LOCK
 313 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 314 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 315 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe0ec000
 316 /* The assembler doesn't like typecast */
 317 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 318         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 319           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 320 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 321
 322 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 323                                         GENERATED_GBL_DATA_SIZE)
 324 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 325
 326 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 327 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 328
 329 /* Serial Port - controlled on board with jumper J8
 330  * open - index 2
 331  * shorted - index 1
 332  */
 333 #define CONFIG_CONS_INDEX       1
 334 #define CONFIG_SYS_NS16550
 335 #define CONFIG_SYS_NS16550_SERIAL
 336 #define CONFIG_SYS_NS16550_REG_SIZE     1
 337 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 338
 339 #define CONFIG_SYS_BAUDRATE_TABLE       \
 340         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 341
 342 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 343 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 344 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 345 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 346 #define CONFIG_SERIAL_MULTI             /* Enable both serial ports */
 347 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 348
 349 /* Use the HUSH parser */
 350 #define CONFIG_SYS_HUSH_PARSER
 351 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 352
 353 /* pass open firmware flat tree */
 354 #define CONFIG_OF_LIBFDT
 355 #define CONFIG_OF_BOARD_SETUP
 356 #define CONFIG_OF_STDOUT_VIA_ALIAS
 357
 358 /* new uImage format support */
 359 #define CONFIG_FIT
 360 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 361
 362 /* I2C */
 363 #define CONFIG_SYS_I2C
 364 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 365 #define CONFIG_SYS_FSL_I2C_SPEED        400000  /* I2C speed in Hz */
 366 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 367 #define CONFIG_SYS_FSL_I2C2_SPEED       400000  /* I2C speed in Hz */
 368 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 369 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 370 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x119000
 371
 372 /* I2C bus multiplexer */
 373 #define I2C_MUX_PCA_ADDR                0x70
 374
 375 /*
 376  * RTC configuration
 377  */
 378 #define RTC
 379 #define CONFIG_RTC_DS1337               1
 380 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 381
 382 /*DVI encoder*/
 383 #define CONFIG_HDMI_ENCODER_I2C_ADDR  0x75
 384
 385 /*
 386  * eSPI - Enhanced SPI
 387  */
 388 #define CONFIG_FSL_ESPI
 389 #define CONFIG_SPI_FLASH
 390 #define CONFIG_SPI_FLASH_STMICRO
 391 #define CONFIG_CMD_SF
 392 #define CONFIG_SF_DEFAULT_SPEED         10000000
 393 #define CONFIG_SF_DEFAULT_MODE          0
 394 #define CONFIG_ENV_SPI_BUS              0
 395 #define CONFIG_ENV_SPI_CS               0
 396 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 397 #define CONFIG_ENV_SPI_MODE             0
 398
 399 /*
 400  * General PCI
 401  * Memory space is mapped 1-1, but I/O space must start from 0.
 402  */
 403
 404 #ifdef CONFIG_PCI
 405 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 406 #ifdef CONFIG_PCIE1
 407 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 408 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 409 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 410 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 411 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 412 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 413 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 414 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 415 #endif
 416
 417 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 418 #ifdef CONFIG_PCIE2
 419 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 420 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 421 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 422 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 423 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 424 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 425 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 426 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 427 #endif
 428
 429 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 430 #ifdef CONFIG_PCIE3
 431 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 432 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 433 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 434 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 435 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 436 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 437 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 438 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 439 #endif
 440
 441 /* controller 4, Base address 203000 */
 442 #ifdef CONFIG_PCIE4
 443 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 444 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 445 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 446 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 447 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 448 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 449 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 450 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 451 #endif
 452
 453 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 454 #define CONFIG_E1000
 455
 456 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 457 #define CONFIG_DOS_PARTITION
 458 #endif  /* CONFIG_PCI */
 459
 460 /* SATA */
 461 #define CONFIG_FSL_SATA_V2
 462 #ifdef CONFIG_FSL_SATA_V2
 463 #define CONFIG_LIBATA
 464 #define CONFIG_FSL_SATA
 465
 466 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 467 #define CONFIG_SATA1
 468 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 469 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 470
 471 #define CONFIG_LBA48
 472 #define CONFIG_CMD_SATA
 473 #define CONFIG_DOS_PARTITION
 474 #define CONFIG_CMD_EXT2
 475 #endif
 476
 477 /*
 478 * USB
 479 */
 480 #define CONFIG_HAS_FSL_DR_USB
 481
 482 #ifdef CONFIG_HAS_FSL_DR_USB
 483 #define CONFIG_USB_EHCI
 484
 485 #ifdef CONFIG_USB_EHCI
 486 #define CONFIG_CMD_USB
 487 #define CONFIG_USB_STORAGE
 488 #define CONFIG_USB_EHCI_FSL
 489 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 490 #define CONFIG_CMD_EXT2
 491 #endif
 492 #endif
 493
 494 #define CONFIG_MMC
 495
 496 #ifdef CONFIG_MMC
 497 #define CONFIG_FSL_ESDHC
 498 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 499 #define CONFIG_CMD_MMC
 500 #define CONFIG_GENERIC_MMC
 501 #define CONFIG_CMD_EXT2
 502 #define CONFIG_CMD_FAT
 503 #define CONFIG_DOS_PARTITION
 504 #endif
 505
 506 /* Qman/Bman */
 507 #ifndef CONFIG_NOBQFMAN
 508 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 509 #define CONFIG_SYS_BMAN_NUM_PORTALS     25
 510 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 511 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 512 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 513 #define CONFIG_SYS_QMAN_NUM_PORTALS     25
 514 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 515 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 516 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 517
 518 #define CONFIG_SYS_DPAA_FMAN
 519 #define CONFIG_SYS_DPAA_PME
 520
 521 /* Default address of microcode for the Linux Fman driver */
 522 #if defined(CONFIG_SPIFLASH)
 523 /*
 524  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 525  * env, so we got 0x110000.
 526  */
 527 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 528 #define CONFIG_SYS_QE_FMAN_FW_ADDR      0x110000
 529 #elif defined(CONFIG_SDCARD)
 530 /*
 531  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 532  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
 533  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
 534  */
 535 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 536 #define CONFIG_SYS_QE_FMAN_FW_ADDR      (512 * 1680)
 537 #elif defined(CONFIG_NAND)
 538 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 539 #define CONFIG_SYS_QE_FMAN_FW_ADDR      (4 * CONFIG_SYS_NAND_BLOCK_SIZE)
 540 #else
 541 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 542 #define CONFIG_SYS_QE_FMAN_FW_ADDR              0xEFF00000
 543 #endif
 544 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 545 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 546 #endif /* CONFIG_NOBQFMAN */
 547
 548 #ifdef CONFIG_SYS_DPAA_FMAN
 549 #define CONFIG_FMAN_ENET
 550 #define CONFIG_PHY_VITESSE
 551 #define CONFIG_PHY_REALTEK
 552 #endif
 553
 554 #ifdef CONFIG_FMAN_ENET
 555 #define CONFIG_SYS_RGMII1_PHY_ADDR              0x01
 556 #define CONFIG_SYS_RGMII2_PHY_ADDR              0x02
 557
 558 #define CONFIG_MII              /* MII PHY management */
 559 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 560 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 561 #endif
 562
 563 /*
 564  * Environment
 565  */
 566 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 567 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 568
 569 /*
 570  * Command line configuration.
 571  */
 572 #include <config_cmd_default.h>
 573
 574 #define CONFIG_CMD_DATE
 575 #define CONFIG_CMD_DHCP
 576 #define CONFIG_CMD_ELF
 577 #define CONFIG_CMD_ERRATA
 578 #define CONFIG_CMD_GREPENV
 579 #define CONFIG_CMD_IRQ
 580 #define CONFIG_CMD_I2C
 581 #define CONFIG_CMD_MII
 582 #define CONFIG_CMD_PING
 583 #define CONFIG_CMD_REGINFO
 584 #define CONFIG_CMD_SETEXPR
 585
 586 #ifdef CONFIG_PCI
 587 #define CONFIG_CMD_PCI
 588 #define CONFIG_CMD_NET
 589 #endif
 590
 591 /*
 592  * Miscellaneous configurable options
 593  */
 594 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 595 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 596 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 597 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 598 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 599 #ifdef CONFIG_CMD_KGDB
 600 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 601 #else
 602 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 603 #endif
 604 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 605 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 606 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 607
 608 /*
 609  * For booting Linux, the board info and command line data
 610  * have to be in the first 64 MB of memory, since this is
 611  * the maximum mapped by the Linux kernel during initialization.
 612  */
 613 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 614 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 615
 616 #ifdef CONFIG_CMD_KGDB
 617 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 618 #endif
 619
 620 /*
 621  * Environment Configuration
 622  */
 623 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 624 #define CONFIG_BOOTFILE         "uImage"
 625 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 626
 627 /* default location for tftp and bootm */
 628 #define CONFIG_LOADADDR         1000000
 629
 630 #define CONFIG_BOOTDELAY        10      /*-1 disables auto-boot*/
 631
 632 #define CONFIG_BAUDRATE 115200
 633
 634 #define __USB_PHY_TYPE  utmi
 635
 636 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 637         "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;"                  \
 638         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 639         "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 640         "netdev=eth0\0"                                         \
 641         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 642         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 643         "tftpflash=tftpboot $loadaddr $uboot && "               \
 644         "protect off $ubootaddr +$filesize && "                 \
 645         "erase $ubootaddr +$filesize && "                       \
 646         "cp.b $loadaddr $ubootaddr $filesize && "               \
 647         "protect on $ubootaddr +$filesize && "                  \
 648         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 649         "consoledev=ttyS0\0"                                    \
 650         "ramdiskaddr=2000000\0"                                 \
 651         "ramdiskfile=t1040rdb_pi/ramdisk.uboot\0"                       \
 652         "fdtaddr=c00000\0"                                      \
 653         "fdtfile=t1040rdb_pi/t1040rdb_pi.dtb\0"                         \
 654         "bdev=sda3\0"                                           \
 655         "c=ffe\0"
 656
 657 #define CONFIG_LINUX                       \
 658         "setenv bootargs root=/dev/ram rw "            \
 659         "console=$consoledev,$baudrate $othbootargs;"  \
 660         "setenv ramdiskaddr 0x02000000;"               \
 661         "setenv fdtaddr 0x00c00000;"                   \
 662         "setenv loadaddr 0x1000000;"                   \
 663         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 664
 665 #define CONFIG_HDBOOT                                   \
 666         "setenv bootargs root=/dev/$bdev rw "           \
 667         "console=$consoledev,$baudrate $othbootargs;"   \
 668         "tftp $loadaddr $bootfile;"                     \
 669         "tftp $fdtaddr $fdtfile;"                       \
 670         "bootm $loadaddr - $fdtaddr"
 671
 672 #define CONFIG_NFSBOOTCOMMAND                   \
 673         "setenv bootargs root=/dev/nfs rw "     \
 674         "nfsroot=$serverip:$rootpath "          \
 675         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 676         "console=$consoledev,$baudrate $othbootargs;"   \
 677         "tftp $loadaddr $bootfile;"             \
 678         "tftp $fdtaddr $fdtfile;"               \
 679         "bootm $loadaddr - $fdtaddr"
 680
 681 #define CONFIG_RAMBOOTCOMMAND                           \
 682         "setenv bootargs root=/dev/ram rw "             \
 683         "console=$consoledev,$baudrate $othbootargs;"   \
 684         "tftp $ramdiskaddr $ramdiskfile;"               \
 685         "tftp $loadaddr $bootfile;"                     \
 686         "tftp $fdtaddr $fdtfile;"                       \
 687         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 688
 689 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 690
 691 #ifdef CONFIG_SECURE_BOOT
 692 #include <asm/fsl_secure_boot.h>
 693 #endif
 694
 695 #endif  /* __CONFIG_H */