include/configs/T1042RDB_PI.h

   1 /*
   2  * Copyright 2013 Freescale Semiconductor, Inc.
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22
  23 #ifndef __CONFIG_H
  24 #define __CONFIG_H
  25
  26 /*
  27  * T1042RDB_PI board configuration file
  28  */
  29 #define CONFIG_T104xRDB
  30 #define CONFIG_T1042RDB_PI
  31 #define CONFIG_PHYS_64BIT
  32
  33 #ifdef CONFIG_RAMBOOT_PBL
  34 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  35 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  36 #endif
  37
  38 /* High Level Configuration Options */
  39 #define CONFIG_BOOKE
  40 #define CONFIG_E500                     /* BOOKE e500 family */
  41 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  42 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  43 #define CONFIG_MP                       /* support multiple processors */
  44
  45 #ifndef CONFIG_SYS_TEXT_BASE
  46 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  47 #endif
  48
  49 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  50 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  51 #endif
  52
  53 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  54 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  55 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  56 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  57 #define CONFIG_PCI_INDIRECT_BRIDGE
  58 #define CONFIG_PCIE1                    /* PCIE controler 1 */
  59 #define CONFIG_PCIE2                    /* PCIE controler 2 */
  60 #define CONFIG_PCIE3                    /* PCIE controler 3 */
  61 #define CONFIG_PCIE4                    /* PCIE controler 4 */
  62
  63 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  64 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  65
  66 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  67
  68 #define CONFIG_ENV_OVERWRITE
  69
  70 #ifdef CONFIG_SYS_NO_FLASH
  71 #define CONFIG_ENV_IS_NOWHERE
  72 #else
  73 #define CONFIG_FLASH_CFI_DRIVER
  74 #define CONFIG_SYS_FLASH_CFI
  75 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  76 #endif
  77
  78 #ifndef CONFIG_SYS_NO_FLASH
  79 #if defined(CONFIG_SPIFLASH)
  80 #define CONFIG_SYS_EXTRA_ENV_RELOC
  81 #define CONFIG_ENV_IS_IN_SPI_FLASH
  82 #define CONFIG_ENV_SPI_BUS              0
  83 #define CONFIG_ENV_SPI_CS               0
  84 #define CONFIG_ENV_SPI_MAX_HZ           10000000
  85 #define CONFIG_ENV_SPI_MODE             0
  86 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
  87 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
  88 #define CONFIG_ENV_SECT_SIZE            0x10000
  89 #elif defined(CONFIG_SDCARD)
  90 #define CONFIG_SYS_EXTRA_ENV_RELOC
  91 #define CONFIG_ENV_IS_IN_MMC
  92 #define CONFIG_SYS_MMC_ENV_DEV          0
  93 #define CONFIG_ENV_SIZE                 0x2000
  94 #define CONFIG_ENV_OFFSET               (512 * 1658)
  95 #elif defined(CONFIG_NAND)
  96 #define CONFIG_SYS_EXTRA_ENV_RELOC
  97 #define CONFIG_ENV_IS_IN_NAND
  98 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
  99 #define CONFIG_ENV_OFFSET               (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
 100 #else
 101 #define CONFIG_ENV_IS_IN_FLASH
 102 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 103 #define CONFIG_ENV_SIZE         0x2000
 104 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 105 #endif
 106 #else /* CONFIG_SYS_NO_FLASH */
 107 #define CONFIG_ENV_SIZE                0x2000
 108 #define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
 109 #endif
 110
 111 #define CONFIG_SYS_CLK_FREQ     100000000
 112 #define CONFIG_DDR_CLK_FREQ     66666666
 113
 114 /*
 115  * These can be toggled for performance analysis, otherwise use default.
 116  */
 117 #define CONFIG_SYS_CACHE_STASHING
 118 #define CONFIG_BACKSIDE_L2_CACHE
 119 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 120 #define CONFIG_BTB                      /* toggle branch predition */
 121 #define CONFIG_DDR_ECC
 122 #ifdef CONFIG_DDR_ECC
 123 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 124 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 125 #endif
 126
 127 #define CONFIG_ENABLE_36BIT_PHYS
 128
 129 #define CONFIG_ADDR_MAP
 130 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 131
 132 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 133 #define CONFIG_SYS_MEMTEST_END          0x00400000
 134 #define CONFIG_SYS_ALT_MEMTEST
 135 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 136
 137 /*
 138  *  Config the L3 Cache as L3 SRAM
 139  */
 140 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 141
 142 #define CONFIG_SYS_DCSRBAR              0xf0000000
 143 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 144
 145 /*
 146  * DDR Setup
 147  */
 148 #define CONFIG_VERY_BIG_RAM
 149 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 150 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 151
 152 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 153 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 154 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 155
 156 #define CONFIG_DDR_SPD
 157 #define CONFIG_SYS_DDR_RAW_TIMING
 158 #define CONFIG_SYS_FSL_DDR3
 159
 160 #define CONFIG_SYS_SPD_BUS_NUM  0
 161 #define SPD_EEPROM_ADDRESS      0x51
 162
 163 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 164
 165 /*
 166  * IFC Definitions
 167  */
 168 #define CONFIG_SYS_FLASH_BASE   0xe8000000
 169 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 170
 171 #define CONFIG_SYS_NOR_CSPR_EXT (0xf)
 172 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) | \
 173                                 CSPR_PORT_SIZE_16 | \
 174                                 CSPR_MSEL_NOR | \
 175                                 CSPR_V)
 176 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 177 /* NOR Flash Timing Params */
 178 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 179 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 180                                 FTIM0_NOR_TEADC(0x5) | \
 181                                 FTIM0_NOR_TEAHC(0x5))
 182 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 183                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 184                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 185 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 186                                 FTIM2_NOR_TCH(0x4) | \
 187                                 FTIM2_NOR_TWPH(0x0E) | \
 188                                 FTIM2_NOR_TWP(0x1c))
 189 #define CONFIG_SYS_NOR_FTIM3    0x0
 190
 191 #define CONFIG_SYS_FLASH_QUIET_TEST
 192 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 193
 194 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 195 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 196 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 197 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 198
 199 #define CONFIG_SYS_FLASH_EMPTY_INFO
 200 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 201
 202 /* CPLD on IFC */
 203 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 204 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 205 #define CONFIG_SYS_CSPR2        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 206                                 | CSPR_PORT_SIZE_8 \
 207                                 | CSPR_MSEL_GPCM \
 208                                 | CSPR_V)
 209 #define CONFIG_SYS_AMASK2       IFC_AMASK(64*1024)
 210 #define CONFIG_SYS_CSOR2        0x0
 211 /* CPLD Timing parameters for IFC CS2 */
 212 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 213                                         FTIM0_GPCM_TEADC(0x0e) | \
 214                                         FTIM0_GPCM_TEAHC(0x0e))
 215 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 216                                         FTIM1_GPCM_TRAD(0x1f))
 217 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 218                                         FTIM2_GPCM_TCH(0x0) | \
 219                                         FTIM2_GPCM_TWP(0x1f))
 220 #define CONFIG_SYS_CS2_FTIM3            0x0
 221
 222 /* NAND Flash on IFC */
 223 #define CONFIG_NAND_FSL_IFC
 224 #define CONFIG_SYS_NAND_BASE            0xff800000
 225 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 226
 227 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 228 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 229                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 230                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 231                                 | CSPR_V)
 232 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 233
 234 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 235                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 236                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 237                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 238                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 239                                 | CSOR_NAND_SPRZ_224/* Spare size = 224 */ \
 240                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 241
 242 #define CONFIG_SYS_NAND_ONFI_DETECTION
 243
 244 /* ONFI NAND Flash mode0 Timing Params */
 245 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 246                                         FTIM0_NAND_TWP(0x18)   | \
 247                                         FTIM0_NAND_TWCHT(0x07) | \
 248                                         FTIM0_NAND_TWH(0x0a))
 249 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 250                                         FTIM1_NAND_TWBE(0x39)  | \
 251                                         FTIM1_NAND_TRR(0x0e)   | \
 252                                         FTIM1_NAND_TRP(0x18))
 253 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 254                                         FTIM2_NAND_TREH(0x0a) | \
 255                                         FTIM2_NAND_TWHRE(0x1e))
 256 #define CONFIG_SYS_NAND_FTIM3           0x0
 257
 258 #define CONFIG_SYS_NAND_DDR_LAW         11
 259 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 260 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 261 #define CONFIG_MTD_NAND_VERIFY_WRITE
 262 #define CONFIG_CMD_NAND
 263
 264 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 265
 266 #if defined(CONFIG_NAND)
 267 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 268 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 269 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 270 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 271 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 272 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 273 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 274 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 275 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR_CSPR_EXT
 276 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 277 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 278 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 279 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 280 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 281 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 282 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 283 #else
 284 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR_CSPR_EXT
 285 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 286 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 287 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 288 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 289 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 290 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 291 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 292 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 293 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 294 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 295 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 296 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 297 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 298 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 299 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 300 #endif
 301
 302 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 303
 304 #if defined(CONFIG_RAMBOOT_PBL)
 305 #define CONFIG_SYS_RAMBOOT
 306 #endif
 307
 308 #define CONFIG_BOARD_EARLY_INIT_R
 309 #define CONFIG_MISC_INIT_R
 310
 311 #define CONFIG_HWCONFIG
 312
 313 /* define to use L1 as initial stack */
 314 #define CONFIG_L1_INIT_RAM
 315 #define CONFIG_SYS_INIT_RAM_LOCK
 316 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 317 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 318 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe0ec000
 319 /* The assembler doesn't like typecast */
 320 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 321         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 322           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 323 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 324
 325 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 326                                         GENERATED_GBL_DATA_SIZE)
 327 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 328
 329 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 330 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 331
 332 /* Serial Port - controlled on board with jumper J8
 333  * open - index 2
 334  * shorted - index 1
 335  */
 336 #define CONFIG_CONS_INDEX       1
 337 #define CONFIG_SYS_NS16550
 338 #define CONFIG_SYS_NS16550_SERIAL
 339 #define CONFIG_SYS_NS16550_REG_SIZE     1
 340 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 341
 342 #define CONFIG_SYS_BAUDRATE_TABLE       \
 343         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 344
 345 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 346 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 347 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 348 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 349 #define CONFIG_SERIAL_MULTI             /* Enable both serial ports */
 350 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 351
 352 /* Use the HUSH parser */
 353 #define CONFIG_SYS_HUSH_PARSER
 354 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 355
 356 /* pass open firmware flat tree */
 357 #define CONFIG_OF_LIBFDT
 358 #define CONFIG_OF_BOARD_SETUP
 359 #define CONFIG_OF_STDOUT_VIA_ALIAS
 360
 361 /* new uImage format support */
 362 #define CONFIG_FIT
 363 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 364
 365 /* I2C */
 366 #define CONFIG_SYS_I2C
 367 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 368 #define CONFIG_SYS_FSL_I2C_SPEED        400000  /* I2C speed in Hz */
 369 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 370 #define CONFIG_SYS_FSL_I2C2_SPEED       400000  /* I2C speed in Hz */
 371 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 372 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 373 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x119000
 374
 375 /* I2C bus multiplexer */
 376 #define I2C_MUX_PCA_ADDR                0x70
 377
 378 /*
 379  * RTC configuration
 380  */
 381 #define RTC
 382 #define CONFIG_RTC_DS1337               1
 383 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 384
 385 /*DVI encoder*/
 386 #define CONFIG_HDMI_ENCODER_I2C_ADDR  0x75
 387
 388 /*
 389  * eSPI - Enhanced SPI
 390  */
 391 #define CONFIG_FSL_ESPI
 392 #define CONFIG_SPI_FLASH
 393 #define CONFIG_SPI_FLASH_STMICRO
 394 #define CONFIG_CMD_SF
 395 #define CONFIG_SF_DEFAULT_SPEED         10000000
 396 #define CONFIG_SF_DEFAULT_MODE          0
 397
 398 /*
 399  * General PCI
 400  * Memory space is mapped 1-1, but I/O space must start from 0.
 401  */
 402
 403 #ifdef CONFIG_PCI
 404 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 405 #ifdef CONFIG_PCIE1
 406 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 407 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 408 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 409 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 410 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 411 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 412 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 413 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 414 #endif
 415
 416 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 417 #ifdef CONFIG_PCIE2
 418 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 419 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 420 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 421 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 422 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 423 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 424 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 425 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 426 #endif
 427
 428 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 429 #ifdef CONFIG_PCIE3
 430 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 431 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 432 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 433 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 434 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 435 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 436 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 437 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 438 #endif
 439
 440 /* controller 4, Base address 203000 */
 441 #ifdef CONFIG_PCIE4
 442 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 443 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 444 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 445 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 446 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 447 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 448 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 449 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 450 #endif
 451
 452 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 453 #define CONFIG_E1000
 454
 455 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 456 #define CONFIG_DOS_PARTITION
 457 #endif  /* CONFIG_PCI */
 458
 459 /* SATA */
 460 #define CONFIG_FSL_SATA_V2
 461 #ifdef CONFIG_FSL_SATA_V2
 462 #define CONFIG_LIBATA
 463 #define CONFIG_FSL_SATA
 464
 465 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 466 #define CONFIG_SATA1
 467 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 468 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 469
 470 #define CONFIG_LBA48
 471 #define CONFIG_CMD_SATA
 472 #define CONFIG_DOS_PARTITION
 473 #define CONFIG_CMD_EXT2
 474 #endif
 475
 476 /*
 477 * USB
 478 */
 479 #define CONFIG_HAS_FSL_DR_USB
 480
 481 #ifdef CONFIG_HAS_FSL_DR_USB
 482 #define CONFIG_USB_EHCI
 483
 484 #ifdef CONFIG_USB_EHCI
 485 #define CONFIG_CMD_USB
 486 #define CONFIG_USB_STORAGE
 487 #define CONFIG_USB_EHCI_FSL
 488 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 489 #define CONFIG_CMD_EXT2
 490 #endif
 491 #endif
 492
 493 #define CONFIG_MMC
 494
 495 #ifdef CONFIG_MMC
 496 #define CONFIG_FSL_ESDHC
 497 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 498 #define CONFIG_CMD_MMC
 499 #define CONFIG_GENERIC_MMC
 500 #define CONFIG_CMD_EXT2
 501 #define CONFIG_CMD_FAT
 502 #define CONFIG_DOS_PARTITION
 503 #endif
 504
 505 /* Qman/Bman */
 506 #ifndef CONFIG_NOBQFMAN
 507 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 508 #define CONFIG_SYS_BMAN_NUM_PORTALS     25
 509 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 510 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 511 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 512 #define CONFIG_SYS_QMAN_NUM_PORTALS     25
 513 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 514 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 515 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 516
 517 #define CONFIG_SYS_DPAA_FMAN
 518 #define CONFIG_SYS_DPAA_PME
 519
 520 /* Default address of microcode for the Linux Fman driver */
 521 #if defined(CONFIG_SPIFLASH)
 522 /*
 523  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 524  * env, so we got 0x110000.
 525  */
 526 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 527 #define CONFIG_SYS_QE_FMAN_FW_ADDR      0x110000
 528 #elif defined(CONFIG_SDCARD)
 529 /*
 530  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 531  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
 532  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
 533  */
 534 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 535 #define CONFIG_SYS_QE_FMAN_FW_ADDR      (512 * 1680)
 536 #elif defined(CONFIG_NAND)
 537 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 538 #define CONFIG_SYS_QE_FMAN_FW_ADDR      (4 * CONFIG_SYS_NAND_BLOCK_SIZE)
 539 #else
 540 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 541 #define CONFIG_SYS_QE_FMAN_FW_ADDR              0xEFF00000
 542 #endif
 543 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 544 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 545 #endif /* CONFIG_NOBQFMAN */
 546
 547 #ifdef CONFIG_SYS_DPAA_FMAN
 548 #define CONFIG_FMAN_ENET
 549 #define CONFIG_PHY_VITESSE
 550 #define CONFIG_PHY_REALTEK
 551 #endif
 552
 553 #ifdef CONFIG_FMAN_ENET
 554 #define CONFIG_MII              /* MII PHY management */
 555 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 556 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 557 #endif
 558
 559 /*
 560  * Environment
 561  */
 562 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 563 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 564
 565 /*
 566  * Command line configuration.
 567  */
 568 #include <config_cmd_default.h>
 569
 570 #define CONFIG_CMD_DATE
 571 #define CONFIG_CMD_DHCP
 572 #define CONFIG_CMD_ELF
 573 #define CONFIG_CMD_ERRATA
 574 #define CONFIG_CMD_GREPENV
 575 #define CONFIG_CMD_IRQ
 576 #define CONFIG_CMD_I2C
 577 #define CONFIG_CMD_MII
 578 #define CONFIG_CMD_PING
 579 #define CONFIG_CMD_REGINFO
 580 #define CONFIG_CMD_SETEXPR
 581
 582 #ifdef CONFIG_PCI
 583 #define CONFIG_CMD_PCI
 584 #define CONFIG_CMD_NET
 585 #endif
 586
 587 /*
 588  * Miscellaneous configurable options
 589  */
 590 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 591 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 592 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 593 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 594 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 595 #ifdef CONFIG_CMD_KGDB
 596 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 597 #else
 598 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 599 #endif
 600 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 601 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 602 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 603 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1ms ticks*/
 604
 605 /*
 606  * For booting Linux, the board info and command line data
 607  * have to be in the first 64 MB of memory, since this is
 608  * the maximum mapped by the Linux kernel during initialization.
 609  */
 610 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 611 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 612
 613 #ifdef CONFIG_CMD_KGDB
 614 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 615 #endif
 616
 617 /*
 618  * Environment Configuration
 619  */
 620 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 621 #define CONFIG_BOOTFILE         "uImage"
 622 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 623
 624 /* default location for tftp and bootm */
 625 #define CONFIG_LOADADDR         1000000
 626
 627 #define CONFIG_BOOTDELAY        10      /*-1 disables auto-boot*/
 628
 629 #define CONFIG_BAUDRATE 115200
 630
 631 #define __USB_PHY_TYPE  utmi
 632
 633 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 634         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 635         "bank_intlv=cs0_cs1;"                                   \
 636         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 637         "netdev=eth0\0"                                         \
 638         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 639         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 640         "tftpflash=tftpboot $loadaddr $uboot && "               \
 641         "protect off $ubootaddr +$filesize && "                 \
 642         "erase $ubootaddr +$filesize && "                       \
 643         "cp.b $loadaddr $ubootaddr $filesize && "               \
 644         "protect on $ubootaddr +$filesize && "                  \
 645         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 646         "consoledev=ttyS0\0"                                    \
 647         "ramdiskaddr=2000000\0"                                 \
 648         "ramdiskfile=t1040rdb_pi/ramdisk.uboot\0"                       \
 649         "fdtaddr=c00000\0"                                      \
 650         "fdtfile=t1040rdb_pi/t1040rdb_pi.dtb\0"                         \
 651         "bdev=sda3\0"                                           \
 652         "c=ffe\0"
 653
 654 #define CONFIG_LINUX                       \
 655         "setenv bootargs root=/dev/ram rw "            \
 656         "console=$consoledev,$baudrate $othbootargs;"  \
 657         "setenv ramdiskaddr 0x02000000;"               \
 658         "setenv fdtaddr 0x00c00000;"                   \
 659         "setenv loadaddr 0x1000000;"                   \
 660         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 661
 662 #define CONFIG_HDBOOT                                   \
 663         "setenv bootargs root=/dev/$bdev rw "           \
 664         "console=$consoledev,$baudrate $othbootargs;"   \
 665         "tftp $loadaddr $bootfile;"                     \
 666         "tftp $fdtaddr $fdtfile;"                       \
 667         "bootm $loadaddr - $fdtaddr"
 668
 669 #define CONFIG_NFSBOOTCOMMAND                   \
 670         "setenv bootargs root=/dev/nfs rw "     \
 671         "nfsroot=$serverip:$rootpath "          \
 672         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 673         "console=$consoledev,$baudrate $othbootargs;"   \
 674         "tftp $loadaddr $bootfile;"             \
 675         "tftp $fdtaddr $fdtfile;"               \
 676         "bootm $loadaddr - $fdtaddr"
 677
 678 #define CONFIG_RAMBOOTCOMMAND                           \
 679         "setenv bootargs root=/dev/ram rw "             \
 680         "console=$consoledev,$baudrate $othbootargs;"   \
 681         "tftp $ramdiskaddr $ramdiskfile;"               \
 682         "tftp $loadaddr $bootfile;"                     \
 683         "tftp $fdtaddr $fdtfile;"                       \
 684         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 685
 686 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 687
 688 #ifdef CONFIG_SECURE_BOOT
 689 #include <asm/fsl_secure_boot.h>
 690 #endif
 691
 692 #endif  /* __CONFIG_H */