include/configs/T104xRDB.h

   1 /*
   2 + * Copyright 2014 Freescale Semiconductor, Inc.
   3 + *
   4 + * SPDX-License-Identifier:     GPL-2.0+
   5 + */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /*
  11  * T104x RDB board configuration file
  12  */
  13 #define CONFIG_T104xRDB
  14 #define CONFIG_PHYS_64BIT
  15
  16 #ifdef CONFIG_RAMBOOT_PBL
  17 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi.cfg
  18 #ifdef CONFIG_T1040RDB
  19 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1040_rcw.cfg
  20 #endif
  21 #ifdef CONFIG_T1042RDB_PI
  22 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_rcw.cfg
  23 #endif
  24 #ifdef CONFIG_T1042RDB
  25 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_rcw.cfg
  26 #endif
  27
  28 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  29 #define CONFIG_SPL_ENV_SUPPORT
  30 #define CONFIG_SPL_SERIAL_SUPPORT
  31 #define CONFIG_SPL_FLUSH_IMAGE
  32 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  33 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  34 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  35 #define CONFIG_SPL_I2C_SUPPORT
  36 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
  37 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
  38 #define CONFIG_SYS_TEXT_BASE            0x30001000
  39 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  40 #define CONFIG_SPL_PAD_TO               0x40000
  41 #define CONFIG_SPL_MAX_SIZE             0x28000
  42 #ifdef CONFIG_SPL_BUILD
  43 #define CONFIG_SPL_SKIP_RELOCATE
  44 #define CONFIG_SPL_COMMON_INIT_DDR
  45 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  46 #define CONFIG_SYS_NO_FLASH
  47 #endif
  48 #define RESET_VECTOR_OFFSET             0x27FFC
  49 #define BOOT_PAGE_OFFSET                0x27000
  50
  51 #ifdef CONFIG_NAND
  52 #define CONFIG_SPL_NAND_SUPPORT
  53 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  54 #define CONFIG_SYS_NAND_U_BOOT_DST      0x30000000
  55 #define CONFIG_SYS_NAND_U_BOOT_START    0x30000000
  56 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  57 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  58 #define CONFIG_SPL_NAND_BOOT
  59 #endif
  60
  61 #ifdef CONFIG_SPIFLASH
  62 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  63 #define CONFIG_SPL_SPI_SUPPORT
  64 #define CONFIG_SPL_SPI_FLASH_SUPPORT
  65 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  66 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  67 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x30000000)
  68 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x30000000)
  69 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  70 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  71 #ifndef CONFIG_SPL_BUILD
  72 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  73 #endif
  74 #define CONFIG_SPL_SPI_BOOT
  75 #endif
  76
  77 #ifdef CONFIG_SDCARD
  78 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  79 #define CONFIG_SPL_MMC_SUPPORT
  80 #define CONFIG_SPL_MMC_MINIMAL
  81 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  82 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x30000000)
  83 #define CONFIG_SYS_MMC_U_BOOT_START     (0x30000000)
  84 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  85 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  86 #ifndef CONFIG_SPL_BUILD
  87 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  88 #endif
  89 #define CONFIG_SPL_MMC_BOOT
  90 #endif
  91
  92 #endif
  93
  94 /* High Level Configuration Options */
  95 #define CONFIG_BOOKE
  96 #define CONFIG_E500                     /* BOOKE e500 family */
  97 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  98 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  99 #define CONFIG_MP                       /* support multiple processors */
 100
 101 /* support deep sleep */
 102 #define CONFIG_DEEP_SLEEP
 103 #define CONFIG_SILENT_CONSOLE
 104
 105 #ifndef CONFIG_SYS_TEXT_BASE
 106 #define CONFIG_SYS_TEXT_BASE    0xeff40000
 107 #endif
 108
 109 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 110 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 111 #endif
 112
 113 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
 114 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
 115 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
 116 #define CONFIG_PCI                      /* Enable PCI/PCIE */
 117 #define CONFIG_PCI_INDIRECT_BRIDGE
 118 #define CONFIG_PCIE1                    /* PCIE controler 1 */
 119 #define CONFIG_PCIE2                    /* PCIE controler 2 */
 120 #define CONFIG_PCIE3                    /* PCIE controler 3 */
 121 #define CONFIG_PCIE4                    /* PCIE controler 4 */
 122
 123 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
 124 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
 125
 126 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
 127
 128 #define CONFIG_ENV_OVERWRITE
 129
 130 #ifndef CONFIG_SYS_NO_FLASH
 131 #define CONFIG_FLASH_CFI_DRIVER
 132 #define CONFIG_SYS_FLASH_CFI
 133 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 134 #endif
 135
 136 #if defined(CONFIG_SPIFLASH)
 137 #define CONFIG_SYS_EXTRA_ENV_RELOC
 138 #define CONFIG_ENV_IS_IN_SPI_FLASH
 139 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 140 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 141 #define CONFIG_ENV_SECT_SIZE            0x10000
 142 #elif defined(CONFIG_SDCARD)
 143 #define CONFIG_SYS_EXTRA_ENV_RELOC
 144 #define CONFIG_ENV_IS_IN_MMC
 145 #define CONFIG_SYS_MMC_ENV_DEV          0
 146 #define CONFIG_ENV_SIZE                 0x2000
 147 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 148 #elif defined(CONFIG_NAND)
 149 #define CONFIG_SYS_EXTRA_ENV_RELOC
 150 #define CONFIG_ENV_IS_IN_NAND
 151 #define CONFIG_ENV_SIZE                 0x2000
 152 #define CONFIG_ENV_OFFSET               (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
 153 #else
 154 #define CONFIG_ENV_IS_IN_FLASH
 155 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 156 #define CONFIG_ENV_SIZE         0x2000
 157 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 158 #endif
 159
 160 #define CONFIG_SYS_CLK_FREQ     100000000
 161 #define CONFIG_DDR_CLK_FREQ     66666666
 162
 163 /*
 164  * These can be toggled for performance analysis, otherwise use default.
 165  */
 166 #define CONFIG_SYS_CACHE_STASHING
 167 #define CONFIG_BACKSIDE_L2_CACHE
 168 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 169 #define CONFIG_BTB                      /* toggle branch predition */
 170 #define CONFIG_DDR_ECC
 171 #ifdef CONFIG_DDR_ECC
 172 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 173 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 174 #endif
 175
 176 #define CONFIG_ENABLE_36BIT_PHYS
 177
 178 #define CONFIG_ADDR_MAP
 179 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 180
 181 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 182 #define CONFIG_SYS_MEMTEST_END          0x00400000
 183 #define CONFIG_SYS_ALT_MEMTEST
 184 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 185
 186 /*
 187  *  Config the L3 Cache as L3 SRAM
 188  */
 189 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 190 #define CONFIG_SYS_L3_SIZE              256 << 10
 191 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 192 #ifdef CONFIG_RAMBOOT_PBL
 193 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 194 #endif
 195 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 196 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 197 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 198 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 199
 200 #define CONFIG_SYS_DCSRBAR              0xf0000000
 201 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 202
 203 /*
 204  * DDR Setup
 205  */
 206 #define CONFIG_VERY_BIG_RAM
 207 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 208 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 209
 210 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 211 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 212 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 213
 214 #define CONFIG_DDR_SPD
 215 #define CONFIG_SYS_DDR_RAW_TIMING
 216 #define CONFIG_SYS_FSL_DDR3
 217
 218 #define CONFIG_SYS_SPD_BUS_NUM  0
 219 #define SPD_EEPROM_ADDRESS      0x51
 220
 221 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 222
 223 /*
 224  * IFC Definitions
 225  */
 226 #define CONFIG_SYS_FLASH_BASE   0xe8000000
 227 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 228
 229 #define CONFIG_SYS_NOR_CSPR_EXT (0xf)
 230 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) | \
 231                                 CSPR_PORT_SIZE_16 | \
 232                                 CSPR_MSEL_NOR | \
 233                                 CSPR_V)
 234 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 235
 236 /*
 237  * TDM Definition
 238  */
 239 #define T1040_TDM_QUIRK_CCSR_BASE       0xfe000000
 240
 241 /* NOR Flash Timing Params */
 242 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 243 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 244                                 FTIM0_NOR_TEADC(0x5) | \
 245                                 FTIM0_NOR_TEAHC(0x5))
 246 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 247                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 248                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 249 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 250                                 FTIM2_NOR_TCH(0x4) | \
 251                                 FTIM2_NOR_TWPH(0x0E) | \
 252                                 FTIM2_NOR_TWP(0x1c))
 253 #define CONFIG_SYS_NOR_FTIM3    0x0
 254
 255 #define CONFIG_SYS_FLASH_QUIET_TEST
 256 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 257
 258 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 259 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 260 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 261 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 262
 263 #define CONFIG_SYS_FLASH_EMPTY_INFO
 264 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 265
 266 /* CPLD on IFC */
 267 #define CPLD_LBMAP_MASK                 0x3F
 268 #define CPLD_BANK_SEL_MASK              0x07
 269 #define CPLD_BANK_OVERRIDE              0x40
 270 #define CPLD_LBMAP_ALTBANK              0x44 /* BANK OR | BANK 4 */
 271 #define CPLD_LBMAP_DFLTBANK             0x40 /* BANK OR | BANK0 */
 272 #define CPLD_LBMAP_RESET                0xFF
 273 #define CPLD_LBMAP_SHIFT                0x03
 274 #ifdef CONFIG_T1042RDB_PI
 275 #define CPLD_DIU_SEL_DFP                0x80
 276 #endif
 277
 278 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 279 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 280 #define CONFIG_SYS_CSPR2_EXT    (0xf)
 281 #define CONFIG_SYS_CSPR2        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 282                                 | CSPR_PORT_SIZE_8 \
 283                                 | CSPR_MSEL_GPCM \
 284                                 | CSPR_V)
 285 #define CONFIG_SYS_AMASK2       IFC_AMASK(64*1024)
 286 #define CONFIG_SYS_CSOR2        0x0
 287 /* CPLD Timing parameters for IFC CS2 */
 288 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 289                                         FTIM0_GPCM_TEADC(0x0e) | \
 290                                         FTIM0_GPCM_TEAHC(0x0e))
 291 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 292                                         FTIM1_GPCM_TRAD(0x1f))
 293 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 294                                         FTIM2_GPCM_TCH(0x8) | \
 295                                         FTIM2_GPCM_TWP(0x1f))
 296 #define CONFIG_SYS_CS2_FTIM3            0x0
 297
 298 /* NAND Flash on IFC */
 299 #define CONFIG_NAND_FSL_IFC
 300 #define CONFIG_SYS_NAND_BASE            0xff800000
 301 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 302
 303 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 304 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 305                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 306                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 307                                 | CSPR_V)
 308 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 309
 310 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 311                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 312                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 313                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 314                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 315                                 | CSOR_NAND_SPRZ_224/* Spare size = 224 */ \
 316                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 317
 318 #define CONFIG_SYS_NAND_ONFI_DETECTION
 319
 320 /* ONFI NAND Flash mode0 Timing Params */
 321 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 322                                         FTIM0_NAND_TWP(0x18)   | \
 323                                         FTIM0_NAND_TWCHT(0x07) | \
 324                                         FTIM0_NAND_TWH(0x0a))
 325 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 326                                         FTIM1_NAND_TWBE(0x39)  | \
 327                                         FTIM1_NAND_TRR(0x0e)   | \
 328                                         FTIM1_NAND_TRP(0x18))
 329 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 330                                         FTIM2_NAND_TREH(0x0a) | \
 331                                         FTIM2_NAND_TWHRE(0x1e))
 332 #define CONFIG_SYS_NAND_FTIM3           0x0
 333
 334 #define CONFIG_SYS_NAND_DDR_LAW         11
 335 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 336 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 337 #define CONFIG_MTD_NAND_VERIFY_WRITE
 338 #define CONFIG_CMD_NAND
 339
 340 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 341
 342 #if defined(CONFIG_NAND)
 343 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 344 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 345 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 346 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 347 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 348 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 349 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 350 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 351 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR_CSPR_EXT
 352 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 353 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 354 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 355 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 356 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 357 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 358 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 359 #else
 360 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR_CSPR_EXT
 361 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 362 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 363 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 364 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 365 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 366 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 367 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 368 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 369 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 370 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 371 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 372 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 373 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 374 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 375 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 376 #endif
 377
 378 #ifdef CONFIG_SPL_BUILD
 379 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 380 #else
 381 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 382 #endif
 383
 384 #if defined(CONFIG_RAMBOOT_PBL)
 385 #define CONFIG_SYS_RAMBOOT
 386 #endif
 387
 388 #define CONFIG_BOARD_EARLY_INIT_R
 389 #define CONFIG_MISC_INIT_R
 390
 391 #define CONFIG_HWCONFIG
 392
 393 /* define to use L1 as initial stack */
 394 #define CONFIG_L1_INIT_RAM
 395 #define CONFIG_SYS_INIT_RAM_LOCK
 396 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 397 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 398 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe0ec000
 399 /* The assembler doesn't like typecast */
 400 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 401         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 402           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 403 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 404
 405 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 406                                         GENERATED_GBL_DATA_SIZE)
 407 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 408
 409 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 410 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 411
 412 /* Serial Port - controlled on board with jumper J8
 413  * open - index 2
 414  * shorted - index 1
 415  */
 416 #define CONFIG_CONS_INDEX       1
 417 #define CONFIG_SYS_NS16550
 418 #define CONFIG_SYS_NS16550_SERIAL
 419 #define CONFIG_SYS_NS16550_REG_SIZE     1
 420 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 421
 422 #define CONFIG_SYS_BAUDRATE_TABLE       \
 423         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 424
 425 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 426 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 427 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 428 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 429 #define CONFIG_SERIAL_MULTI             /* Enable both serial ports */
 430 #ifndef CONFIG_SPL_BUILD
 431 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 432 #endif
 433
 434 /* Use the HUSH parser */
 435 #define CONFIG_SYS_HUSH_PARSER
 436 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 437
 438 #ifdef CONFIG_T1042RDB_PI
 439 /* Video */
 440 #define CONFIG_FSL_DIU_FB
 441
 442 #ifdef CONFIG_FSL_DIU_FB
 443 #define CONFIG_FSL_DIU_CH7301
 444 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 445 #define CONFIG_VIDEO
 446 #define CONFIG_CMD_BMP
 447 #define CONFIG_CFB_CONSOLE
 448 #define CONFIG_CFB_CONSOLE_ANSI
 449 #define CONFIG_VIDEO_SW_CURSOR
 450 #define CONFIG_VGA_AS_SINGLE_DEVICE
 451 #define CONFIG_VIDEO_LOGO
 452 #define CONFIG_VIDEO_BMP_LOGO
 453 #endif
 454 #endif
 455
 456 /* pass open firmware flat tree */
 457 #define CONFIG_OF_LIBFDT
 458 #define CONFIG_OF_BOARD_SETUP
 459 #define CONFIG_OF_STDOUT_VIA_ALIAS
 460
 461 /* new uImage format support */
 462 #define CONFIG_FIT
 463 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 464
 465 /* I2C */
 466 #define CONFIG_SYS_I2C
 467 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 468 #define CONFIG_SYS_FSL_I2C_SPEED        400000  /* I2C speed in Hz */
 469 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 470 #define CONFIG_SYS_FSL_I2C3_SPEED       400000
 471 #define CONFIG_SYS_FSL_I2C4_SPEED       400000
 472 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 473 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 474 #define CONFIG_SYS_FSL_I2C3_SLAVE       0x7F
 475 #define CONFIG_SYS_FSL_I2C4_SLAVE       0x7F
 476 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 477 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 478 #define CONFIG_SYS_FSL_I2C3_OFFSET      0x119000
 479 #define CONFIG_SYS_FSL_I2C4_OFFSET      0x119100
 480
 481 /* I2C bus multiplexer */
 482 #define I2C_MUX_PCA_ADDR                0x70
 483 #if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
 484 #define I2C_MUX_CH_DEFAULT      0x8
 485 #endif
 486
 487 #ifdef CONFIG_T1042RDB_PI
 488 /* LDI/DVI Encoder for display */
 489 #define CONFIG_SYS_I2C_LDI_ADDR         0x38
 490 #define CONFIG_SYS_I2C_DVI_ADDR         0x75
 491
 492 /*
 493  * RTC configuration
 494  */
 495 #define RTC
 496 #define CONFIG_RTC_DS1337               1
 497 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 498
 499 /*DVI encoder*/
 500 #define CONFIG_HDMI_ENCODER_I2C_ADDR  0x75
 501 #endif
 502
 503 /*
 504  * eSPI - Enhanced SPI
 505  */
 506 #define CONFIG_FSL_ESPI
 507 #define CONFIG_SPI_FLASH
 508 #define CONFIG_SPI_FLASH_STMICRO
 509 #define CONFIG_CMD_SF
 510 #define CONFIG_SF_DEFAULT_SPEED         10000000
 511 #define CONFIG_SF_DEFAULT_MODE          0
 512 #define CONFIG_ENV_SPI_BUS              0
 513 #define CONFIG_ENV_SPI_CS               0
 514 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 515 #define CONFIG_ENV_SPI_MODE             0
 516
 517 /*
 518  * General PCI
 519  * Memory space is mapped 1-1, but I/O space must start from 0.
 520  */
 521
 522 #ifdef CONFIG_PCI
 523 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 524 #ifdef CONFIG_PCIE1
 525 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 526 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 527 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 528 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 529 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 530 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 531 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 532 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 533 #endif
 534
 535 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 536 #ifdef CONFIG_PCIE2
 537 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 538 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 539 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 540 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 541 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 542 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 543 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 544 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 545 #endif
 546
 547 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 548 #ifdef CONFIG_PCIE3
 549 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 550 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 551 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 552 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 553 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 554 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 555 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 556 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 557 #endif
 558
 559 /* controller 4, Base address 203000 */
 560 #ifdef CONFIG_PCIE4
 561 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 562 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 563 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 564 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 565 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 566 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 567 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 568 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 569 #endif
 570
 571 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 572 #define CONFIG_E1000
 573
 574 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 575 #define CONFIG_DOS_PARTITION
 576 #endif  /* CONFIG_PCI */
 577
 578 /* SATA */
 579 #define CONFIG_FSL_SATA_V2
 580 #ifdef CONFIG_FSL_SATA_V2
 581 #define CONFIG_LIBATA
 582 #define CONFIG_FSL_SATA
 583
 584 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 585 #define CONFIG_SATA1
 586 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 587 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 588
 589 #define CONFIG_LBA48
 590 #define CONFIG_CMD_SATA
 591 #define CONFIG_DOS_PARTITION
 592 #define CONFIG_CMD_EXT2
 593 #endif
 594
 595 /*
 596 * USB
 597 */
 598 #define CONFIG_HAS_FSL_DR_USB
 599
 600 #ifdef CONFIG_HAS_FSL_DR_USB
 601 #define CONFIG_USB_EHCI
 602
 603 #ifdef CONFIG_USB_EHCI
 604 #define CONFIG_CMD_USB
 605 #define CONFIG_USB_STORAGE
 606 #define CONFIG_USB_EHCI_FSL
 607 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 608 #define CONFIG_CMD_EXT2
 609 #endif
 610 #endif
 611
 612 #define CONFIG_MMC
 613
 614 #ifdef CONFIG_MMC
 615 #define CONFIG_FSL_ESDHC
 616 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 617 #define CONFIG_CMD_MMC
 618 #define CONFIG_GENERIC_MMC
 619 #define CONFIG_CMD_EXT2
 620 #define CONFIG_CMD_FAT
 621 #define CONFIG_DOS_PARTITION
 622 #endif
 623
 624 /* Qman/Bman */
 625 #ifndef CONFIG_NOBQFMAN
 626 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 627 #define CONFIG_SYS_BMAN_NUM_PORTALS     25
 628 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 629 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 630 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 631 #define CONFIG_SYS_QMAN_NUM_PORTALS     25
 632 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 633 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 634 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 635
 636 #define CONFIG_SYS_DPAA_FMAN
 637 #define CONFIG_SYS_DPAA_PME
 638
 639 #if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
 640 #define CONFIG_QE
 641 #define CONFIG_U_QE
 642 #endif
 643
 644 /* Default address of microcode for the Linux Fman driver */
 645 #if defined(CONFIG_SPIFLASH)
 646 /*
 647  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 648  * env, so we got 0x110000.
 649  */
 650 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 651 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 652 #elif defined(CONFIG_SDCARD)
 653 /*
 654  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 655  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 656  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 657  */
 658 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 659 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 660 #elif defined(CONFIG_NAND)
 661 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 662 #define CONFIG_SYS_FMAN_FW_ADDR (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
 663 #else
 664 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 665 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 666 #endif
 667
 668 #if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
 669 #if defined(CONFIG_SPIFLASH)
 670 #define CONFIG_SYS_QE_FW_ADDR           0x130000
 671 #elif defined(CONFIG_SDCARD)
 672 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
 673 #elif defined(CONFIG_NAND)
 674 #define CONFIG_SYS_QE_FW_ADDR           (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 675 #else
 676 #define CONFIG_SYS_QE_FW_ADDR           0xEFF10000
 677 #endif
 678 #endif
 679
 680
 681 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 682 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 683 #endif /* CONFIG_NOBQFMAN */
 684
 685 #ifdef CONFIG_SYS_DPAA_FMAN
 686 #define CONFIG_FMAN_ENET
 687 #define CONFIG_PHY_VITESSE
 688 #define CONFIG_PHY_REALTEK
 689 #endif
 690
 691 #ifdef CONFIG_FMAN_ENET
 692 #if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
 693 #define CONFIG_SYS_SGMII1_PHY_ADDR              0x03
 694 #endif
 695 #define CONFIG_SYS_RGMII1_PHY_ADDR              0x01
 696 #define CONFIG_SYS_RGMII2_PHY_ADDR              0x02
 697
 698 #define CONFIG_MII              /* MII PHY management */
 699 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 700 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 701 #endif
 702
 703 /*
 704  * Environment
 705  */
 706 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 707 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 708
 709 /*
 710  * Command line configuration.
 711  */
 712 #include <config_cmd_default.h>
 713
 714 #ifdef CONFIG_T1042RDB_PI
 715 #define CONFIG_CMD_DATE
 716 #endif
 717 #define CONFIG_CMD_DHCP
 718 #define CONFIG_CMD_ELF
 719 #define CONFIG_CMD_ERRATA
 720 #define CONFIG_CMD_GREPENV
 721 #define CONFIG_CMD_IRQ
 722 #define CONFIG_CMD_I2C
 723 #define CONFIG_CMD_MII
 724 #define CONFIG_CMD_PING
 725 #define CONFIG_CMD_REGINFO
 726 #define CONFIG_CMD_SETEXPR
 727
 728 #ifdef CONFIG_PCI
 729 #define CONFIG_CMD_PCI
 730 #define CONFIG_CMD_NET
 731 #endif
 732
 733 /*
 734  * Miscellaneous configurable options
 735  */
 736 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 737 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 738 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 739 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 740 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 741 #ifdef CONFIG_CMD_KGDB
 742 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 743 #else
 744 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 745 #endif
 746 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 747 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 748 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 749
 750 /*
 751  * For booting Linux, the board info and command line data
 752  * have to be in the first 64 MB of memory, since this is
 753  * the maximum mapped by the Linux kernel during initialization.
 754  */
 755 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 756 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 757
 758 #ifdef CONFIG_CMD_KGDB
 759 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 760 #endif
 761
 762 /*
 763  * Dynamic MTD Partition support with mtdparts
 764  */
 765 #ifndef CONFIG_SYS_NO_FLASH
 766 #define CONFIG_MTD_DEVICE
 767 #define CONFIG_MTD_PARTITIONS
 768 #define CONFIG_CMD_MTDPARTS
 769 #define CONFIG_FLASH_CFI_MTD
 770 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \
 771                         "spi0=spife110000.0"
 772 #define MTDPARTS_DEFAULT        "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
 773                                 "128k(dtb),96m(fs),-(user);"\
 774                                 "fff800000.flash:2m(uboot),9m(kernel),"\
 775                                 "128k(dtb),96m(fs),-(user);spife110000.0:" \
 776                                 "2m(uboot),9m(kernel),128k(dtb),-(user)"
 777 #endif
 778
 779 /*
 780  * Environment Configuration
 781  */
 782 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 783 #define CONFIG_BOOTFILE         "uImage"
 784 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 785
 786 /* default location for tftp and bootm */
 787 #define CONFIG_LOADADDR         1000000
 788
 789 #define CONFIG_BOOTDELAY        10      /*-1 disables auto-boot*/
 790
 791 #define CONFIG_BAUDRATE 115200
 792
 793 #define __USB_PHY_TYPE  utmi
 794 #define RAMDISKFILE     "t104xrdb/ramdisk.uboot"
 795
 796 #ifdef CONFIG_T1040RDB
 797 #define FDTFILE         "t1040rdb/t1040rdb.dtb"
 798 #elif defined(CONFIG_T1042RDB_PI)
 799 #define FDTFILE         "t1042rdb_pi/t1042rdb_pi.dtb"
 800 #elif defined(CONFIG_T1042RDB)
 801 #define FDTFILE         "t1042rdb/t1042rdb.dtb"
 802 #endif
 803
 804 #ifdef CONFIG_FSL_DIU_FB
 805 #define DIU_ENVIRONMENT "video-mode=fslfb:1024x768-32@60,monitor=dvi"
 806 #else
 807 #define DIU_ENVIRONMENT
 808 #endif
 809
 810 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 811         "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;"                  \
 812         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 813         "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 814         "netdev=eth0\0"                                         \
 815         "video-mode=" __stringify(DIU_ENVIRONMENT) "\0"         \
 816         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 817         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 818         "tftpflash=tftpboot $loadaddr $uboot && "               \
 819         "protect off $ubootaddr +$filesize && "                 \
 820         "erase $ubootaddr +$filesize && "                       \
 821         "cp.b $loadaddr $ubootaddr $filesize && "               \
 822         "protect on $ubootaddr +$filesize && "                  \
 823         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 824         "consoledev=ttyS0\0"                                    \
 825         "ramdiskaddr=2000000\0"                                 \
 826         "ramdiskfile=" __stringify(RAMDISKFILE) "\0"            \
 827         "fdtaddr=c00000\0"                                      \
 828         "fdtfile=" __stringify(FDTFILE) "\0"                    \
 829         "bdev=sda3\0"
 830
 831 #define CONFIG_LINUX                       \
 832         "setenv bootargs root=/dev/ram rw "            \
 833         "console=$consoledev,$baudrate $othbootargs;"  \
 834         "setenv ramdiskaddr 0x02000000;"               \
 835         "setenv fdtaddr 0x00c00000;"                   \
 836         "setenv loadaddr 0x1000000;"                   \
 837         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 838
 839 #define CONFIG_HDBOOT                                   \
 840         "setenv bootargs root=/dev/$bdev rw "           \
 841         "console=$consoledev,$baudrate $othbootargs;"   \
 842         "tftp $loadaddr $bootfile;"                     \
 843         "tftp $fdtaddr $fdtfile;"                       \
 844         "bootm $loadaddr - $fdtaddr"
 845
 846 #define CONFIG_NFSBOOTCOMMAND                   \
 847         "setenv bootargs root=/dev/nfs rw "     \
 848         "nfsroot=$serverip:$rootpath "          \
 849         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 850         "console=$consoledev,$baudrate $othbootargs;"   \
 851         "tftp $loadaddr $bootfile;"             \
 852         "tftp $fdtaddr $fdtfile;"               \
 853         "bootm $loadaddr - $fdtaddr"
 854
 855 #define CONFIG_RAMBOOTCOMMAND                           \
 856         "setenv bootargs root=/dev/ram rw "             \
 857         "console=$consoledev,$baudrate $othbootargs;"   \
 858         "tftp $ramdiskaddr $ramdiskfile;"               \
 859         "tftp $loadaddr $bootfile;"                     \
 860         "tftp $fdtaddr $fdtfile;"                       \
 861         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 862
 863 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 864
 865 #ifdef CONFIG_SECURE_BOOT
 866 #include <asm/fsl_secure_boot.h>
 867 #endif
 868
 869 #endif  /* __CONFIG_H */