include/configs/T2080QDS.h

   1 /*
   2  * Copyright 2011-2013 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * T2080 QDS board configuration file
   9  */
  10
  11 #ifndef __T2080QDS_H
  12 #define __T2080QDS_H
  13
  14 #define CONFIG_T2080QDS
  15 #define CONFIG_ICS307_REFCLK_HZ 25000000  /* ICS307 ref clk freq */
  16 #define CONFIG_MMC
  17 #define CONFIG_SPI_FLASH
  18 #define CONFIG_USB_EHCI
  19 #define CONFIG_FSL_SATA_V2
  20 #define CONFIG_SYS_SRIO         /* Enable Serial RapidIO Support */
  21 #define CONFIG_SRIO1            /* SRIO port 1 */
  22 #define CONFIG_SRIO2            /* SRIO port 2 */
  23
  24 /* High Level Configuration Options */
  25 #define CONFIG_PHYS_64BIT
  26 #define CONFIG_BOOKE
  27 #define CONFIG_E500             /* BOOKE e500 family */
  28 #define CONFIG_E500MC           /* BOOKE e500mc family */
  29 #define CONFIG_SYS_BOOK3E_HV    /* Category E.HV supported */
  30 #define CONFIG_MPC85xx          /* MPC85xx/PQ3 platform */
  31 #define CONFIG_MP               /* support multiple processors */
  32 #define CONFIG_ENABLE_36BIT_PHYS
  33
  34 #ifdef CONFIG_PHYS_64BIT
  35 #define CONFIG_ADDR_MAP 1
  36 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */
  37 #endif
  38
  39 #define CONFIG_SYS_FSL_CPC      /* Corenet Platform Cache */
  40 #define CONFIG_SYS_NUM_CPC      CONFIG_NUM_DDR_CONTROLLERS
  41 #define CONFIG_FSL_IFC          /* Enable IFC Support */
  42 #define CONFIG_FSL_LAW          /* Use common FSL init code */
  43 #define CONFIG_ENV_OVERWRITE
  44
  45 #ifdef CONFIG_RAMBOOT_PBL
  46 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  47 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  48 #define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/t2080qds/t2080_pbi.cfg
  49 #define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/t2080qds/t2080_rcw.cfg
  50 #endif
  51
  52 #define CONFIG_SRIO_PCIE_BOOT_MASTER
  53 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  54 /* Set 1M boot space */
  55 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  56 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  57                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  58 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  59 #define CONFIG_SYS_NO_FLASH
  60 #endif
  61
  62 #ifndef CONFIG_SYS_TEXT_BASE
  63 #define CONFIG_SYS_TEXT_BASE    0xeff80000
  64 #endif
  65
  66 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  67 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  68 #endif
  69
  70 /*
  71  * These can be toggled for performance analysis, otherwise use default.
  72  */
  73 #define CONFIG_SYS_CACHE_STASHING
  74 #define CONFIG_BTB              /* toggle branch predition */
  75 #define CONFIG_DDR_ECC
  76 #ifdef CONFIG_DDR_ECC
  77 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  78 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  79 #endif
  80
  81 #ifdef CONFIG_SYS_NO_FLASH
  82 #if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL)
  83 #define CONFIG_ENV_IS_NOWHERE
  84 #endif
  85 #else
  86 #define CONFIG_FLASH_CFI_DRIVER
  87 #define CONFIG_SYS_FLASH_CFI
  88 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  89 #endif
  90
  91 #if defined(CONFIG_SPIFLASH)
  92 #define CONFIG_SYS_EXTRA_ENV_RELOC
  93 #define CONFIG_ENV_IS_IN_SPI_FLASH
  94 #define CONFIG_ENV_SPI_BUS      0
  95 #define CONFIG_ENV_SPI_CS       0
  96 #define CONFIG_ENV_SPI_MAX_HZ   10000000
  97 #define CONFIG_ENV_SPI_MODE     0
  98 #define CONFIG_ENV_SIZE         0x2000     /* 8KB */
  99 #define CONFIG_ENV_OFFSET       0x100000   /* 1MB */
 100 #define CONFIG_ENV_SECT_SIZE    0x10000
 101 #elif defined(CONFIG_SDCARD)
 102 #define CONFIG_SYS_EXTRA_ENV_RELOC
 103 #define CONFIG_ENV_IS_IN_MMC
 104 #define CONFIG_SYS_MMC_ENV_DEV  0
 105 #define CONFIG_ENV_SIZE         0x2000
 106 #define CONFIG_ENV_OFFSET       (512 * 1105)
 107 #elif defined(CONFIG_NAND)
 108 #define CONFIG_SYS_EXTRA_ENV_RELOC
 109 #define CONFIG_ENV_IS_IN_NAND
 110 #define CONFIG_ENV_SIZE         CONFIG_SYS_NAND_BLOCK_SIZE
 111 #define CONFIG_ENV_OFFSET       (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
 112 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 113 #define CONFIG_ENV_IS_IN_REMOTE
 114 #define CONFIG_ENV_ADDR         0xffe20000
 115 #define CONFIG_ENV_SIZE         0x2000
 116 #elif defined(CONFIG_ENV_IS_NOWHERE)
 117 #define CONFIG_ENV_SIZE         0x2000
 118 #else
 119 #define CONFIG_ENV_IS_IN_FLASH
 120 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 121 #define CONFIG_ENV_SIZE         0x2000
 122 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 123 #endif
 124
 125 #ifndef __ASSEMBLY__
 126 unsigned long get_board_sys_clk(void);
 127 unsigned long get_board_ddr_clk(void);
 128 #endif
 129
 130 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk()
 131 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 132
 133 /*
 134  * Config the L3 Cache as L3 SRAM
 135  */
 136 #define CONFIG_SYS_INIT_L3_ADDR  CONFIG_RAMBOOT_TEXT_BASE
 137
 138 #define CONFIG_SYS_DCSRBAR      0xf0000000
 139 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull
 140
 141 /* EEPROM */
 142 #define CONFIG_ID_EEPROM
 143 #define CONFIG_SYS_I2C_EEPROM_NXID
 144 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 145 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 146 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 147
 148 /*
 149  * DDR Setup
 150  */
 151 #define CONFIG_VERY_BIG_RAM
 152 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 153 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 154 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 155 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 156 #define CONFIG_DDR_SPD
 157 #define CONFIG_SYS_FSL_DDR3
 158 #undef CONFIG_FSL_DDR_INTERACTIVE
 159 #define CONFIG_SYS_SPD_BUS_NUM  0
 160 #define CONFIG_SYS_SDRAM_SIZE   2048    /* for fixed parameter use */
 161 #define SPD_EEPROM_ADDRESS1     0x51
 162 #define SPD_EEPROM_ADDRESS2     0x52
 163 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1
 164 #define CTRL_INTLV_PREFERED     cacheline
 165
 166 /*
 167  * IFC Definitions
 168  */
 169 #define CONFIG_SYS_FLASH_BASE           0xe0000000
 170 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 171 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 172 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 173                                 + 0x8000000) | \
 174                                 CSPR_PORT_SIZE_16 | \
 175                                 CSPR_MSEL_NOR | \
 176                                 CSPR_V)
 177 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 178 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 179                                 CSPR_PORT_SIZE_16 | \
 180                                 CSPR_MSEL_NOR | \
 181                                 CSPR_V)
 182 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 183 /* NOR Flash Timing Params */
 184 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 185
 186 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 187                                 FTIM0_NOR_TEADC(0x5) | \
 188                                 FTIM0_NOR_TEAHC(0x5))
 189 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 190                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 191                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 192 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 193                                 FTIM2_NOR_TCH(0x4) | \
 194                                 FTIM2_NOR_TWPH(0x0E) | \
 195                                 FTIM2_NOR_TWP(0x1c))
 196 #define CONFIG_SYS_NOR_FTIM3    0x0
 197
 198 #define CONFIG_SYS_FLASH_QUIET_TEST
 199 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 200
 201 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 202 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 203 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 204 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 205
 206 #define CONFIG_SYS_FLASH_EMPTY_INFO
 207 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 208                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 209
 210 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 211 #define QIXIS_BASE                      0xffdf0000
 212 #define QIXIS_LBMAP_SWITCH              6
 213 #define QIXIS_LBMAP_MASK                0x0f
 214 #define QIXIS_LBMAP_SHIFT               0
 215 #define QIXIS_LBMAP_DFLTBANK            0x00
 216 #define QIXIS_LBMAP_ALTBANK             0x04
 217 #define QIXIS_RST_CTL_RESET             0x83
 218 #define QIXIS_RST_FORCE_MEM             0x1
 219 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 220 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 221 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 222 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 223
 224 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 225 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 226                                 | CSPR_PORT_SIZE_8 \
 227                                 | CSPR_MSEL_GPCM \
 228                                 | CSPR_V)
 229 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
 230 #define CONFIG_SYS_CSOR3        0x0
 231 /* QIXIS Timing parameters for IFC CS3 */
 232 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 233                                         FTIM0_GPCM_TEADC(0x0e) | \
 234                                         FTIM0_GPCM_TEAHC(0x0e))
 235 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 236                                         FTIM1_GPCM_TRAD(0x3f))
 237 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 238                                         FTIM2_GPCM_TCH(0x0) | \
 239                                         FTIM2_GPCM_TWP(0x1f))
 240 #define CONFIG_SYS_CS3_FTIM3            0x0
 241
 242 /* NAND Flash on IFC */
 243 #define CONFIG_NAND_FSL_IFC
 244 #define CONFIG_SYS_NAND_BASE            0xff800000
 245 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 246
 247 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 248 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 249                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 250                                 | CSPR_MSEL_NAND         /* MSEL = NAND */ \
 251                                 | CSPR_V)
 252 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 253
 254 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 255                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 256                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */     \
 257                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */   \
 258                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */\
 259                                 | CSOR_NAND_SPRZ_64     /* Spare size = 64 */\
 260                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 261
 262 #define CONFIG_SYS_NAND_ONFI_DETECTION
 263
 264 /* ONFI NAND Flash mode0 Timing Params */
 265 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 266                                         FTIM0_NAND_TWP(0x18)    | \
 267                                         FTIM0_NAND_TWCHT(0x07)  | \
 268                                         FTIM0_NAND_TWH(0x0a))
 269 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 270                                         FTIM1_NAND_TWBE(0x39)   | \
 271                                         FTIM1_NAND_TRR(0x0e)    | \
 272                                         FTIM1_NAND_TRP(0x18))
 273 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f)  | \
 274                                         FTIM2_NAND_TREH(0x0a)   | \
 275                                         FTIM2_NAND_TWHRE(0x1e))
 276 #define CONFIG_SYS_NAND_FTIM3           0x0
 277
 278 #define CONFIG_SYS_NAND_DDR_LAW         11
 279 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 280 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 281 #define CONFIG_MTD_NAND_VERIFY_WRITE
 282 #define CONFIG_CMD_NAND
 283 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 284
 285 #if defined(CONFIG_NAND)
 286 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 287 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 288 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 289 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 290 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 291 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 292 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 293 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 294 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 295 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
 296 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 297 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 298 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 299 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 300 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 301 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 302 #else
 303 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 304 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 305 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 306 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 307 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 308 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 309 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 310 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 311 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 312 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 313 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 314 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 315 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 316 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 317 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 318 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 319 #endif
 320 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 321 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 322 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 323 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 324 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 325 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 326 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 327 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 328
 329 #if defined(CONFIG_RAMBOOT_PBL)
 330 #define CONFIG_SYS_RAMBOOT
 331 #endif
 332
 333 #define CONFIG_SYS_MONITOR_BASE  CONFIG_SYS_TEXT_BASE
 334 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 335 #define CONFIG_MISC_INIT_R
 336 #define CONFIG_HWCONFIG
 337
 338 /* define to use L1 as initial stack */
 339 #define CONFIG_L1_INIT_RAM
 340 #define CONFIG_SYS_INIT_RAM_LOCK
 341 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000 /* Initial L1 address */
 342 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 343 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe0ec000
 344 /* The assembler doesn't like typecast */
 345 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 346                         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 347                         CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 348 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000
 349 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 350                                                 GENERATED_GBL_DATA_SIZE)
 351 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 352 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 353 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 354
 355 /*
 356  * Serial Port
 357  */
 358 #define CONFIG_CONS_INDEX               1
 359 #define CONFIG_SYS_NS16550
 360 #define CONFIG_SYS_NS16550_SERIAL
 361 #define CONFIG_SYS_NS16550_REG_SIZE     1
 362 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 363 #define CONFIG_SYS_BAUDRATE_TABLE       \
 364         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 365 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 366 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 367 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 368 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 369
 370 /* Use the HUSH parser */
 371 #define CONFIG_SYS_HUSH_PARSER
 372 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 373
 374 /* pass open firmware flat tree */
 375 #define CONFIG_OF_LIBFDT
 376 #define CONFIG_OF_BOARD_SETUP
 377 #define CONFIG_OF_STDOUT_VIA_ALIAS
 378
 379 /* new uImage format support */
 380 #define CONFIG_FIT
 381 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 382
 383 /*
 384  * I2C
 385  */
 386 #define CONFIG_SYS_I2C
 387 #define CONFIG_SYS_I2C_FSL
 388 #define CONFIG_SYS_FSL_I2C_SLAVE   0x7F
 389 #define CONFIG_SYS_FSL_I2C2_SLAVE  0x7F
 390 #define CONFIG_SYS_FSL_I2C3_SLAVE  0x7F
 391 #define CONFIG_SYS_FSL_I2C4_SLAVE  0x7F
 392 #define CONFIG_SYS_FSL_I2C_OFFSET  0x118000
 393 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100
 394 #define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000
 395 #define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100
 396 #define CONFIG_SYS_FSL_I2C_SPEED   100000
 397 #define CONFIG_SYS_FSL_I2C2_SPEED  100000
 398 #define CONFIG_SYS_FSL_I2C3_SPEED  100000
 399 #define CONFIG_SYS_FSL_I2C4_SPEED  100000
 400 #define I2C_MUX_PCA_ADDR_PRI    0x77 /* I2C bus multiplexer,primary */
 401 #define I2C_MUX_PCA_ADDR_SEC1   0x75 /* I2C bus multiplexer,secondary 1 */
 402 #define I2C_MUX_PCA_ADDR_SEC2   0x76 /* I2C bus multiplexer,secondary 2 */
 403 #define I2C_MUX_CH_DEFAULT      0x8
 404
 405
 406 /*
 407  * RapidIO
 408  */
 409 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 410 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 411 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000 /* 256M */
 412 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 413 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 414 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000 /* 256M */
 415 /*
 416  * for slave u-boot IMAGE instored in master memory space,
 417  * PHYS must be aligned based on the SIZE
 418  */
 419 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull
 420 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull
 421 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE     0x80000 /* 512K */
 422 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull
 423 /*
 424  * for slave UCODE and ENV instored in master memory space,
 425  * PHYS must be aligned based on the SIZE
 426  */
 427 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull
 428 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 429 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE    0x40000 /* 256K */
 430
 431 /* slave core release by master*/
 432 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 433 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 434
 435 /*
 436  * SRIO_PCIE_BOOT - SLAVE
 437  */
 438 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 439 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 440 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 441                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 442 #endif
 443
 444 /*
 445  * eSPI - Enhanced SPI
 446  */
 447 #ifdef CONFIG_SPI_FLASH
 448 #define CONFIG_FSL_ESPI
 449 #define CONFIG_SPI_FLASH_SST
 450 #define CONFIG_SPI_FLASH_STMICRO
 451 #define CONFIG_SPI_FLASH_SPANSION
 452 #define CONFIG_CMD_SF
 453 #define CONFIG_SF_DEFAULT_SPEED  10000000
 454 #define CONFIG_SF_DEFAULT_MODE    0
 455 #endif
 456
 457 /*
 458  * General PCI
 459  * Memory space is mapped 1-1, but I/O space must start from 0.
 460  */
 461 #define CONFIG_PCI              /* Enable PCI/PCIE */
 462 #define CONFIG_PCIE1            /* PCIE controler 1 */
 463 #define CONFIG_PCIE2            /* PCIE controler 2 */
 464 #define CONFIG_PCIE3            /* PCIE controler 3 */
 465 #define CONFIG_PCIE4            /* PCIE controler 4 */
 466 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 467 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
 468 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 469 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 470 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 471 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 472 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 473 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 474 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 475 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 476 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 477
 478 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 479 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 480 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 481 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 482 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000 /* 256M */
 483 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 484 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 485 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 486 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 487
 488 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 489 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xb0000000
 490 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 491 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc30000000ull
 492 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 493 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 494 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 495 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 496 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 497
 498 /* controller 4, Base address 203000 */
 499 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xc0000000
 500 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 501 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc40000000ull
 502 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 503 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 504 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 505 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 506
 507 #ifdef CONFIG_PCI
 508 #define CONFIG_PCI_INDIRECT_BRIDGE
 509 #define CONFIG_FSL_PCIE_RESET           /* need PCIe reset errata LSZ ADD */
 510 #define CONFIG_NET_MULTI
 511 #define CONFIG_E1000
 512 #define CONFIG_PCI_PNP          /* do pci plug-and-play */
 513 #define CONFIG_PCI_SCAN_SHOW    /* show pci devices on startup */
 514 #define CONFIG_DOS_PARTITION
 515 #endif
 516
 517 /* Qman/Bman */
 518 #ifndef CONFIG_NOBQFMAN
 519 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 520 #define CONFIG_SYS_BMAN_NUM_PORTALS     18
 521 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 522 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 523 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 524 #define CONFIG_SYS_QMAN_NUM_PORTALS     18
 525 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 526 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 527 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 528
 529 #define CONFIG_SYS_DPAA_FMAN
 530 #define CONFIG_SYS_DPAA_PME
 531 #define CONFIG_SYS_PMAN
 532 #define CONFIG_SYS_DPAA_DCE
 533 #define CONFIG_SYS_DPAA_RMAN            /* RMan */
 534 #define CONFIG_SYS_INTERLAKEN
 535
 536 /* Default address of microcode for the Linux Fman driver */
 537 #if defined(CONFIG_SPIFLASH)
 538 /*
 539  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 540  * env, so we got 0x110000.
 541  */
 542 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 543 #define CONFIG_SYS_QE_FMAN_FW_ADDR      0x110000
 544 #elif defined(CONFIG_SDCARD)
 545 /*
 546  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 547  * about 545KB (1089 blocks), Env is stored after the image, and the env size is
 548  * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130.
 549  */
 550 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 551 #define CONFIG_SYS_QE_FMAN_FW_ADDR      (512 * 1130)
 552 #elif defined(CONFIG_NAND)
 553 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 554 #define CONFIG_SYS_QE_FMAN_FW_ADDR      (6 * CONFIG_SYS_NAND_BLOCK_SIZE)
 555 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 556 /*
 557  * Slave has no ucode locally, it can fetch this from remote. When implementing
 558  * in two corenet boards, slave's ucode could be stored in master's memory
 559  * space, the address can be mapped from slave TLB->slave LAW->
 560  * slave SRIO or PCIE outbound window->master inbound window->
 561  * master LAW->the ucode address in master's memory space.
 562  */
 563 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 564 #define CONFIG_SYS_QE_FMAN_FW_ADDR      0xFFE00000
 565 #else
 566 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 567 #define CONFIG_SYS_QE_FMAN_FW_ADDR      0xEFF40000
 568 #endif
 569 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 570 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 571 #endif /* CONFIG_NOBQFMAN */
 572
 573 #ifdef CONFIG_SYS_DPAA_FMAN
 574 #define CONFIG_FMAN_ENET
 575 #define CONFIG_PHYLIB_10G
 576 #define CONFIG_PHY_VITESSE
 577 #define CONFIG_PHY_REALTEK
 578 #define CONFIG_PHY_TERANETICS
 579 #define RGMII_PHY1_ADDR 0x1
 580 #define RGMII_PHY2_ADDR 0x2
 581 #define FM1_10GEC1_PHY_ADDR       0x3
 582 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 583 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
 584 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 585 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
 586 #endif
 587
 588 #ifdef CONFIG_FMAN_ENET
 589 #define CONFIG_MII              /* MII PHY management */
 590 #define CONFIG_ETHPRIME         "FM1@DTSEC3"
 591 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 592 #endif
 593
 594 /*
 595  * SATA
 596  */
 597 #ifdef CONFIG_FSL_SATA_V2
 598 #define CONFIG_LIBATA
 599 #define CONFIG_FSL_SATA
 600 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 601 #define CONFIG_SATA1
 602 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 603 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 604 #define CONFIG_SATA2
 605 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 606 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 607 #define CONFIG_LBA48
 608 #define CONFIG_CMD_SATA
 609 #define CONFIG_DOS_PARTITION
 610 #define CONFIG_CMD_EXT2
 611 #endif
 612
 613 /*
 614  * USB
 615  */
 616 #ifdef CONFIG_USB_EHCI
 617 #define CONFIG_CMD_USB
 618 #define CONFIG_USB_STORAGE
 619 #define CONFIG_USB_EHCI_FSL
 620 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 621 #define CONFIG_CMD_EXT2
 622 #define CONFIG_HAS_FSL_DR_USB
 623 #endif
 624
 625 /*
 626  * SDHC
 627  */
 628 #ifdef CONFIG_MMC
 629 #define CONFIG_CMD_MMC
 630 #define CONFIG_FSL_ESDHC
 631 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 632 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 633 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 634 #define CONFIG_GENERIC_MMC
 635 #define CONFIG_CMD_EXT2
 636 #define CONFIG_CMD_FAT
 637 #define CONFIG_DOS_PARTITION
 638 #endif
 639
 640 /*
 641  * Environment
 642  */
 643 #define CONFIG_LOADS_ECHO       /* echo on for serial download */
 644 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 645
 646 /*
 647  * Command line configuration.
 648  */
 649 #include <config_cmd_default.h>
 650
 651 #define CONFIG_CMD_DHCP
 652 #define CONFIG_CMD_ELF
 653 #define CONFIG_CMD_ERRATA
 654 #define CONFIG_CMD_GREPENV
 655 #define CONFIG_CMD_IRQ
 656 #define CONFIG_CMD_I2C
 657 #define CONFIG_CMD_MII
 658 #define CONFIG_CMD_PING
 659 #define CONFIG_CMD_SETEXPR
 660 #define CONFIG_CMD_REGINFO
 661 #define CONFIG_CMD_BDI
 662
 663 #ifdef CONFIG_PCI
 664 #define CONFIG_CMD_PCI
 665 #define CONFIG_CMD_NET
 666 #endif
 667
 668 /*
 669  * Miscellaneous configurable options
 670  */
 671 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 672 #define CONFIG_CMDLINE_EDITING          /* Command-line editing */
 673 #define CONFIG_AUTO_COMPLETE            /* add autocompletion support */
 674 #define CONFIG_SYS_LOAD_ADDR    0x2000000 /* default load address */
 675 #define CONFIG_SYS_PROMPT       "=> "     /* Monitor Command Prompt */
 676 #ifdef CONFIG_CMD_KGDB
 677 #define CONFIG_SYS_CBSIZE       1024      /* Console I/O Buffer Size */
 678 #else
 679 #define CONFIG_SYS_CBSIZE       256       /* Console I/O Buffer Size */
 680 #endif
 681 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 682 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 683 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 684 #define CONFIG_SYS_HZ           1000    /* decrementer freq: 1ms ticks*/
 685
 686 /*
 687  * For booting Linux, the board info and command line data
 688  * have to be in the first 64 MB of memory, since this is
 689  * the maximum mapped by the Linux kernel during initialization.
 690  */
 691 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 692 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 693
 694 #ifdef CONFIG_CMD_KGDB
 695 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 696 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 697 #endif
 698
 699 /*
 700  * Environment Configuration
 701  */
 702 #define CONFIG_ROOTPATH  "/opt/nfsroot"
 703 #define CONFIG_BOOTFILE  "uImage"
 704 #define CONFIG_UBOOTPATH "u-boot.bin"   /* U-Boot image on TFTP server */
 705
 706 /* default location for tftp and bootm */
 707 #define CONFIG_LOADADDR         1000000
 708 #define CONFIG_BAUDRATE         115200
 709 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 710 #define __USB_PHY_TYPE          utmi
 711
 712 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 713         "hwconfig=fsl_ddr:"                                     \
 714         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 715         "bank_intlv=auto;"                                      \
 716         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 717         "netdev=eth0\0"                                         \
 718         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 719         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 720         "tftpflash=tftpboot $loadaddr $uboot && "               \
 721         "protect off $ubootaddr +$filesize && "                 \
 722         "erase $ubootaddr +$filesize && "                       \
 723         "cp.b $loadaddr $ubootaddr $filesize && "               \
 724         "protect on $ubootaddr +$filesize && "                  \
 725         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 726         "consoledev=ttyS0\0"                                    \
 727         "ramdiskaddr=2000000\0"                                 \
 728         "ramdiskfile=t2080qds/ramdisk.uboot\0"                  \
 729         "fdtaddr=c00000\0"                                      \
 730         "fdtfile=t2080qds/t2080qds.dtb\0"                       \
 731         "bdev=sda3\0"                                           \
 732         "c=ffe\0"
 733
 734 /*
 735  * For emulation this causes u-boot to jump to the start of the
 736  * proof point app code automatically
 737  */
 738 #define CONFIG_PROOF_POINTS                             \
 739         "setenv bootargs root=/dev/$bdev rw "           \
 740         "console=$consoledev,$baudrate $othbootargs;"   \
 741         "cpu 1 release 0x29000000 - - -;"               \
 742         "cpu 2 release 0x29000000 - - -;"               \
 743         "cpu 3 release 0x29000000 - - -;"               \
 744         "cpu 4 release 0x29000000 - - -;"               \
 745         "cpu 5 release 0x29000000 - - -;"               \
 746         "cpu 6 release 0x29000000 - - -;"               \
 747         "cpu 7 release 0x29000000 - - -;"               \
 748         "go 0x29000000"
 749
 750 #define CONFIG_HVBOOT                           \
 751         "setenv bootargs config-addr=0x60000000; "      \
 752         "bootm 0x01000000 - 0x00f00000"
 753
 754 #define CONFIG_ALU                              \
 755         "setenv bootargs root=/dev/$bdev rw "           \
 756         "console=$consoledev,$baudrate $othbootargs;"   \
 757         "cpu 1 release 0x01000000 - - -;"               \
 758         "cpu 2 release 0x01000000 - - -;"               \
 759         "cpu 3 release 0x01000000 - - -;"               \
 760         "cpu 4 release 0x01000000 - - -;"               \
 761         "cpu 5 release 0x01000000 - - -;"               \
 762         "cpu 6 release 0x01000000 - - -;"               \
 763         "cpu 7 release 0x01000000 - - -;"               \
 764         "go 0x01000000"
 765
 766 #define CONFIG_LINUX                            \
 767         "setenv bootargs root=/dev/ram rw "             \
 768         "console=$consoledev,$baudrate $othbootargs;"   \
 769         "setenv ramdiskaddr 0x02000000;"                \
 770         "setenv fdtaddr 0x00c00000;"                    \
 771         "setenv loadaddr 0x1000000;"                    \
 772         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 773
 774 #define CONFIG_HDBOOT                                   \
 775         "setenv bootargs root=/dev/$bdev rw "           \
 776         "console=$consoledev,$baudrate $othbootargs;"   \
 777         "tftp $loadaddr $bootfile;"                     \
 778         "tftp $fdtaddr $fdtfile;"                       \
 779         "bootm $loadaddr - $fdtaddr"
 780
 781 #define CONFIG_NFSBOOTCOMMAND                   \
 782         "setenv bootargs root=/dev/nfs rw "     \
 783         "nfsroot=$serverip:$rootpath "          \
 784         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 785         "console=$consoledev,$baudrate $othbootargs;"   \
 786         "tftp $loadaddr $bootfile;"             \
 787         "tftp $fdtaddr $fdtfile;"               \
 788         "bootm $loadaddr - $fdtaddr"
 789
 790 #define CONFIG_RAMBOOTCOMMAND                           \
 791         "setenv bootargs root=/dev/ram rw "             \
 792         "console=$consoledev,$baudrate $othbootargs;"   \
 793         "tftp $ramdiskaddr $ramdiskfile;"               \
 794         "tftp $loadaddr $bootfile;"                     \
 795         "tftp $fdtaddr $fdtfile;"                       \
 796         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 797
 798 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 799
 800 #ifdef CONFIG_SECURE_BOOT
 801 #include <asm/fsl_secure_boot.h>
 802 #undef CONFIG_CMD_USB
 803 #endif
 804
 805 #endif  /* __T2080QDS_H */