include/configs/XPEDITE5200.h

   1 /*
   2  * Copyright 2008 Extreme Engineering Solutions, Inc.
   3  * Copyright 2004-2008 Freescale Semiconductor, Inc.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 /*
  25  * xpedite5200 board configuration file
  26  */
  27 #ifndef __CONFIG_H
  28 #define __CONFIG_H
  29
  30 /*
  31  * High Level Configuration Options
  32  */
  33 #define CONFIG_BOOKE            1       /* BOOKE */
  34 #define CONFIG_E500             1       /* BOOKE e500 family */
  35 #define CONFIG_MPC85xx          1       /* MPC8540/60/55/41/48 */
  36 #define CONFIG_MPC8548          1
  37 #define CONFIG_XPEDITE5200      1
  38 #define CONFIG_SYS_BOARD_NAME   "XPedite5200"
  39 #define CONFIG_BOARD_EARLY_INIT_R       /* Call board_pre_init */
  40
  41 #define CONFIG_PCI              1       /* Enable PCI/PCIE */
  42 #define CONFIG_PCI_PNP          1       /* do pci plug-and-play */
  43 #define CONFIG_PCI_SCAN_SHOW    1       /* show pci devices on startup */
  44 #define CONFIG_PCI1             1       /* PCI controller 1 */
  45 #define CONFIG_FSL_PCI_INIT     1       /* Use common FSL init code */
  46 #define CONFIG_SYS_PCI_64BIT    1       /* enable 64-bit PCI resources */
  47 #define CONFIG_FSL_LAW          1       /* Use common FSL init code */
  48
  49 /*
  50  * DDR config
  51  */
  52 #define CONFIG_FSL_DDR2
  53 #undef CONFIG_FSL_DDR_INTERACTIVE
  54 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup */
  55 #define CONFIG_DDR_SPD
  56 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  57 #define SPD_EEPROM_ADDRESS              0x54
  58 #define CONFIG_NUM_DDR_CONTROLLERS      1
  59 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  60 #define CONFIG_CHIP_SELECTS_PER_CTRL    2
  61 #define CONFIG_DDR_ECC
  62 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  63 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
  64 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  65 #define CONFIG_VERY_BIG_RAM
  66
  67 #define CONFIG_SYS_CLK_FREQ     66666666
  68
  69 /*
  70  * These can be toggled for performance analysis, otherwise use default.
  71  */
  72 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
  73 #define CONFIG_BTB                      /* toggle branch predition */
  74 #define CONFIG_ENABLE_36BIT_PHYS        1
  75
  76 /*
  77  * Base addresses -- Note these are effective addresses where the
  78  * actual resources get mapped (not physical addresses)
  79  */
  80 #define CONFIG_SYS_CCSRBAR_DEFAULT      0xff700000      /* CCSRBAR Default */
  81 #define CONFIG_SYS_CCSRBAR              0xef000000      /* relocated CCSRBAR */
  82 #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR      /* physical addr of CCSRBAR */
  83 #define CONFIG_SYS_IMMR         CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR */
  84
  85 /*
  86  * Diagnostics
  87  */
  88 #define CONFIG_SYS_ALT_MEMTEST
  89 #define CONFIG_SYS_MEMTEST_START        0x10000000
  90 #define CONFIG_SYS_MEMTEST_END          0x20000000
  91
  92 /*
  93  * Memory map
  94  * 0x0000_0000  0x7fff_ffff     DDR                     2G Cacheable
  95  * 0x8000_0000  0xbfff_ffff     PCI1 Mem                1G non-cacheable
  96  * 0xe000_0000  0xe7ff_ffff     SRAM/SSRAM/L1 Cache     128M non-cacheable
  97  * 0xe800_0000  0xe87f_ffff     PCI1 IO                 8M non-cacheable
  98  * 0xef00_0000  0xef0f_ffff     CCSR/IMMR               1M non-cacheable
  99  * 0xef80_0000  0xef8f_ffff     NAND Flash              1M non-cacheable
 100  * 0xf800_0000  0xfbff_ffff     NOR Flash 2             64M non-cacheable
 101  * 0xfc00_0000  0xffff_ffff     NOR Flash 1             64M non-cacheable
 102  */
 103
 104 #define CONFIG_SYS_LBC_LCRR     (LCRR_CLKDIV_8 | LCRR_EADC_3)
 105
 106 /*
 107  * NAND flash configuration
 108  */
 109 #define CONFIG_SYS_NAND_BASE            0xef800000
 110 #define CONFIG_SYS_NAND_BASE2           0xef840000 /* Unused at this time */
 111 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 112 #define CONFIG_NAND_ACTL
 113 #define CONFIG_SYS_NAND_ACTL_CLE        (1 << 3)        /* ADDR3 is CLE */
 114 #define CONFIG_SYS_NAND_ACTL_ALE        (1 << 4)        /* ADDR4 is ALE */
 115 #define CONFIG_SYS_NAND_ACTL_NCE        (0)             /* NCE not controlled by ADDR */
 116 #define CONFIG_SYS_NAND_ACTL_DELAY      25
 117
 118 /*
 119  * NOR flash configuration
 120  */
 121 #define CONFIG_SYS_FLASH_BASE           0xfc000000
 122 #define CONFIG_SYS_FLASH_BASE2          0xf8000000
 123 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE2}
 124 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
 125 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 126 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Flash Erase Timeout (ms) */
 127 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Flash Write Timeout (ms) */
 128 #define CONFIG_FLASH_CFI_DRIVER
 129 #define CONFIG_SYS_FLASH_CFI
 130 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 131 #define CONFIG_SYS_FLASH_AUTOPROTECT_LIST       { {0xfff40000, 0xc0000}, \
 132                                                   {0xfbf40000, 0xc0000} }
 133 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE       /* start of monitor */
 134
 135 /*
 136  * Chip select configuration
 137  */
 138 /* NOR Flash 0 on CS0 */
 139 #define CONFIG_SYS_BR0_PRELIM   (CONFIG_SYS_FLASH_BASE  | \
 140                                  BR_PS_16               | \
 141                                  BR_V)
 142 #define CONFIG_SYS_OR0_PRELIM   (OR_AM_64MB             | \
 143                                  OR_GPCM_ACS_DIV4       | \
 144                                  OR_GPCM_SCY_8)
 145
 146 /* NOR Flash 1 on CS1 */
 147 #define CONFIG_SYS_BR1_PRELIM   (CONFIG_SYS_FLASH_BASE2 | \
 148                                  BR_PS_16               | \
 149                                  BR_V)
 150 #define CONFIG_SYS_OR1_PRELIM   CONFIG_SYS_OR0_PRELIM
 151
 152 /* NAND flash on CS2 */
 153 #define CONFIG_SYS_BR2_PRELIM   (CONFIG_SYS_NAND_BASE   | \
 154                                  BR_PS_8                | \
 155                                  BR_V)
 156
 157 /* NAND flash on CS2 */
 158 #define CONFIG_SYS_OR2_PRELIM   (OR_AM_256KB            | \
 159                                  OR_GPCM_BCTLD          | \
 160                                  OR_GPCM_CSNT           | \
 161                                  OR_GPCM_ACS_DIV4       | \
 162                                  OR_GPCM_SCY_4          | \
 163                                  OR_GPCM_TRLX           | \
 164                                  OR_GPCM_EHTR)
 165
 166 /* NAND flash on CS3 */
 167 #define CONFIG_SYS_BR3_PRELIM   (CONFIG_SYS_NAND_BASE2  | \
 168                                  BR_PS_8                | \
 169                                  BR_V)
 170 #define CONFIG_SYS_OR3_PRELIM   CONFIG_SYS_OR2_PRELIM
 171
 172 /*
 173  * Use L1 as initial stack
 174  */
 175 #define CONFIG_SYS_INIT_RAM_LOCK        1
 176 #define CONFIG_SYS_INIT_RAM_ADDR        0xe0000000
 177 #define CONFIG_SYS_INIT_RAM_END         0x4000
 178
 179 #define CONFIG_SYS_GBL_DATA_SIZE        128             /* num bytes initial data */
 180 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 181 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 182
 183 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)    /* Reserve 512 KB for Mon */
 184 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
 185
 186 /*
 187  * Serial Port
 188  */
 189 #define CONFIG_CONS_INDEX               1
 190 #define CONFIG_SYS_NS16550
 191 #define CONFIG_SYS_NS16550_SERIAL
 192 #define CONFIG_SYS_NS16550_REG_SIZE     1
 193 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 194 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 195 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 196 #define CONFIG_SYS_BAUDRATE_TABLE       \
 197         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 198 #define CONFIG_BAUDRATE                 115200
 199 #define CONFIG_LOADS_ECHO               1       /* echo on for serial download */
 200 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 201
 202 /*
 203  * Use the HUSH parser
 204  */
 205 #define CONFIG_SYS_HUSH_PARSER
 206 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
 207
 208 /*
 209  * Pass open firmware flat tree
 210  */
 211 #define CONFIG_OF_LIBFDT                1
 212 #define CONFIG_OF_BOARD_SETUP           1
 213 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
 214
 215 /*
 216  * I2C
 217  */
 218 #define CONFIG_FSL_I2C                          /* Use FSL common I2C driver */
 219 #define CONFIG_HARD_I2C                         /* I2C with hardware support */
 220 #define CONFIG_SYS_I2C_SPEED            400000  /* I2C speed and slave address */
 221 #define CONFIG_SYS_I2C_SLAVE            0x7F
 222 #define CONFIG_SYS_I2C_OFFSET           0x3000
 223 #define CONFIG_SYS_I2C2_OFFSET          0x3100
 224 #define CONFIG_I2C_MULTI_BUS
 225
 226 /* I2C EEPROM */
 227 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
 228 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 229 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       6       /* 64 byte pages */
 230 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10      /* take up to 10 msec */
 231
 232 /* I2C RTC */
 233 #define CONFIG_RTC_M41T11                       1
 234 #define CONFIG_SYS_I2C_RTC_ADDR                 0x68
 235 #define CONFIG_SYS_M41T11_BASE_YEAR             2000
 236
 237 /* GPIO */
 238 #define CONFIG_PCA953X
 239 #define CONFIG_SYS_I2C_PCA953X_ADDR0            0x18
 240 #define CONFIG_SYS_I2C_PCA953X_ADDR1            0x19
 241 #define CONFIG_SYS_I2C_PCA953X_ADDR             CONFIG_SYS_I2C_PCA953X_ADDR0
 242
 243 /* PCA957 @ 0x18 */
 244 #define CONFIG_SYS_PCA953X_BRD_CFG0             0x01
 245 #define CONFIG_SYS_PCA953X_BRD_CFG1             0x02
 246 #define CONFIG_SYS_PCA953X_BRD_CFG2             0x04
 247 #define CONFIG_SYS_PCA953X_XMC_ROOT0            0x08
 248 #define CONFIG_SYS_PCA953X_FLASH_PASS_CS        0x10
 249 #define CONFIG_SYS_PCA953X_FLASH_WP             0x20
 250 #define CONFIG_SYS_PCA953X_MONARCH              0x40
 251 #define CONFIG_SYS_PCA953X_EREADY               0x80
 252
 253 /* PCA957 @ 0x19 */
 254 #define CONFIG_SYS_PCA953X_P14_IO0              0x01
 255 #define CONFIG_SYS_PCA953X_P14_IO1              0x02
 256 #define CONFIG_SYS_PCA953X_P14_IO2              0x04
 257 #define CONFIG_SYS_PCA953X_P14_IO3              0x08
 258 #define CONFIG_SYS_PCA953X_P14_IO4              0x10
 259 #define CONFIG_SYS_PCA953X_P14_IO5              0x20
 260 #define CONFIG_SYS_PCA953X_P14_IO6              0x40
 261 #define CONFIG_SYS_PCA953X_P14_IO7              0x80
 262
 263 /*
 264  * General PCI
 265  * Memory space is mapped 1-1, but I/O space must start from 0.
 266  */
 267 #define CONFIG_SYS_PCI1_MEM_BASE        0x80000000
 268 #define CONFIG_SYS_PCI1_MEM_PHYS        CONFIG_SYS_PCI1_MEM_BASE
 269 #define CONFIG_SYS_PCI1_MEM_SIZE        0x40000000      /* 1G */
 270 #define CONFIG_SYS_PCI1_IO_BASE         0x00000000
 271 #define CONFIG_SYS_PCI1_IO_PHYS         0xe8000000
 272 #define CONFIG_SYS_PCI1_IO_SIZE         0x00800000      /* 1M */
 273
 274 /*
 275  * Networking options
 276  */
 277 #define CONFIG_TSEC_ENET                /* tsec ethernet support */
 278 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
 279 #define CONFIG_NET_MULTI        1
 280 #define CONFIG_MII              1       /* MII PHY management */
 281 #define CONFIG_ETHPRIME         "eTSEC1"
 282
 283 #define CONFIG_TSEC1            1
 284 #define CONFIG_TSEC1_NAME       "eTSEC1"
 285 #define TSEC1_FLAGS             TSEC_GIGABIT
 286 #define TSEC1_PHY_ADDR          1
 287 #define TSEC1_PHYIDX            0
 288 #define CONFIG_HAS_ETH0
 289
 290 #define CONFIG_TSEC2            1
 291 #define CONFIG_TSEC2_NAME       "eTSEC2"
 292 #define TSEC2_FLAGS             TSEC_GIGABIT
 293 #define TSEC2_PHY_ADDR          2
 294 #define TSEC2_PHYIDX            0
 295 #define CONFIG_HAS_ETH1
 296
 297 #define CONFIG_TSEC3    1
 298 #define CONFIG_TSEC3_NAME       "eTSEC3"
 299 #define TSEC3_FLAGS             TSEC_GIGABIT
 300 #define TSEC3_PHY_ADDR          3
 301 #define TSEC3_PHYIDX            0
 302 #define CONFIG_HAS_ETH2
 303
 304 #define CONFIG_TSEC4    1
 305 #define CONFIG_TSEC4_NAME       "eTSEC4"
 306 #define TSEC4_FLAGS             TSEC_GIGABIT
 307 #define TSEC4_PHY_ADDR          4
 308 #define TSEC4_PHYIDX            0
 309 #define CONFIG_HAS_ETH3
 310
 311 /*
 312  * BOOTP options
 313  */
 314 #define CONFIG_BOOTP_BOOTFILESIZE
 315 #define CONFIG_BOOTP_BOOTPATH
 316 #define CONFIG_BOOTP_GATEWAY
 317
 318 /*
 319  * Command configuration.
 320  */
 321 #include <config_cmd_default.h>
 322
 323 #define CONFIG_CMD_ASKENV
 324 #define CONFIG_CMD_DATE
 325 #define CONFIG_CMD_DHCP
 326 #define CONFIG_CMD_EEPROM
 327 #define CONFIG_CMD_ELF
 328 #define CONFIG_CMD_SAVEENV
 329 #define CONFIG_CMD_FLASH
 330 #define CONFIG_CMD_I2C
 331 #define CONFIG_CMD_JFFS2
 332 #define CONFIG_CMD_MII
 333 #define CONFIG_CMD_NAND
 334 #define CONFIG_CMD_NET
 335 #define CONFIG_CMD_PCA953X
 336 #define CONFIG_CMD_PCA953X_INFO
 337 #define CONFIG_CMD_PCI
 338 #define CONFIG_CMD_PING
 339 #define CONFIG_CMD_SNTP
 340 #define CONFIG_CMD_REGINFO
 341
 342 /*
 343  * Miscellaneous configurable options
 344  */
 345 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 346 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 347 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 348 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 349 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 350 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 351 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 352 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1ms ticks */
 353 #define CONFIG_CMDLINE_EDITING  1               /* add command line history     */
 354 #define CONFIG_AUTO_COMPLETE    1               /* add autocompletion support */
 355 #define CONFIG_LOADADDR         0x1000000       /* default location for tftp and bootm */
 356 #define CONFIG_BOOTDELAY        3               /* -1 disables auto-boot */
 357 #define CONFIG_PANIC_HANG                       /* do not reset board on panic */
 358 #define CONFIG_PREBOOT                          /* enable preboot variable */
 359 #define CONFIG_FIT              1
 360 #define CONFIG_FIT_VERBOSE      1
 361 #define CONFIG_INTEGRITY                        /* support booting INTEGRITY OS */
 362 #define CONFIG_INTERRUPTS               /* enable pci, srio, ddr interrupts */
 363
 364 /*
 365  * For booting Linux, the board info and command line data
 366  * have to be in the first 16 MB of memory, since this is
 367  * the maximum mapped by the Linux kernel during initialization.
 368  */
 369 #define CONFIG_SYS_BOOTMAPSZ    (16 << 20)      /* Initial Memory map for Linux*/
 370 #define CONFIG_SYS_BOOTM_LEN    (16 << 20)      /* Increase max gunzip size */
 371
 372 /*
 373  * Boot Flags
 374  */
 375 #define BOOTFLAG_COLD           0x01            /* Normal Power-On: Boot from FLASH */
 376 #define BOOTFLAG_WARM           0x02            /* Software reboot */
 377
 378 /*
 379  * Environment Configuration
 380  */
 381 #define CONFIG_ENV_IS_IN_FLASH  1
 382 #define CONFIG_ENV_SECT_SIZE    0x20000         /* 128k (one sector) for env */
 383 #define CONFIG_ENV_SIZE         0x8000
 384 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - (256 * 1024))
 385
 386 /*
 387  * Flash memory map:
 388  * fff80000 - ffffffff     Pri U-Boot (512 KB)
 389  * fff40000 - fff7ffff     Pri U-Boot Environment (256 KB)
 390  * fff00000 - fff3ffff     Pri FDT (256KB)
 391  * fef00000 - ffefffff     Pri OS image (16MB)
 392  * fc000000 - feefffff     Pri OS Use/Filesystem (47MB)
 393  *
 394  * fbf80000 - fbffffff     Sec U-Boot (512 KB)
 395  * fbf40000 - fbf7ffff     Sec U-Boot Environment (256 KB)
 396  * fbf00000 - fbf3ffff     Sec FDT (256KB)
 397  * faf00000 - fbefffff     Sec OS image (16MB)
 398  * f8000000 - faefffff     Sec OS Use/Filesystem (47MB)
 399  */
 400 #define CONFIG_UBOOT1_ENV_ADDR  MK_STR(0xfff80000)
 401 #define CONFIG_UBOOT2_ENV_ADDR  MK_STR(0xfbf80000)
 402 #define CONFIG_FDT1_ENV_ADDR    MK_STR(0xfff00000)
 403 #define CONFIG_FDT2_ENV_ADDR    MK_STR(0xfbf00000)
 404 #define CONFIG_OS1_ENV_ADDR     MK_STR(0xfef00000)
 405 #define CONFIG_OS2_ENV_ADDR     MK_STR(0xfaf00000)
 406
 407 #define CONFIG_PROG_UBOOT1                                              \
 408         "$download_cmd $loadaddr $ubootfile; "                          \
 409         "if test $? -eq 0; then "                                       \
 410                 "protect off "CONFIG_UBOOT1_ENV_ADDR" +80000; "         \
 411                 "erase "CONFIG_UBOOT1_ENV_ADDR" +80000; "               \
 412                 "cp.w $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 40000; "       \
 413                 "protect on "CONFIG_UBOOT1_ENV_ADDR" +80000; "          \
 414                 "cmp.b $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 80000; "      \
 415                 "if test $? -ne 0; then "                               \
 416                         "echo PROGRAM FAILED; "                         \
 417                 "else; "                                                \
 418                         "echo PROGRAM SUCCEEDED; "                      \
 419                 "fi; "                                                  \
 420         "else; "                                                        \
 421                 "echo DOWNLOAD FAILED; "                                \
 422         "fi;"
 423
 424 #define CONFIG_PROG_UBOOT2                                              \
 425         "$download_cmd $loadaddr $ubootfile; "                          \
 426         "if test $? -eq 0; then "                                       \
 427                 "protect off "CONFIG_UBOOT2_ENV_ADDR" +80000; "         \
 428                 "erase "CONFIG_UBOOT2_ENV_ADDR" +80000; "               \
 429                 "cp.w $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 40000; "       \
 430                 "protect on "CONFIG_UBOOT2_ENV_ADDR" +80000; "          \
 431                 "cmp.b $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 80000; "      \
 432                 "if test $? -ne 0; then "                               \
 433                         "echo PROGRAM FAILED; "                         \
 434                 "else; "                                                \
 435                         "echo PROGRAM SUCCEEDED; "                      \
 436                 "fi; "                                                  \
 437         "else; "                                                        \
 438                 "echo DOWNLOAD FAILED; "                                \
 439         "fi;"
 440
 441 #define CONFIG_BOOT_OS_NET                                              \
 442         "$download_cmd $osaddr $osfile; "                               \
 443         "if test $? -eq 0; then "                                       \
 444                 "if test -n $fdtaddr; then "                            \
 445                         "$download_cmd $fdtaddr $fdtfile; "             \
 446                         "if test $? -eq 0; then "                       \
 447                                 "bootm $osaddr - $fdtaddr; "            \
 448                         "else; "                                        \
 449                                 "echo FDT DOWNLOAD FAILED; "            \
 450                         "fi; "                                          \
 451                 "else; "                                                \
 452                         "bootm $osaddr; "                               \
 453                 "fi; "                                                  \
 454         "else; "                                                        \
 455                 "echo OS DOWNLOAD FAILED; "                             \
 456         "fi;"
 457
 458 #define CONFIG_PROG_OS1                                                 \
 459         "$download_cmd $osaddr $osfile; "                               \
 460         "if test $? -eq 0; then "                                       \
 461                 "erase "CONFIG_OS1_ENV_ADDR" +$filesize; "              \
 462                 "cp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "        \
 463                 "cmp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "       \
 464                 "if test $? -ne 0; then "                               \
 465                         "echo OS PROGRAM FAILED; "                      \
 466                 "else; "                                                \
 467                         "echo OS PROGRAM SUCCEEDED; "                   \
 468                 "fi; "                                                  \
 469         "else; "                                                        \
 470                 "echo OS DOWNLOAD FAILED; "                             \
 471         "fi;"
 472
 473 #define CONFIG_PROG_OS2                                                 \
 474         "$download_cmd $osaddr $osfile; "                               \
 475         "if test $? -eq 0; then "                                       \
 476                 "erase "CONFIG_OS2_ENV_ADDR" +$filesize; "              \
 477                 "cp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "        \
 478                 "cmp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "       \
 479                 "if test $? -ne 0; then "                               \
 480                         "echo OS PROGRAM FAILED; "                      \
 481                 "else; "                                                \
 482                         "echo OS PROGRAM SUCCEEDED; "                   \
 483                 "fi; "                                                  \
 484         "else; "                                                        \
 485                 "echo OS DOWNLOAD FAILED; "                             \
 486         "fi;"
 487
 488 #define CONFIG_PROG_FDT1                                                \
 489         "$download_cmd $fdtaddr $fdtfile; "                             \
 490         "if test $? -eq 0; then "                                       \
 491                 "erase "CONFIG_FDT1_ENV_ADDR" +$filesize;"              \
 492                 "cp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "      \
 493                 "cmp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "     \
 494                 "if test $? -ne 0; then "                               \
 495                         "echo FDT PROGRAM FAILED; "                     \
 496                 "else; "                                                \
 497                         "echo FDT PROGRAM SUCCEEDED; "                  \
 498                 "fi; "                                                  \
 499         "else; "                                                        \
 500                 "echo FDT DOWNLOAD FAILED; "                            \
 501         "fi;"
 502
 503 #define CONFIG_PROG_FDT2                                                \
 504         "$download_cmd $fdtaddr $fdtfile; "                             \
 505         "if test $? -eq 0; then "                                       \
 506                 "erase "CONFIG_FDT2_ENV_ADDR" +$filesize;"              \
 507                 "cp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "      \
 508                 "cmp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "     \
 509                 "if test $? -ne 0; then "                               \
 510                         "echo FDT PROGRAM FAILED; "                     \
 511                 "else; "                                                \
 512                         "echo FDT PROGRAM SUCCEEDED; "                  \
 513                 "fi; "                                                  \
 514         "else; "                                                        \
 515                 "echo FDT DOWNLOAD FAILED; "                            \
 516         "fi;"
 517
 518 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 519         "autoload=yes\0"                                                \
 520         "download_cmd=tftp\0"                                           \
 521         "console_args=console=ttyS0,115200\0"                           \
 522         "root_args=root=/dev/nfs rw\0"                                  \
 523         "misc_args=ip=on\0"                                             \
 524         "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
 525         "bootfile=/home/user/file\0"                                    \
 526         "osfile=/home/user/uImage-XPedite5200\0"                        \
 527         "fdtfile=/home/user/xpedite5200.dtb\0"                          \
 528         "ubootfile=/home/user/u-boot.bin\0"                             \
 529         "fdtaddr=c00000\0"                                              \
 530         "osaddr=0x1000000\0"                                            \
 531         "loadaddr=0x1000000\0"                                          \
 532         "prog_uboot1="CONFIG_PROG_UBOOT1"\0"                            \
 533         "prog_uboot2="CONFIG_PROG_UBOOT2"\0"                            \
 534         "prog_os1="CONFIG_PROG_OS1"\0"                                  \
 535         "prog_os2="CONFIG_PROG_OS2"\0"                                  \
 536         "prog_fdt1="CONFIG_PROG_FDT1"\0"                                \
 537         "prog_fdt2="CONFIG_PROG_FDT2"\0"                                \
 538         "bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0"          \
 539         "bootcmd_flash1=run set_bootargs; "                             \
 540                 "bootm "CONFIG_OS1_ENV_ADDR" - "CONFIG_FDT1_ENV_ADDR"\0"\
 541         "bootcmd_flash2=run set_bootargs; "                             \
 542                 "bootm "CONFIG_OS2_ENV_ADDR" - "CONFIG_FDT2_ENV_ADDR"\0"\
 543         "bootcmd=run bootcmd_flash1\0"
 544 #endif  /* __CONFIG_H */