include/configs/adp-ag101.h

   1 /*
   2  * Copyright (C) 2011 Andes Technology Corporation
   3  * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
   4  * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include <asm/arch-ag101/ag101.h>
  13
  14 /*
  15  * CPU and Board Configuration Options
  16  */
  17 #define CONFIG_ADP_AG101
  18
  19 #define CONFIG_USE_INTERRUPT
  20
  21 #define CONFIG_SKIP_LOWLEVEL_INIT
  22
  23 /*
  24  * Definitions related to passing arguments to kernel.
  25  */
  26 #define CONFIG_CMDLINE_TAG                      /* send commandline to Kernel */
  27 #define CONFIG_SETUP_MEMORY_TAGS        /* send memory definition to kernel */
  28 #define CONFIG_INITRD_TAG                       /* send initrd params */
  29
  30 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
  31 #define CONFIG_MEM_REMAP
  32 #endif
  33
  34 #ifdef CONFIG_SKIP_LOWLEVEL_INIT
  35 #define CONFIG_SYS_TEXT_BASE    0x03200000
  36 #else
  37 #define CONFIG_SYS_TEXT_BASE    0x00000000
  38 #endif
  39
  40 /*
  41  * Timer
  42  */
  43 #define CONFIG_SYS_CLK_FREQ     48000000
  44 #define VERSION_CLOCK           CONFIG_SYS_CLK_FREQ
  45
  46 /*
  47  * Use Externel CLOCK or PCLK
  48  */
  49 #undef CONFIG_FTRTC010_EXTCLK
  50
  51 #ifndef CONFIG_FTRTC010_EXTCLK
  52 #define CONFIG_FTRTC010_PCLK
  53 #endif
  54
  55 #ifdef CONFIG_FTRTC010_EXTCLK
  56 #define TIMER_CLOCK     32768                   /* CONFIG_FTRTC010_EXTCLK */
  57 #else
  58 #define TIMER_CLOCK     CONFIG_SYS_HZ           /* CONFIG_FTRTC010_PCLK */
  59 #endif
  60
  61 #define TIMER_LOAD_VAL  0xffffffff
  62
  63 /*
  64  * Real Time Clock
  65  */
  66 #define CONFIG_RTC_FTRTC010
  67
  68 /*
  69  * Real Time Clock Divider
  70  * RTC_DIV_COUNT                        (OSC_CLK/OSC_5MHZ)
  71  */
  72 #define OSC_5MHZ                        (5*1000000)
  73 #define OSC_CLK                         (2*OSC_5MHZ)
  74 #define RTC_DIV_COUNT                   (OSC_CLK/OSC_5MHZ)
  75
  76 /*
  77  * Serial console configuration
  78  */
  79
  80 /* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */
  81 #define CONFIG_BAUDRATE                 38400
  82 #define CONFIG_CONS_INDEX               1
  83 #define CONFIG_SYS_NS16550
  84 #define CONFIG_SYS_NS16550_SERIAL
  85 #define CONFIG_SYS_NS16550_COM1         CONFIG_FTUART010_02_BASE
  86 #define CONFIG_SYS_NS16550_REG_SIZE     -4
  87 #define CONFIG_SYS_NS16550_CLK          ((46080000 * 20) / 25)  /* AG101 */
  88
  89 /*
  90  * Ethernet
  91  */
  92 #define CONFIG_FTMAC100
  93
  94 #define CONFIG_BOOTDELAY        3
  95
  96 /*
  97  * SD (MMC) controller
  98  */
  99 #define CONFIG_MMC
 100 #define CONFIG_CMD_MMC
 101 #define CONFIG_GENERIC_MMC
 102 #define CONFIG_DOS_PARTITION
 103 #define CONFIG_FTSDC010
 104 #define CONFIG_FTSDC010_NUMBER          1
 105 #define CONFIG_FTSDC010_SDIO
 106 #define CONFIG_CMD_FAT
 107 #define CONFIG_CMD_EXT2
 108
 109 /*
 110  * Command line configuration.
 111  */
 112 #define CONFIG_CMD_CACHE
 113 #define CONFIG_CMD_DATE
 114 #define CONFIG_CMD_PING
 115
 116 /*
 117  * Miscellaneous configurable options
 118  */
 119 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 120 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 121
 122 /* Print Buffer Size */
 123 #define CONFIG_SYS_PBSIZE       \
 124         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 125
 126 /* max number of command args */
 127 #define CONFIG_SYS_MAXARGS      16
 128
 129 /* Boot Argument Buffer Size */
 130 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 131
 132 /*
 133  * Size of malloc() pool
 134  */
 135 /* 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough */
 136 #define CONFIG_SYS_MALLOC_LEN           (512 << 10)
 137
 138 /*
 139  * AHB Controller configuration
 140  */
 141 #define CONFIG_FTAHBC020S
 142
 143 #ifdef CONFIG_FTAHBC020S
 144 #include <faraday/ftahbc020s.h>
 145
 146 /* Address of PHYS_SDRAM_0 before memory remap is at 0x(100)00000 */
 147 #define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE    0x100
 148
 149 /*
 150  * CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6: this define is used in lowlevel_init.S,
 151  * hence we cannot use FTAHBC020S_BSR_SIZE(2048) since it will use ffs() wrote
 152  * in C language.
 153  */
 154 #define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6 \
 155         (FTAHBC020S_SLAVE_BSR_BASE(CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE) | \
 156                                         FTAHBC020S_SLAVE_BSR_SIZE(0xb))
 157 #endif
 158
 159 /*
 160  * Watchdog
 161  */
 162 #define CONFIG_FTWDT010_WATCHDOG
 163
 164 /*
 165  * PMU Power controller configuration
 166  */
 167 #define CONFIG_PMU
 168 #define CONFIG_FTPMU010_POWER
 169
 170 #ifdef CONFIG_FTPMU010_POWER
 171 #include <faraday/ftpmu010.h>
 172 #define CONFIG_SYS_FTPMU010_PDLLCR0_HCLKOUTDIS          0x0E
 173 #define CONFIG_SYS_FTPMU010_SDRAMHTC    (FTPMU010_SDRAMHTC_EBICTRL_DCSR  | \
 174                                          FTPMU010_SDRAMHTC_EBIDATA_DCSR  | \
 175                                          FTPMU010_SDRAMHTC_SDRAMCS_DCSR  | \
 176                                          FTPMU010_SDRAMHTC_SDRAMCTL_DCSR | \
 177                                          FTPMU010_SDRAMHTC_CKE_DCSR      | \
 178                                          FTPMU010_SDRAMHTC_DQM_DCSR      | \
 179                                          FTPMU010_SDRAMHTC_SDCLK_DCSR)
 180 #endif
 181
 182 /*
 183  * SDRAM controller configuration
 184  */
 185 #define CONFIG_FTSDMC021
 186
 187 #ifdef CONFIG_FTSDMC021
 188 #include <faraday/ftsdmc021.h>
 189
 190 #define CONFIG_SYS_FTSDMC021_TP1        (FTSDMC021_TP1_TRP(1)   |       \
 191                                          FTSDMC021_TP1_TRCD(1)  |       \
 192                                          FTSDMC021_TP1_TRF(3)   |       \
 193                                          FTSDMC021_TP1_TWR(1)   |       \
 194                                          FTSDMC021_TP1_TCL(2))
 195
 196 #define CONFIG_SYS_FTSDMC021_TP2        (FTSDMC021_TP2_INI_PREC(4) |    \
 197                                          FTSDMC021_TP2_INI_REFT(8) |    \
 198                                          FTSDMC021_TP2_REF_INTV(0x180))
 199
 200 /*
 201  * CONFIG_SYS_FTSDMC021_CR1: this define is used in lowlevel_init.S,
 202  * hence we cannot use FTSDMC021_BANK_SIZE(64) since it will use ffs() wrote in
 203  * C language.
 204  */
 205 #define CONFIG_SYS_FTSDMC021_CR1        (FTSDMC021_CR1_DDW(2)    |      \
 206                                          FTSDMC021_CR1_DSZ(3)    |      \
 207                                          FTSDMC021_CR1_MBW(2)    |      \
 208                                          FTSDMC021_CR1_BNKSIZE(6))
 209
 210 #define CONFIG_SYS_FTSDMC021_CR2        (FTSDMC021_CR2_IPREC     |      \
 211                                          FTSDMC021_CR2_IREF      |      \
 212                                          FTSDMC021_CR2_ISMR)
 213
 214 #define CONFIG_SYS_FTSDMC021_BANK0_BASE CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE
 215 #define CONFIG_SYS_FTSDMC021_BANK0_BSR  (FTSDMC021_BANK_ENABLE   |      \
 216                                          CONFIG_SYS_FTSDMC021_BANK0_BASE)
 217
 218 #define CONFIG_SYS_FTSDMC021_BANK1_BASE \
 219         (CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE + (PHYS_SDRAM_0_SIZE >> 20))
 220 #define CONFIG_SYS_FTSDMC021_BANK1_BSR (FTSDMC021_BANK_ENABLE   |      \
 221                 CONFIG_SYS_FTSDMC021_BANK1_BASE)
 222
 223 #endif
 224
 225 /*
 226  * Physical Memory Map
 227  */
 228 #if defined(CONFIG_MEM_REMAP) || defined(CONFIG_SKIP_LOWLEVEL_INIT)
 229 #define PHYS_SDRAM_0            0x00000000      /* SDRAM Bank #1 */
 230 #if defined(CONFIG_MEM_REMAP)
 231 #define PHYS_SDRAM_0_AT_INIT    0x10000000      /* SDRAM Bank #1 before remap*/
 232 #endif
 233 #else   /* !CONFIG_SKIP_LOWLEVEL_INIT && !CONFIG_MEM_REMAP */
 234 #define PHYS_SDRAM_0            0x10000000      /* SDRAM Bank #1 */
 235 #endif
 236 #define PHYS_SDRAM_1 \
 237         (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE)      /* SDRAM Bank #2 */
 238
 239 #define CONFIG_NR_DRAM_BANKS    2               /* we have 2 bank of DRAM */
 240 #define PHYS_SDRAM_0_SIZE       0x04000000      /* 64 MB */
 241 #define PHYS_SDRAM_1_SIZE       0x04000000      /* 64 MB */
 242
 243 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_0
 244
 245 #ifdef CONFIG_MEM_REMAP
 246 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \
 247                                         GENERATED_GBL_DATA_SIZE)
 248 #else
 249 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
 250                                         GENERATED_GBL_DATA_SIZE)
 251 #endif /* CONFIG_MEM_REMAP */
 252
 253 /*
 254  * Load address and memory test area should agree with
 255  * arch/nds32/config.mk. Be careful not to overwrite U-boot itself.
 256  */
 257 #define CONFIG_SYS_LOAD_ADDR            0x300000
 258
 259 /* memtest works on 63 MB in DRAM */
 260 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM_0
 261 #define CONFIG_SYS_MEMTEST_END          (PHYS_SDRAM_0 + 0x03F00000)
 262
 263 /*
 264  * Static memory controller configuration
 265  */
 266 #define CONFIG_FTSMC020
 267
 268 #ifdef CONFIG_FTSMC020
 269 #include <faraday/ftsmc020.h>
 270
 271 #ifdef CONFIG_SKIP_LOWLEVEL_INIT
 272 #define CONFIG_SYS_FTSMC020_CONFIGS     {                       \
 273         { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, },      \
 274         { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, },      \
 275 }
 276 #else
 277 #define CONFIG_SYS_FTSMC020_CONFIGS     {                       \
 278         { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, },      \
 279 }
 280 #endif
 281
 282 /*
 283  * There are 2 bank connected to FTSMC020 on ADP-AG101.
 284  * You can use jumper and switch to force it booted from ROM or FLASH.
 285  * MA17: Lo, SW5 = "0101": BANK0: ROM, BANK1: FLASH.
 286  * MA17: Hi, SW5 = "1010": BANK0: FLASH; ROM is disabled.
 287  */
 288 #ifndef CONFIG_SKIP_LOWLEVEL_INIT       /* FLASH is on BANK 0 */
 289 #define FTSMC020_BANK0_LOWLV_CONFIG     (FTSMC020_BANK_ENABLE   |       \
 290                                          FTSMC020_BANK_SIZE_32M |       \
 291                                          FTSMC020_BANK_MBW_32)
 292
 293 #define FTSMC020_BANK0_LOWLV_TIMING     (FTSMC020_TPR_RBE       |       \
 294                                          FTSMC020_TPR_AST(1)    |       \
 295                                          FTSMC020_TPR_CTW(1)    |       \
 296                                          FTSMC020_TPR_ATI(1)    |       \
 297                                          FTSMC020_TPR_AT2(1)    |       \
 298                                          FTSMC020_TPR_WTC(1)    |       \
 299                                          FTSMC020_TPR_AHT(1)    |       \
 300                                          FTSMC020_TPR_TRNA(1))
 301 #endif
 302
 303 /*
 304  * This FTSMC020_BANK0_CONFIG indecates the setting of BANK0.
 305  * 1. When CONFIG_SKIP_LOWLEVEL_INIT is enabled, BANK0 is EEPROM,
 306  *    Do NOT enable BANK0 in FTSMC020_BANK0_CONFIG under this condition.
 307  * 2. When CONFIG_SKIP_LOWLEVEL_INIT is undefined, BANK0 is FLASH.
 308  */
 309 #define FTSMC020_BANK0_CONFIG   (FTSMC020_BANK_SIZE_32M           |     \
 310                                  FTSMC020_BANK_MBW_32)
 311
 312 #define FTSMC020_BANK0_TIMING   (FTSMC020_TPR_RBE      |        \
 313                                  FTSMC020_TPR_AST(3)   |        \
 314                                  FTSMC020_TPR_CTW(3)   |        \
 315                                  FTSMC020_TPR_ATI(0xf) |        \
 316                                  FTSMC020_TPR_AT2(3)   |        \
 317                                  FTSMC020_TPR_WTC(3)   |        \
 318                                  FTSMC020_TPR_AHT(3)   |        \
 319                                  FTSMC020_TPR_TRNA(0xf))
 320
 321 #define FTSMC020_BANK1_CONFIG   (FTSMC020_BANK_ENABLE   |       \
 322                                  FTSMC020_BANK_BASE(PHYS_FLASH_1) |     \
 323                                  FTSMC020_BANK_SIZE_32M |       \
 324                                  FTSMC020_BANK_MBW_32)
 325
 326 #define FTSMC020_BANK1_TIMING   (FTSMC020_TPR_RBE       |       \
 327                                  FTSMC020_TPR_AST(1)    |       \
 328                                  FTSMC020_TPR_CTW(1)    |       \
 329                                  FTSMC020_TPR_ATI(1)    |       \
 330                                  FTSMC020_TPR_AT2(1)    |       \
 331                                  FTSMC020_TPR_WTC(1)    |       \
 332                                  FTSMC020_TPR_AHT(1)    |       \
 333                                  FTSMC020_TPR_TRNA(1))
 334 #endif /* CONFIG_FTSMC020 */
 335
 336 /*
 337  * FLASH and environment organization
 338  */
 339 /* use CFI framework */
 340 #define CONFIG_SYS_FLASH_CFI
 341 #define CONFIG_FLASH_CFI_DRIVER
 342
 343 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
 344 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 345
 346 /* support JEDEC */
 347
 348 /* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */
 349 #ifdef CONFIG_SKIP_LOWLEVEL_INIT
 350 #define PHYS_FLASH_1                    0x80400000      /* BANK 1 */
 351 #else   /* !CONFIG_SKIP_LOWLEVEL_INIT */
 352 #ifdef CONFIG_MEM_REMAP
 353 #define PHYS_FLASH_1                    0x80000000      /* BANK 0 */
 354 #else
 355 #define PHYS_FLASH_1                    0x00000000      /* BANK 0 */
 356 #endif  /* CONFIG_MEM_REMAP */
 357 #endif  /* CONFIG_SKIP_LOWLEVEL_INIT */
 358
 359 #define CONFIG_SYS_FLASH_BASE           PHYS_FLASH_1
 360 #define CONFIG_SYS_FLASH_BANKS_LIST     { PHYS_FLASH_1, }
 361 #define CONFIG_SYS_MONITOR_BASE         PHYS_FLASH_1
 362
 363 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* TO for Flash Erase (ms) */
 364 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* TO for Flash Write (ms) */
 365
 366 /* max number of memory banks */
 367 /*
 368  * There are 4 banks supported for this Controller,
 369  * but we have only 1 bank connected to flash on board
 370  */
 371 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 372
 373 /* max number of sectors on one chip */
 374 #define CONFIG_FLASH_SECTOR_SIZE        (0x10000*2*2)
 375 #define CONFIG_ENV_SECT_SIZE            CONFIG_FLASH_SECTOR_SIZE
 376 #define CONFIG_SYS_MAX_FLASH_SECT       128
 377
 378 /* environments */
 379 #define CONFIG_ENV_IS_IN_FLASH
 380 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_MONITOR_BASE + 0x40000)
 381 #define CONFIG_ENV_SIZE                 8192
 382 #define CONFIG_ENV_OVERWRITE
 383
 384 #endif  /* __CONFIG_H */