include/configs/adp-ag101p.h

   1 /*
   2  * Copyright (C) 2011 Andes Technology Corporation
   3  * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
   4  * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
   5  *
   6  * See file CREDITS for list of people who contributed to this
   7  * project.
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License as published by
  11  * the Free Software Foundation; either version 2 of the License, or
  12  * (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  22  */
  23
  24 #ifndef __CONFIG_H
  25 #define __CONFIG_H
  26
  27 #include <asm/arch/ag101.h>
  28
  29 /*
  30  * CPU and Board Configuration Options
  31  */
  32 #define CONFIG_ADP_AG101P
  33
  34 #define CONFIG_USE_INTERRUPT
  35
  36 #define CONFIG_SKIP_LOWLEVEL_INIT
  37
  38 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
  39 #define CONFIG_MEM_REMAP
  40 #endif
  41
  42 #ifdef CONFIG_SKIP_LOWLEVEL_INIT
  43 #define CONFIG_SYS_TEXT_BASE    0x03200000
  44 #else
  45 #define CONFIG_SYS_TEXT_BASE    0x00000000
  46 #endif
  47
  48 /*
  49  * Timer
  50  */
  51
  52 /*
  53  * According to the discussion in u-boot mailing list before,
  54  * CONFIG_SYS_HZ at 1000 is mandatory.
  55  */
  56 #define CONFIG_SYS_HZ           1000
  57 #define CONFIG_SYS_CLK_FREQ     39062500
  58 #define VERSION_CLOCK           CONFIG_SYS_CLK_FREQ
  59
  60 /*
  61  * Use Externel CLOCK or PCLK
  62  */
  63 #undef CONFIG_FTRTC010_EXTCLK
  64
  65 #ifndef CONFIG_FTRTC010_EXTCLK
  66 #define CONFIG_FTRTC010_PCLK
  67 #endif
  68
  69 #ifdef CONFIG_FTRTC010_EXTCLK
  70 #define TIMER_CLOCK     32768                   /* CONFIG_FTRTC010_EXTCLK */
  71 #else
  72 #define TIMER_CLOCK     CONFIG_SYS_HZ           /* CONFIG_FTRTC010_PCLK */
  73 #endif
  74
  75 #define TIMER_LOAD_VAL  0xffffffff
  76
  77 /*
  78  * Real Time Clock
  79  */
  80 #define CONFIG_RTC_FTRTC010
  81
  82 /*
  83  * Real Time Clock Divider
  84  * RTC_DIV_COUNT                        (OSC_CLK/OSC_5MHZ)
  85  */
  86 #define OSC_5MHZ                        (5*1000000)
  87 #define OSC_CLK                         (4*OSC_5MHZ)
  88 #define RTC_DIV_COUNT                   (0.5)   /* Why?? */
  89
  90 /*
  91  * Serial console configuration
  92  */
  93
  94 /* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */
  95 #define CONFIG_BAUDRATE                 38400
  96 #define CONFIG_CONS_INDEX               1
  97 #define CONFIG_SYS_NS16550
  98 #define CONFIG_SYS_NS16550_SERIAL
  99 #define CONFIG_SYS_NS16550_COM1         CONFIG_FTUART010_02_BASE
 100 #define CONFIG_SYS_NS16550_REG_SIZE     -4
 101 #define CONFIG_SYS_NS16550_CLK          ((18432000 * 20) / 25)  /* AG101P */
 102
 103 /*
 104  * Ethernet
 105  */
 106 #define CONFIG_FTMAC100
 107
 108 #define CONFIG_BOOTDELAY        3
 109
 110 /*
 111  * SD (MMC) controller
 112  */
 113 #define CONFIG_MMC
 114 #define CONFIG_CMD_MMC
 115 #define CONFIG_GENERIC_MMC
 116 #define CONFIG_DOS_PARTITION
 117 #define CONFIG_FTSDC010
 118 #define CONFIG_FTSDC010_NUMBER          1
 119 #define CONFIG_CMD_FAT
 120
 121 /*
 122  * Command line configuration.
 123  */
 124 #include <config_cmd_default.h>
 125
 126 #define CONFIG_CMD_CACHE
 127 #define CONFIG_CMD_DATE
 128 #define CONFIG_CMD_PING
 129
 130 /*
 131  * Miscellaneous configurable options
 132  */
 133 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 134 #define CONFIG_SYS_PROMPT       "NDS32 # "      /* Monitor Command Prompt */
 135 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 136
 137 /* Print Buffer Size */
 138 #define CONFIG_SYS_PBSIZE       \
 139         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 140
 141 /* max number of command args */
 142 #define CONFIG_SYS_MAXARGS      16
 143
 144 /* Boot Argument Buffer Size */
 145 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 146
 147 /*
 148  * Size of malloc() pool
 149  */
 150 /* 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough */
 151 #define CONFIG_SYS_MALLOC_LEN           (512 << 10)
 152
 153 /*
 154  * size in bytes reserved for initial data
 155  */
 156 #define CONFIG_SYS_GBL_DATA_SIZE        128
 157
 158 /*
 159  * AHB Controller configuration
 160  */
 161 #define CONFIG_FTAHBC020S
 162
 163 #ifdef CONFIG_FTAHBC020S
 164 #include <faraday/ftahbc020s.h>
 165
 166 /* Address of PHYS_SDRAM_0 before memory remap is at 0x(100)00000 */
 167 #define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE    0x100
 168
 169 /*
 170  * CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6: this define is used in lowlevel_init.S,
 171  * hence we cannot use FTAHBC020S_BSR_SIZE(2048) since it will use ffs() wrote
 172  * in C language.
 173  */
 174 #define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6 \
 175         (FTAHBC020S_SLAVE_BSR_BASE(CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE) | \
 176                                         FTAHBC020S_SLAVE_BSR_SIZE(0xb))
 177 #endif
 178
 179 /*
 180  * Watchdog
 181  */
 182 #define CONFIG_FTWDT010_WATCHDOG
 183
 184 /*
 185  * PMU Power controller configuration
 186  */
 187 #define CONFIG_PMU
 188 #define CONFIG_FTPMU010_POWER
 189
 190 #ifdef CONFIG_FTPMU010_POWER
 191 #include <faraday/ftpmu010.h>
 192 #define CONFIG_SYS_FTPMU010_PDLLCR0_HCLKOUTDIS          0x0E
 193 #define CONFIG_SYS_FTPMU010_SDRAMHTC    (FTPMU010_SDRAMHTC_EBICTRL_DCSR  | \
 194                                          FTPMU010_SDRAMHTC_EBIDATA_DCSR  | \
 195                                          FTPMU010_SDRAMHTC_SDRAMCS_DCSR  | \
 196                                          FTPMU010_SDRAMHTC_SDRAMCTL_DCSR | \
 197                                          FTPMU010_SDRAMHTC_CKE_DCSR      | \
 198                                          FTPMU010_SDRAMHTC_DQM_DCSR      | \
 199                                          FTPMU010_SDRAMHTC_SDCLK_DCSR)
 200 #endif
 201
 202 /*
 203  * SDRAM controller configuration
 204  */
 205 #define CONFIG_FTSDMC021
 206
 207 #ifdef CONFIG_FTSDMC021
 208 #include <faraday/ftsdmc021.h>
 209
 210 #define CONFIG_SYS_FTSDMC021_TP1        (FTSDMC021_TP1_TRAS(2)  |       \
 211                                          FTSDMC021_TP1_TRP(1)   |       \
 212                                          FTSDMC021_TP1_TRCD(1)  |       \
 213                                          FTSDMC021_TP1_TRF(3)   |       \
 214                                          FTSDMC021_TP1_TWR(1)   |       \
 215                                          FTSDMC021_TP1_TCL(2))
 216
 217 #define CONFIG_SYS_FTSDMC021_TP2        (FTSDMC021_TP2_INI_PREC(4) |    \
 218                                          FTSDMC021_TP2_INI_REFT(8) |    \
 219                                          FTSDMC021_TP2_REF_INTV(0x180))
 220
 221 /*
 222  * CONFIG_SYS_FTSDMC021_CR1: this define is used in lowlevel_init.S,
 223  * hence we cannot use FTSDMC021_BANK_SIZE(64) since it will use ffs() wrote in
 224  * C language.
 225  */
 226 #define CONFIG_SYS_FTSDMC021_CR1        (FTSDMC021_CR1_DDW(2)    |      \
 227                                          FTSDMC021_CR1_DSZ(3)    |      \
 228                                          FTSDMC021_CR1_MBW(2)    |      \
 229                                          FTSDMC021_CR1_BNKSIZE(6))
 230
 231 #define CONFIG_SYS_FTSDMC021_CR2        (FTSDMC021_CR2_IPREC     |      \
 232                                          FTSDMC021_CR2_IREF      |      \
 233                                          FTSDMC021_CR2_ISMR)
 234
 235 #define CONFIG_SYS_FTSDMC021_BANK0_BASE CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE
 236 #define CONFIG_SYS_FTSDMC021_BANK0_BSR  (FTSDMC021_BANK_ENABLE   |      \
 237                                          CONFIG_SYS_FTSDMC021_BANK0_BASE)
 238
 239 #endif
 240
 241 /*
 242  * Physical Memory Map
 243  */
 244 #if defined(CONFIG_MEM_REMAP) || defined(CONFIG_SKIP_LOWLEVEL_INIT)
 245 #define PHYS_SDRAM_0            0x00000000      /* SDRAM Bank #1 */
 246 #if defined(CONFIG_MEM_REMAP)
 247 #define PHYS_SDRAM_0_AT_INIT    0x10000000      /* SDRAM Bank #1 before remap*/
 248 #endif
 249 #else   /* !CONFIG_SKIP_LOWLEVEL_INIT && !CONFIG_MEM_REMAP */
 250 #define PHYS_SDRAM_0            0x10000000      /* SDRAM Bank #1 */
 251 #endif
 252
 253 #define CONFIG_NR_DRAM_BANKS    1               /* we have 1 bank of DRAM */
 254 #define PHYS_SDRAM_0_SIZE       0x04000000      /* 64 MB */
 255
 256 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_0
 257
 258 #ifdef CONFIG_MEM_REMAP
 259 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \
 260                                         GENERATED_GBL_DATA_SIZE)
 261 #else
 262 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
 263                                         GENERATED_GBL_DATA_SIZE)
 264 #endif /* CONFIG_MEM_REMAP */
 265
 266 /*
 267  * Load address and memory test area should agree with
 268  * arch/nds32/config.mk. Be careful not to overwrite U-boot itself.
 269  */
 270 #define CONFIG_SYS_LOAD_ADDR            0x300000
 271
 272 /* memtest works on 63 MB in DRAM */
 273 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM_0
 274 #define CONFIG_SYS_MEMTEST_END          (PHYS_SDRAM_0 + 0x03F00000)
 275
 276 /*
 277  * Static memory controller configuration
 278  */
 279 #define CONFIG_FTSMC020
 280
 281 #ifdef CONFIG_FTSMC020
 282 #include <faraday/ftsmc020.h>
 283
 284 #define CONFIG_SYS_FTSMC020_CONFIGS     {                       \
 285         { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, },      \
 286         { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, },      \
 287 }
 288
 289 #ifndef CONFIG_SKIP_LOWLEVEL_INIT       /* FLASH is on BANK 0 */
 290 #define FTSMC020_BANK0_LOWLV_CONFIG     (FTSMC020_BANK_ENABLE   |       \
 291                                          FTSMC020_BANK_SIZE_32M |       \
 292                                          FTSMC020_BANK_MBW_32)
 293
 294 #define FTSMC020_BANK0_LOWLV_TIMING     (FTSMC020_TPR_RBE       |       \
 295                                          FTSMC020_TPR_AST(1)    |       \
 296                                          FTSMC020_TPR_CTW(1)    |       \
 297                                          FTSMC020_TPR_ATI(1)    |       \
 298                                          FTSMC020_TPR_AT2(1)    |       \
 299                                          FTSMC020_TPR_WTC(1)    |       \
 300                                          FTSMC020_TPR_AHT(1)    |       \
 301                                          FTSMC020_TPR_TRNA(1))
 302 #endif
 303
 304 /*
 305  * FLASH on ADP_AG101P is connected to BANK0
 306  * Just disalbe the other BANK to avoid detection error.
 307  */
 308 #define FTSMC020_BANK0_CONFIG   (FTSMC020_BANK_ENABLE             |     \
 309                                  FTSMC020_BANK_BASE(PHYS_FLASH_1) |     \
 310                                  FTSMC020_BANK_SIZE_32M           |     \
 311                                  FTSMC020_BANK_MBW_32)
 312
 313 #define FTSMC020_BANK0_TIMING   (FTSMC020_TPR_AST(3)   |        \
 314                                  FTSMC020_TPR_CTW(3)   |        \
 315                                  FTSMC020_TPR_ATI(0xf) |        \
 316                                  FTSMC020_TPR_AT2(3)   |        \
 317                                  FTSMC020_TPR_WTC(3)   |        \
 318                                  FTSMC020_TPR_AHT(3)   |        \
 319                                  FTSMC020_TPR_TRNA(0xf))
 320
 321 #define FTSMC020_BANK1_CONFIG   (0x00)
 322 #define FTSMC020_BANK1_TIMING   (0x00)
 323 #endif /* CONFIG_FTSMC020 */
 324
 325 /*
 326  * FLASH and environment organization
 327  */
 328 /* use CFI framework */
 329 #define CONFIG_SYS_FLASH_CFI
 330 #define CONFIG_FLASH_CFI_DRIVER
 331
 332 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
 333 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 334
 335 /* support JEDEC */
 336
 337 /* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */
 338 #ifdef CONFIG_SKIP_LOWLEVEL_INIT
 339 #define PHYS_FLASH_1                    0x80400000      /* BANK 1 */
 340 #else   /* !CONFIG_SKIP_LOWLEVEL_INIT */
 341 #ifdef CONFIG_MEM_REMAP
 342 #define PHYS_FLASH_1                    0x80000000      /* BANK 0 */
 343 #else
 344 #define PHYS_FLASH_1                    0x00000000      /* BANK 0 */
 345 #endif  /* CONFIG_MEM_REMAP */
 346 #endif  /* CONFIG_SKIP_LOWLEVEL_INIT */
 347
 348 #define CONFIG_SYS_FLASH_BASE           PHYS_FLASH_1
 349 #define CONFIG_SYS_FLASH_BANKS_LIST     { PHYS_FLASH_1, }
 350 #define CONFIG_SYS_MONITOR_BASE         PHYS_FLASH_1
 351
 352 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* TO for Flash Erase (ms) */
 353 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* TO for Flash Write (ms) */
 354
 355 /* max number of memory banks */
 356 /*
 357  * There are 4 banks supported for this Controller,
 358  * but we have only 1 bank connected to flash on board
 359  */
 360 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 361
 362 /* max number of sectors on one chip */
 363 #define CONFIG_FLASH_SECTOR_SIZE        (0x10000*2*2)
 364 #define CONFIG_ENV_SECT_SIZE            CONFIG_FLASH_SECTOR_SIZE
 365 #define CONFIG_SYS_MAX_FLASH_SECT       128
 366
 367 /* environments */
 368 #define CONFIG_ENV_IS_IN_FLASH
 369 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_MONITOR_BASE + 0x140000)
 370 #define CONFIG_ENV_SIZE                 8192
 371 #define CONFIG_ENV_OVERWRITE
 372
 373 #endif  /* __CONFIG_H */