include/configs/am43xx_evm.h

   1 /*
   2  * am43xx_evm.h
   3  *
   4  * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_AM43XX_EVM_H
  10 #define __CONFIG_AM43XX_EVM_H
  11
  12 #define CONFIG_AM43XX
  13
  14 #define CONFIG_BOARD_LATE_INIT
  15 #define CONFIG_ARCH_CPU_INIT
  16 #define CONFIG_SYS_CACHELINE_SIZE       32
  17 #define CONFIG_MAX_RAM_BANK_SIZE        (1024 << 20)    /* 1GB */
  18 #define CONFIG_SYS_TIMERBASE            0x48040000      /* Use Timer2 */
  19
  20 #include <asm/arch/omap.h>
  21
  22 /* NS16550 Configuration */
  23 #define CONFIG_SYS_NS16550
  24 #define CONFIG_SYS_NS16550_SERIAL
  25 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  26 #define CONFIG_SYS_NS16550_CLK          48000000
  27
  28 /* I2C Configuration */
  29 #define CONFIG_CMD_EEPROM
  30 #define CONFIG_ENV_EEPROM_IS_ON_I2C
  31 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50    /* Main EEPROM */
  32 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
  33 #define CONFIG_SYS_I2C_MULTI_EEPROMS
  34
  35 /* SPL defines. */
  36 #define CONFIG_SPL_TEXT_BASE            0x40300350
  37 #define CONFIG_SPL_MAX_SIZE             (220 << 10)     /* 220KB */
  38 #define CONFIG_SPL_YMODEM_SUPPORT
  39
  40 /* Enabling L2 Cache */
  41 #define CONFIG_SYS_L2_PL310
  42 #define CONFIG_SYS_PL310_BASE   0x48242000
  43 #define CONFIG_SYS_CACHELINE_SIZE       32
  44
  45 /*
  46  * Since SPL did pll and ddr initialization for us,
  47  * we don't need to do it twice.
  48  */
  49 #if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NOR_BOOT)
  50 #define CONFIG_SKIP_LOWLEVEL_INIT
  51 #endif
  52
  53 /* Now bring in the rest of the common code. */
  54 #include <configs/ti_armv7_common.h>
  55
  56 /* Always 128 KiB env size */
  57 #define CONFIG_ENV_SIZE                 (128 << 10)
  58
  59 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  60
  61 /* Clock Defines */
  62 #define V_OSCK                          24000000  /* Clock output from T2 */
  63 #define V_SCLK                          (V_OSCK)
  64
  65 /* NS16550 Configuration */
  66 #define CONFIG_SYS_NS16550_COM1         0x44e09000      /* Base EVM has UART0 */
  67
  68 #define CONFIG_ENV_IS_NOWHERE
  69
  70 #define CONFIG_SPL_LDSCRIPT             "$(CPUDIR)/omap-common/u-boot-spl.lds"
  71
  72 /* SPL USB Support */
  73 #define CONFIG_SPL_USB_SUPPORT
  74 #define CONFIG_SPL_USB_HOST_SUPPORT
  75 #define CONFIG_SYS_USB_FAT_BOOT_PARTITION               1
  76
  77 #define CONFIG_CMD_USB
  78 #define CONFIG_USB_HOST
  79 #define CONFIG_USB_XHCI
  80 #define CONFIG_USB_XHCI_OMAP
  81 #define CONFIG_USB_STORAGE
  82 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
  83
  84 #define CONFIG_OMAP_USB_PHY
  85 #define CONFIG_AM437X_USB2PHY2_HOST
  86
  87 /* SPI */
  88 #undef CONFIG_OMAP3_SPI
  89 #define CONFIG_TI_QSPI
  90 #define CONFIG_SPI_FLASH
  91 #define CONFIG_SPI_FLASH_MACRONIX
  92 #define CONFIG_CMD_SF
  93 #define CONFIG_CMD_SPI
  94 #define CONFIG_TI_SPI_MMAP
  95 #define CONFIG_QSPI_SEL_GPIO                   48
  96 #define CONFIG_SF_DEFAULT_SPEED                48000000
  97 #define CONFIG_DEFAULT_SPI_MODE                SPI_MODE_3
  98
  99 /* SPI SPL */
 100 #define CONFIG_SPL_SPI_SUPPORT
 101 #define CONFIG_SPL_SPI_LOAD
 102 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 103 #define CONFIG_SPL_SPI_BUS             0
 104 #define CONFIG_SPL_SPI_CS              0
 105 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x20000
 106
 107 /* Enhance our eMMC support / experience. */
 108 #define CONFIG_CMD_GPT
 109 #define CONFIG_EFI_PARTITION
 110 #define CONFIG_PARTITION_UUIDS
 111 #define CONFIG_CMD_PART
 112
 113 #ifndef CONFIG_SPL_BUILD
 114 #define CONFIG_EXTRA_ENV_SETTINGS \
 115         DEFAULT_LINUX_BOOT_ENV \
 116         "fdtfile=undefined\0" \
 117         "bootpart=0:2\0" \
 118         "bootdir=/boot\0" \
 119         "bootfile=zImage\0" \
 120         "console=ttyO0,115200n8\0" \
 121         "partitions=" \
 122                 "uuid_disk=${uuid_gpt_disk};" \
 123                 "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
 124         "optargs=\0" \
 125         "mmcdev=0\0" \
 126         "mmcroot=/dev/mmcblk0p2 rw\0" \
 127         "mmcrootfstype=ext4 rootwait\0" \
 128         "usbroot=/dev/sda2 rw\0" \
 129         "usbrootfstype=ext4 rootwait\0" \
 130         "usbdev=0\0" \
 131         "ramroot=/dev/ram0 rw\0" \
 132         "ramrootfstype=ext2\0" \
 133         "mmcargs=setenv bootargs console=${console} " \
 134                 "${optargs} " \
 135                 "root=${mmcroot} " \
 136                 "rootfstype=${mmcrootfstype}\0" \
 137         "usbargs=setenv bootargs console=${console} " \
 138                 "${optargs} " \
 139                 "root=${usbroot} " \
 140                 "rootfstype=${usbrootfstype}\0" \
 141         "bootenv=uEnv.txt\0" \
 142         "loadbootenv=load ${devtype} ${devnum} ${loadaddr} ${bootenv}\0" \
 143         "importbootenv=echo Importing environment from mmc ...; " \
 144                 "env import -t $loadaddr $filesize\0" \
 145         "ramargs=setenv bootargs console=${console} " \
 146                 "${optargs} " \
 147                 "root=${ramroot} " \
 148                 "rootfstype=${ramrootfstype}\0" \
 149         "loadramdisk=load ${devtype} ${devnum} ${rdaddr} ramdisk.gz\0" \
 150         "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
 151         "loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
 152         "mmcboot=mmc dev ${mmcdev}; " \
 153                 "setenv devnum ${mmcdev}; " \
 154                 "if mmc rescan; then " \
 155                         "echo SD/MMC found on device ${devnum};" \
 156                         "if run loadbootenv; then " \
 157                                 "echo Loaded environment from ${bootenv};" \
 158                                 "run importbootenv;" \
 159                         "fi;" \
 160                         "if test -n $uenvcmd; then " \
 161                                 "echo Running uenvcmd ...;" \
 162                                 "run uenvcmd;" \
 163                         "fi;" \
 164                         "if run loadimage; then " \
 165                                 "run loadfdt; " \
 166                                 "echo Booting from mmc${mmcdev} ...; " \
 167                                 "run mmcargs; " \
 168                                 "bootz ${loadaddr} - ${fdtaddr}; " \
 169                         "fi;" \
 170                 "fi;\0" \
 171         "usbboot=" \
 172                 "setenv devnum ${usbdev}; " \
 173                 "setenv devtype usb; " \
 174                 "usb start ${usbdev}; " \
 175                 "if usb dev ${usbdev}; then " \
 176                         "if run loadbootenv; then " \
 177                                 "echo Loaded environment from ${bootenv};" \
 178                                 "run importbootenv;" \
 179                         "fi;" \
 180                         "if test -n $uenvcmd; then " \
 181                                 "echo Running uenvcmd ...;" \
 182                                 "run uenvcmd;" \
 183                         "fi;" \
 184                         "if run loadimage; then " \
 185                                 "run loadfdt; " \
 186                                 "echo Booting from usb ${usbdev}...; " \
 187                                 "run usbargs;" \
 188                                 "bootz ${loadaddr} - ${fdtaddr}; " \
 189                         "fi;" \
 190                 "fi\0" \
 191         "findfdt="\
 192                 "if test $board_name = AM43EPOS; then " \
 193                         "setenv fdtfile am43x-epos-evm.dtb; fi; " \
 194                 "if test $board_name = AM43__GP; then " \
 195                         "setenv fdtfile am437x-gp-evm.dtb; fi; " \
 196                 "if test $fdtfile = undefined; then " \
 197                         "echo WARNING: Could not determine device tree; fi; \0"
 198
 199 #define CONFIG_BOOTCOMMAND \
 200         "run findfdt; " \
 201         "run mmcboot;" \
 202         "run usbboot;"
 203
 204 #endif
 205
 206 /* CPSW Ethernet */
 207 #define CONFIG_CMD_NET
 208 #define CONFIG_CMD_DHCP
 209 #define CONFIG_CMD_PING
 210 #define CONFIG_CMD_MII
 211 #define CONFIG_DRIVER_TI_CPSW
 212 #define CONFIG_MII
 213 #define CONFIG_BOOTP_DEFAULT
 214 #define CONFIG_BOOTP_DNS
 215 #define CONFIG_BOOTP_DNS2
 216 #define CONFIG_BOOTP_SEND_HOSTNAME
 217 #define CONFIG_BOOTP_GATEWAY
 218 #define CONFIG_BOOTP_SUBNETMASK
 219 #define CONFIG_NET_RETRY_COUNT          10
 220 #define CONFIG_NET_MULTI
 221 #define CONFIG_PHY_GIGE
 222 #define CONFIG_PHYLIB
 223
 224 #define CONFIG_SPL_ENV_SUPPORT
 225 #define CONFIG_SPL_NET_VCI_STRING       "AM43xx U-Boot SPL"
 226
 227 #define CONFIG_SPL_ETH_SUPPORT
 228 #define CONFIG_SPL_NET_SUPPORT
 229 #define CONFIG_SYS_RX_ETH_BUFFER        64
 230
 231 #endif  /* __CONFIG_AM43XX_EVM_H */