include/configs/apf27.h

   1 /*
   2  *
   3  * Configuration settings for the Armadeus Project motherboard APF27
   4  *
   5  * Copyright (C) 2008-2013 Eric Jarrige <eric.jarrige@armadeus.org>
   6  *
   7  * SPDX-License-Identifier:    GPL-2.0+
   8  */
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #define CONFIG_VERSION_VARIABLE
  14 #define CONFIG_ENV_VERSION      10
  15 #define CONFIG_IDENT_STRING     " apf27 patch 3.10"
  16 #define CONFIG_BOARD_NAME apf27
  17
  18 /*
  19  * SoC configurations
  20  */
  21 #define CONFIG_ARM926EJS                /* this is an ARM926EJS CPU */
  22 #define CONFIG_MX27                     /* in a Freescale i.MX27 Chip */
  23 #define CONFIG_MACH_TYPE        1698    /* APF27 */
  24 #define CONFIG_SYS_GENERIC_BOARD
  25
  26 /*
  27  * Enable the call to miscellaneous platform dependent initialization.
  28  */
  29 #define CONFIG_SYS_NO_FLASH     /* to be define before <config_cmd_default.h> */
  30
  31 /*
  32  * Board display option
  33  */
  34 #define CONFIG_DISPLAY_BOARDINFO
  35 #define CONFIG_DISPLAY_CPUINFO
  36
  37 /*
  38  * SPL
  39  */
  40 #define CONFIG_SPL_TARGET       "u-boot-with-spl.bin"
  41 #define CONFIG_SPL_LDSCRIPT     "arch/$(ARCH)/cpu/u-boot-spl.lds"
  42 #define CONFIG_SPL_MAX_SIZE     2048
  43 #define CONFIG_SPL_TEXT_BASE    0xA0000000
  44
  45 /* NAND boot config */
  46 #define CONFIG_SPL_NAND_SUPPORT
  47 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
  48 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x800
  49 #define CONFIG_SYS_NAND_U_BOOT_DST      CONFIG_SYS_TEXT_BASE
  50 #define CONFIG_SYS_NAND_U_BOOT_SIZE     CONFIG_SYS_MONITOR_LEN - 0x800
  51
  52 /*
  53  * BOOTP options
  54  */
  55 #define CONFIG_BOOTP_SUBNETMASK
  56 #define CONFIG_BOOTP_GATEWAY
  57 #define CONFIG_BOOTP_HOSTNAME
  58 #define CONFIG_BOOTP_BOOTPATH
  59 #define CONFIG_BOOTP_BOOTFILESIZE
  60 #define CONFIG_BOOTP_DNS
  61 #define CONFIG_BOOTP_DNS2
  62
  63 #define CONFIG_HOSTNAME CONFIG_BOARD_NAME
  64 #define CONFIG_ROOTPATH "/tftpboot/" __stringify(CONFIG_BOARD_NAME) "-root"
  65
  66 /*
  67  * U-Boot Commands
  68  */
  69 #include <config_cmd_default.h>
  70
  71 #define CONFIG_CMD_ASKENV       /* ask for env variable         */
  72 #define CONFIG_CMD_BSP          /* Board Specific functions     */
  73 #define CONFIG_CMD_CACHE        /* icache, dcache               */
  74 #define CONFIG_CMD_DATE
  75 #define CONFIG_CMD_DHCP         /* DHCP Support                 */
  76 #define CONFIG_CMD_DNS
  77 #define CONFIG_CMD_EEPROM
  78 #define CONFIG_CMD_EXT2
  79 #define CONFIG_CMD_FAT          /* FAT support                  */
  80 #define CONFIG_CMD_IMX_FUSE     /* imx iim fuse                 */
  81 #define CONFIG_CMD_I2C
  82 #define CONFIG_CMD_MII          /* MII support                  */
  83 #define CONFIG_CMD_MMC
  84 #define CONFIG_CMD_MTDPARTS     /* MTD partition support        */
  85 #define CONFIG_CMD_NAND         /* NAND support                 */
  86 #define CONFIG_CMD_NAND_LOCK_UNLOCK
  87 #define CONFIG_CMD_NAND_TRIMFFS
  88 #define CONFIG_CMD_NFS          /* NFS support                  */
  89 #define CONFIG_CMD_PING         /* ping support                 */
  90 #define CONFIG_CMD_SETEXPR      /* setexpr support              */
  91 #define CONFIG_CMD_UBI
  92 #define CONFIG_CMD_UBIFS
  93
  94 /*
  95  * Memory configurations
  96  */
  97 #define CONFIG_NR_DRAM_POPULATED 1
  98 #define CONFIG_NR_DRAM_BANKS    2
  99
 100 #define ACFG_SDRAM_MBYTE_SYZE 64
 101
 102 #define PHYS_SDRAM_1                    0xA0000000
 103 #define PHYS_SDRAM_2                    0xB0000000
 104 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 105 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (512<<10))
 106 #define CONFIG_SYS_MEMTEST_START        0xA0000000      /* memtest test area  */
 107 #define CONFIG_SYS_MEMTEST_END          0xA0300000      /* 3 MiB RAM test */
 108
 109 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE  \
 110                 + PHYS_SDRAM_1_SIZE - 0x0100000)
 111
 112 #define CONFIG_SYS_TEXT_BASE            0xA0000800
 113
 114 /*
 115  * FLASH organization
 116  */
 117 #define ACFG_MONITOR_OFFSET             0x00000000
 118 #define CONFIG_SYS_MONITOR_LEN          0x00100000      /* 1MiB */
 119 #define CONFIG_ENV_IS_IN_NAND
 120 #define CONFIG_ENV_OVERWRITE
 121 #define CONFIG_ENV_OFFSET               0x00100000      /* NAND offset */
 122 #define CONFIG_ENV_SIZE                 0x00020000      /* 128kB  */
 123 #define CONFIG_ENV_RANGE                0X00080000      /* 512kB */
 124 #define CONFIG_ENV_OFFSET_REDUND        \
 125                 (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)  /* +512kB */
 126 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE /* 512kB */
 127 #define CONFIG_FIRMWARE_OFFSET          0x00200000
 128 #define CONFIG_FIRMWARE_SIZE            0x00080000      /* 512kB  */
 129 #define CONFIG_KERNEL_OFFSET            0x00300000
 130 #define CONFIG_ROOTFS_OFFSET            0x00800000
 131
 132 #define CONFIG_MTDMAP                   "mxc_nand.0"
 133 #define MTDIDS_DEFAULT                  "nand0=" CONFIG_MTDMAP
 134 #define MTDPARTS_DEFAULT        "mtdparts=" CONFIG_MTDMAP \
 135                                 ":1M(u-boot)ro," \
 136                                 "512K(env)," \
 137                                 "512K(env2)," \
 138                                 "512K(firmware)," \
 139                                 "512K(dtb)," \
 140                                 "5M(kernel)," \
 141                                 "-(rootfs)"
 142
 143 /*
 144  * U-Boot general configurations
 145  */
 146 #define CONFIG_SYS_LONGHELP
 147 #define CONFIG_SYS_PROMPT               "BIOS> "        /* prompt string */
 148 #define CONFIG_SYS_CBSIZE               2048            /* console I/O buffer */
 149 #define CONFIG_SYS_PBSIZE               \
 150                                 (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 151                                                 /* Print buffer size */
 152 #define CONFIG_SYS_MAXARGS              16              /* max command args */
 153 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 154                                                 /* Boot argument buffer size */
 155 #define CONFIG_AUTO_COMPLETE
 156 #define CONFIG_CMDLINE_EDITING
 157 #define CONFIG_SYS_HUSH_PARSER                  /* enable the "hush" shell */
 158 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "    /* secondary prompt string */
 159 #define CONFIG_ENV_VARS_UBOOT_CONFIG
 160 #define CONFIG_PREBOOT                  "run check_flash check_env;"
 161
 162
 163 /*
 164  * Boot Linux
 165  */
 166 #define CONFIG_CMDLINE_TAG              /* send commandline to Kernel   */
 167 #define CONFIG_SETUP_MEMORY_TAGS        /* send memory definition to kernel */
 168 #define CONFIG_INITRD_TAG               /* send initrd params   */
 169
 170 #define CONFIG_OF_LIBFDT
 171
 172 #define CONFIG_BOOTDELAY        5
 173 #define CONFIG_ZERO_BOOTDELAY_CHECK
 174 #define CONFIG_BOOTFILE         __stringify(CONFIG_BOARD_NAME) "-linux.bin"
 175 #define CONFIG_BOOTARGS         "console=" __stringify(ACFG_CONSOLE_DEV) "," \
 176                         __stringify(CONFIG_BAUDRATE) " " MTDPARTS_DEFAULT \
 177                         " ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs "
 178
 179 #define ACFG_CONSOLE_DEV        ttySMX0
 180 #define CONFIG_BOOTCOMMAND      "run ubifsboot"
 181 #define CONFIG_SYS_AUTOLOAD     "no"
 182 /*
 183  * Default load address for user programs and kernel
 184  */
 185 #define CONFIG_LOADADDR                 0xA0000000
 186 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 187
 188 /*
 189  * Extra Environments
 190  */
 191 #define CONFIG_EXTRA_ENV_SETTINGS \
 192         "env_version="          __stringify(CONFIG_ENV_VERSION)         "\0" \
 193         "consoledev="           __stringify(ACFG_CONSOLE_DEV)           "\0" \
 194         "mtdparts="             MTDPARTS_DEFAULT                        "\0" \
 195         "partition=nand0,6\0"                                           \
 196         "u-boot_addr="          __stringify(ACFG_MONITOR_OFFSET)        "\0" \
 197         "env_addr="             __stringify(CONFIG_ENV_OFFSET)          "\0" \
 198         "firmware_addr="        __stringify(CONFIG_FIRMWARE_OFFSET)     "\0" \
 199         "firmware_size="        __stringify(CONFIG_FIRMWARE_SIZE)       "\0" \
 200         "kernel_addr="          __stringify(CONFIG_KERNEL_OFFSET)       "\0" \
 201         "rootfs_addr="          __stringify(CONFIG_ROOTFS_OFFSET)       "\0" \
 202         "board_name="           __stringify(CONFIG_BOARD_NAME)          "\0" \
 203         "kernel_addr_r=A0000000\0" \
 204         "check_env=if test -n ${flash_env_version}; "                   \
 205                 "then env default env_version; "                        \
 206                 "else env set flash_env_version ${env_version}; env save; "\
 207                 "fi; "                                                  \
 208                 "if itest ${flash_env_version} < ${env_version}; then " \
 209                         "echo \"*** Warning - Environment version"      \
 210                         " change suggests: run flash_reset_env; reset\"; "\
 211                         "env default flash_reset_env; "\
 212                 "fi; \0"                                                \
 213         "check_flash=nand lock; nand unlock ${env_addr}; \0"    \
 214         "flash_reset_env=env default -f -a; saveenv; run update_env;"   \
 215                 "echo Flash environment variables erased!\0"            \
 216         "download_uboot=tftpboot ${loadaddr} ${board_name}"             \
 217                 "-u-boot-with-spl.bin\0"                                \
 218         "flash_uboot=nand unlock ${u-boot_addr} ;"                      \
 219                 "nand erase.part u-boot;"               \
 220                 "if nand write.trimffs ${fileaddr} ${u-boot_addr} ${filesize};"\
 221                         "then nand lock; nand unlock ${env_addr};"      \
 222                                 "echo Flashing of uboot succeed;"       \
 223                         "else echo Flashing of uboot failed;"           \
 224                 "fi; \0"                                                \
 225         "update_uboot=run download_uboot flash_uboot\0"                 \
 226         "download_env=tftpboot ${loadaddr} ${board_name}"               \
 227                 "-u-boot-env.txt\0"                             \
 228         "flash_env=env import -t ${loadaddr}; env save; \0"             \
 229         "update_env=run download_env flash_env\0"                       \
 230         "update_all=run update_env update_uboot\0"                      \
 231         "unlock_regs=mw 10000008 0; mw 10020008 0\0"                    \
 232
 233 /*
 234  * Serial Driver
 235  */
 236 #define CONFIG_MXC_UART
 237 #define CONFIG_CONS_INDEX               1
 238 #define CONFIG_BAUDRATE                 115200
 239 #define CONFIG_MXC_UART_BASE            UART1_BASE
 240
 241 /*
 242  * GPIO
 243  */
 244 #define CONFIG_MXC_GPIO
 245
 246 /*
 247  * NOR
 248  */
 249
 250 /*
 251  * NAND
 252  */
 253 #define CONFIG_NAND_MXC
 254
 255 #define CONFIG_MXC_NAND_REGS_BASE       0xD8000000
 256 #define CONFIG_SYS_NAND_BASE            CONFIG_MXC_NAND_REGS_BASE
 257 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 258
 259 #define CONFIG_MXC_NAND_HWECC
 260 #define CONFIG_SYS_NAND_LARGEPAGE
 261 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 262 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 263 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 264 #define CONFIG_SYS_NAND_PAGE_COUNT      CONFIG_SYS_NAND_BLOCK_SIZE / \
 265                                                 CONFIG_SYS_NAND_PAGE_SIZE
 266 #define CONFIG_SYS_NAND_SIZE            (256 * 1024 * 1024)
 267 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   11
 268 #define NAND_MAX_CHIPS                  1
 269
 270 #define CONFIG_FLASH_SHOW_PROGRESS      45
 271 #define CONFIG_SYS_NAND_QUIET           1
 272
 273 /*
 274  * Partitions & Filsystems
 275  */
 276 #define CONFIG_MTD_DEVICE
 277 #define CONFIG_MTD_PARTITIONS
 278 #define CONFIG_DOS_PARTITION
 279 #define CONFIG_SUPPORT_VFAT
 280
 281 /*
 282  * UBIFS
 283  */
 284 #define CONFIG_RBTREE
 285 #define CONFIG_LZO
 286
 287 /*
 288  * Ethernet (on SOC imx FEC)
 289  */
 290 #define CONFIG_FEC_MXC
 291 #define CONFIG_FEC_MXC_PHYADDR          0x1f
 292 #define CONFIG_MII                              /* MII PHY management   */
 293
 294 /*
 295  * FPGA
 296  */
 297 #ifndef CONFIG_SPL_BUILD
 298 #define CONFIG_FPGA
 299 #endif
 300 #define CONFIG_FPGA_COUNT               1
 301 #define CONFIG_FPGA_XILINX
 302 #define CONFIG_FPGA_SPARTAN3
 303 #define CONFIG_SYS_FPGA_WAIT            250 /* 250 ms */
 304 #define CONFIG_SYS_FPGA_PROG_FEEDBACK
 305 #define CONFIG_SYS_FPGA_CHECK_CTRLC
 306 #define CONFIG_SYS_FPGA_CHECK_ERROR
 307
 308 /*
 309  * Fuses - IIM
 310  */
 311 #ifdef CONFIG_CMD_IMX_FUSE
 312 #define IIM_MAC_BANK            0
 313 #define IIM_MAC_ROW             5
 314 #define IIM0_SCC_KEY            11
 315 #define IIM1_SUID               1
 316 #endif
 317
 318 /*
 319  * I2C
 320  */
 321
 322 #ifdef CONFIG_CMD_I2C
 323 #define CONFIG_SYS_I2C
 324 #define CONFIG_SYS_I2C_MXC
 325 #define CONFIG_SYS_MXC_I2C1_SPEED       100000  /* 100 kHz */
 326 #define CONFIG_SYS_MXC_I2C1_SLAVE       0x7F
 327 #define CONFIG_SYS_MXC_I2C2_SPEED       100000  /* 100 kHz */
 328 #define CONFIG_SYS_MXC_I2C2_SLAVE       0x7F
 329 #define CONFIG_SYS_I2C_NOPROBES         { }
 330
 331 #ifdef CONFIG_CMD_EEPROM
 332 # define CONFIG_SYS_I2C_EEPROM_ADDR     0x50    /* EEPROM 24LC02 */
 333 # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1       /* bytes of address */
 334 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 335 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10      /* msec */
 336 #endif /* CONFIG_CMD_EEPROM */
 337 #endif /* CONFIG_CMD_I2C */
 338
 339 /*
 340  * SD/MMC
 341  */
 342 #ifdef CONFIG_CMD_MMC
 343 #define CONFIG_MMC
 344 #define CONFIG_GENERIC_MMC
 345 #define CONFIG_MXC_MMC
 346 #define CONFIG_MXC_MCI_REGS_BASE        0x10014000
 347 #endif
 348
 349 /*
 350  * RTC
 351  */
 352 #ifdef CONFIG_CMD_DATE
 353 #define CONFIG_RTC_DS1374
 354 #define CONFIG_SYS_RTC_BUS_NUM          0
 355 #endif /* CONFIG_CMD_DATE */
 356
 357 /*
 358  * PLL
 359  *
 360  *  31 | x  |x| x x x x |x x x x x x x x x x |x x|x x x x|x x x x x x x x x x| 0
 361  *     |CPLM|X|----PD---|--------MFD---------|XXX|--MFI--|-----MFN-----------|
 362  */
 363 #define CONFIG_MX27_CLK32               32768   /* 32768 or 32000 Hz crystal */
 364
 365 #if (ACFG_SDRAM_MBYTE_SYZE == 64) /* micron MT46H16M32LF -6 */
 366 /* micron 64MB */
 367 #define PHYS_SDRAM_1_SIZE                       0x04000000 /* 64 MB */
 368 #define PHYS_SDRAM_2_SIZE                       0x04000000 /* 64 MB */
 369 #endif
 370
 371 #if (ACFG_SDRAM_MBYTE_SYZE == 128)
 372 /* micron 128MB */
 373 #define PHYS_SDRAM_1_SIZE                       0x08000000 /* 128 MB */
 374 #define PHYS_SDRAM_2_SIZE                       0x08000000 /* 128 MB */
 375 #endif
 376
 377 #if (ACFG_SDRAM_MBYTE_SYZE == 256)
 378 /* micron 256MB */
 379 #define PHYS_SDRAM_1_SIZE                       0x10000000 /* 256 MB */
 380 #define PHYS_SDRAM_2_SIZE                       0x10000000 /* 256 MB */
 381 #endif
 382
 383 #endif /* __CONFIG_H */