]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - include/configs/apollon.h
Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx
[karo-tx-uboot.git] / include / configs / apollon.h
1 /*
2  * (C) Copyright 2005-2008
3  * Samsung Electronics,
4  * Kyungmin Park <kyungmin.park@samsung.com>
5  *
6  * Configuration settings for the 2420 Samsung Apollon board.
7  *
8  * See file CREDITS for list of people who contributed to this
9  * project.
10  *
11  * This program is free software; you can redistribute it and/or
12  * modify it under the terms of the GNU General Public License as
13  * published by the Free Software Foundation; either version 2 of
14  * the License, or (at your option) any later version.
15  *
16  * This program is distributed in the hope that it will be useful,
17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
19  * GNU General Public License for more details.
20  *
21  * You should have received a copy of the GNU General Public License
22  * along with this program; if not, write to the Free Software
23  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
24  * MA 02111-1307 USA
25  */
26
27 #ifndef __CONFIG_H
28 #define __CONFIG_H
29
30 /*
31  * High Level Configuration Options
32  */
33 #define CONFIG_ARM1136          1 /* This is an arm1136 CPU core */
34 #define CONFIG_OMAP             1 /* in a TI OMAP core */
35 #define CONFIG_OMAP2420         1 /* which is in a 2420 */
36 #define CONFIG_OMAP2420_APOLLON 1
37 #define CONFIG_APOLLON          1
38 #define CONFIG_APOLLON_PLUS     1 /* If you have apollon plus 1.x */
39
40 /* Clock config to target*/
41 #define PRCM_CONFIG_I           1
42 /* #define PRCM_CONFIG_II       1 */
43
44 /* Boot method */
45 /* uncomment if you use NOR boot */
46 /* #define CONFIG_SYS_NOR_BOOT          1 */
47
48 /* uncomment if you use NOR on CS3 */
49 /* #define CONFIG_SYS_USE_NOR           1 */
50
51 #ifdef CONFIG_SYS_NOR_BOOT
52 #undef CONFIG_SYS_USE_NOR
53 #define CONFIG_SYS_USE_NOR              1
54 #endif
55
56 /* uncommnet if you want to use UBI */
57 #define CONFIG_SYS_USE_UBI
58
59 #include <asm/arch/omap2420.h>  /* get chip and board defs */
60
61 #define V_SCLK  12000000
62
63 /* input clock of PLL */
64 /* the OMAP2420 H4 has 12MHz, 13MHz, or 19.2Mhz crystal input */
65 #define CONFIG_SYS_CLK_FREQ     V_SCLK
66
67 #undef  CONFIG_USE_IRQ  /* no support for IRQs */
68 #define CONFIG_MISC_INIT_R
69
70 #define CONFIG_CMDLINE_TAG      1       /* enable passing of ATAGs */
71 #define CONFIG_SETUP_MEMORY_TAGS        1
72 #define CONFIG_INITRD_TAG       1
73 #define CONFIG_REVISION_TAG     1
74
75 /*
76  * Size of malloc() pool
77  */
78 #define CONFIG_ENV_SIZE SZ_128K /* Total Size of Environment Sector */
79 #define CONFIG_ENV_SIZE_FLEX SZ_256K
80 #define CONFIG_SYS_MALLOC_LEN   (CONFIG_ENV_SIZE + SZ_1M)
81
82 /*
83  * Hardware drivers
84  */
85
86 /*
87  * SMC91c96 Etherent
88  */
89 #define CONFIG_LAN91C96
90 #define CONFIG_LAN91C96_BASE    (APOLLON_CS1_BASE+0x300)
91 #define CONFIG_LAN91C96_EXT_PHY
92
93 /*
94  * NS16550 Configuration
95  */
96 #define V_NS16550_CLK   (48000000)      /* 48MHz (APLL96/2) */
97
98 #define CONFIG_SYS_NS16550
99 #define CONFIG_SYS_NS16550_SERIAL
100 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
101 #define CONFIG_SYS_NS16550_CLK  V_NS16550_CLK   /* 3MHz (1.5MHz*2) */
102 #define CONFIG_SYS_NS16550_COM1 OMAP2420_UART1
103
104 /*
105  * select serial console configuration
106  */
107 #define CONFIG_SERIAL1  1       /* UART1 on H4 */
108
109 /* allow to overwrite serial and ethaddr */
110 #define CONFIG_ENV_OVERWRITE
111 #define CONFIG_CONS_INDEX       1
112 #define CONFIG_BAUDRATE         115200
113 #define CONFIG_SYS_BAUDRATE_TABLE       {9600, 19200, 38400, 57600, 115200}
114
115 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
116 #include        <config_cmd_default.h>
117
118 #define CONFIG_CMD_DHCP
119 #define CONFIG_CMD_DIAG
120 #define CONFIG_CMD_ONENAND
121
122 #ifdef CONFIG_SYS_USE_UBI
123 #define CONFIG_CMD_JFFS2
124 #define CONFIG_CMD_UBI
125 #define CONFIG_RBTREE
126 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
127 #define CONFIG_MTD_PARTITIONS
128 #endif
129
130 #undef  CONFIG_CMD_SOURCE
131
132 #ifndef CONFIG_SYS_USE_NOR
133 # undef CONFIG_CMD_FLASH
134 # undef CONFIG_CMD_IMLS
135 #endif
136
137 #define CONFIG_BOOTP_MASK       CONFIG_BOOTP_DEFAULT
138
139 #define CONFIG_BOOTDELAY        1
140
141 #define CONFIG_NETMASK  255.255.255.0
142 #define CONFIG_IPADDR   192.168.116.25
143 #define CONFIG_SERVERIP 192.168.116.1
144 #define CONFIG_BOOTFILE "uImage"
145 #define CONFIG_ETHADDR  00:0E:99:00:24:20
146
147 #ifdef CONFIG_APOLLON_PLUS
148 #define CONFIG_SYS_MEM  "mem=64M"
149 #else
150 #define CONFIG_SYS_MEM  "mem=128"
151 #endif
152
153 #ifdef CONFIG_SYS_USE_UBI
154 #define CONFIG_SYS_UBI "ubi.mtd=4"
155 #else
156 #define CONFIG_SYS_UBI ""
157 #endif
158
159 #define CONFIG_BOOTARGS "root=/dev/nfs rw " CONFIG_SYS_MEM \
160         " console=ttyS0,115200n8" \
161         " ip=192.168.116.25:192.168.116.1:192.168.116.1:255.255.255.0:" \
162         "apollon:eth0:off nfsroot=/tftpboot/nfsroot profile=2 " \
163         CONFIG_SYS_UBI
164
165 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
166         "Image=tftp 0x80008000 Image; go 0x80008000\0"                  \
167         "zImage=tftp 0x80180000 zImage; go 0x80180000\0"                \
168         "uImage=tftp 0x80180000 uImage; bootm 0x80180000\0"             \
169         "uboot=tftp 0x80008000 u-boot.bin; go 0x80008000\0"             \
170         "xloader=tftp 0x80180000 x-load.bin; "                          \
171         " cp.w 0x80180000 0x00000400 0x1000; go 0x00000400\0"           \
172         "syncmode50=mw.w 0x1e442 0xc0c4; mw 0x6800a060 0xe30d1201\0"    \
173         "syncmode=mw.w 0x1e442 0xe0f4; mw 0x6800a060 0xe30d1201\0"      \
174         "norboot=cp32 0x18040000 0x80008000 0x200000; go 0x80008000\0"  \
175         "oneboot=onenand read 0x80008000 0x40000 0x200000; go 0x80008000\0" \
176         "onesyncboot=run syncmode oneboot\0"                            \
177         "updateb=tftp 0x80180000 u-boot-onenand.bin; "                  \
178         " onenand erase 0x0 0x20000; onenand write 0x80180000 0x0 0x20000\0" \
179         "ubi=setenv bootargs ${bootargs} ubi.mtd=4 ${mtdparts}; run uImage\0" \
180         "bootcmd=run uboot\0"
181
182 /*
183  * Miscellaneous configurable options
184  */
185 #define CONFIG_SYS_LONGHELP     /* undef to save memory */
186 #define CONFIG_SYS_PROMPT       "Apollon # "
187 #define CONFIG_SYS_CBSIZE       256     /* Console I/O Buffer Size */
188 /* Print Buffer Size */
189 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
190 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
191 /* Boot Argument Buffer Size */
192 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
193 /* memtest works on */
194 #define CONFIG_SYS_MEMTEST_START        (OMAP2420_SDRC_CS0)
195 #define CONFIG_SYS_MEMTEST_END          (OMAP2420_SDRC_CS0+SZ_31M)
196
197 /* default load address */
198 #define CONFIG_SYS_LOAD_ADDR    (OMAP2420_SDRC_CS0)
199
200 /* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2)
201  * or by 32KHz clk, or from external sig. This rate is divided by a local
202  * divisor.
203  */
204 #define CONFIG_SYS_TIMERBASE    OMAP2420_GPT2
205 #define CONFIG_SYS_PTV          7       /* 2^(PTV+1) */
206 #define CONFIG_SYS_HZ           ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV))
207
208 /*-----------------------------------------------------------------------
209  * Stack sizes
210  *
211  * The stack sizes are set up in start.S using the settings below
212  */
213 #define CONFIG_STACKSIZE SZ_128K        /* regular stack */
214
215 /*-----------------------------------------------------------------------
216  * Physical Memory Map
217  */
218 #define CONFIG_NR_DRAM_BANKS    1       /* CS1 may or may not be populated */
219 #define PHYS_SDRAM_1            OMAP2420_SDRC_CS0
220 #define PHYS_SDRAM_1_SIZE       SZ_128M
221 #define PHYS_SDRAM_2            OMAP2420_SDRC_CS1
222
223 /*-----------------------------------------------------------------------
224  * FLASH and environment organization
225  */
226 #ifdef  CONFIG_SYS_USE_NOR
227 /* OneNAND boot, NOR has CS3, But NOR has CS0 when NOR boot */
228 # define        CONFIG_SYS_FLASH_BASE           0x18000000
229 # define        CONFIG_SYS_MAX_FLASH_BANKS      1
230 # define        CONFIG_SYS_MAX_FLASH_SECT       1024
231 /*-----------------------------------------------------------------------
232  * CFI FLASH driver setup
233  */
234 /* Flash memory is CFI compliant */
235 # define        CONFIG_SYS_FLASH_CFI    1
236 # define        CONFIG_FLASH_CFI_DRIVER 1       /* Use drivers/cfi_flash.c */
237 /* Use buffered writes (~10x faster) */
238 /* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 */
239 /* Use h/w sector protection*/
240 # define        CONFIG_SYS_FLASH_PROTECTION     1
241
242 #else   /* !CONFIG_SYS_USE_NOR */
243 # define        CONFIG_SYS_NO_FLASH     1
244 #endif  /* CONFIG_SYS_USE_NOR */
245
246 /* OneNAND boot, OneNAND has CS0, NOR boot ONeNAND has CS2 */
247 #define CONFIG_SYS_ONENAND_BASE 0x00000000
248 #define CONFIG_SYS_MONITOR_LEN          SZ_256K /* U-Boot image size */
249 #define CONFIG_ENV_IS_IN_ONENAND        1
250 #define CONFIG_ENV_ADDR         0x00020000
251 #define CONFIG_ENV_ADDR_FLEX    0x00040000
252
253 #ifdef CONFIG_SYS_USE_UBI
254 #define CONFIG_CMD_MTDPARTS
255 #define MTDIDS_DEFAULT          "onenand0=onenand"
256 #define MTDPARTS_DEFAULT        "mtdparts=onenand:128k(bootloader),"    \
257                                         "128k(params),"                 \
258                                         "2m(kernel),"                   \
259                                         "16m(rootfs),"                  \
260                                         "32m(fs),"                      \
261                                         "-(ubifs)"
262 #endif
263
264 #define PHYS_SRAM                       0x4020F800
265 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
266 #define CONFIG_SYS_INIT_SP_ADDR         PHYS_SRAM
267
268 #endif /* __CONFIG_H */