include/configs/at91sam9x5ek.h

   1 /*
   2  * Copyright (C) 2012 Atmel Corporation
   3  *
   4  * Configuation settings for the AT91SAM9X5EK board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H__
  10 #define __CONFIG_H__
  11
  12 #include <asm/hardware.h>
  13
  14 #define CONFIG_SYS_TEXT_BASE            0x26f00000
  15
  16 /* ARM asynchronous clock */
  17 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
  18 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000        /* 12 MHz crystal */
  19
  20 #define CONFIG_AT91SAM9X5EK
  21
  22 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  23 #define CONFIG_SETUP_MEMORY_TAGS
  24 #define CONFIG_INITRD_TAG
  25 #define CONFIG_SKIP_LOWLEVEL_INIT
  26 #define CONFIG_BOARD_EARLY_INIT_F
  27 #define CONFIG_DISPLAY_CPUINFO
  28
  29 #define CONFIG_CMD_BOOTZ
  30 #define CONFIG_OF_LIBFDT
  31
  32 #define CONFIG_SYS_GENERIC_BOARD
  33
  34 /* general purpose I/O */
  35 #define CONFIG_ATMEL_LEGACY             /* required until (g)pio is fixed */
  36 #define CONFIG_AT91_GPIO
  37
  38 /* serial console */
  39 #define CONFIG_ATMEL_USART
  40 #define CONFIG_USART_BASE       ATMEL_BASE_DBGU
  41 #define CONFIG_USART_ID         ATMEL_ID_SYS
  42
  43 /* LCD */
  44 #define CONFIG_LCD
  45 #define LCD_BPP                 LCD_COLOR16
  46 #define LCD_OUTPUT_BPP          24
  47 #define CONFIG_LCD_LOGO
  48 #define CONFIG_LCD_INFO
  49 #define CONFIG_LCD_INFO_BELOW_LOGO
  50 #define CONFIG_SYS_WHITE_ON_BLACK
  51 #define CONFIG_ATMEL_HLCD
  52 #define CONFIG_ATMEL_LCD_RGB565
  53 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  54
  55 #define CONFIG_BOOTDELAY        3
  56
  57 /*
  58  * BOOTP options
  59  */
  60 #define CONFIG_BOOTP_BOOTFILESIZE
  61 #define CONFIG_BOOTP_BOOTPATH
  62 #define CONFIG_BOOTP_GATEWAY
  63 #define CONFIG_BOOTP_HOSTNAME
  64
  65 /* no NOR flash */
  66 #define CONFIG_SYS_NO_FLASH
  67
  68 /*
  69  * Command line configuration.
  70  */
  71 #define CONFIG_CMD_PING
  72 #define CONFIG_CMD_DHCP
  73 #define CONFIG_CMD_NAND
  74 #define CONFIG_CMD_SF
  75 #define CONFIG_CMD_MMC
  76 #define CONFIG_CMD_FAT
  77 #define CONFIG_CMD_USB
  78
  79 /*
  80  * define CONFIG_USB_EHCI to enable USB Hi-Speed (aka 2.0)
  81  * NB: in this case, USB 1.1 devices won't be recognized.
  82  */
  83
  84
  85 /* SDRAM */
  86 #define CONFIG_NR_DRAM_BANKS            1
  87 #define CONFIG_SYS_SDRAM_BASE           0x20000000
  88 #define CONFIG_SYS_SDRAM_SIZE           0x08000000      /* 128 megs */
  89
  90 #define CONFIG_SYS_INIT_SP_ADDR \
  91         (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
  92
  93 /* DataFlash */
  94 #ifdef CONFIG_CMD_SF
  95 #define CONFIG_ATMEL_SPI
  96 #define CONFIG_SPI_FLASH_ATMEL
  97 #define CONFIG_SF_DEFAULT_SPEED         30000000
  98 #endif
  99
 100 /* NAND flash */
 101 #ifdef CONFIG_CMD_NAND
 102 #define CONFIG_NAND_ATMEL
 103 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 104 #define CONFIG_SYS_NAND_BASE            0x40000000
 105 #define CONFIG_SYS_NAND_DBW_8           1
 106 /* our ALE is AD21 */
 107 #define CONFIG_SYS_NAND_MASK_ALE        (1 << 21)
 108 /* our CLE is AD22 */
 109 #define CONFIG_SYS_NAND_MASK_CLE        (1 << 22)
 110 #define CONFIG_SYS_NAND_ENABLE_PIN      AT91_PIN_PD4
 111 #define CONFIG_SYS_NAND_READY_PIN       AT91_PIN_PD5
 112
 113 /* PMECC & PMERRLOC */
 114 #define CONFIG_ATMEL_NAND_HWECC         1
 115 #define CONFIG_ATMEL_NAND_HW_PMECC      1
 116 #define CONFIG_PMECC_CAP                2
 117 #define CONFIG_PMECC_SECTOR_SIZE        512
 118
 119 #define CONFIG_CMD_NAND_TRIMFFS
 120
 121 #define CONFIG_MTD_DEVICE
 122 #define CONFIG_CMD_MTDPARTS
 123 #define CONFIG_MTD_PARTITIONS
 124 #define CONFIG_RBTREE
 125 #define CONFIG_LZO
 126 #define CONFIG_CMD_UBI
 127 #define CONFIG_CMD_UBIFS
 128 #endif
 129
 130 /* MMC */
 131 #ifdef CONFIG_CMD_MMC
 132 #define CONFIG_MMC
 133 #define CONFIG_GENERIC_MMC
 134 #define CONFIG_GENERIC_ATMEL_MCI
 135 #endif
 136
 137 /* FAT */
 138 #ifdef CONFIG_CMD_FAT
 139 #define CONFIG_DOS_PARTITION
 140 #endif
 141
 142 /* Ethernet */
 143 #define CONFIG_MACB
 144 #define CONFIG_RMII
 145 #define CONFIG_NET_RETRY_COUNT          20
 146 #define CONFIG_MACB_SEARCH_PHY
 147
 148 /* USB */
 149 #ifdef CONFIG_CMD_USB
 150 #ifdef CONFIG_USB_EHCI
 151 #define CONFIG_USB_EHCI_ATMEL
 152 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS      2
 153 #else
 154 #define CONFIG_USB_ATMEL
 155 #define CONFIG_USB_ATMEL_CLK_SEL_UPLL
 156 #define CONFIG_USB_OHCI_NEW
 157 #define CONFIG_SYS_USB_OHCI_CPU_INIT
 158 #define CONFIG_SYS_USB_OHCI_REGS_BASE           ATMEL_BASE_OHCI
 159 #define CONFIG_SYS_USB_OHCI_SLOT_NAME           "at91sam9x5"
 160 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS      3
 161 #endif
 162 #define CONFIG_USB_STORAGE
 163 #endif
 164
 165 #define CONFIG_SYS_LOAD_ADDR            0x22000000      /* load address */
 166
 167 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
 168 #define CONFIG_SYS_MEMTEST_END          0x26e00000
 169
 170 #ifdef CONFIG_SYS_USE_NANDFLASH
 171 /* bootstrap + u-boot + env + linux in nandflash */
 172 #define CONFIG_ENV_IS_IN_NAND
 173 #define CONFIG_ENV_OFFSET               0xc0000
 174 #define CONFIG_ENV_OFFSET_REDUND        0x100000
 175 #define CONFIG_ENV_SIZE         0x20000         /* 1 sector = 128 kB */
 176 #define CONFIG_BOOTCOMMAND      "nand read " \
 177                                 "0x22000000 0x200000 0x300000; " \
 178                                 "bootm 0x22000000"
 179 #elif defined(CONFIG_SYS_USE_SPIFLASH)
 180 /* bootstrap + u-boot + env + linux in spi flash */
 181 #define CONFIG_ENV_IS_IN_SPI_FLASH
 182 #define CONFIG_ENV_OFFSET       0x5000
 183 #define CONFIG_ENV_SIZE         0x3000
 184 #define CONFIG_ENV_SECT_SIZE    0x1000
 185 #define CONFIG_ENV_SPI_MAX_HZ   30000000
 186 #define CONFIG_BOOTCOMMAND      "sf probe 0; " \
 187                                 "sf read 0x22000000 0x100000 0x300000; " \
 188                                 "bootm 0x22000000"
 189 #elif defined(CONFIG_SYS_USE_DATAFLASH)
 190 /* bootstrap + u-boot + env + linux in data flash */
 191 #define CONFIG_ENV_IS_IN_SPI_FLASH
 192 #define CONFIG_ENV_OFFSET       0x4200
 193 #define CONFIG_ENV_SIZE         0x4200
 194 #define CONFIG_ENV_SECT_SIZE    0x210
 195 #define CONFIG_ENV_SPI_MAX_HZ   30000000
 196 #define CONFIG_BOOTCOMMAND      "sf probe 0; " \
 197                                 "sf read 0x22000000 0x84000 0x294000; " \
 198                                 "bootm 0x22000000"
 199 #else /* CONFIG_SYS_USE_MMC */
 200 /* bootstrap + u-boot + env + linux in mmc */
 201 #define CONFIG_ENV_IS_IN_FAT
 202 #define CONFIG_FAT_WRITE
 203 #define FAT_ENV_INTERFACE       "mmc"
 204 #define FAT_ENV_FILE            "uboot.env"
 205 #define FAT_ENV_DEVICE_AND_PART "0"
 206 #define CONFIG_ENV_SIZE         0x4000
 207 #endif
 208
 209 #ifdef CONFIG_SYS_USE_MMC
 210 #define CONFIG_BOOTARGS         "mem=128M console=ttyS0,115200 " \
 211                                 "mtdparts=atmel_nand:" \
 212                                 "8M(bootstrap/uboot/kernel)ro,-(rootfs) " \
 213                                 "root=/dev/mmcblk0p2 " \
 214                                 "rw rootfstype=ext4 rootwait"
 215 #else
 216 #define CONFIG_BOOTARGS                                                 \
 217         "console=ttyS0,115200 earlyprintk "                             \
 218         "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"          \
 219         "256k(env),256k(env_redundant),256k(spare),"                    \
 220         "512k(dtb),6M(kernel)ro,-(rootfs) "                             \
 221         "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw"
 222 #endif
 223
 224 #define CONFIG_BAUDRATE         115200
 225
 226 #define CONFIG_SYS_CBSIZE       256
 227 #define CONFIG_SYS_MAXARGS      16
 228 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) \
 229                                         + 16)
 230 #define CONFIG_SYS_LONGHELP
 231 #define CONFIG_CMDLINE_EDITING
 232 #define CONFIG_AUTO_COMPLETE
 233 #define CONFIG_SYS_HUSH_PARSER
 234
 235 /*
 236  * Size of malloc() pool
 237  */
 238 #define CONFIG_SYS_MALLOC_LEN           (512 * 1024 + 0x1000)
 239
 240 /* SPL */
 241 #define CONFIG_SPL_FRAMEWORK
 242 #define CONFIG_SPL_TEXT_BASE            0x300000
 243 #define CONFIG_SPL_MAX_SIZE             0x6000
 244 #define CONFIG_SPL_STACK                0x308000
 245
 246 #define CONFIG_SPL_BSS_START_ADDR       0x20000000
 247 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
 248 #define CONFIG_SYS_SPL_MALLOC_START     0x20080000
 249 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x80000
 250
 251 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 252 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 253 #define CONFIG_SPL_GPIO_SUPPORT
 254 #define CONFIG_SPL_SERIAL_SUPPORT
 255
 256 #define CONFIG_SPL_BOARD_INIT
 257 #define CONFIG_SYS_MONITOR_LEN          (512 << 10)
 258
 259 #define CONFIG_SYS_MASTER_CLOCK         132096000
 260 #define CONFIG_SYS_AT91_PLLA            0x20c73f03
 261 #define CONFIG_SYS_MCKR                 0x1301
 262 #define CONFIG_SYS_MCKR_CSS             0x1302
 263
 264 #ifdef CONFIG_SYS_USE_MMC
 265 #define CONFIG_SPL_LDSCRIPT             arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
 266 #define CONFIG_SPL_MMC_SUPPORT
 267 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x400
 268 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
 269 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
 270 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME         "u-boot.img"
 271 #define CONFIG_SPL_FAT_SUPPORT
 272 #define CONFIG_SPL_LIBDISK_SUPPORT
 273
 274 #elif CONFIG_SYS_USE_NANDFLASH
 275 #define CONFIG_SPL_NAND_SUPPORT
 276 #define CONFIG_SPL_NAND_DRIVERS
 277 #define CONFIG_SPL_NAND_BASE
 278 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x40000
 279 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 280 #define CONFIG_SYS_NAND_PAGE_SIZE       0x800
 281 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 282 #define CONFIG_SYS_NAND_OOBSIZE         64
 283 #define CONFIG_SYS_NAND_BLOCK_SIZE      0x20000
 284 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0x0
 285 #define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
 286
 287 #elif CONFIG_SYS_USE_SPIFLASH
 288 #define CONFIG_SPL_SPI_SUPPORT
 289 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 290 #define CONFIG_SPL_SPI_LOAD
 291 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x8400
 292
 293 #endif
 294
 295 #endif