include/configs/cgtqmx6eval.h

   1 /*
   2  *
   3  * Congatec Conga-QEVAl board configuration file.
   4  *
   5  * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
   6  * Based on Freescale i.MX6Q Sabre Lite board configuration file.
   7  * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
   8  * Leo Sartre, <lsartre@adeneo-embedded.com>
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef __CONFIG_CGTQMX6EVAL_H
  14 #define __CONFIG_CGTQMX6EVAL_H
  15
  16 #include "mx6_common.h"
  17
  18 #define CONFIG_MACH_TYPE        4122
  19
  20 /* Size of malloc() pool */
  21 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  22
  23 #define CONFIG_BOARD_EARLY_INIT_F
  24 #define CONFIG_MISC_INIT_R
  25
  26 #define CONFIG_MXC_UART
  27 #define CONFIG_MXC_UART_BASE           UART2_BASE
  28
  29 /* MMC Configs */
  30 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  31
  32 /* Miscellaneous commands */
  33 #define CONFIG_CMD_BMODE
  34
  35 /* Thermal support */
  36 #define CONFIG_IMX6_THERMAL
  37
  38 #define CONFIG_CMD_FUSE
  39 #if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
  40 #define CONFIG_MXC_OCOTP
  41 #endif
  42
  43 /* I2C Configs */
  44 #define CONFIG_CMD_I2C
  45 #define CONFIG_SYS_I2C
  46 #define CONFIG_SYS_I2C_MXC
  47 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  48 #define CONFIG_SYS_I2C_SPEED              100000
  49
  50 /* PMIC */
  51 #define CONFIG_POWER
  52 #define CONFIG_POWER_I2C
  53 #define CONFIG_POWER_PFUZE100
  54 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
  55
  56 /* USB Configs */
  57 #define CONFIG_CMD_USB
  58 #define CONFIG_CMD_FAT
  59 #define CONFIG_USB_EHCI
  60 #define CONFIG_USB_EHCI_MX6
  61 #define CONFIG_USB_STORAGE
  62 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  63 #define CONFIG_USB_HOST_ETHER
  64 #define CONFIG_USB_ETHER_ASIX
  65 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
  66 #define CONFIG_MXC_USB_FLAGS    0
  67 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB controller number */
  68 #define CONFIG_USB_KEYBOARD
  69 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
  70
  71 /* Framebuffer */
  72 #define CONFIG_VIDEO
  73 #define CONFIG_VIDEO_IPUV3
  74 #define CONFIG_CFB_CONSOLE
  75 #define CONFIG_VGA_AS_SINGLE_DEVICE
  76 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  77 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
  78 #define CONFIG_VIDEO_BMP_RLE8
  79 #define CONFIG_SPLASH_SCREEN
  80 #define CONFIG_SPLASH_SCREEN_ALIGN
  81 #define CONFIG_BMP_16BPP
  82 #define CONFIG_VIDEO_LOGO
  83 #define CONFIG_VIDEO_BMP_LOGO
  84 #ifdef CONFIG_MX6DL
  85 #define CONFIG_IPUV3_CLK 198000000
  86 #else
  87 #define CONFIG_IPUV3_CLK 264000000
  88 #endif
  89 #define CONFIG_IMX_HDMI
  90
  91 /* SATA */
  92 #define CONFIG_CMD_SATA
  93 #define CONFIG_DWC_AHSATA
  94 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  95 #define CONFIG_DWC_AHSATA_PORT_ID       0
  96 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  97 #define CONFIG_LBA48
  98 #define CONFIG_LIBATA
  99
 100 /* Command definition */
 101
 102 #define CONFIG_MXC_UART_BASE    UART2_BASE
 103 #define CONFIG_CONSOLE_DEV      "ttymxc1"
 104 #define CONFIG_MMCROOT          "/dev/mmcblk0p2"
 105 #define CONFIG_SYS_MMC_ENV_DEV          0
 106
 107 #define CONFIG_EXTRA_ENV_SETTINGS \
 108         "script=boot.scr\0" \
 109         "image=zImage\0" \
 110         "fdtfile=imx6q-qmx6.dtb\0" \
 111         "fdt_addr_r=0x18000000\0" \
 112         "boot_fdt=try\0" \
 113         "ip_dyn=yes\0" \
 114         "console=" CONFIG_CONSOLE_DEV "\0" \
 115         "bootm_size=0x10000000\0" \
 116         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 117         "mmcpart=1\0" \
 118         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 119         "update_sd_firmware=" \
 120                 "if test ${ip_dyn} = yes; then " \
 121                         "setenv get_cmd dhcp; " \
 122                 "else " \
 123                         "setenv get_cmd tftp; " \
 124                 "fi; " \
 125                 "if mmc dev ${mmcdev}; then "   \
 126                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 127                                 "setexpr fw_sz ${filesize} / 0x200; " \
 128                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 129                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 130                         "fi; "  \
 131                 "fi\0" \
 132         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 133                 "root=${mmcroot}\0" \
 134         "loadbootscript=" \
 135                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 136         "bootscript=echo Running bootscript from mmc ...; " \
 137                 "source\0" \
 138         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 139         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \
 140         "mmcboot=echo Booting from mmc ...; " \
 141                 "run mmcargs; " \
 142                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 143                         "if run loadfdt; then " \
 144                                 "bootz ${loadaddr} - ${fdt_addr_r}; " \
 145                         "else " \
 146                                 "if test ${boot_fdt} = try; then " \
 147                                         "bootz; " \
 148                                 "else " \
 149                                         "echo WARN: Cannot load the DT; " \
 150                                 "fi; " \
 151                         "fi; " \
 152                 "else " \
 153                         "bootz; " \
 154                 "fi;\0" \
 155         "netargs=setenv bootargs console=${console},${baudrate} " \
 156                 "root=/dev/nfs " \
 157                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 158         "netboot=echo Booting from net ...; " \
 159                 "run netargs; " \
 160                 "if test ${ip_dyn} = yes; then " \
 161                         "setenv get_cmd dhcp; " \
 162                 "else " \
 163                         "setenv get_cmd tftp; " \
 164                 "fi; " \
 165                 "${get_cmd} ${image}; " \
 166                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 167                         "if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then " \
 168                                 "bootz ${loadaddr} - ${fdt_addr_r}; " \
 169                         "else " \
 170                                 "if test ${boot_fdt} = try; then " \
 171                                         "bootz; " \
 172                                 "else " \
 173                                         "echo WARN: Cannot load the DT; " \
 174                                 "fi; " \
 175                         "fi; " \
 176                 "else " \
 177                         "bootz; " \
 178                 "fi;\0" \
 179
 180 #define CONFIG_BOOTCOMMAND \
 181         "mmc dev ${mmcdev};" \
 182         "if mmc rescan; then " \
 183                 "if run loadbootscript; then " \
 184                 "run bootscript; " \
 185                 "else " \
 186                         "if run loadimage; then " \
 187                                 "run mmcboot; " \
 188                         "else run netboot; " \
 189                         "fi; " \
 190                 "fi; " \
 191         "else run netboot; fi"
 192
 193 #define CONFIG_SYS_MEMTEST_START       0x10000000
 194 #define CONFIG_SYS_MEMTEST_END         0x10010000
 195 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 196
 197 /* Physical Memory Map */
 198 #define CONFIG_NR_DRAM_BANKS           1
 199 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 200 #define PHYS_SDRAM_SIZE                        (1u * 1024 * 1024 * 1024)
 201
 202 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 203 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 204 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 205
 206 #define CONFIG_SYS_INIT_SP_OFFSET \
 207         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 208 #define CONFIG_SYS_INIT_SP_ADDR \
 209         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 210
 211 /* Environment organization */
 212 #define CONFIG_ENV_SIZE                 (8 * 1024)
 213
 214 #define CONFIG_ENV_IS_IN_MMC
 215
 216 #define CONFIG_ENV_OFFSET               (6 * 64 * 1024)
 217 #define CONFIG_SYS_MMC_ENV_DEV          0
 218
 219 #endif                         /* __CONFIG_CGTQMX6EVAL_H */