include/configs/cm_fx6.h

   1 /*
   2  * Config file for Compulab CM-FX6 board
   3  *
   4  * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
   5  *
   6  * Author: Nikita Kiryanov <nikita@compulab.co.il>
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #ifndef __CONFIG_CM_FX6_H
  12 #define __CONFIG_CM_FX6_H
  13
  14 #include <asm/arch/imx-regs.h>
  15 #include <config_distro_defaults.h>
  16 #include "mx6_common.h"
  17
  18 /* Machine config */
  19 #define CONFIG_MX6
  20 #define CONFIG_SYS_LITTLE_ENDIAN
  21 #define CONFIG_MACH_TYPE                4273
  22 #define CONFIG_SYS_HZ                   1000
  23
  24 /* Display information on boot */
  25 #define CONFIG_DISPLAY_CPUINFO
  26 #define CONFIG_DISPLAY_BOARDINFO
  27 #define CONFIG_TIMESTAMP
  28
  29 /* CMD */
  30 #include <config_cmd_default.h>
  31 #define CONFIG_CMD_GREPENV
  32 #undef CONFIG_CMD_FLASH
  33 #undef CONFIG_CMD_LOADB
  34 #undef CONFIG_CMD_LOADS
  35 #undef CONFIG_CMD_XIMG
  36 #undef CONFIG_CMD_FPGA
  37 #undef CONFIG_CMD_IMLS
  38
  39 /* MMC */
  40 #define CONFIG_MMC
  41 #define CONFIG_CMD_MMC
  42 #define CONFIG_GENERIC_MMC
  43 #define CONFIG_FSL_ESDHC
  44 #define CONFIG_FSL_USDHC
  45 #define CONFIG_SYS_FSL_USDHC_NUM        3
  46 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
  47
  48 /* RAM */
  49 #define PHYS_SDRAM_1                    MMDC0_ARB_BASE_ADDR
  50 #define PHYS_SDRAM_2                    MMDC1_ARB_BASE_ADDR
  51 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  52 #define CONFIG_NR_DRAM_BANKS            2
  53 #define CONFIG_SYS_MEMTEST_START        0x10000000
  54 #define CONFIG_SYS_MEMTEST_END          0x10010000
  55 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  56 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  57 #define CONFIG_SYS_INIT_SP_OFFSET \
  58         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  59 #define CONFIG_SYS_INIT_SP_ADDR \
  60         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  61
  62 /* Serial console */
  63 #define CONFIG_MXC_UART
  64 #define CONFIG_MXC_UART_BASE            UART4_BASE
  65 #define CONFIG_BAUDRATE                 115200
  66 #define CONFIG_SYS_BAUDRATE_TABLE       {9600, 19200, 38400, 57600, 115200}
  67
  68 /* Shell */
  69 #define CONFIG_SYS_PROMPT       "CM-FX6 # "
  70 #define CONFIG_SYS_CBSIZE       1024
  71 #define CONFIG_SYS_MAXARGS      16
  72 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
  73 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE + \
  74                                         sizeof(CONFIG_SYS_PROMPT) + 16)
  75
  76 /* SPI flash */
  77 #define CONFIG_SYS_NO_FLASH
  78 #define CONFIG_CMD_SF
  79 #define CONFIG_SF_DEFAULT_BUS           0
  80 #define CONFIG_SF_DEFAULT_CS            0
  81 #define CONFIG_SF_DEFAULT_SPEED         25000000
  82 #define CONFIG_SF_DEFAULT_MODE          (SPI_MODE_0)
  83
  84 /* Environment */
  85 #define CONFIG_ENV_OVERWRITE
  86 #define CONFIG_ENV_IS_IN_SPI_FLASH
  87 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
  88 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
  89 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
  90 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
  91 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
  92 #define CONFIG_ENV_SIZE                 (8 * 1024)
  93 #define CONFIG_ENV_OFFSET               (768 * 1024)
  94
  95 #define CONFIG_EXTRA_ENV_SETTINGS \
  96         "kernel=uImage-cm-fx6\0" \
  97         "autoload=no\0" \
  98         "loadaddr=0x10800000\0" \
  99         "fdtaddr=0x11000000\0" \
 100         "console=ttymxc3,115200\0" \
 101         "ethprime=FEC0\0" \
 102         "bootscr=boot.scr\0" \
 103         "bootm_low=18000000\0" \
 104         "video_hdmi=mxcfb0:dev=hdmi,1920x1080M-32@50,if=RGB32\0" \
 105         "video_dvi=mxcfb0:dev=dvi,1280x800M-32@50,if=RGB32\0" \
 106         "fdtfile=cm-fx6.dtb\0" \
 107         "doboot=bootm ${loadaddr}\0" \
 108         "loadfdt=false\0" \
 109         "setboottypez=setenv kernel zImage-cm-fx6;" \
 110                 "setenv doboot bootz ${loadaddr} - ${fdtaddr};" \
 111                 "setenv loadfdt true;\0" \
 112         "setboottypem=setenv kernel uImage-cm-fx6;" \
 113                 "setenv doboot bootm ${loadaddr};" \
 114                 "setenv loadfdt false;\0"\
 115         "run_eboot=echo Starting EBOOT ...; "\
 116                 "mmc dev ${mmcdev} && " \
 117                 "mmc rescan && mmc read 10042000 a 400 && go 10042000\0" \
 118         "mmcdev=2\0" \
 119         "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
 120         "loadmmcbootscript=load mmc ${mmcdev} ${loadaddr} ${bootscr}\0" \
 121         "mmcbootscript=echo Running bootscript from mmc ...; "\
 122                 "source ${loadaddr}\0" \
 123         "mmcargs=setenv bootargs console=${console} " \
 124                 "root=${mmcroot} " \
 125                 "${video}\0" \
 126         "mmcloadkernel=load mmc ${mmcdev} ${loadaddr} ${kernel}\0" \
 127         "mmcloadfdt=load mmc ${mmcdev} ${fdtaddr} ${fdtfile}\0" \
 128         "mmcboot=echo Booting from mmc ...; " \
 129                 "run mmcargs; " \
 130                 "run doboot\0" \
 131         "satadev=0\0" \
 132         "sataroot=/dev/sda2 rw rootwait\0" \
 133         "sataargs=setenv bootargs console=${console} " \
 134                 "root=${sataroot} " \
 135                 "${video}\0" \
 136         "loadsatabootscript=load sata ${satadev} ${loadaddr} ${bootscr}\0" \
 137         "satabootscript=echo Running bootscript from sata ...; " \
 138                 "source ${loadaddr}\0" \
 139         "sataloadkernel=load sata ${satadev} ${loadaddr} ${kernel}\0" \
 140         "sataloadfdt=load sata ${satadev} ${fdtaddr} ${fdtfile}\0" \
 141         "sataboot=echo Booting from sata ...; "\
 142                 "run sataargs; " \
 143                 "run doboot\0" \
 144         "nandroot=/dev/mtdblock4 rw\0" \
 145         "nandrootfstype=ubifs\0" \
 146         "nandargs=setenv bootargs console=${console} " \
 147                 "root=${nandroot} " \
 148                 "rootfstype=${nandrootfstype} " \
 149                 "${video}\0" \
 150         "nandloadfdt=nand read ${fdtaddr} 780000 80000;\0" \
 151         "nandboot=echo Booting from nand ...; " \
 152                 "run nandargs; " \
 153                 "nand read ${loadaddr} 0 780000; " \
 154                 "if ${loadfdt}; then " \
 155                         "run nandloadfdt;" \
 156                 "fi; " \
 157                 "run doboot\0" \
 158         "boot=mmc dev ${mmcdev}; " \
 159                 "if mmc rescan; then " \
 160                         "if run loadmmcbootscript; then " \
 161                                 "run mmcbootscript;" \
 162                         "else " \
 163                                 "if run mmcloadkernel; then " \
 164                                         "if ${loadfdt}; then " \
 165                                                 "run mmcloadfdt;" \
 166                                         "fi;" \
 167                                         "run mmcboot;" \
 168                                 "fi;" \
 169                         "fi;" \
 170                 "fi;" \
 171                 "if sata init; then " \
 172                         "if run loadsatabootscript; then " \
 173                                 "run satabootscript;" \
 174                         "else "\
 175                                 "if run sataloadkernel; then " \
 176                                         "if ${loadfdt}; then " \
 177                                                 "run sataloadfdt; " \
 178                                         "fi;" \
 179                                         "run sataboot;" \
 180                                 "fi;" \
 181                         "fi;" \
 182                 "fi;" \
 183                 "run nandboot\0"
 184
 185 #define CONFIG_BOOTCOMMAND \
 186         "run setboottypem; run boot"
 187
 188 /* SPI */
 189 #define CONFIG_SPI
 190 #define CONFIG_MXC_SPI
 191 #define CONFIG_SPI_FLASH
 192 #define CONFIG_SPI_FLASH_ATMEL
 193 #define CONFIG_SPI_FLASH_EON
 194 #define CONFIG_SPI_FLASH_GIGADEVICE
 195 #define CONFIG_SPI_FLASH_MACRONIX
 196 #define CONFIG_SPI_FLASH_SPANSION
 197 #define CONFIG_SPI_FLASH_STMICRO
 198 #define CONFIG_SPI_FLASH_SST
 199 #define CONFIG_SPI_FLASH_WINBOND
 200
 201 /* NAND */
 202 #ifndef CONFIG_SPL_BUILD
 203 #define CONFIG_CMD_NAND
 204 #define CONFIG_SYS_NAND_BASE            0x40000000
 205 #define CONFIG_SYS_NAND_MAX_CHIPS       1
 206 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 207 #define CONFIG_NAND_MXS
 208 #define CONFIG_SYS_NAND_ONFI_DETECTION
 209 /* APBH DMA is required for NAND support */
 210 #define CONFIG_APBH_DMA
 211 #define CONFIG_APBH_DMA_BURST
 212 #define CONFIG_APBH_DMA_BURST8
 213 #endif
 214
 215 /* Ethernet */
 216 #define CONFIG_FEC_MXC
 217 #define CONFIG_FEC_MXC_PHYADDR          0
 218 #define CONFIG_FEC_XCV_TYPE             RGMII
 219 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 220 #define CONFIG_PHYLIB
 221 #define CONFIG_PHY_ATHEROS
 222 #define CONFIG_MII
 223 #define CONFIG_ETHPRIME                 "FEC0"
 224 #define CONFIG_ARP_TIMEOUT              200UL
 225 #define CONFIG_NET_RETRY_COUNT          5
 226
 227 /* USB */
 228 #define CONFIG_CMD_USB
 229 #define CONFIG_USB_EHCI
 230 #define CONFIG_USB_EHCI_MX6
 231 #define CONFIG_USB_STORAGE
 232 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 233 #define CONFIG_MXC_USB_FLAGS            0
 234 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 235 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
 236
 237 /* I2C */
 238 #define CONFIG_CMD_I2C
 239 #define CONFIG_SYS_I2C
 240 #define CONFIG_SYS_I2C_MXC
 241 #define CONFIG_SYS_I2C_SPEED            100000
 242 #define CONFIG_SYS_MXC_I2C3_SPEED       400000
 243
 244 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 245 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 246 #define CONFIG_SYS_I2C_EEPROM_BUS       2
 247
 248 /* SATA */
 249 #define CONFIG_CMD_SATA
 250 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 251 #define CONFIG_LIBATA
 252 #define CONFIG_LBA48
 253 #define CONFIG_DWC_AHSATA
 254 #define CONFIG_DWC_AHSATA_PORT_ID       0
 255 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
 256
 257 /* GPIO */
 258 #define CONFIG_MXC_GPIO
 259
 260 /* Boot */
 261 #define CONFIG_ZERO_BOOTDELAY_CHECK
 262 #define CONFIG_LOADADDR                 0x10800000
 263 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 264 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
 265 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)
 266 #define CONFIG_SETUP_MEMORY_TAGS
 267 #define CONFIG_INITRD_TAG
 268 #define CONFIG_REVISION_TAG
 269 #define CONFIG_SERIAL_TAG
 270
 271 /* misc */
 272 #define CONFIG_SYS_GENERIC_BOARD
 273 #define CONFIG_STACKSIZE                        (128 * 1024)
 274 #define CONFIG_SYS_MALLOC_LEN                   (2 * 1024 * 1024)
 275 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      800 /* 400 KB */
 276 #define CONFIG_OF_BOARD_SETUP
 277
 278 /* SPL */
 279 #include "imx6_spl.h"
 280 #define CONFIG_SPL_BOARD_INIT
 281 #define CONFIG_SPL_MMC_SUPPORT
 282 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x80 /* offset 64 kb */
 283 #define CONFIG_SYS_MONITOR_LEN  (CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS / 2 * 1024)
 284 #define CONFIG_SPL_SPI_SUPPORT
 285 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 286 #define CONFIG_SYS_SPI_U_BOOT_OFFS      (64 * 1024)
 287 #define CONFIG_SPL_SPI_LOAD
 288
 289 #endif  /* __CONFIG_CM_FX6_H */