include/configs/cm_t35.h

   1 /*
   2  * (C) Copyright 2011 CompuLab, Ltd.
   3  * Mike Rapoport <mike@compulab.co.il>
   4  * Igor Grinberg <grinberg@compulab.co.il>
   5  *
   6  * Based on omap3_beagle.h
   7  * (C) Copyright 2006-2008
   8  * Texas Instruments.
   9  * Richard Woodruff <r-woodruff2@ti.com>
  10  * Syed Mohammed Khasim <x0khasim@ti.com>
  11  *
  12  * Configuration settings for the CompuLab CM-T35 and CM-T3730 boards
  13  *
  14  * SPDX-License-Identifier:     GPL-2.0+
  15  */
  16
  17 #ifndef __CONFIG_H
  18 #define __CONFIG_H
  19
  20 /*
  21  * High Level Configuration Options
  22  */
  23 #define CONFIG_OMAP     /* in a TI OMAP core */
  24 #define CONFIG_OMAP34XX /* which is a 34XX */
  25 #define CONFIG_OMAP_GPIO
  26 #define CONFIG_CM_T3X   /* working with CM-T35 and CM-T3730 */
  27 #define CONFIG_OMAP_COMMON
  28
  29 #define CONFIG_SYS_TEXT_BASE    0x80008000
  30
  31 #define CONFIG_SDRC     /* The chip has SDRC controller */
  32
  33 #include <asm/arch/cpu.h>               /* get chip and board defs */
  34 #include <asm/arch/omap3.h>
  35
  36 /*
  37  * Display CPU and Board information
  38  */
  39 #define CONFIG_DISPLAY_CPUINFO
  40 #define CONFIG_DISPLAY_BOARDINFO
  41
  42 /* Clock Defines */
  43 #define V_OSCK                  26000000        /* Clock output from T2 */
  44 #define V_SCLK                  (V_OSCK >> 1)
  45
  46 #define CONFIG_MISC_INIT_R
  47
  48 #define CONFIG_OF_LIBFDT                1
  49 /*
  50  * The early kernel mapping on ARM currently only maps from the base of DRAM
  51  * to the end of the kernel image.  The kernel is loaded at DRAM base + 0x8000.
  52  * The early kernel pagetable uses DRAM base + 0x4000 to DRAM base + 0x8000,
  53  * so that leaves DRAM base to DRAM base + 0x4000 available.
  54  */
  55 #define CONFIG_SYS_BOOTMAPSZ            0x4000
  56
  57 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  58 #define CONFIG_SETUP_MEMORY_TAGS
  59 #define CONFIG_INITRD_TAG
  60 #define CONFIG_REVISION_TAG
  61 #define CONFIG_SERIAL_TAG
  62
  63 /*
  64  * Size of malloc() pool
  65  */
  66 #define CONFIG_ENV_SIZE         (16 << 10)      /* 16 KiB */
  67                                         /* Sector */
  68 #define CONFIG_SYS_MALLOC_LEN   (CONFIG_ENV_SIZE + (128 << 10))
  69
  70 /*
  71  * Hardware drivers
  72  */
  73
  74 /*
  75  * NS16550 Configuration
  76  */
  77 #define V_NS16550_CLK                   48000000        /* 48MHz (APLL96/2) */
  78
  79 #define CONFIG_SYS_NS16550
  80 #define CONFIG_SYS_NS16550_SERIAL
  81 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  82 #define CONFIG_SYS_NS16550_CLK          V_NS16550_CLK
  83
  84 /*
  85  * select serial console configuration
  86  */
  87 #define CONFIG_CONS_INDEX               3
  88 #define CONFIG_SYS_NS16550_COM3         OMAP34XX_UART3
  89 #define CONFIG_SERIAL3                  3       /* UART3 */
  90
  91 /* allow to overwrite serial and ethaddr */
  92 #define CONFIG_ENV_OVERWRITE
  93 #define CONFIG_BAUDRATE                 115200
  94 #define CONFIG_SYS_BAUDRATE_TABLE       {4800, 9600, 19200, 38400, 57600,\
  95                                         115200}
  96
  97 #define CONFIG_GENERIC_MMC
  98 #define CONFIG_MMC
  99 #define CONFIG_OMAP_HSMMC
 100 #define CONFIG_DOS_PARTITION
 101
 102 /* USB */
 103 #define CONFIG_USB_OMAP3
 104 #define CONFIG_USB_EHCI
 105 #define CONFIG_USB_EHCI_OMAP
 106 #define CONFIG_USB_ULPI
 107 #define CONFIG_USB_ULPI_VIEWPORT_OMAP
 108 #define CONFIG_USB_STORAGE
 109 #define CONFIG_MUSB_UDC
 110 #define CONFIG_TWL4030_USB
 111 #define CONFIG_CMD_USB
 112
 113 /* USB device configuration */
 114 #define CONFIG_USB_DEVICE
 115 #define CONFIG_USB_TTY
 116 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 117
 118 /* commands to include */
 119 #include <config_cmd_default.h>
 120
 121 #define CONFIG_CMD_CACHE
 122 #define CONFIG_CMD_EXT2         /* EXT2 Support                 */
 123 #define CONFIG_CMD_FAT          /* FAT support                  */
 124 #define CONFIG_CMD_MTDPARTS     /* Enable MTD parts commands */
 125 #define CONFIG_MTD_DEVICE       /* needed for mtdparts commands */
 126 #define CONFIG_MTD_PARTITIONS
 127 #define MTDIDS_DEFAULT          "nand0=nand"
 128 #define MTDPARTS_DEFAULT        "mtdparts=nand:512k(x-loader),"\
 129                                 "1920k(u-boot),256k(u-boot-env),"\
 130                                 "4m(kernel),-(fs)"
 131
 132 #define CONFIG_CMD_I2C          /* I2C serial bus support       */
 133 #define CONFIG_CMD_MMC          /* MMC support                  */
 134 #define CONFIG_CMD_NAND         /* NAND support                 */
 135 #define CONFIG_CMD_DHCP
 136 #define CONFIG_CMD_PING
 137
 138 #undef CONFIG_CMD_FLASH         /* flinfo, erase, protect       */
 139 #undef CONFIG_CMD_FPGA          /* FPGA configuration Support   */
 140 #undef CONFIG_CMD_IMLS          /* List all found images        */
 141
 142 #define CONFIG_SYS_NO_FLASH
 143 #define CONFIG_HARD_I2C
 144 #define CONFIG_SYS_I2C_SPEED            100000
 145 #define CONFIG_SYS_I2C_SLAVE            1
 146 #define CONFIG_DRIVER_OMAP34XX_I2C
 147 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 148 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 149 #define CONFIG_I2C_MULTI_BUS
 150
 151 /*
 152  * TWL4030
 153  */
 154 #define CONFIG_TWL4030_POWER
 155 #define CONFIG_TWL4030_LED
 156
 157 /*
 158  * Board NAND Info.
 159  */
 160 #define CONFIG_SYS_NAND_QUIET_TEST
 161 #define CONFIG_NAND_OMAP_GPMC
 162 #define CONFIG_SYS_NAND_ADDR            NAND_BASE       /* physical address */
 163                                                         /* to access nand */
 164 #define CONFIG_SYS_NAND_BASE            NAND_BASE       /* physical address */
 165                                                         /* to access nand at */
 166                                                         /* CS0 */
 167 #define GPMC_NAND_ECC_LP_x8_LAYOUT
 168
 169 #define CONFIG_SYS_MAX_NAND_DEVICE      1               /* Max number of NAND */
 170                                                         /* devices */
 171 /* Environment information */
 172 #define CONFIG_BOOTDELAY                10
 173 #define CONFIG_ZERO_BOOTDELAY_CHECK
 174
 175 #define CONFIG_EXTRA_ENV_SETTINGS \
 176         "loadaddr=0x82000000\0" \
 177         "usbtty=cdc_acm\0" \
 178         "console=ttyS2,115200n8\0" \
 179         "mpurate=500\0" \
 180         "vram=12M\0" \
 181         "dvimode=1024x768MR-16@60\0" \
 182         "defaultdisplay=dvi\0" \
 183         "mmcdev=0\0" \
 184         "mmcroot=/dev/mmcblk0p2 rw\0" \
 185         "mmcrootfstype=ext4 rootwait\0" \
 186         "nandroot=/dev/mtdblock4 rw\0" \
 187         "nandrootfstype=ubifs\0" \
 188         "mmcargs=setenv bootargs console=${console} " \
 189                 "mpurate=${mpurate} " \
 190                 "vram=${vram} " \
 191                 "omapfb.mode=dvi:${dvimode} " \
 192                 "omapfb.debug=y " \
 193                 "omapdss.def_disp=${defaultdisplay} " \
 194                 "root=${mmcroot} " \
 195                 "rootfstype=${mmcrootfstype}\0" \
 196         "nandargs=setenv bootargs console=${console} " \
 197                 "mpurate=${mpurate} " \
 198                 "vram=${vram} " \
 199                 "omapfb.mode=dvi:${dvimode} " \
 200                 "omapfb.debug=y " \
 201                 "omapdss.def_disp=${defaultdisplay} " \
 202                 "root=${nandroot} " \
 203                 "rootfstype=${nandrootfstype}\0" \
 204         "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
 205         "bootscript=echo Running bootscript from mmc ...; " \
 206                 "source ${loadaddr}\0" \
 207         "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
 208         "mmcboot=echo Booting from mmc ...; " \
 209                 "run mmcargs; " \
 210                 "bootm ${loadaddr}\0" \
 211         "nandboot=echo Booting from nand ...; " \
 212                 "run nandargs; " \
 213                 "nand read ${loadaddr} 2a0000 400000; " \
 214                 "bootm ${loadaddr}\0" \
 215
 216 #define CONFIG_BOOTCOMMAND \
 217         "mmc dev ${mmcdev}; if mmc rescan; then " \
 218                 "if run loadbootscript; then " \
 219                         "run bootscript; " \
 220                 "else " \
 221                         "if run loaduimage; then " \
 222                                 "run mmcboot; " \
 223                         "else run nandboot; " \
 224                         "fi; " \
 225                 "fi; " \
 226         "else run nandboot; fi"
 227
 228 /*
 229  * Miscellaneous configurable options
 230  */
 231 #define CONFIG_AUTO_COMPLETE
 232 #define CONFIG_CMDLINE_EDITING
 233 #define CONFIG_TIMESTAMP
 234 #define CONFIG_SYS_AUTOLOAD             "no"
 235 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 236 #define CONFIG_SYS_HUSH_PARSER          /* use "hush" command parser */
 237 #define CONFIG_SYS_PROMPT               "CM-T3x # "
 238 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 239 /* Print Buffer Size */
 240 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 241                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 242 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 243 /* Boot Argument Buffer Size */
 244 #define CONFIG_SYS_BARGSIZE             (CONFIG_SYS_CBSIZE)
 245
 246 #define CONFIG_SYS_MEMTEST_START        (OMAP34XX_SDRC_CS0)     /* memtest */
 247                                                                 /* works on */
 248 #define CONFIG_SYS_MEMTEST_END          (OMAP34XX_SDRC_CS0 + \
 249                                         0x01F00000) /* 31MB */
 250
 251 #define CONFIG_SYS_LOAD_ADDR            (OMAP34XX_SDRC_CS0)     /* default */
 252                                                         /* load address */
 253
 254 /*
 255  * OMAP3 has 12 GP timers, they can be driven by the system clock
 256  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
 257  * This rate is divided by a local divisor.
 258  */
 259 #define CONFIG_SYS_TIMERBASE            (OMAP34XX_GPT2)
 260 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
 261 #define CONFIG_SYS_HZ                   1000
 262
 263 /*-----------------------------------------------------------------------
 264  * Physical Memory Map
 265  */
 266 #define CONFIG_NR_DRAM_BANKS    1       /* CS1 is never populated */
 267 #define PHYS_SDRAM_1            OMAP34XX_SDRC_CS0
 268
 269 /*-----------------------------------------------------------------------
 270  * FLASH and environment organization
 271  */
 272
 273 /* **** PISMO SUPPORT *** */
 274 /* Configure the PISMO */
 275 #define PISMO1_NAND_SIZE                GPMC_SIZE_128M
 276
 277 /* Monitor at start of flash */
 278 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
 279 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 2 sectors */
 280
 281 #define CONFIG_ENV_IS_IN_NAND
 282 #define SMNAND_ENV_OFFSET               0x260000 /* environment starts here */
 283 #define CONFIG_ENV_OFFSET               SMNAND_ENV_OFFSET
 284 #define CONFIG_ENV_ADDR                 SMNAND_ENV_OFFSET
 285
 286 #if defined(CONFIG_CMD_NET)
 287 #define CONFIG_SMC911X
 288 #define CONFIG_SMC911X_32_BIT
 289 #define CM_T3X_SMC911X_BASE     0x2C000000
 290 #define SB_T35_SMC911X_BASE     (CM_T3X_SMC911X_BASE + (16 << 20))
 291 #define CONFIG_SMC911X_BASE     CM_T3X_SMC911X_BASE
 292 #endif /* (CONFIG_CMD_NET) */
 293
 294 /* additions for new relocation code, must be added to all boards */
 295 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 296 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
 297 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
 298 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR +     \
 299                                          CONFIG_SYS_INIT_RAM_SIZE -     \
 300                                          GENERATED_GBL_DATA_SIZE)
 301
 302 /* Status LED */
 303 #define CONFIG_STATUS_LED               /* Status LED enabled */
 304 #define CONFIG_BOARD_SPECIFIC_LED
 305 #define STATUS_LED_GREEN                0
 306 #define STATUS_LED_BIT                  STATUS_LED_GREEN
 307 #define STATUS_LED_STATE                STATUS_LED_ON
 308 #define STATUS_LED_PERIOD               (CONFIG_SYS_HZ / 2)
 309 #define STATUS_LED_BOOT                 STATUS_LED_BIT
 310 #define GREEN_LED_GPIO                  186 /* CM-T35 Green LED is GPIO186 */
 311
 312 #define CONFIG_SPLASHIMAGE_GUARD
 313
 314 /* GPIO banks */
 315 #ifdef CONFIG_STATUS_LED
 316 #define CONFIG_OMAP3_GPIO_6     /* GPIO186 is in GPIO bank 6  */
 317 #endif
 318
 319 /* Display Configuration */
 320 #define CONFIG_OMAP3_GPIO_2
 321 #define CONFIG_VIDEO_OMAP3
 322 #define LCD_BPP         LCD_COLOR16
 323
 324 #define CONFIG_LCD
 325 #define CONFIG_SPLASH_SCREEN
 326 #define CONFIG_CMD_BMP
 327 #define CONFIG_BMP_16BPP
 328
 329 #endif /* __CONFIG_H */